Goldmund MIMESIS SRM2.3 User Manual

GOLDMUND MIMESIS SRM2.3

MONO AMPLIFIER

1

GOLDMUND MIMESIS SRM2.3

MONO AMPLIFIER

USER MANUAL

ATTENTION :

No connection or manipulation must be done before reading those instructions. Damage to the
amplifier may result if the following inst ru ctions are not consciously understood and applied.

2

1 - UNPACKING

You will find in the GOLDMUND MIMESIS SRM2.3 box :

- The amplifier.

- The power cord.

- This manual and the warranty card.

- Accessories and spare fuses.
Please keep the packaging in case you need to transport the amplifier at a later date or if you have to
send it for maintenance.

2 - CHOICE OF AMPLIFIER LOCATION AND COOLING

The GOLDMUND MIMESIS SRM2.3 amplifiers, as all the high quality amplifiers may generate a la rge
amount of heat if driven int o high power.
It is mandatory to allow a proper cooli ng of the heat sinks. Avoid any location which i s not pr op erly
ventilated and avoid putting other equipment on top of them.

3 - LINE VOLTAGE ADJUSTMENT

An AC line voltage selection is possible inside t he cha ssi s. Please ask your dealer for assistance if the
line voltage provided is not appropriate.

ATTENTION : On the 220V position, the GOLDMUND MIMESIS SRM2.3 amplifier will function
properly for AC voltages in betwee n 2 00 V an d 2 45V. On the 110V position, the AC li ne m ust deliver
between 95V and 125V. If your A C line is usually out of these tolerances, please consult your
GOLDMUND dealer.

Please check the value of the mains line fuse . Th is fu se is loca ted in the power cord receptacle. The
lid can be removed with a small screwdriver when the cord is removed.
Use a 3A slow-blow fuse for 220V and a 5A slow- blow fuse for 110V.

3