Gigaset A31008-M601-R101-4-SU19 Operating Instructions Manual
Important information
$
ƒ
Important information
Application
For Gigaset cordless telephones.
Safety precautions
Note:
Read the safety precautions and the manual before use.
Explain their contents to your children, and the potential hazards associated with using the device.
Only use the power supply unit supplied, as indicated on the underside of the device.
The operation of medical appliances may be affected. Be aware of the technical conditions in
your particular environment, e.g. doctor's surgery.
Maintain sufficient distance from other electronic devices (e.g. PC), as these can interfere with
operation.
Do not install the device in a bathroom or shower. It is not waterproof.
Do not use the device in environments with a potential explosion hazard, e.g. auto paint shops.
ENGLISH
If you give your Gigaset Repeater to someone else, make sure you also give them the manual.
All electrical and electronic products should be disposed of separately from the municipal
waste stream via designated collection facilities appointed by the government or the local
authorities.
This crossed-out wheeled bin symbol on the product means the product is covered by the
European Directive 2002/96/EC.
The correct disposal and separate collection of your old appliance will help prevent potential
negative consequences for the environment and human health. It is a precondition for reuse
and recycling of used electrical and electronic equipment.
For more detailed information about disposal of your old appliance, please contact your local
council refuse centre or the original supplier of the product.
15
Introduction
Example with 2 Gigaset Repeaters Additional reception ranges with
Gigaset Repeater
Base station
Contents of the package
● 1 Gigaset Repeater
● 1 power supply unit for Gigaset Repeater
● These operating instructions
Maintenance
Simply wipe the device with a damp cloth or an antistatic cloth. Do not use solvent or a microfibre cloth.
Never use a dry cloth as this can cause static.
Introduction
Your Gigaset Repeater extends the reception range of a maximum of 2 handsets. Up to 6 Gigaset Repeater
units can be used with a single base station thus making available extra extended reception range for each
2 handsets respectively.
The maximum number of handsets that can be registered at your base station is not affected by the
Gigaset Repeater.
Before you start to register the units, install the Gigaset Repeater in close proximity to the base station and
a power sup ply poi nt. If a Gigas et Rep eater i s alrea dy in use, it must be switched on and positioned next to
the base station before registration can commence.
16
Preparing
Socket
for
power
lead
LED’s
Registration button
The power lead supplied is plugged into the socket on the Gigaset
Repeater’s rear side.
The different operating modes are indicated on the front of the
Repeater unit by means of two LED’s (for an explanation, see
page 19).
Preparing
Please refer to the user guide for your phone to check whether your base station is suitable for operating
the repeater and how to prepare it for registering the repeater.
If a repeater can register at your base station, make sure repeater mode is enabled.
Automatic registration
Carry out the following steps:
Gigaset Repeater is enabled (power plug inserted). The de-
$
vice is then in registration mode for a period of five minutes.
Place the base station in Repeater registration mode in the
same way as you would to manually register a handset.
Please refer to the operating instructions for your base station.
ENGLISH
17
Loading...