Gigabyte GA-7IX Manual

Aug. 4, 1999

Signature:

Date:

ERIC LU

Eric Lu

Representative Person's Name:

Conforms to the following specifications:

FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a), Class B Digital Device

Supplementary Information:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful

and (2) this device must accept any inference received, including that may cause undesired operation.

Model Number:

GA-7IX

DECLARATION OF CONFORMITY

Per FCC Part 2 Section 2. 1077(a)

Responsible Party Name: G.B.T. INC.

Address: 18305 Valley Blvd., Suite#A LA Puent, CA 91744

Phone/Fax No: [phone]/ [phone] hereby declares that the product

Product Name: Mother Board

FCC Compliance Statement:

This equipment has been tested and found to comply with limits for a Class B digital device , pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television equipment

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna

-Move the equipment away from the receiver

-Plug the equipment into an outlet on a circuit different from that to which the receiver is connected

-Consult the dealer or an experienced radio/television technician for additional suggestions

You are cautioned that any change or modifications to the equipment not expressly approve by the party responsible for compliance could void Your authority to operate such equipment.

This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions 1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation.

Declaration of Conformity

We, Manufacturer/Importer

(full address)

G.B.T. Technology Träding GMbH

Ausschlager Weg 41, 1F, 20537 Hamburg, Germany

declare that the product

( description of the apparatus, system, installation to which it refers)

Mother Board

GA-7IX

is in conformity with

(reference to the specification under which conformity is declared) in accordance with 89/336 EEC-EMC Directive

	EN 55011	Limits and methods of measurement
		of radio disturbance characteristics of
		industrial, scientific and medical (ISM
		high frequency equipment
	EN55013	Limits and methods of measurement
		of radio disturbance characteristics of
		broadcast receivers and associated
		equipment
	EN 55014	Limits and methods of measurement
		of radio disturbance characteristics of
		household electrical appliances,
		portable tools and similar electrical
		apparatus
	EN 55015	Limits and methods of measurement
		of radio disturbance characteristics of
		fluorescent lamps and luminaries
	EN 55020	Immunity from radio interference of
		broadcast receivers and associated
		equipment
	EN 55022	Limits and methods of measurement
		of radio disturbance characteristics of
		information technology equipment
	DIN VDE 0855	Cabled distribution systems; Equipment
	part 10	for receiving and/or distribution from
	part 12	sound and television signals

CE marking

EN 61000-3-2*	Disturbances in supply systems caused
EN60555-2	by household appliances and similar
	electrical equipment “Harmonics”
EN61000-3-3*	Disturbances in supply systems caused
EN60555-3	by household appliances and similar
	electrical equipment “Voltage fluctuations”
EN 50081-1	Generic emission standard Part 1:
	Residual, commercial and light industry
EN 50082-1	Generic immunity standard Part 1:
	Residual, commercial and light industry
EN 55081-2	Generic emission standard Part 2:
	Industrial environment
EN 55082-2	Generic immunity standard Part 2:
	Industrial environment
ENV 55104	Immunity requirements for household
	appliances tools and similar apparatus
EN 50091- 2	EMC requirements for uninterruptible
	power systems (UPS)

(EC conformity marking)

The manufacturer also declares the conformity of above mentioned product with the actual required safety standards in accordance with LVD 73/23 EEC

EN 60065	Safety requirements for mains operated	EN 60950	Safety for information technology equipment
	electronic and related apparatus for		including electrical business equipment
	household and similar general use

EN 60335 Safety of household and similar electrical appliances

(Stamp)

EN 50091-1	General and Safety requirements for
	uninterruptible power systems (UPS)
Manufacturer/Importer
	Signature	:	Rex Lin
Date : Aug. 4, 1999	Name	:	Rex Lin

7IX

AMDTM Athlon AGP Motherboard

USER'S MANUAL

AMDTM Athlon Processor MAINBOARD

REV. 1.0 First Edition

R-10-01-090817

TABLE OF CONTENT

Revision History	P.1
Item Checklist	P.2
Summary of Features	P.3
7IX Motherboard Layout	P.5
Page index for Connectors / Panel and Jumper Definition	P.6
Performance List	P.18
Block diagram	P.19
Memory Installation	P.20
Page index for BIOS Setup	P.21
Appendix	P.55

How this manual is organized

This manual is divided into the following sections:

1)	Revision List	Manual revision information
2)	Item Checklist	Product item list
3) Features		Product information & specification
4)	Hardware Setup	Instructions on setting up the motherboard
5)	Performance & Block Diagram	Product Performance & Block Diagram
6)	BIOS Setup	Instructions on setting up the BIOS
		software
7)	Appendix	General reference

7IX Motherboard

Revision History

Revision	Revision Note	Date
1.01	Initial release of the 7IX motherboard user’s manual.	Aug.1999

The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein. Third-party brands and names are the property of their respective owners.

Sound Blaster is a registered trademark of Creative Technology Ltd in the United States and certain other countries. Sound Blaster-LINK and SB-LINK are trademarks of Creative Technology Ltd.

August 17, 1999 Taipei, Taiwan, R.O.C

Item Checklist

Item Checklist

þThe 7IX Motherboard

þCable for IDE / Floppy device

þDiskettes or CD (TUCD) for motherboard utilities

oInternal COM2 Cable (Optional for VGA/AGP on-board Motherboard) oInternal USB Cable (Optional for Baby AT Motherboard)

oCable for SCSI device oDisplay Driver(Optional) oSound Driver (Optional)

þ7IX User’s Manual

oLan Driver (Optional)

oSCSI Driver (Optional)

7IX Motherboard

Summary Of Features

Form factor	Ÿ	30.5 cm x 20.7 cm ATX SIZE form factor, 4 layers PCB.
CPU	Ÿ	AMD Athlon(K7) Slot A Processor
	Ÿ 512 KB 2nd cache in CPU Module
	Ÿ Supports 500MHz ~ 1GHz and faster
Chipset	AMD 750 ,consisting of:
	Ÿ AMD 751 PCI/AGP Controller(PAC)
	Ÿ AMD 756 PCI ISA IDE Controller
Clock Generator	Ÿ	Supports 100MHz
Memory	Ÿ	3 168-pin DIMM Sockets
	Ÿ	Supports SDRAM 16MB~256MB
	Ÿ Supports only 3.3V SDRAM DIMM
I/O Control	Ÿ	Winbond 83977
Slots	Ÿ	1 AGP (Accelerated Graphics Port) slot
		- AGP 66 / 133 MHz 3.3V device support
	Ÿ	5 32-bit Master PCI Bus slots
	Ÿ 2 16-bit ISA Bus slots
On-Board IDE	Ÿ	An IDE controller on the AMD 756 PCI chipset
		provides IDE HDD/ CD-ROM with PIO, Bus Master ,
		Ultra DMA/33, and ATA 66 Operation modes
	Ÿ Can connect up to four IDE devices
On-Board	Ÿ	1 Floppy port supports 2 FDD with 360K, 720K,1.2M,
Peripherals		1.44M and 2.88M bytes
	Ÿ 1 Parallel port supports SPP/EPP/ECP mode
	Ÿ 2 Serial Ports (COMA & COMB)
	Ÿ	4 USB ports
	Ÿ 1 IrDA connector for Fast IrDA
Hardware Monitor	Ÿ	CPU/Power Supply/Chassis Fan Revolution detect
(Optional)	Ÿ	CPU Fan Control
	Ÿ	System Voltage Detect
	Ÿ	CPU Overheat Warning
	Ÿ	Chassis Intrusion Detect
	Ÿ Display Actual Current Voltage

To be continued…

			Summary Of Features
	PS/2 Connector	Ÿ PS/2â Keyboard interface and PS/2â Mouse
		interface
	BIOS	Ÿ	Licensed AWARD BIOS, 2M bit FLASH RAM
	Additional Features	Ÿ	Internal/External Modem Wake up
		Ÿ Keyboard Password Wake up
		Ÿ	Mouse Wake Up
		Ÿ	LAN Wake up
		Ÿ System after AC back

7IX Motherboard

7IX Motherboard Layout

PS/2

JP2

POWERATX

USB

JP10

AMD751

J9

JP1

AGP

JP3

PCI1

7IX

PCI2

PCI3	BZ1
	JP9

AMD756

PCI4
JP4	JP5
BIOS
PCI5
ISA1
	BAT1
ISA2	J6

7IX Motherboard Layout

7IX Motherboard

	$	Page
	Page index for Connectors / Panel and Jumper Definition
	Connectors	P.7
	COMA / COMB / LPT Port	P.7
	USB Connector	P.7
	PS/2 Keyboard & PS/2 Mouse Connector	P.8
	PWR FAN	P.8
	CPU FAN / SYSTEM FAN	P.9
	ATX PWR	P.10
	FLOPPY	P.10
	IDE 1(Primary) / IDE 2(Secondary)	P.11
	USB Port	P.11
	IR (Optional)	P.12
	Panel and Jumper Definition	P.13
	J22 (2x11 pins jumper)	P.13
	JP10 (Keyboard Power On)	P.14
	JP1 (CASE OPEN)	P.14
	JP3 (CLEAR CMOS)	P.15
	JP9 (RING PWR ON)	P.15
	JP4 (Wake On LAN)	P.16
	JP5 (Internal Buzzer Connector)[Optional]	P.16
	BAT 1	P.17

7IX Motherboard

Connectors

COM A / COM B / LPT Port

LPT PORT

COM A COM B

USB Connector

																													5 6 7 8
																																				Pin No.	Definition
																																				1	USB V0
																																				2	USB D0-
																																				3	USB D0+
																																				4	GND
																																				5	USB V1
																													1 2		3
																																		4
																																				6	USB D1-
																																				7	USB D1+
																																				8	GND

				Connectors
	PS/2 Keyboard & PS/2 Mouse Connector
	PS/2 Mouse		PS/2 Mouse/ Keyboard
			Pin No.	Definition
	6	5	1	Data
			2	NC
	4	3
			3	GND
	2	1	4	VCC(+5V)
			5	Clock
	PS/2 Keyboard
			6	NC

POWER FAN

																														1					Pin No.	Definition
																																			1	GND
																																			2	+12V
																																			3	SENSE

7IX Motherboard

CPU FAN

																																							Pin No.	Definition
																																						1	1	GND
																																							2	+12V
																																							3	SENSE

SYSTEM FAN

																																		1	Pin No.	Definition
																																			1	GND
																																			2	+12V
																																			3	SENSE

Connectors

ATX PWR

FLOPPY

	10 20
				Pin No.	Definition
				3,5,7,13,15-17	GND
				1,2,11	3.3V
				4,6,19,20	VCC
				10	+12V
				12	-12V
				18	-5V
	1	11
				8	Power Good
				9	5V SB stand by+5V
				14	PS-ON(Soft On/Off)

RED LINE

7IX Motherboard

IDE1(Primary) , IDE2 (Secondary)

RED LINE

IDE 1 IDE 2

USB : USB Port

																																							Pin No.	Definition
																																							1	VCC
																																							2	USB D0−
																																					1		3	USB D0+
																																							4	GND
																																							5	VCC
																																							6	USB D1−
																																							7	USB D1+
																																							8	GND