Gpo PR200 User Manual
USER MANUAL
PR200
GPO PR200_user_Manual EU - Oct 2017.indd 1 26/10/2017 10:07
V1 | OCT 2017
GPO PR200_user_Manual EU - Oct 2017.indd 2 26/10/2017 10:07
2
CONTENT
English 5
German 29
French 53
Dutch 77
Spanish 101
GPO PR200_user_Manual EU - Oct 2017.indd 3 26/10/2017 10:07
3
GPO PR200_user_Manual EU - Oct 2017.indd 4 26/10/2017 10:07
4
ENGLISH
GPO PR200_user_Manual EU - Oct 2017.indd 5 26/10/2017 10:07
55
Important safety instructions
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Refer all servicing to qualied service personnel.
• Do not expose the unit to dripping or splashing and make sure
that no objects lled with liquids, such as vases, are placed on it.
• Heat – The appliance should be put away from heat sources such
as radiators, heat, registers, stoves or other appliances (including
ampliers) that produce heat.
• Class I appliances must be connected to the mains socket outlet
with a protective-earth connection.
• The mains plug connects the device and should remain operable
during use.
• To disconnect the unit from the mains, the plug should be fully
disconnected from the mains socket outlet. The mains plug
should not be obstructed and should be easily accessible
during use.
• When a power indicator light is on, it indicates the unit is
connected to the mains supply. When the light is off, it indicates
the unit is fully disconnected from the mains supply.
GPO PR200_user_Manual EU - Oct 2017.indd 6 26/10/2017 10:07
6
• Damage Requiring Service: The appliance should be serviced by
qualied service personnel when:
- The power supply cord or the plug has been damaged
- Objects has been exposed to rain.
- The appliance does not appear to operate normally or exhibits a
marked change in performance.
- The appliance has been dropped, or the enclosure damaged.
What’s in the box
Check and identify the contents of your package:
• Head Unit PR200 (Amplier)
• 2 speakers
• Remote control 1 pc
• Instructions for use
• RCA cable (for connection to the device) 1 pc
GPO PR200_user_Manual EU - Oct 2017.indd 7 26/10/2017 10:07
7
MAIN UNIT PR200 (AMPLIFIER) & SPEAKERS
1. LCD Screen 14. Speaker Balance (L, R)
2. IR Sensor 15. Skip back (CD/ USB) & FM Tune
3. Right VU meter 16. SKIP forward(CD/ USB)
& FM Tune
4. Left VU meter 17. STOP button / MENU / INFO
5. Power ON/OFF & 18. Play and Pause / BT Pair
Function select button** (Bluetooth connection)
6. Headphone Jack 19. CD tray open/close
7. Aux in Jack (2) 20. Volume Control (Min / Max)
8. USB connection 21. FM Antenna
9. Mode ** 22. Line in connection (R / L )
10. record turntable connection
11. Bass 23. Aux In (1)
12. Treble 24 speaker connection (R / L )
13. CD player 25. power cable
** Function Select key (key 5):
Press this button to turn on the PR-200
Turn the key to select functions: Phono / AUX In1 / Aux In 2 / DAB / FM
Radio / CD / USB / BT **
Mode (key 9): Repeat 1 number, Repeat Folder, Repeat All Songs,
Random CD / USB
GPO PR200_user_Manual EU - Oct 2017.indd 8 26/10/2017 10:07
8
GPO PR200_user_Manual EU - Oct 2017.indd 9 26/10/2017 10:07
9
REMOTE CONTROL
1. Remove the battery cover from the back of the remote control.
2. Insert 2 AAA batteries. (Not included) Check the polarity (+ and symbols on the battery) and follow the instructions on the diagram
in the battery compartmentNOTE: Please make sure you properly
dispose of batteries (see your local regulations).
3. Replace the battery cover
4. User is advised to use Remote Control to operate most of the func-
tions for the main unit (amplier)
BATTERY REPLACEMENT
If the battery is low, the distance with which the remote is operating will
be greatly reduced, and you will need to replace the battery.
1. To use the remote control, point it to the IR sensor (10) and press
the button gently but rmly. Since the remote control range is reduced when the unit is used in an angle, try to direct it to the remote
sensor
2. Do not expose the distance sensor to strong light (direct sunshine
or articial light) and make sure there are no obstacles between the
remote sensor and the remote control
10
GPO PR200_user_Manual EU - Oct 2017.indd 10 26/10/2017 10:07
1. IR SENSOR
2. POWER ON/OFF
3. MODE- REPEAT(REPEAT ONE,
REPEAT ALL, REPEAT RANDOM)
4. FUNCTION
PHONO/ BLUETOOTH / AUX IN /
CD / USB / FM TUNER
5. TS
6. WDELETE
7. MENU/ INFO (FOR DAB/FM
RADIO)
8. REC RECORD
9. PLAY/PAUSE / BT PAIR /
ENTER
10. SKIP BACK BUTTON
11. STOP
12. VOLUME –
13. NUMERIC KEYS
(1–10, -10/+10)
14. CD OPEN / CLOSE
15. SET TIME / MEMORY
(FM,CD, USB)
16. MUTE
17. PRESET - / FOLDER -
18. PRESET + / FOLDER +
19. EQ (EQUALIZER : ROCK / POP/
CLASSIC / JAZZ/ OFF)
20. SKIP FORWARD
21. VOLUME +
22. BATTERY DOOR
GPO PR200_user_Manual EU - Oct 2017.indd 11 26/10/2017 10:07
11
POWER SUPPLY
This unit is designed to operate on a normal AC 100V ~ 240V, 50/60
Hz household power supply. Do not attempt to operate the system
using other power sources. This may result in damage to the unit and
void your warranty.
DAB MODE
Getting started
1. Press the Power button (2) by remote control to turn the unit on.
2. Press the Function (4) to enter DAB /FM Tuner by remote
control.
3. Fully Extend antenna on the back of your radio to get maximum
signal.
4. It will automatically scan for DAB radio stations. LCD Display will
show the scanning progress and the number of stations found. It
may take 2-3 minutes to nish, after all stations are stored, radio
will select the rst station & adjust the volume to play.
If DAB signal or desired station is not found, reception signal may be
poor. Please relocate your radio & tune the radio again.
12
GPO PR200_user_Manual EU - Oct 2017.indd 12 26/10/2017 10:07
5. Press or to select the station you would like to listen.
6. Presset Enter (9) to conrm what you choose to play
7. Press Memory (15) for 3 seconds to store station function & Enter
(9) to conrm the Memory stored
8. Press Memory (15) again to show back the stations you stored,
Press or to choose & Enter (9) to conrm to play.
9. Press MENU/ INFO (7) for 3 seconds to enter menu :
A Full scan; B. manual tune; C Prune; D. System : Language, factory
reset, SW version, by pressing ^a or ^a to choose the function and
Enter (9) to conrm
9A. Full scan : The unit will automatically scan for all DAB radio
stations. Go to Memory & or o select the station you
would like to listen.
9B. Manual Tune : Press to scan, then user can get the frequency.
9C. Prune : To trim DAB stations, you can remove the unreceived
stations on the DAB station lists. Press the Menu button , use
skip or to choose Prune function , Select the deleted
station. It will show Yes or No, Press Enter (9) to conrm the
station deleted . The inactive or unreceived station will be
removed from the list and replace d by a new station.
9D. System
To choose the below functions by using or and press Enter
(9) to conrm.
- Language : English , Deutsch, Italian & French.
- Factory reset – All presets will be erased
- DAB Version : You can get the software version form this : SW
version
10. Press MENU/INFO again to withdraw the function
11. The radio will store up to 20 DAB_ stations.
Note: If no DBA station has been stored, the radio will revert to the
former selected radio station.
GPO PR200_user_Manual EU - Oct 2017.indd 13 26/10/2017 10:07
13
12. The Signal Strength
a. Signal strength
LCD display will show the actual signal strength that user is now
receiving. When stations with the minimum signal level, it may not
provide a steady stream of audio. The more solid bars will indicate the
stronger signal of receiving power.
a. Dynamic label segment (DLS). This is scrolling text information
supplied by the broadcaster. The information could be the name
of an artist or music title. DJ’s name, contact details for the radio
station etc.
b. Mutiplex Name – Displays the broadcasting area and collection of
radio stations on the frequency e.g. BBC Footbal DAB, Station1
c. Channel & Frequency e.g. 14A 236 .578 MHz.
d. Signal error – If error signal occurs or signal is weak, Try to relocate
the radio & tune the channel again.
14
GPO PR200_user_Manual EU - Oct 2017.indd 14 26/10/2017 10:07
OPERATING THE RADIO (FM Mode)
A) Auto scan
- Press the Power button (2) by remote control to turn the unit on.
Press the Function (4) to FM Tuner by remote control. Press or
to switch from DAB to FM
- Press the Enter (9) by remote control to start the AUTO SCAN
function and automatically search for radio stations for 3 minutes. The
screen displays the digits and station numbers. Once complete, the
unit will store a maximum of 20 preset stations.
- Press the Memory and or by Remote Control Unit to search
for the desired station, Then press Enter (9) to conrm to play
B) Tuning
1. Turn the Power on (2)
2. Press the Function (4) to FM Tuner by remote control.
3. Press the SKIP for 3 seconds to automatically tune in to the
next station.
4. Adjust the Volume to the desired level.
5. Turn the Power off to turn the radio off.
C) Stations in memory positions P01 to P20
1. Press the Function (4) to FM Tuner by remote control.
2. Press the SKIP to automatically tune in to the next station.
3. Press MEMORY (15) by Remote Control Unit. The current position
number will ash in the display, e.g. ‘P01, P02… P20’.
4. Press the SKIP buttons to choose the track number you
wish to memorize
5. Press MEMORY button again to save. 20 radio stations can be
stored in memory.
GPO PR200_user_Manual EU - Oct 2017.indd 15 26/10/2017 10:07
15
6. Press Preset +/ - (Folder -/+) (17, 18) button by Remote Control
Unit to select and listen to a saved station.
Antenna
Extend the wire to obtain the best reception. You may need to turn or
change the position of the unit to improve reception.
CLOCK SET
1. Press Power button to turn off the unit and go to standby mode
( Clock mode)
2. Press CLOCK SET ( 5) by Remote Control Unit for 3 seconds. It
will show 24-hour format only.
3. The hour will blink. Press SKIP to set the hour.
4. Press the CLOCK SET (5) again: the minutes will blink. Press
SKIP to set the minutes. Press CLOCK SET button to nish
the time set.
16
GPO PR200_user_Manual EU - Oct 2017.indd 16 26/10/2017 10:07
BLUETOOTH PAIRING : Receiver
As Bluetooth receiver, main unit PR200 can receive music from user’s
Bluetooth mobile phone, Bluetooth MP3 and play music directly via the
unit.
1. Before starting the pairing process. Press the Power on the units.
Turn Function (4) on unit to BT Bluetooth.
2. Meanwhile, switch the button (10) to BT. Unit will ash
BT (Bluetooth).
3. Activate Bluetooth function in mobile phone. Unit will start to pair &
search for code “PR200 /GPO” automatically.
4. When successfully paired, the display will stop ashing.
5. If the PR200 /GPO is not displayed in Bluetooth device, press
button (19) on unit or by Remote Control, button (1) to
re-search for the name.
6. To exit Bluetooth function, turn the unit off
7. Auto-off
The transmitter / receiver will automatically switch off if no devices can
be connected within __ minutes.
The BT Pair code “PR200 “ is for 1 user only. The user should
disconnect the Bluetooth Pair from mobile phone before the other can
get successful pair.
GPO PR200_user_Manual EU - Oct 2017.indd 17 26/10/2017 10:07
17
OPERATING THE CD/ USB PLAYER
1. Turn the Power (2) On by remote control.
2. Press the Function (4) to CD by remote control.
3. Insert a compact disc to the CD deck (13) or USB to USB Playback
slot (8) on Amplier ; “CD” or “USB” will be displayed.
PLAY/PAUSE button
• When music is stopped, press the button to play the music.
• When music is playing, press the button to pause.
• When music is paused, press the button to resume play.
STOP button
• When music is playing or paused, press the button to stop.
• When in programming tracks, press the button to exit the mode.
SKIP UP /NEXT button)
• When music is stopped, press the button to select the track you want
to play (and go to the rst track if currently on the last track).
• When music is playing, press the button to skip to the next track (and
go to the rst track if currently playing the last track).
• Press the button and hold for 2 seconds to fast-forward.
• When playing programmed tracks, press the button to skip to the next
programmed track (and go to the rst track if currently playing the last
track).
18
GPO PR200_user_Manual EU - Oct 2017.indd 18 26/10/2017 10:07
SKIP DOWN /BACK button
• When music is stopped, press the button to select the track you want
to play (and go to the last track if currently on the rst track).
• When music is playing, press the button to skip to the previous track
(and go to the last track if currently playing the rst track).
• Press the button and hold for 2 seconds to rewind.
• When playing programmed tracks, press the button to skip to the
previous programmed track (and go to the last track if currently
playing the rst track).
KEY NUMBER ON REMOTE CONTROL
Press Key number 1 to 10 to select song number..
Press Key number – 10 or +10. The song number is multiplied by 10.
Once the number is selected, music will play automatically.
REPEAT Play in CD or USB
• Press Mode button ( 3) by Remote Control to switch between three
modes: Repeat One, Repeat Folder (FLD) or Repeat All ,
• Repeat One mode, the player repeats the current CD track.
• Repeat Folder mode, the player repeats the whole folder.
• Repeat All mode, the player repeats all tracks on the CD; when it
reaches end of the last track, it will return to the rst track.
• Press Mode (3) again & select OFF to turn off the function
GPO PR200_user_Manual EU - Oct 2017.indd 19 26/10/2017 10:07
19
RANDOM Play in CD or USB
• Press Random [9] by Remote Control Unit
• Press SKIP UP / DOWN or . The tracks will be played randomly
• To turn off Random Play, press RANDOM again
FOLDER + / -
In USB mode, press FOLDER - / + (17, 18) by Remote Control. The
album no. will change
Press SKIP UP / DOWN or to select the track no.
When the desired track is being selected, music will play automatically.
MEMORIZING / PROGRAMMING
CD, CD/ MP3 & USB PLAY
User can only enter programs in STOP mode. Press the STOP (11)
by remote control and then follow the instructions below.
1. Press the Function (4) to CD / CD/ MP3 & USB by remote
control
2. Press the Memory button (15) by remote control. LCD display
“PR01”.
“001” (track number on CD or USB), “Memory” function) and “01”
(Memorized number).
The memorized number ashes.
3. Press the SKIP buttons to choose the track number you
wish to memorize.
20
GPO PR200_user_Manual EU - Oct 2017.indd 20 26/10/2017 10:07
4. Press the Memory button (15) to save & conrm. The unit goes to
the next memorized number you wish to store. Repeat the steps to
save other track numbers.
5. The unit can store maximum 30 CD memories and 99 CD/MP3,
USB memories. After it has stored to the maximum of memories,
no further entry is possible.
6. If you press the STOP button while programming the unit, the
unit clears the memorized content and returns to STOP mode.
7. If you press the PLAY/PAUSE button when the unit has been
memorized, “Memory” is displayed and the unit starts playing the
memorized tracks.
8. If you press the SKIP or buttons when playing memorized
tracks, the unit skips to the previous or next memorized track.
9. If you press the STOP button when playing memorized tracks,
the unit stops playing but memorized track selection is kept. Press
the STOP button again to clear the memorized content and
return to STOP mode.
Remark: Please note that the unit can only read FAT32 format USB
drives with less than 32GB.
RECORDING AND STORING FROM
GPO PR200_user_Manual EU - Oct 2017.indd 21 26/10/2017 10:07
TURNTABLE TO USB
User can record favourite vinyl songs in MP3 format and store them on
a memory device via the USB port (8)
- On Main Unit (Amplier), set the Function button (4) to PHONO
mode by remote control.
21
- On Main Unit (Amplier), insert the USB ash drive into the USB
port (8). Press the RECORD button (7) by remote control to start
synchronized recording. Display will show “USB” ashing.
- On Main Unit (Amplier), Press STOP (11) to stop encoding by
remote control.
RECORDING AND STORING FROM CD TO USB
User can record favourite CD songs in MP3 format and store them on
a memory device via the USB port (8).
1. Set the Function (4) to CD mode.
2. Press the SKIP or to select the song or track, then press
the PLAY/PAUSE button (9).
3. Press the RECORD ( 7) to start sync encoding and the display will
show ”USB” ashing.
4. Press Skip or to select recording into USB or Press
RECORD to conrm.
5. Press STOP to stop encoding.
6. Remark: CD recording must be synchronised. Press the STOP
button (11) to conrm.
22
GPO PR200_user_Manual EU - Oct 2017.indd 22 26/10/2017 10:07
Note : Some CD’s are copyrighted which means that you may not be
able to encode from them. Always make sure you are allowed to copy
from the format you are working with and that you are not infringing
any copyright laws.
TS Function (Track / File separation )
- On main unit, press TS button (7) (Track separation) by remote
control to split next song.
- When recording from vinyl to USB, press TS button (7) once at the
end of song. It will create a new le to another song for record.
- If the USB capacity more than 4GB, the record time may delay about
6 – 10 seconds for 2nd song.
- To prevent incomplete song recording, lift up Tone Arm while the USB
drive is under checking. Lift down the Tone Arm while USB is ready to
record.
Delete le/ folder from USB
The le / folder can be deleted from USB directly.
1. Go to USB model. Press the SKIP or to select the song or
track you want to delete
2. Press Delete on remote control. The USB le will be deleted
GPO PR200_user_Manual EU - Oct 2017.indd 23 26/10/2017 10:07
23
AUX-IN 1 (on real panel)
- User can connect outside sources like TV, CD, cassette & etc to
hi- system/Speakers via turntable , use a audio 3.5 mm jack cable
(not provided) with separate white and red plugs for the left and right
stereo channels
- To connect one end of the audio socket to the other side of Aux-In 1
jack (R, L) on real panel of turntable.
- Set the Function button to (Aux in 1 ) Audio In by remote control.
- Operate user’s TV/ CD/ Cassette as directed by your manufacturers.
AUDIO IN Via MP3 PLAYER & SMARTPHONE
1. Press the Power button to turn on unit.
2. Set the Function button to (Aux in) Audio In by remote control.
3. Using 3.5mm jack lead , (not provided ) to connect one end to the
headphone socket on MP3 player / smartphone and the other side
to the Aux-In jack (7) on the main unit .
4. Operate your MP3 player / smartphone as directed by your
manufacturer.
BASS BOOST
On main unit, turn left and right the BASS button (11) to enjoy a more
powerful Bass sound.
24
GPO PR200_user_Manual EU - Oct 2017.indd 24 26/10/2017 10:07
TREBLE
On main unit, adjust the TREBLE (12) to achieve the ideal
performance.
SPEAKER BALANCE
On main unit, turn Speaker Balance (14) left and right to get balance of
speaker volume on unit. VU meter will show user the sound levels.
EQ (EQUALIZER)
Press the EQ (19) by remote control Unit to select the music format in
Rock / POP/ Classic / JAZZ
Press EQ again to turn off the function.
MUTE
Press MUTE (16) on by remote control, there will be no sound.
Press MUTE again to turn the function off
GPO PR200_user_Manual EU - Oct 2017.indd 25 26/10/2017 10:07
HEADPHONE
On main unit, you can plug stereo headphones (not included) equipped
with a 3.5 mm jack and impedance of 8 ohms or greater into the
unit’s headphone jack (6). When using headphones, the speakers are
automatically disconnected.
25
WARNING:
USING HEADPHONES IMPAIRMENT
• Set a low volume on the playback device before connecting the
headphones to the sound source.
• Avoid excessive volume, particularly over extended periods or
frequent use. Excessive volume can result in permanent hearing
impairment.
Note: When there is no sound output for about 60 minutes in CD, USB,
Bluetooth or AUX mode, the unit will automatically switch to standby
mode to save energy. It can be turned on again by using the AUDIO IN
/ CD/ USB/ TUNER/Bluetooth Function button.
SPECIFICATIONS
Power supply: AC 100 ~ 240V ~ 60Hz
Power consumption: 25 WATTS
FM Radio frequency coverage: FM 87.5 – 108 MHz
26
GPO PR200_user_Manual EU - Oct 2017.indd 26 26/10/2017 10:07
GPO PR200_user_Manual EU - Oct 2017.indd 27 26/10/2017 10:07
27
GPO PR200_user_Manual EU - Oct 2017.indd 28 26/10/2017 10:07
GERMAN
GPO PR200_user_Manual EU - Oct 2017.indd 29 26/10/2017 10:07
2929
Wichtige Sicherheitshinweise
• Lesen Sie diese Anweisungen.
• Bewahren Sie diese Anweisungen auf.
• Beachten Sie alle Warnungen.
• Befolgen Sie alle Anweisungen.
• Überlassen Sie alle Wartungsarbeiten an qualiziertem
Fachpersonal.
• Stellen Sie das Gerät nicht Tropf- oder Spritzwasser ausgesetzt
und stellen Sie sicher, dass keine mit Flüssigkeiten gefüllten
Gegenstände - wie beispielsweise Vasen, auf sie gestellt sind.
• Wärme : Das Gerät darf nicht in der Nähe von Wärmequellen
wie Radiatoren, Heizungen, Öfen oder anderen Geräten
(einschließlich Verstärkern), die Wärme erzeugen abgestellt sein.
• Geräte der Klasse I müssen an der Steckdose mit einer
schützenden-Verbindung angeschlossen werden.
• Der Netzstecker verbindet das Gerät und während der
Anwendung soll bedienbar bleiben.
• Um das Gerät von der Stromversorgung zu trennen, soll den
Stecker vollständig von der Steckdose getrennt werden . Der
Netzstecker sollte nicht behindert werden und sollten leicht
während der Benutzung zugänglich sein.
• Wenn die POWER-Diode leuchtet, ist das Gerät an die
Stromversorgung angeschlossen. Wenn das Licht aus ist, gibt Es
an, dass das Gerät vollständig vom Netz getrennt ist.
30
GPO PR200_user_Manual EU - Oct 2017.indd 30 26/10/2017 10:07
Loading...