Gpo PR100 User Manual

PR100

USER MANUAL

V1 | OCT 2017

GPO PR100_user_Manual EU - Oct 2017.indd 1				26/10/2017 10:06

2

GPO PR100_user_Manual EU - Oct 2017.indd 2				26/10/2017 10:06

CONTENT

English	5
German	19
French	33
Dutch	47
Spanish	61

3

GPO PR100_user_Manual EU - Oct 2017.indd 3				26/10/2017 10:06

4

GPO PR100_user_Manual EU - Oct 2017.indd 4				26/10/2017 10:06

ENGLISH

5

GPO PR100_user_Manual EU - Oct 2017.indd 5				26/10/2017 10:06

Important safety instructions

•Read these instructions.

•Keep these instructions.

•Heed all warnings.

•Follow all instructions.

•Refer all servicing to qualified service personnel.

•Do not expose the unit to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on it.

•Heat – The appliance should be put away from heat sources such as radiators, heat, registers, stoves or other appliances (including amplifiers) that produce heat.

•Class I appliances must be connected to the mains socket outlet with a protective-earth connection.

•The mains plug connects the device and should remain operable during use.

•To disconnect the unit from the mains, the plug should be fully disconnected from the mains socket outlet. The mains plug should not be obstructed and should be easily accessible during use.

•When a power indicator light is on, it indicates the unit is connected to the mains supply. When the light is off, it indicates the unit is fully disconnected from the mains supply.

6

GPO PR100_user_Manual EU - Oct 2017.indd 6				26/10/2017 10:06

•Damage Requiring Service: The appliance should be serviced by qualified service personnel when:

-The power supply cord or the plug has been damaged

-Objects has been exposed to rain.

-The appliance does not appear to operate normally or exhibits a marked change in performance.

-The appliance has been dropped, or the enclosure damaged.

What’s in the box

Check and identify the contents of your package:

•Turntable PR100

•45 RMP Adaptor (packed in plastic bag) 1 pc

•Instruction Manual

•RCA cable (to connect with main unit 1 pc

•AC adaptor (100V ~ 240V, 50/60 HZ )

for turntable only to connect with main unit 1 pc

7

GPO PR100_user_Manual EU - Oct 2017.indd 7				26/10/2017 10:06

Turntable Function keys

1.	Hinge & Transparent Cover	10.	Start / Stop
2.	Turntable	11. Pitch adjustment
3.	Counterweight	12.	Power indicator
4.	Counterweight indicator	13.	Bluetooth On / Standby
5.	Anti-skating Control	14.	Stylus Cartridge
6.	Cue lever (Tone arm lift lever)	15.	Line Out jacks
7.	Tone arm holder	16.	Phono EQ /Thru on
8.	Speed Selector (33 / 45 rpm	17. AC adaptor jack (DC 12V)
9. Tone Arm		18.Power on

45 RPM adaptor is packed with manual in separate plastic bag

Put the 45 RPM adapter over the central spindle when playing 45-RPM record

8

GPO PR100_user_Manual EU - Oct 2017.indd 8				26/10/2017 10:06

1 2

3

4

5

6

7

8

9

10

11

12

13

14

15161718

9

GPO PR100_user_Manual EU - Oct 2017.indd 9				26/10/2017 10:06

Connection

•Use the provided RCA cable to connect the phono line out jack (15) & match Red (R) & White (L) with main unit (amplifier) line in jack.

•After finishing all connections, connect the supplied AC adaptor to the DC 12V jack (17) & plug in the power supply

Precautions

-Be sure all connections have been done before plug in the unit to power supply.

-Please read & follow the instruction carefully before connecting

-Be sure to connect the AC adaptor at the correct voltage (AC 100V

~ 240 Hz, 50/60 Hz), Only use the own package provided.

-Wrong voltage could cause fire, short circuit or electric shock.

10

GPO PR100_user_Manual EU - Oct 2017.indd 10				26/10/2017 10:06

SPEAKER

Connect a pair of speakers with the unit via the SPEAKER output R, L jack (24) in rear panel of MAIN UNIT (Amplifier)

11

GPO PR100_user_Manual EU - Oct 2017.indd 11				26/10/2017 10:06

TURNTABLE

INSTALL THE TURNTABLE

1.Put the turntable on a flat surface

2.Put the turntable with the center axis in straight and install the turntable onto the plate base.

3.Pull the rubber band around the back plate through the round opening with a finger wrap and loop it around the motor pulley

-Do not let the rubber twisted

-Turn left and right the turntable several times to check the rubber runs smoothly and well installed.

4. Put the rubber mat onto the turntable base.

PREPARING THE TURNTABLE PLAYER

To balance the tone arm and adjust the stylus pressure

1.Open the turntable cover

2.Set the anti-skating dial to zero

3Release the tone arm holder

4Lift the tone arm lift lever and turn the tone arm to the left gently.

5Turn & adjust the counterweight to make the tone arm level.

Remove the stylus cap before adjustment & be careful not to let the stylus touch the unit

6Return the tone arm to the original position and lock it.

7Turn & adjust the stylus pressure ring to let the center line align with 0. (Do not let the counterweight turn)

12

GPO PR100_user_Manual EU - Oct 2017.indd 12				26/10/2017 10:06

8 Turn & adjust the counterweight to let ring scale match the stylus pressure of the cartridge. The stylus pressure of cartridge is 2.0 g. then, turn the counterweight scale to 2.0

9.Adjust the anti-skating dial: set it at 2 and adjust it while record is playing to the position where both left and right volumes are balanced.

POWER SOURCE

This unit is designed to operate on a normal AC 100V ~ 240V, 50/60

Hz household power supply. Do not attempt to operate the system using other power sources. This may result in damage to the unit and void your warranty.

13

GPO PR100_user_Manual EU - Oct 2017.indd 13				26/10/2017 10:06

LISTENING TO RECORDS

1.Make sure to put the unit on flat surface.

2.Power on / Standby mode on real panel of turntable. Blue light flashes on bottom right corner of turntable.

3.Turn on the Power of Main unit (Amplifier) and select the function to

PHONO

4. Place a record on turntable over the central spindle	(Place the 45
RPM adapter over the central spindle when playing	45-RPM record)

5.Set the Speed Selector to 33 or 45 RPM according to the record.

6.Turn to START(10). The turntable plate will move & swivel over the record automatically.

7.Release the tone arm holder & remove the protective cap form the stylus

8.Lift the tone arm with Tone arm lift lever (6).

9.Move the tone arm to the beginning of the record, or to the start of a particular track.

10.Gently lower the tone arm onto the record with the Tone arm lift lever (6) to start playing.

11.When the record finishes the tone arm will automatically lift from the record and return to the tone arm holder To stop manually, lift the tone arm from the Tone arm lift lever (6) and return it to the tone arm holder. Lock the holder.

12.Turn to STOP (10) when playback is finished.

13.Replace the protective cap on the stylus when not in use.

14.Slightly close the turntable cover.

14

GPO PR100_user_Manual EU - Oct 2017.indd 14				26/10/2017 10:06

START / STOP selector (Auto Return Arm function)

Turn to START. The turntable will move & swivel over the record automatically. There is auto return arm function after the record finishes. Once the tone arm returns, the turntable will stop.

BLUETOOTH PAIRING : TRANSMITTER

As Bluetooth transmitter, the main unit can be connected with main unit or other BT receivers

Before pairing, please switch on the Bluetooth receiver and make it enter the pairing mode

-Turn on button 13 BT Pair for 2 seconds to transmitting function on turntable.

-Power indictor will flash when The transmitter enters pairing mode;

-The transmitter will automatically search for Bluetooth receiver and finish connection;

-Main unit / Bluetooth receiver will show the pairing name PR100

-To exit Bluetooth function, press again.

15

GPO PR100_user_Manual EU - Oct 2017.indd 15				26/10/2017 10:06

PHONO EQ / THRU ON

EQ ON

Turn on EQ /THRU on the rear panel when amplifier has no phono inputs. When the turntable PR-100 has been using the phono inputs, set the function off.

THRU

The cartridge signal is output directly through the audio output jacks

(L/R). Turn to THRU ON when connecting to equipment that has phono inputs.

PITCH ADJUSTMENT

The PITCH ADJUST allows you to tune the playing speed of the record once the correct speed (33/45 RPM) is chosen. Turn the Pitch Adjust

Control (11) to slightly increase or decrease the speed of the turntable if necessary.

16

GPO PR100_user_Manual EU - Oct 2017.indd 16				26/10/2017 10:06

CARE FOR STYLUS

-Record stylus is precious & fragile, please handle with care and avoid bending or damaging its tip. Once it is damaged, it may be unable to follow the audio groove precisely & may jump the groove. Such leads to malfunction. Record would be damaged.

-Once the stylus is dirty, use a specified stylus cleanser or similar product to clean it.

-Do not rub or wipe the stylus / tip hard with other chemicals. Stylus will be damaged.

SPECIFICATIONS

Power supply: AC 100 ~ 240V 50/60Hz

17

GPO PR100_user_Manual EU - Oct 2017.indd 17				26/10/2017 10:06

GPO PR100_user_Manual EU - Oct 2017.indd 18

26/10/2017 10:06

GERMAN

19

GPO PR100_user_Manual EU - Oct 2017.indd 19				26/10/2017 10:06

Wichtige Sicherheitshinweise

•Lesen Sie diese Anweisungen.

•Bewahren Sie diese Anweisungen auf.

•Beachten Sie alle Warnungen.

•Befolgen Sie alle Anweisungen.

•Überlassen Sie alle Wartungsarbeiten an qualifiziertem

Fachpersonal.

•Stellen Sie das Gerät nicht Tropfoder Spritzwasser ausgesetzt und stellen Sie sicher, dass keine mit Flüssigkeiten gefüllten

Gegenstände - wie beispielsweise Vasen, auf sie gestellt sind.

•Wärme : Das Gerät darf nicht in der Nähe von Wärmequellen wie Radiatoren, Heizungen, Öfen oder anderen Geräten

(einschließlich Verstärkern), die Wärme erzeugen abgestellt sein.

•Geräte der Klasse I müssen an der Steckdose mit einer schützenden-Verbindung angeschlossen werden.

•Der Netzstecker verbindet das Gerät und während der

Anwendung soll bedienbar bleiben.

•Um das Gerät von der Stromversorgung zu trennen, soll den

Stecker vollständig von der Steckdose getrennt werden . Der

Netzstecker sollte nicht behindert werden und sollten leicht während der Benutzung zugänglich sein.

•Wenn die POWER-Diode leuchtet, ist das Gerät an die

Stromversorgung angeschlossen. Wenn das Licht aus ist, gibt

Es an, dass das Gerät vollständig vom Netz getrennt ist.

20

GPO PR100_user_Manual EU - Oct 2017.indd 20				26/10/2017 10:06

•Beschädigungen, bei denen Wartung erforderlich ist: Das Gerät sollte von qualifiziertem Wartungspersonal gewartet werden, wenn:

-Das Netzkabel oder der Netzstecker beschädigt wurde.

-Objekte ausgesetzt worden an regnen.

-Das Gerät nicht ordentlich funktioniert oder weist eine deutliche Änderung in der Leistung.

-Das Gerät heruntergefallen ist oder das Gehäuse beschädigt.

Was ist in der Box

Überprüfen Sie den Inhalt Ihres Pakets:

• Plattenspieler PR 100

• 45 RMP Adapter (in Plastikbeutel verpackt) 1 pc

•Bedienungsanleitung

•RCA -Kabel (mit anzuschließen) 1 pc

•Netzteil (100V - 240V, 50/60 Hz) Für Plattenspieler, nur mit dem

Gerät verbinden 1 pc

21

GPO PR100_user_Manual EU - Oct 2017.indd 21				26/10/2017 10:06

Plattenspieler Funktionstasten

1.	Scharnierund transparente	10.	Start/Stop
	Abdeckung	11. Pitch Einstellung
2.	Drehtisch	12.	Betriebsanzeige
3.	Gegengewicht	13.	Bluetooth Ein/Standby
4.	Gegengewicht Anzeige	14.	Stylus Patrone
5.	Anti-skating- Regler	15.	Line Out-Buchsen
6.	Cue-Hebel	16.	Phono EQ/Thru On
	(Tonarm Hebel anheben)	17. AC Adapter Jack (DC 12 V).
7.	Tonarm Halter	18. macht auf

8.Geschwindigkeitsregler

(33 / 45 U/min.

9.Tonarm

45 U/min Adapter ist mit gebraucheranleitung in separaten Plastikbeutel verpackt

Die 45 U/min Adapter über der Spindel legen beim Spielen 45 U/min )

22

GPO PR100_user_Manual EU - Oct 2017.indd 22				26/10/2017 10:06

1 2

3

4

5

6

7

8

9

10

11

12

13

14

15161718

23

GPO PR100_user_Manual EU - Oct 2017.indd 23				26/10/2017 10:06