Gorenje W8544PR, W8544PB, W8544PA, W8544LO, W8544P User Manual

...

DETAILED INSTRUCTIONS

HOW TO USE YOUR WASHING MACHINE

www.gorenje.com

We thank you for your trust

and the purchase of our washing machine. Your new washing machine complies with the requirements of modern laundry care. Your laundry will be impeccably white even at low temperatures, owing to special washing programs like Ultra White. SensoCare technology allows simple control of the washing machine. Your washing machine is highly economical when it comes to use of power, water, and detergent. The washing machine is intended exclusively for use in households, for washing the laundry that is indicated as machine washable.

Table of contents

4 WASHING MACHINE

5 Technical information 6 Front panel

8 SAFETY PRECAUTIONS

10 INSTALLATION AND CONNECTION

10 Removal of transport brackets 11 Selecting the room 11 Installation 13 Water inlet connection 14 Aqua-stop 14 Total aqua - stop 15 Water outlet connection 16 Connect the appliance to the mains supply 17 Moving and transport 17 Subsequent transport

18 BEFORE THE USE

19 WASHING STEPS (1 - 7)

19 1. Step: Check the tags on your laundry 20 2. Step: Preparing the washing process 22 3. Step: Choosing a programme 25 4. Step: Choosing the settings 27 5. Step: Selecting additional functions 29 6. Step: Program start 29 7. Step: End of washing program

INTRODUCTION

PREPARING THE APPLIANCE FOR THE FIRST USE

STEPS OF THE WASHING PROCESS

30 LEANING AND MAINTENANCE

30 Cleaning the detergent dispenser 31 Cleaning the dispenser housing, inlet hose screen and door rubber gasket 32 Cleaning the filter 33 Cleaning the washing machine

34 INERRUPTING AND CHANCHING THE PROGRAM

35 What to do ...? 36 Troubleshooting table

38 RECOMMENDATIONS FOR WASHING AND ECONOMIC USE YOUR WASHING MACHINE

40 Grandma's advice for natural stain removal

42 DISPOSAL 43 TYPICAL CONSUMPTION TABLE

CLEANING & MAINTENANCE OF THE APPLIANCE

TROUBLESHOOTING

OTHER

351677

WASHING MACHINE

(WASHING MACHINE DESCRIPTION)

FRONT

1 Front panel 2 Dispenser 3 Door 4 Filter

BACK

1 Water inlet pipe 2 Power cord 3 Water discharge pipe 4 Adjustable feet

351677

TECHNICAL INFORMATION

(DEPENDING ON THE MODEL)

The rating plate with the basic information on the washing machine is located under the washing machine door.

Maximum load See rating plate See rating plate (SLIM) Width Height Depth Depth with door open

Washing weight

Rated Voltage Nominal power Connection Water pressure Current Frequency

600 mm 600 mm

850 mm 850 mm

600 mm 440 mm

108 cm 92 cm x kg

(depending on the model) See rating plate See rating plate

See rating plate See rating plate

x kg (depending on the model)

Rating plate

TYPE: PS10/XXX Art.No.: XXXXXX AC 220-240V 50/60 Hz 10A Pmax.: 2400W 2000W XXX/min 0,05-0,8 MPa

IPX4

MODEL: XXXXXX Ser.No.: XXXXXX

MADE IN SLOVENIA

351677

FRONT PANEL

Washing machine ON/

OFF and program

SELECTOR DIAL

a , b, c WASHING

STYLE keys

(SensoCare)

2a ECOcare 2b ALERGYcare 2c TIMEcare

WASHING

TEMPERATURE key

3a SIGNAL LIGHTS for

indicating the WASHING TEMPERATURE/ for COLD WASH

351677

SPINNING RPM / PUMP

/ STOP PUMP key

4a SIGNAL LIGHTS for

displaying the SPINNING RPM/PUMP OPERATION/ PUMP STOP

START DELAY key

5a START DELAY display, or

time remaining until the end of the washing cycle

5b CHILD LOCK signal light

a , b, c ADDITIONAL

FUNCTION keys 6a Prewash 6b Extra water 6c SterilTub

START|PAUSE

START/PAUSE key

Use this key to start or

stop the program.

When the machine is turned on, the signal light on the key starts to flash; when the program is started, it is lit continuously.

351677

SAFETY PRECAUTIONS

Please, do not use the washing machine

without reading and understanding these instructions or use first.

Be sure to remove transport brackets prior first use of the appliance. Attempted operation of the blocked machine may result in irreparable damage which is not covered by the manufacturer’s warranty!

When connecting your washing machine to water supply, be sure to use the supplied

water inlet hose and sealing gaskets.

Failure to observe the instructions for use or inappropriate use of the washing

machine may result in damage to the laundry or machine, or injury to the user. Keep the instructions for use handy, near the washing machine.

Do not install the machine in a room where temperature can drop below 0°C. Parts of

the machine may be damaged if the water inside them freezes.

Install the washing machine in a perfectly horizontal position, on solid flat (concrete) floor.

Follow the instructions for correct installation and water and mains connections (see chapter "Installation and connections").

Door may not be open during the washing cycle.

We recommend running the self-cleaning program before the first wash in order to

remove any impurities from the washing machine drum. (See chapter on” Selecting additional functions”.

Use only detergents and softeners for machine wash. Manufacturer may not

assume responsibility for any damage and eventual discolouring of gaskets and plastic components as a consequence of incorrect use of bleach and/or colouring agents.

For removal of lime residues use such agents with added anti-corrosion agents. Follow the manufacturer’s instructions. Finish the lime removal by multiple rinsing to remove completely eventual acid residues (e.g. vinegar etc.).

Never use detergents containing solvents,

since there is a danger of creating toxic gasses which may damage the machine and result in ignition or explosion.

This product does not release silver ions during the washing cycle.

Upon completion of the washing cycle, close the water faucet and unplug the mains cord.

Never immerse the end of the drain hose into the draining water.

Prior starting the washing cycle lock the door by pressing them at the designed spot.

351677

Before transporting the machine after it has been used, block the drum by inserting at least one transport blocking rod. Disconnect the appliance from the mains power before inserting the rod!

Rating plate with basic information is located above the opening of the machine.

Leave any repairs and similar tasks on the washing machine to an expert.

Unprofessional repair may result in an accident or major malfunction.

The warranty shall not apply to consumables, minor discoloration or deviations of colour, increased noise level as a consequence of appliance age, which does not affect appliance functionality, and aesthetical deficiencies which do not affect appliance functionality or safety.

The appliance is intended exclusively for use in households. If the appliance is

used for professional purposes, for profit, or for purposes beyond regular use in a household, or if appliance is used by a person who is not a consumer, the warranty period equals the shortest warranty period possible as stipulated by the relevant legislation.

THE APPLIANCE IS MANUFACTURED IN COMPLIANCE WITH ALL RELEVANT SAFETY STANDARDS.

THIS APPLIANCE IS NOT INTENDED FOR USE BY PERSONS (INCLUDING CHILDREN) WITH REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES, OR LACK OF EXPIERENCE AND KNOWLEDGE, UNLESS THEY HAVE BEEN GIVEN SUPERVISION OR INSTRUCTION CONCERNING USE OF THE APPLIANCE BY A PERSON RESPONSIBLE FOR THEIR SAFETY. CHILDREN SHOULD BE SUPERVISED TO ENSURE THAT THEY DO NOT PLAY WITH THE APPLIANCE. CLEANING AND USER MAINTENANCE SHALL NOT BE MADE BY CHILDREN WITHOUT SUPERVISION.

BEFORE CONNECTING THE WASHING MACHINE:

Carefully read the instructions for use before connecting the washing machine. Repair or any warranty claim resulting from incorrect connection or use of the washing machine shall not be covered by the warranty.

351677

INSTALLATION AND CONNECTION

REMOVAL OF TRANSPORT BRACKETS

Move the pipes.

Loosen screws at the rear of the machine.

Remove the

brackets.

Slide brackets

into the groove on the blocking rod - the right one should be turned around.

Close the openings with attached plastic pegs.

351677

Use the

brackets to rotate blocking rods for 90° and pull them out.

Be careful to prevent personal injury.

In removing the wrapping be careful not to damage the appliance with a sharp object.

Remove transport protection devices; as running the washing machine with the blocking rods in place could result in damage. Save transport brackets for eventual later use.

Warranty shall be void in cases of such damage.

SELECTING THE ROOM

The appliance should be placed on a surface with concrete base; the surface should be dry and clean in order to prevent slipping. The adjustable feet should also be cleaned before installation.

INSTALLATION

Use a water scale and spanner No. 22 (for feet) and 17 (for the nut).

Put the appliance

in horizontal position by turning the adjustable legs. The legs are adjustable up to +/1 cm.

After the

adjustment tighten the nuts firmly - towards the bottom of the machine!

Vibrations, moving of the appliance and loud operation due to incorrect setting of the adjustable feet shall not be covered by this warranty.

351677

If you have a tumble dryer of the same dimensions, you can place it on top of the washing machine by using the vacuum feet or side by side.

351677

Before connecting the appliance, let it warm up to room temperature (wait at least two hours).

WATER INLET CONNECTION

Insert the gasket with a filter net into the straight inlet hose attachment nut and screw the nut onto the water tap (with some models, the gasket with filter net is already fitted and any additional fitting into the nut on the straight attachment is not required).

To ensure correct operation of the appliance, water pressure inlet must be between 0,05 and 0,8 MPa. Minimum water pressure can be established by measuring the quantity of poured out water. 3 litres of water must be poured out from completely opened tap in 15 seconds.

AQUASTOP

TOTAL AQUA-

STOP

REGULAR

ATTACHMENT

If your model has connections for both hot and cold water, then connect one hose to the cold water supply (blue wing nut or blue mark on the hose) and the other one to the hot water supply (red wing nut or red mark on the hose), as indicated on the back wall of the appliance (letters C and H) (C - cold; H – hot). Hot water (a mixture of hot and cold water) is added only on the programs of 60° or more.

The inlet hose should be tightened manually, firmly enough to prevent any leaks. After tightening the hose, check for any leaks. Use of pliers, wrenches, or other similar tools is not allowed when installing the hose, as these tools can damage the nut thread.

351677

AQUA-STOP (CERTAIN MODELS ONLY)

In case of damage on the interior pipe, leaking is prevented by automatic closing system which stops water inlet to the machine. In such cases display (A) turns red. Inlet pipe must be replaced.

(CERTAIN MODELS ONLY)TOTAL AQUA - STOP

In case of damage on the interior pipe, leaking is prevented by automatic closing system which stops water inlet to the machine. Protection system will also detect whether there is any water leakage in the washing machine interior. In such cases, washing is suspended, water supply is cut off, and machine switches on the pump and signals an error.

351677

Do not immerse the Aqua-stop system inlet pipe into the water, because it contains the electric valve! For connection to the water mains the new hose-sets supplied with the appliance shall be used. Old hose-sets should not be reused.

+ 30 hidden pages