Gigabyte GA-8IPE1000 PRO3, GA-8IK1100, GA-8KNXP, GA-8I875, GA-8I875 ULTRA Manual [zh]

Serial ATA ( Intel ICH5R) .......................................................................		2
(1)	SATA ................................................................................................................	2
(2)	B I O S S A T A ...................................	3
(3)	RAID BIOS RAID ...................................................................................	5
(4)	S A T A ..............................................	8
(5)	S A T A ..........................................................	10

Serial ATA ( Intel ICH5R)

S A T A

(1)SATA

(2)BIOS SATA

(3)* RAID BIOS RAID

(4)SATA

(5)SATA

(a)S A T A ( S A T A

R A I D )

(c)W i ndow s XP 2000

(1) SATA

S A T A S A T A S AT A ( S A T AS A T A 0 _ SB / S A T A 1 _ SB )

"*" R A I D

Intel ICH5R SATA

- 2 -

(2) B I O S SA TA

B I O S S A T A

1

BIOS POST (Power-On Self Test ) <Del>BIOS C MOS SET UP I nteg rated Per i p her als On-Chip SATA Auto Manual SATA RAID Function Enabled

( 1) RAID SA TA RA ID			Fu nctio n Di sabl ed
	CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
		Integrated Peripherals
On-Chip Primary PCI IDE		[Enabled]				Item Help
On-Chip Secondary PCI IDE		[Enabled]				Menu Level }
On-Chip SATA		[Auto]
x SATA Port0 Configure as		SATA Port0				If a hard disk
SATA Port1 Configure as		SATA Port1				controller card is
SATA RAID Function		[Enabled]				used, set as Disabled
USB Controller		[Enabled]
USB 2.0 Controller		[Enabled]				[Enabled]
USB Keyboard Support		[Disabled]				Enabled onboard IDE
USB Mouse Support		[Disabled]				Port
AC97 Audio		[Auto]
Onboard H/W SATA		[Enabled]				[Disabled]
Serial ATA Function		[RAID]				Disabled onboard IDE
Onboard H/W GIGARAID		[Enabled]				Port
GigaRAID Function		[RAID]
Onboard H/W 1394		[Enabled]
Onboard H/W LAN		[Enabled]
Onboard Serial Port 1		[3F8/IRQ4]
Onboard Serial Port 2		[2F8/IRQ3]
higf: Move	Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit			F1: General Help
F5: Previous Values		F6: Fail-Safe Defaults		F7: Optimized Defaults

1

- 3 -

Intel ICH5R SATA

2

Advanced BIOS Features Hard Disk Boot PriorityMicrosoft Windows 2000/XP SATA ( 2)

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

Hard Disk Boot Priority

1. SCSI-0	:	ST3120026AS	Item Help
2. SCSI-1.	:	ST3120026AS	Menu Level }}
3. Bootable Add-in Cards
			Use <h> or <i> to
			select a device, then
			press <+> to move it
			up, or <-> to move it
			down the list. Press
			<ESC> to exit this
			menu.

hi: Move PU/PD/+/-: Change Priority F10: Save ESC: Exit

2

3

First Boot Device CD-R OM CD-R OM ( 3)

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

Advanced BIOS Features

} Hard Disk Boot Priority	[Press Enter]	Item Help
First Boot Device	[CDROM]	Menu Level }
Second Boot Device	[Hard Disk]
Third Boot Device	[CDROM]
Password Check	[Setup]
Limit CPUID Max. to 3	[Enabled]
DRAM Data Integrity Mode	Non-ECC

higf: Move	Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
F5: Previous Values		F6: Fail-Safe Defaults		F7: Optimized Defaults

3

4

B I O S

Intel ICH5R SATA

- 4 -