Gigabyte GA-6OXM7E, GA-6OXM7E-1 User Manual [zh]

Phone/Fax No: (818) 854- 9338/ (818) 854-9339
hereby declare s that the product
Product Name:
Model Number:
Mother Board
Signature:
GA- 6OXM7E
FCC Compliance Statement:
DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2. 1077(a)
This equipment has been tested and found to comply with limits for a Class B digital device,
Responsible Party Name: G.B.T. INC.
Address: 18305 Valley Blvd., Suite#A
LA Puent, CA 91744
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio
Conforms to the following specifications:
FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a), Class B Digital Device
Supplementary Information:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful and (2) this device must accept any inference received, including that may cause undesired operation.
Representative Person's Name: ERIC LU
Eric Lu
Date: Jun. 13, 2000
frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or
television equipment reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Move the equipment away from the receiver
-Plug the equipment into an outlet on a circuit different from that to which the receiver is connected
You are cautioned that any change or modifications to the equipment not expressly approve by the party responsible for compliance could void Your authority to operate such equipment.
This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions 1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation.
-Consult the dealer or an experienced radio/television technician for additional suggestions
Declaration of Conformity
We, Manufacturer/Importer
(full address)
G.B.T. Technology Träding GMbH
Ausschlager Weg 41, 1F, 20537 Hamburg, Germany
( description of the apparatus, system, installation to which it refers)
(reference to the specification under which conformity is declared)
in accordance with 89/336 EEC-EMC Directive
EN 55011 Limits and methods of measurement EN 61000-3-2* Disturbances in supply systems caused
of radio disturbance characteristics of EN60555-2 by household appliances and similar
industrial, scientific and medical (ISM electrical equipment “Harmonics” high frequency equipment
EN55013 Limits and methods of measurement EN61000-3-3* Disturbances in supply systems caused of radio disturbance characteristics of EN60555-3 by household appliances and similar broadcast receivers and associated electrical equipment “Voltage fluctuations” equipment
EN 55014 Limits and methods of measurement EN 50081-1 Generic emission standard Part 1: of radio disturbance characteristics of Residual, commercial and light industry household electrical appliances, portable tools and similar electrical EN 50082-1 Generic immunity standard Part 1: apparatus Residual, commercial and light industry
EN 55015 Limits and methods of measurement EN 55081-2 Generic emission standard Part 2: of radio disturbance characteristics of Industrial environment fluorescent lamps and luminaries
EN 55020 Immunity from radio interference of EN 55082-2 Generic immunity standard Part 2: broadcast receivers and associated Industrial environment equipment
EN 55022 Limits and methods of measurement ENV 55104 Immunity requirements for household of radio disturbance characteristics of appliances tools and similar apparatus information technology equipment
DIN VDE 0855 Cabled distribution systems; Equipment EN 50091- 2 EMC requirements for uninterruptible
part 10 for receiving and/or distribution from power systems (UPS)
part 12 sound and television signals
declare that the product
Mother Board
GA-6OXM7E
is in conformity with
CE marking (EC conformity marking)
The manufacturer also declares the conformity of above mentioned product
EN 60065 Safety requirements for mains operated EN 60950 Safety for information technology equipment
electronic and related apparatus for including electrical business equipment household and similar general use
EN 60335 Safety of household and similar EN 50091-1 General and Safety requirements for electrical appliances uninterruptible power systems (UPS)
Signature
with the actual required safety standards in accordance with LVD 73/23 EEC
Date: Jun. 13, 2000 Name : Rex Lin
(Stamp)
Manufacturer/Importer
Rex Lin
:
6OXM7E 系列
Socket 370 處理器主機板
中文安裝手冊
Socket 370 處理器主機板
REV. 1.0 Second Edition
R-10-02-000728C
使用手冊之組織架構
此安裝手冊是依下列章節組織而成:
1) 版本修改摘要
2) 清點附件
3) 特色摘要
4) 硬體設定
5) 效能測試和晶片組功能方塊
6) Suspend to RAM & Dual BIOS STR & Dual BIOS安裝說明
7) Four Speaker & SPDIF
8) BIOS 功能設定 BIOS功能設定指南
9) 附錄
使用手冊版本修改資訊
產品盒內附件清單
主機板詳細資訊和規格
主機板安裝指南
主機板效能測試結果和晶片組功能 方塊圖
Four Speaker & SPDIF安裝說明
參考資料
版本修改摘要
清點附件
特色彙總
6OXM7E系列主機板的元件配置圖 P.5
插座及接腳設定的快速安裝指南
效能測試
晶片組功能方塊圖
安裝Suspend to RAM 功能(選購) P.33
雙BIOS(Dual BIOS)功能介紹 (選購) P.39
Four Speaker & SPDIF功能介紹 (選購) P.46
記憶體安裝指南
BIOS 功能設定目錄 P.52
P.1
P.2
P.3
P.6
P.31
P.32
P.51
附錄
P.83
6OXM7E 系列主機板
版本修改摘要
版本 修改摘要 日期
1.0 6OXM7E系列主機板中文安裝手冊首版發行。 Jun.2000
1.0 6OXM7E系列主機板中文安裝手冊第二版發行。 Jul.2000
本手冊所有提及之商標與名稱皆屬該公司所有。
本手冊若有任何內容修改,恕不另行通知。
2000年7月28日 台北,台灣
1
清點附件
þ 6OXM7E 系列主機板一片 þ 軟、硬碟插座排線各一條 þ 主機板驅動程式光碟片(IUCD) þ 6OXM7E 系列中文使用手冊
清點附件
3
6OXM7E 系列主機板
特色彙總
規格 Ÿ 主機板採四層設計ATX規格30.5 公分 x 21.5 公分 主機板 Ÿ 6OXM7E系列主機板包含6OXM7E, 6OXM7E-1
Ÿ Socket 370 處理器
CPU
晶片組 Ÿ Intel 82815 HOST / AGP / SDRAM Controller
時脈產生器 Ÿ ICS 9250-25
記憶體 Ÿ 4 168-pin DIMM插槽(DIMM4 是選購)
I/O 控制器 Ÿ IT8712 擴充槽 Ÿ 1 AGP擴充槽支援4X mode & AGP 2.0 compliant
內建IDE
內建周邊設備 Ÿ 1 個軟碟插座支援兩台磁碟機
硬體監控 Ÿ CPU/電源供應器/系統風扇轉速偵測
內建音效
Intel Pentium!!! 100/133MHz FSB FC-PGA
Intel CeleronTM 66 MHz FSB FC-PGA
nd
Ÿ 2
Ÿ 82801BA I/O Controller Hub(ICH2)
Ÿ 66/100/133 MHz system bus speeds
Ÿ 支援 PC-100 / PC-133 SDRAM Ÿ 最大支援到 512MB Ÿ 只支援 3.3V SDRAM DIMM
Ÿ 1 DFP /TV Ÿ 6 PCI 擴充槽支援 33MHz & PCI 2.2 compliant Ÿ 1 CNR(Communication and Networking Riser) 擴充槽
Ÿ 2 IDE bus master (UDMA 33/ATA 66/ATA100) IDE
快取記憶體取決於 CPU
可連接 4 ATAPI 裝置
Ÿ 支援 PIO mode 3, 4, UDMA33/ATA66/ATA100 IDE
ATAPI
CD-ROM
(360K ,720K ,1.2M ,1.44M 及 2.88M bytes)
Ÿ 1 個並列插座可支援 SPP/EPP/ECP 模式 Ÿ 2 個串列插座 (COM A & COM B) Ÿ 4 USB 插座 Ÿ 1 個紅外線連接端(可連接 IR/CIR ) (選購)
Ÿ CPU溫度偵測 Ÿ 系統電壓自動偵測 Ÿ 偵測CPU 過溫自動關機 Ÿ Creative CT5880音效晶片(選購) Ÿ AC’97 CODEC Ÿ Line In/Line Out/Mic In/AUX In/CD In/TEL/Game Port
SPDIF (選購) 和 Four Speaker(選購)
3
特色彙總
續下頁
4
Summary of Features
BIOS Ÿ 使用經授權AWARD BIOS, 4M bit 快閃記憶體
Ÿ 支援雙BIOS (Dual BIOS) (選購)
PS/2 插座 附加特色 Ÿ 網路遠端開機功能(Wake-on-LAN)
Ÿ PS/2
Ÿ STR 功能(Suspend-To-RAM) (選購) Ÿ 內接型/外接型數據機開機功能 Ÿ 包含3個散熱風扇電源接腳 Ÿ 鍵盤過電流保護
鍵盤 連接埠及PS/2滑鼠連接埠
5
6OXM7E 系列主機板
6OXM7E 系列主機板的元件配置圖
PGA 370
CPU
J1
PS/2
USB
JP1
JP3
JP4
LED1
JP7
JP6
J2
JP22
JP9
PCI1
PCI2
PCI3
PCI4
PCI5
PCI6
CNR
JP5
Floppy
ATX Power
FW82815
IDE2
BZ1
JP18
JP14
JP19
IDE1
J10
JP12
JP13
J11
JP15
JP27
CN9
J14
J5
J7
J6
AGP
DFP/TV
JP28
JP10
JP11
JP25
DIMM1
DIMM3
DIMM2
ICH2
FW82801BA
DIMM4
6OXM7E
BAT1
Main BIOS
JP20
JP21
COM B
JP23
J12
Backup BIOS
J15
J13
COM A
LPT
VGA
CN7
Game & Audio
AC’97
Creative CT5880
JP26
JP24
5
6OXM7E 系列主機板的元件配置圖
$ CPU 速度設定 / 插座及接腳設定的快速安裝指南
Page
CPU 速度設定 P.8 插座 P.9 遊戲搖桿及音源插座 P.9
COM A串列插座/ COM B串列插座/ LPT 並列插座 P.9 CN2:USB規格插座(Back) PS/2鍵盤及PS/2滑鼠插座 J1 (CPU散熱風扇電源接腳)
電源散熱風扇電源接腳
J2 (
) P.11
J14 (系統散熱風扇電源接腳)
P.10 P.10 P.11
P.12
ATX 電源插座 P.12 JP13: CIR/IR (紅外線連接端/商業用紅外線接腳) P.13 Floppy (軟碟插座) P.13 第一組IDE 1插座 / 第二組IDE 2插座
J13 (Ring Power On) (內建數據機喚醒功能接腳) J12 (Wake On LAN) (網路喚醒功能接腳) J7 (TEL) (數據機內部發聲接腳)
J6 (AUX_IN 接腳)
J5 CD Audio Line In(光碟機音源線接腳)
P.14 P.14 P.15 P.15 P.16
P.16 JP9 (SPDIF) [選購] P.17 JP7 (STR指示燈連接頭& LED1: DIMM LED) [選購] CN9:USB規格插座(Front)[選購] J10 (外部SMBUS設備接腳)
P.17
P.18
P.18 JP27 (SCR)(讀卡機連接頭) P.19
CN8 (數位平面顯示器/電視輸出(DFP/TV Out)) P.19 J15 (IA 控制面板插座 [選購] P.20 CN7 (音源接腳 Front ) [選購] P.20 JP28 (六聲道音源擴充卡插座) [選購] P.21 接腳定義說明 P.22
J11 (2x11 Pins接腳)說明 JP18 (清除CMOS功能接腳)
JP4 (STR功能選擇接腳) [選購] JP26 (內建音效卡功能選擇接腳) [選購] JP3 (PS/2鍵盤開機功能接腳) JP1 (後面板USB設備喚醒功能選擇接腳)
P.22
P.23
P.23
P.24
P.24
P.25
6
6OXM7E 系列主機板
JP22 (主機外殼開啟顯示接腳)
P.25
續下頁
7
6OXM7E 系列主機板的元件配置圖
JP20 (BIOS寫入保護)
P.26 JP21 (Top Block Lock接腳) P.26
JP5 (CPU電壓選擇) P.27 JP6 (DIMM電壓選擇) [選購] P.27 JP12 (內建蜂鳴器開關接腳) [選購] P.28 JP14 (自動重新開機功能接腳) P.28 JP15 (系統啟動方式選擇接腳) P.29 JP19 (前面板USB設備喚醒功能選擇接腳) P.29 JP23 (PCI/AGP 3VAUX) P.30 JP24 (CNR 選擇接腳) [選購] P.30
8
CPU 速度設定
CPU速度設定
您可以利用JP10/JP11 及JP25(見圖1)來做系統外頻切換, 選擇 100MHz 及 133MHz 或Auto. CPU倍頻由 BIOS自動去偵測控制.
M
請注意主機板上設定的倍頻及外頻,需要和CPU的倍頻及外頻相符合,否則易
造成系統當機。
JP10/JP11/JP25: CPU速度設定 (選購)
1
1
1
JP25
JP11
JP10
CPU SDRAM JP25 JP10 JP11
Auto Auto 1-2 1-2 1-2
66 100 1-2 2-3 2-3 100 100 1-2 2-3 Open 133 133 1-2 Open 2-3 133 100 2-3 Open Open
自動組態設定
CPU SDRAM
66 100 100 100 133
Ö
133/100
1
Ö 若您的 CPU 外頻為133 MHz, BIOS 會自動偵測 SDRAM SPD, 判斷Memory 的
最佳執行頻率.
M 若您的主機板上無JP10,JP11JP25接腳, 系統外頻將由BIOS自動偵測. 若是此3
個接腳有效存在, 您可作 66MHz, 100MHz, 133MHz 或 Auto 的頻率選擇.
M請依據您CPU的規格來設定CPU 的頻率,我們不建議您將系統速度設定超過硬
體之標準範圍,因為這些規格對於周邊設備而言並不算是符合標準規格。 如果您要 將系統速度設定超出標準規格 , 請依據您的硬體規格設定, 例如;CPU,顯示卡, 記 憶體,硬碟來設定.
9
6OXM7E 系列主機板
Line Out
插座
遊戲搖桿及音源插座
Game
Port
Line Out 1
Line Out 1: Line Out or SPDIF (
叭或供給AC杜比解碼器
Out”,
其他資訊請參考48頁
( Line In:
用程式中選擇 頁) ”Line In” 會變成”Line Out 2”, 接著你便能在
1及Line In
COM A / COM B / VGA / LPT Port
MIC In
Line In
提供數位音效輸出到喇
一般說來正常模式是
當輸出是數位訊號,將會自動切換到
一般說來正常模式是
“Four Speaker” , (
同時插入二組立體聲喇叭
).
).
”Line In”.
當您在
其他資訊請參考
.
LPT Port
COM A
2
10
VGA
COM B
9 1
”Line
”SPDIF Out”
Creative
46
10
6OXM7E 系列主機板
2
CN2 : USB規格插座(Back)
PS/2鍵盤及 PS/2滑鼠插座
PS/2
6
4
PS/2 鍵盤
8 7 6 5
1
3 4
滑鼠
5
3
2
1
接腳. 定義
1 USB V0 2 USB D0­3 USB D0+ 4 5 USB V1 6 USB D1­7 USB D1+ 8 接地線
PS/2
接腳
1 2 3
接地線
滑鼠/鍵盤
定義
資料訊號線
無作用 接地線
4 VCC(+5V) 5
6
時脈
無作用
11
J1 : CPU 散熱風扇電源接腳
J2 : 電源散熱風扇電源接腳
插座及接腳設定的快速安裝指南
1
接腳 定義
1
風扇運轉控制
2 +12V 3 偵測訊號線
1
接腳 定義
1 風扇運轉控制 2 +12V
3
偵測訊號線
12
6OXM7E 系列主機板
J14 : 系統散熱風扇電源接腳
1
接腳 定義
1 風扇運轉控制 2 +12V
3 偵測訊號線
ATX 電源插座
接腳
10
20
3,5,7,13,
15-17
定義
接地線
1,2,11 3.3V
4,6,19,20 VCC
10 +12V 12 -12V 18 -5V
11
1
8 電源良好訊號 9 5V SB stand by+5V
14 PS-ON(Soft On/Off)
13
插座及接腳設定的快速安裝指南
JP13 : IR/CIR(紅外線連接端/商業用紅外線接腳
1
5 6 10
接腳
1 2 3 IRRX 4 5 IRTX 6 7 CIRRX 8 9
10
Floppy : 軟碟插座
)
定義
電源線 無作用
接地線
無作用
電源線 無作用 無作用
紅色線
14
6OXM7E 系列主機板
第一組 IDE 1插座 / 第二組 IDE 2插座
IDE 2 IDE 1
紅色線
J13 : Ring Power On (內建數據機喚醒功能接腳)
1
接腳 定義
訊號線
1
接地線
2
15
J12 : Wake On LAN (網路喚醒功能接腳)
1
插座及接腳設定的快速安裝指南
J7 : TEL: 數據機內部發聲接腳
接腳 定義
1 +5V SB 2 接地線
3 訊號線
接腳 定義
1 Signal-In 2 接地線
3 接地線 4 Signal-Out
1
16
6OXM7E 系列主機板
J6 : AUX_IN接腳
1
接腳 定義
1 AUX-L 2
接地線 3 接地線 4 AUX-R
J5 : CD Audio Line In (光碟機音源線接腳)
1
接腳 定義
1 Signal-In 2 接地線
3 接地線 4 Signal-Out
17
插座及接腳設定的快速安裝指南
+
JP9 : SPDIF接腳(提供數位音效輸出到喇叭或供給AC3杜比解碼 器)(選購)
1
接腳 定義
1 電源 2 SPDIF OUT 3 接地線
JP7 : STR 指示燈接腳& LED1 : DIMM 指示燈(選購)
DIMM 指示燈
1
指示燈外部接腳
STR
18
6OXM7E 系列主機板
CN9 : USB規格插座(Front) (選購)
J10 : 外部SMBUS設備接腳
1
1
2
9
10
接腳 定義
1,10 +5V
2,9 接地線 3,5 USBP0+/­4,7 無作用 6,8 USBP+/-
接腳 定義
1 SMB CLK 2 無作用
3 接地線 4 SMB DATA 5 +5V
19
Loading...
+ 87 hidden pages