Gorman‐Rupp Pumps T4A60S‐4LE2T FT4 Specification
Specification Data
Diesel Engine Driven
Sec. 45
Self Priming Centrifugal Pump
w/Autostart
Model T4A60S‐4LE2T FT4
PAGE 1247
NOVEMBER 2020
VARIOUS PATENTS APPLY
Total Head
P.S.I. Feet
Capacity Of Pump In U.S. Gallons
Per Minute (GPM) At Continuous
Performance
Size 4” x 4”
54.6 126 300 300 300 300 300
43.4 100 373 495 622 680 680
34.7 80 380 505 632 720 792
26.0 60 388 512 642 725 805
17.3 40 395 520 650 730 815
8.7 20 405 530 660 740 825
Suction Lift 25' 20' 15' 10' 5'
PUMP SPECIFICATIONS
Size: 4” x 4” (101 mm x 101 mm) NPT ‐ Female.
Casing: Gray Iron 30.
Maximum Operating Pressure 98 psi (676 kPa).*
Semi‐Open Type, Two Vane Impeller: Ductile Iron 65‐45‐12.
Handles 3” (76,2 mm) Diameter Spherical Solids.
Impeller Shaft: Stainless Steel 17‐4 PH.
Replaceable Wear Plate: Carbon Steel ASTM A36.
Removable Adjustable Cover Plate: Gray Iron 30.
Removable Inspection Cover Plate: Gray Iron 30; 12 lbs. (5,4 kg.).
Seal Plate: Gray Iron 30.
Seal: Cartridge Type, Mechanical, Oil‐Lubricated, Double Floating, Self‐
Aligning. Silicon Carbide Rotating and Stationary Faces. Stainless Steel
316 Stationary Seat. Fluorocarbon Elastomers (DuPont Viton
Equivalent). Stainless Steel 18‐8 Cage and Spring. Maximum
Temperature of Liquid Pumped 160F (71C).*
Flap Valve: Neoprene
Shaft Sleeve: Alloy Steel 4130.
Intermediate: Gray Iron 30.
Radial Bearing: Open Single Ball.
Thrust Bearing: Open Double Ball.
Bearing Lubrication: SAE 30 Non‐Detergent Oil.
Flange: Gray Iron 30.
Gaskets: Compressed Synthetic Fibers and PTFE.
O‐Rings: Buna‐N, PTFE, Fluorocarbon Elastomers (DuPont Viton or
Equivalent).
Hardware: Standard Plated Steel.
Brass Pressure Relief Valve.
Bearing and Seal Cavity Oil Level Sight Gauges.
*Consult Factory for Applications Exceeding Maximum Pressure and/or
Temperature Indicated.
Standard Equipment: Hoisting Bail. 90 Discharge Elbow. Strainer.
Combination Skid Base w/Fuel Tank. Full Feature Control Panel
Ball Type Float Switch.**
**50 Ft. (15 m) Standard Length; Dual Switches and Alternate Cable
Lengths Available From the Factory.
Optional Equipment: Battery. G‐R Hard Iron Impeller and Seal Plate.
Hardened Steel Wear Plate.
Axle Pneumatic‐Tired Wheel Kit
Electric Brakes. Tandem Axle Over‐the‐Road Trailer
Requirements) Liquid Level Transducer.
w
/Steel Reinforcement.
High Speed (55 MPH/89 KM/H) Single
w
/wo DOT‐Approved Lights and
(Meets DOT
or
Single
Do not use in explosive atmosphere or for pump
ing volatile flammable liquids.
ENGINE SPECIFICATIONS
Model: Isuzu 4LE2T.
EPA Tier: Final Tier 4.
Type: Four Cylinder, Four Cycle, Turbocharged,
Charge Air Cooled, Liquid Cooled Diesel Engine.
Displacement: 134 Cu. In. (2,2 Liters).
Lubrication: Forced Circulation.
Air Cleaner: Dry Type.
Fuel Tank: 70 U.S. Gals. (265 Liters).
Full Load Operating Time: 36.6 Hrs.
Starter: 12V Electric.
Standard Features: Muffler
DOC Exhaust After‐Treatment System.
Engine Control Features: Padlockable Box with
Throttle Control, Tachometer, Coolant Temperature,
Oil Pressure, Voltage and Overstart Indicators/Shut
downs. Manual/Stop/Auto Keyswitch. Audible
Startup Warning Delay. Fuel Level Display/Alarm/
Shutdown.
w
/Weather Cap.
ISUZU PUBLISHED PERFORMANCE:
Maximum Gross Continuous BHP
48 (35.8 kW) @ 2400 RPM
GORMAN‐RUPP PUMPS
www.grpumps.com
Specifications Subject to Change Without Notice Printed in U.S.A.
Copyright Gorman‐Rupp Pumps 2020
Specification Data
SECTION 45, PAGE 1247
APPROXIMATE
DIMENSIONS and WEIGHTS
SKID BASE 2‐WHEEL
NET WEIGHT: 2560 LBS. (1161 KG.) 3030 LBS. (1374 KG.)
SHIPPING WEIGHT: 2830 LBS. (1284 KG.) 3030 LBS. (1374 KG.)
EXPORT CRATE SIZE: 261 CU. FT. (7,4 CU. M.)
DISCHARGE:
4.00−8 NPT
7.38
[ 187,3 ]
14.75
[ 374,6 ]
29.50
[ 749,3 ]
44.25
[ 1124,0 ]
51.00
[ 1295,4 ]
2.75
[ 69,8 ]
2.75
[ 69,8 ]
SUCTION:
4.00−8 NPT
75.50
[ 1917,7 ]
5.50
[ 139,7 ]
*
45.14
[ 1146,5 ]
APPROX
DIMENSIONS:
INCHES
[MILLIMETERS]
18.00/[457,2] RECOMMENDED FOR
REMOVAL OF BACK COVER PLATE
10.00/[254,0] REQUIRED FOR
REMOVAL OF BACK COVER PLATE
8.93
[ 226,8 ]
34.74
[ 882,5 ]
*
6.95
[ 176,5 ]
23.75
[ 603,2 ]
3.79
[ 96,3 ]
POWERED BY: ISUZU 2.2L 4LE2T DIESEL ENGINE
2.75
[ 69,8 ]
.69/[17,5] DIA
7 HOLES EACH SIDE
104.00
[ 2641,6 ]
95.50
[ 2425,7 ]
14.00
[ 355,7 ]
.69/[17,5] DIA
4 HOLES
.76
[ 19,2 ]
GORMAN‐RUPP PUMPS
www.grpumps.com
Specifications Subject to Change Without Notice Printed in U.S.A.
Copyright Gorman‐Rupp Pumps 2020
Loading...