Gigabyte GA-6VM7-4I, GA-6VM7-4I-1 User Manual [zh]

Phone/Fax No: (818) 854- 9338/ (818) 854-9339
hereby declare s that the product
Product Name:
Model Number:
Mother Board
Signature:
Date: Feb. 9, 2001
GA- 6VM7- 4I
FCC Compliance Statement:
DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2. 1077(a)
This equipment has been tested and found to comply with limits for a Class B digital device ,
Responsible Party Name: G.B.T. INC.
Address: 18305 Valley Blvd., Suite#A
LA Puent, CA 91744
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio
Conforms to the following specifications:
FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a), Class B Digital Device
Supplementary Information:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful and (2) this device must accept any inference received, including that may cause undesired operation.
Representative Person's Name: ERIC LU
Eric Lu
frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or
television equipment reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Move the equipment away from the receiver
-Plug the equipment into an outlet on a circuit different from that to which the receiver is connected
You are cautioned that any change or modifications to the equipment not expressly approve by the party respons ible for compliance could void Your authority to operate such equipment.
This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions 1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation.
-Consult the dealer or an experienced radio/television technician for additional suggestions
Declaration of Conformity
We, Manufacturer/Importer
(full address)
G.B.T. Technology Träding GMbH
Ausschlager Weg 41, 1F, 20537 Hamburg, Germany
( description of the apparatus, system, installation to which it refers)
(reference to the specification under which conformity is declared)
in accordance with 89/336 EEC-EMC Directive
EN 55011 Limits and methods of measurement EN 61000-3-2* Disturbances in supply systems caused
of radio disturbance characteristics of EN60555-2 by household appliances and similar
industrial, scientific and medical (ISM electrical equipment “Harmonics” high frequency equipment
EN55013 Limits and methods of measurement EN61000-3-3* Disturbances in supply systems caused of radio disturbance characteristics of EN60555-3 by household appliances and similar broadcast receivers and associated electrical equipment “Voltage fluctuations” equipment
EN 55014 Limits and methods of measurement EN 50081-1 Generic emission standard Part 1: of radio disturbance characteristics of Residual, commercial and light industry household electrical appliances, portable tools and similar electrical EN 50082-1 Generic immunity standard Part 1: apparatus Residual, commercial and light industry
EN 55015 Limits and methods of measurement EN 55081-2 Generic emission standard Part 2: of radio disturbance characteristics of Industrial environment fluorescent lamps and luminaries
EN 55020 Immunity from radio interference of EN 55082-2 Generic immunity standard Part 2: broadcast receivers and associated Industrial environment equipment
EN 55022 Limits and methods of measurement ENV 55104 Immunity requirements for household of radio disturbance characteristics of appliances tools and similar apparatus information technology equipment
DIN VDE 0855 Cabled distribution systems; Equipment EN 50091- 2 EMC requirements for uninterruptible
part 10 for receiving and/or distribution from power systems (UPS)
part 12 sound and television signals
declare that the product
Mother Board
GA-6VM7-4I
is in conformity with
CE marking (EC conformity marking)
The manufacturer also declares the conformity of above mentioned product
with the actual required safety standards in accordance with LVD 73/23 EEC
EN 60065 Safety requirements for mains operated EN 60950 Safety for information technology equipment
electronic and related apparatus for including electrical business equipment household and similar general use
EN 60335 Safety of household and similar EN 50091-1 General and Safety requirements for electrical appliances uninterruptible power systems (UPS)
Signature
Date : Feb. 9, 2001 Name : Rex Lin
(Stamp)
Manufacturer/Importer
:
Rex Lin
6VM7-4I
Socket 370 處理器主機板
中文安裝手冊
Socket 370 處理器主機板
REV. 5.0 Second Edition
R-50-02-010628C
12MC-6VM74I-5002
使用手冊之組織架構
此安裝手冊是依下列章節組織而成:
1) 版本修改摘要 使用手冊版本修改資訊
2) 清點附件 產品盒內附件清單
3) 特色彙總 主機板詳細資訊和規格
4) 硬體設定 主機板安裝指南
5) 效能測試和晶片組功能方塊圖 主機板效能測試結果和晶片組功 能方塊圖
6) Suspend to RAM STR 安裝說明
7) BIOS 功能設定 BIOS 功能設定指南
8) 附錄 參考資料
版本修改摘要
清點附件 P.2
特色彙總 P.3
6VM7 -4I 主機板的元件配置圖 P.5
CPU 速度設定 / 插座及接腳設定的快速安裝指南目錄 P.6
效能測試 P.30
晶片組功能方塊圖 P.31
安裝 Suspend to RAM 功能 P.32
記憶體安裝指南 P.38
BIOS 功能設定目錄 P.39
附錄 P.68
P.1
6VM7-4I 主機板
版本修改摘要
版本 修改摘要 日期
5.0
5.0
本手冊所有提及之商標與名稱皆屬該公司所有。
本手冊若有任何內容修改,恕不另行通知。
6VM7 -4I 主機板中文安裝手冊首版發行。 6VM7 -4I 主機板中文安裝手冊第二版發行。
2001 6 28 日 台北,台灣
Mar.2001 Jun.2001
1
清點附件
þ 6VM7 -4I 主機板一片 þ 軟、硬碟插座排線各一條 þ 主機板驅動程式光碟片(TUCD) þ 6VM7 -4I 中文使用手冊
清點附件
2
6VM7-4I 主機板
特色彙總
規格 Ÿ 主機板採四層設計 Micro ATX 規格 24.3公分 x 21.0 公分
CPU Ÿ Socket 370 處理器
Intel Pentium!!! 100/133MHz FSB, FC-PGA Intel CeleronTM 66/100MHz FSB, FC-PGA
VIA Cyrix III 100MHz FSB, CPGA (請確認您所使用的 CPU 為量產中版本)
Ÿ L2
快取記憶體取決於 CPU
晶片組 時脈產生器
記憶體 Ÿ 2 168-pin DIMM 插槽
I/O 控制器 擴充槽 Ÿ 1 個 AGP 擴充槽, 支援 4X mode 及 AGP 2.0 compliant
內建 IDE Ÿ IDE 控制器內建在 VIA VT82C686B PCI 晶片內,提供 PIO,
內建周邊設備 Ÿ 1 個軟碟插座支援兩台磁碟機
硬體監控 Ÿ CPU/系統風扇轉速偵測
Ÿ VT82C694X (VIA Apollo Pro 133A) Ÿ VT82C686B
Ÿ ICS 9248DF-39 Ÿ 支援 66/100/133 MHz system bus speeds (PCI 33MHz) Ÿ 75/83/112/124/140/150 MHz system bus speeds
(PCI 44MHz) (reserved)
Ÿ 支援 PC-100 / PC-133 SDRAM VCM SDRAM Ÿ 最高可支援到 1.0GB Ÿ 僅支援 3.3V SDRAM DIMM Ÿ 支援 72 位元 ECC 類型 DIMM 模組 Ÿ VT82C686B
Ÿ 2 32-bit PCI Bus 擴充槽 Ÿ 1 個 16-bit 的 ISA Bus 擴充槽(選購)
Ÿ 1 AMR (Audio Modem Riser) 擴充槽
Bus Master (Ultra DMA/33ATA 66 ATA100) 操作模式的 IDE HDD/CD-ROM
Ÿ 可連接四個 IDE 裝置
(360K ,720K ,1.2M ,1.44M 2.88M bytes )
Ÿ 1 個並列插座可支援 Normal/EPP/ECP 模式 Ÿ 2 個串列插座 (COM A COM B) Ÿ 4 USB 插座
Ÿ CPU/系統散熱風扇溫度偵測 Ÿ 系統電壓自動偵測 Ÿ 偵測 CPU 過溫自動關機
續下頁
3
PS/2 插座 BIOS Ÿ 使用經授權 AMI BIOS, 2M bit 快閃記憶體
內建音效 Ÿ 內建 VIA 音效晶片(VIA VT82C686B) 附加特色 Ÿ 包含 3 個散熱風扇電源接腳
Ÿ PS/2
Ÿ 鍵盤過電流保護. Ÿ 支援(Suspend-To-RAM)功能. Ÿ 網路遠端開機功能 Ÿ 內接型/外接型數據機開機功能
鍵盤連接埠及 PS/2 滑鼠連接埠
特色彙總
4
6VM7-4I 主機板
694X
COMB
COMA
LPT
J8
J7
JP15
ISA1
6VM7-4I 主機板的元件配置圖
PS/2
JP3
USB
JP18
GAME & AUDIO
JP22
JP16
J5
JP7
JP8
JP9
SW2
BIOS
PCI1
PCI2
AMR
AGP 1
ATX POWER
PGA 370
CPU
VT82C
6VM7-4I
JP5
LED1 LED2
JP11
IDE2
DIMM1
VT82C
686B
IDE1
SW1
DIMM2
J3
JP2
BZ1
USB2
BAT1
JP23
JP26
J1
FLOPPY
JP1
J13
J12
J2
5
6VM7-4I 主機板的元件配置圖
$ CPU速度設定 / 插座及接腳設定的快速安裝指南目錄 頁數 CPU速度設定
插座 遊戲搖桿及音源插座
COM A 串列插座/ COM B 串列插座/ LPT 並列插座 USB 1 規格插座 PS/2 鍵盤及PS/2 滑鼠插座 USB 2規格插座 JP16 (CPU散熱風扇電源接腳) JP15 (電源散熱風扇電源接腳) JP2 (系統散熱風扇電源接腳) ATX 電源插座 Floppy Port (軟碟插座) 第一組IDE 1插座 / 第二組IDE 2插座 J7 (TEL) (內接數據機音源接腳) J5 (AUX IN 接腳) J8 (光碟機音源線接腳) J13 IR (紅外線連接端) J3 (Ring Power On) (內建數據機喚醒功能接腳) J1 (Wake on LAN) (網路喚醒功能接腳)
P.7 P.15 P.15 P.15 P.16 P.16 P.17 P.17 P.18 P.18 P.19 P.19 P.20 P.20 P.21 P.21 P.22 P.22 P.23
JP3 (Audio Out) P.23 JP26 (CD_IN) P.24
JP5 /LED1 (STR 指示燈連接頭 & LED 1: DIMM 指示燈) 接腳定義說明 J2 (2x11 Pins 接腳說明) J12 (2x7 Pins接腳說明) JP1 (清除CMOS功能接腳) JP23 (主機板外殼開啟顯示接腳) JP7/JP8/JP18 (內建AC97& AMR 選擇) JP9 (USB裝置喚醒功能接腳) JP22 (BIOS寫入保護) JP11 (STR功能選擇接腳)
P.24 P.25 P.25 P.26 P.27 P.27 P.28 P.28 P.29 P.29
6
6VM7-4I 主機板
X 3 O X O O
X 3.5
X X O O X 4 O O X O
X 4.5
X O X O X 5 O X X O
X 5.5
X X X O X 6 O O O X
X 6.5
X O O X X 7 O X O X
X 7.5
X X O X X 8 O O X X
X 8.5
O X O O X 9
X X O O X 9.5
X O O O X 10
X O X X X 10.5
O O X O X11 O X X X
X11.5
X O X
O
CPU 速度設定
系統速度可以選擇設定為 66, 100, 133MHz及Auto。您可以選擇系統速度(SW1)並使 用DIP SWITCH (SW2) 來設定CPU速度。所支援CPU的頻率從 500MHz – 1Ghz 以上.
O : ON, X : OFF
SW1:CPU (MHz) PCI(MHz) 1 2 3 4 5 6
Auto 33.3 X X X X O O
66 33.3 O O X X X X 75 37.5 O O O X X X 83 41.6 O O X O X X
100 33.3 O X X X X X
112 37.3 O X O X X X 124 31 X X X O X X 133 33.3 X X X X X X 140 35 X X O O X X 150 37.5 X X O X X X
M
請注意主機板上DIP SWITCH (SW2)設定的倍頻及外頻,需要和 CPU的倍頻及外頻
相符合,否則易造成系統當機。
SW2:FREQ. RATIO
1 2 3 4
DIP SWITCH
7
CPU 速度設定
X13 X X X O
X14
O O O X X15
X O O X X16 O X O X
X12 O X X O
M 若您使用 Intel 鎖頻的中央處理器, CPU 的倍頻設定將無作用.
F
外頻為Auto的接腳設定:
ON
1 2 3 4 5 6
SW1
«注意:
1. 如果您使用外頻為 66, 100, 133MHzCPU, 我們建議您將系統速度設定為”Auto” 我們不建議您設定
2.
範圍. 如果您要將系統速度設定為 體規格設定
1. Celeron
, 例如:CPU,
TM
1 2 3 4
75 / 83 / 112 / 124 / 140 /150MHz,
顯示卡, 記憶體,硬碟來設定。
533/ 66 MHz FSB
ON
75 / 83/ 112 / 124 / 140 / 150MHz ,
因為那不屬於硬體標準規格
ON
請依據您的硬
SW2
SW2
1 2 3 4 5 6
SW1
8
6VM7-4I 主機板
ON
ON
ON
ON
2. CeleronTM 566/ 66 MHz FSB
ON
1 2 3 4
SW2
SW1
3. CeleronTM 600/ 66 MHz FSB
ON
1 2 3 4
SW2
SW1
4. CeleronTM 633/ 66 MHz FSB
ON
1 2 3 4
1 2 3 4 5 6
1 2 3 4 5 6
SW2
5. CeleronTM 667/ 66 MHz FSB
ON
1 2 3 4
SW2
SW1
SW1
1 2 3 4 5 6
1 2 3 4 5 6
9
6. CeleronTM 700/ 66 MHz FSB
ON
ON
ON
ON
ON
1 2 3 4
SW2
7. Cryix III 550/100MHz FSB
ON
1 2 3 4
SW2
8. Cryix III 600/100MHz FSB
ON
1 2 3 4
SW1
SW1
CPU 速度設定
1 2 3 4 5 6
1 2 3 4 5 6
SW2
9. Pentium® !!! 500/100MHz FSB
ON
1 2 3 4
SW2
SW1
SW1
1 2 3 4 5 6
1 2 3 4 5 6
10
6VM7-4I 主機板
ON
ON
ON
ON
10. Pentium® !!! 550/100MHz FSB
ON
1 2 3 4
SW2
11. Pentium® !!! 600/100MHz FSB
ON
1 2 3 4
SW2
12. Pentium® !!! 650/100MHz FSB
ON
1 2 3 4
SW1
SW1
1 2 3 4 5 6
1 2 3 4 5 6
SW2
13. Pentium® !!! 700/100MHz FSB
ON
1 2 3 4
SW2
SW1
SW1
1 2 3 4 5 6
1 2 3 4 5 6
11
14. Pentium® !!! 750/100MHz FSB
ON
ON
ON
ON
ON
1 2 3 4
SW2
SW1
15. Pentium® !!! 800/100MHz FSB
ON
1 2 3 4
SW2
SW1
16. Pentium® !!! 850/100MHz FSB
ON
1 2 3 4
CPU 速度設定
1 2 3 4 5 6
1 2 3 4 5 6
SW2
17. Pentium® !!! 533/133MHz FSB
ON
1 2 3 4
SW2
SW1
SW1
1 2 3 4 5 6
1 2 3 4 5 6
12
6VM7-4I 主機板
ON
ON
ON
ON
18. Pentium® !!! 600/133 MHz FSB
ON
1 2 3 4
SW2
SW1
19. Pentium® !!! 667/133MHz FSB
ON
1 2 3 4
SW2
20. Pentium® !!! 733/133MHz FSB
ON
1 2 3 4
SW1
1 2 3 4 5 6
1 2 3 4 5 6
SW2
21. Pentium® !!! 800/133MHz FSB
ON
1 2 3 4
SW2
SW1
SW1
1 2 3 4 5 6
1 2 3 4 5 6
13
22. Pentium® !!! 866/133MHz FSB
ON
ON
ON
ON
1 2 3 4
SW2
23. Pentium® !!! 933/133MHz FSB
ON
1 2 3 4
SW2
SW1
SW1
24. Pentium® !!! 1GHz/133MHz FSB
ON
1 2 3 4
CPU 速度設定
1 2 3 4 5 6
1 2 3 4 5 6
1 2 3 4 5 6
SW2
SW1
14
6VM7-4I 主機板
插座
遊戲搖桿及音源插座
Game
Port
Line Out
MIC
Line In
COM A 串列插座/ COM B 串列插座/ LPT並列插座
LPT Port
COM B COM A
15
USB 1 規格插座
1
插座及接腳設定的快速安裝指南
PS/2 鍵盤及 PS/2 滑鼠插座
4 3 2 1
5 6 7 8
接腳
1 USB V0 2 USB D0­3 USB D0+ 4 接地線
5 USB V1 6 USB D1­7 USB D1+ 8
PS/2 滑鼠
5 6
4
2
PS/2
鍵盤
3
PS/2 鍵盤/滑鼠
接腳 定義
1 資料訊號線 2 無作用 3 接地線 4 VCC(+5V) 5 時脈 6 無作用
定義
接地線
16
6VM7-4I 主機板
USB 2規格插座
2
1
JP16 : CPU散熱風扇電源接腳
接腳 定義
10
1 5V 電源 2 3 USB D2-
9
4 空腳 5 USB D2+
6 USB D3+ 7 空腳 8 USB D3­9 接地腳
10 5V電源
1
接腳 定義
1 風扇運轉控制 2 +12V
3 偵測訊號線
接地腳
17
JP15 :電源散熱風扇電源接腳
1
JP2 :系統散熱風扇電源接腳
插座及接腳設定的快速安裝指南
接腳 定義
1 風扇運轉控制 2 +12V
3 無作用
1
接腳 定義
1 風扇運轉控制 2 +12V
3 偵測訊號線
18
Loading...
+ 58 hidden pages