Gossen Mavo-Spot 2 USB User Manual

Please pay attention that during the measure-

ment only one of the following attachements has
to be fixed on the lens:

the protective filter (from 100 cm) or
the close-up lens 1 (51 cm…100 cm) M496G or
the close-up lens 2 (34 cm…50 cm) M497G or
the probe for contact measurement M511G

During the measuring at bright ambient light we
recommend to use the stray-light baffle M513G.

For measuring the illuminance (function Corr 2)
the meter is calibrated on the reflectance standard
M512G from GOSSEN. Other reflectance
standards will lead to incorrect measuring results.

Printed in Germany – Subject to change without notice

GOSSEN Foto- und Lichtmesstechnik GmbH
Lina-Ammon-Str.22 I D-90471 Nürnberg I Germany

Phone: [phone]
Fax: [phone]
E-Mail: [e-mail]

www.gossen-photo.de

GB

MAVO-SPOT 2

Condensed Instructions

Focusing ring

Lens

USB

Battery
compartment

Tripod socket

Measuring
key

Function
key

Lumi-Corr-Mem

USB

15361 – 2/04.13

Eyepiece

Control panel

Measuring

Function

A/B-%A-A-B

key

key

Default Settings – DIP Switches

in Battery Compartment

Expert Mode

cd/m²

Stand.

Linear

Compact Mode

(Default Settings)

fL

Comp.

Page

Select Functions

in Expert Mode

Measuring/Calculating

- Ratio

- Percentage Deviation

- Difference

Switching On (Any Key)

Measuring

Saving Values

Measuring with

- Correction Factor 1

- Correction Factor 2
3,142 (Lux)

Saving

- Luminance

- Illuminance