Gigabyte GA-6BXC Manual

0 (0)

6BXC

USER'S MANUAL

1.System power on by PS/2 Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/2 Mouse.

2.System power on by Keyboard: If your ATX power supply supports larger than 300 mA 5V Stand-By current (dependent on the specification of keyboards), you can power on your system by entering password from the keyboard after setting the “Keyboard power on” password in CMOS Setup.

3.Supports 3 steps ACPI LED.

4.Modem Ring-On. (COM A , B).

5.Wake-Up on LAN. (on JP7) (The ATX power supply supports larger than 720 mA 5V Stand-By current)

For Intel Pentiumâ II / III / Celeronä Processor MAINBOARD

REV. 2.0 First Edition

R-20-01-090429

6BXC

The author assumes no responsibility for any errors or omissions which may

appear in this document nor does it make a commitment to update the

information contained herein.

Third-party brands and names are the property of their respective owners.

Sound Blaster is a registered trademark of Creative Technology Ltd in the United States and certain other countries. Sound Blaster-LINK and SB-LINK are trademarks of Creative Technology Ltd.

Apr. 29, 1999 Taipei, Taiwan

1

Quick Installation Guide

I. Quick Installation Guide :

CPU SPEED SETUP

The system bus speed is selectable between 66 / 100 MHz. The user can select the system bus speed (SW1) and change the DIP SWITCH (SW2) selection to set up the CPU speed for 233 - 633MHz processor.

Set System Bus Speed

SW1:

CPU

AGP

1

2

3

4

100 MHz

66 MHz

OFF

OFF

OFF

OFF

133 MHz

89 MHz

OFF

OFF

ON

OFF

112 MHz

75 MHz

OFF

ON

OFF

OFF

66 MHz

66 MHz

ON

OFF

OFF

ON

75 MHz

75 MHz

ON

ON

OFF

ON

83 MHz

83 MHz

ON

OFF

ON

ON

The CPU speed MUST match with the frequency RATIO. It will cause system hanging up if the frequency RATIO is higher than that of CPU.

SW2:

CLK RATIO

1

2

3

4

X3

ON

OFF

ON

ON

X3.5

OFF

OFF

ON

ON

X4

ON

ON

OFF

ON

X4.5

OFF

ON

OFF

ON

X5

ON

OFF

OFF

ON

X5.5

OFF

OFF

OFF

ON

X6

ON

ON

ON

OFF

X6.5

OFF

ON

ON

OFF

X 7

ON

OFF

ON

OFF

X 7.5

OFF

OFF

ON

OFF

X 8

ON

ON

OFF

OFF

X 8.5

OFF

ON

OFF

OFF

X 9

ON

OFF

OFF

OFF

X 9.5

OFF

OFF

OFF

OFF

Note: It’ s strongly recommended that set the system speed according to

your hardware configuration: CPU, SDRAM, Cards, etc.

2

6BXC

+The black part in the picture is the white extruding piece of the DIP switch.

1. Pentiumâ II /Celeronä 233 / 66 MHz FSB

6BXC

4 3

2 1

 

SW1

OFF

 

ON

 

 

PIIX4

SW2

CPU

Intel 440BX

4 3 2 1

OFF ON

2.

Pentiumâ II /Celeronä 266 / 66 MHz FSB

 

 

 

4

3

2

1

4

3

2

1

SW1

 

 

OFF

SW2

 

 

OFF

 

 

ON

 

 

ON

 

 

 

 

 

 

 

3.

Pentiumâ II /Celeronä 300/Celeronä 300A / 66 MHz FSB

4

3

2

1

OFF

4

3

2

1

OFF

SW1

 

 

 

 

SW2

 

 

 

 

 

 

 

 

ON

 

 

 

 

ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4. Pentiumâ II /Celeronä 333 / 66 MHz FSB

4

3

2

1

4

3

2

1

SW1

 

 

OFF

SW2

 

 

OFF

 

 

ON

 

 

ON

 

 

 

 

 

 

3

Quick Installation Guide

5. Pentiumâ II /Celeronä 366 / 66MHz FSB

4

3

2

1

 

OFF

4

3

 

2

 

1

OFF

SW1

 

 

 

 

 

SW2

 

 

 

 

 

 

 

 

 

 

 

 

 

ON

 

 

 

 

 

 

 

 

ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6. Pentiumâ II /Celeronä 400 / 66MHz FSB

 

 

 

 

 

4

3

2

1

 

OFF

4

3

 

2

 

1

 

SW1

 

 

 

 

 

 

 

OFF

 

 

 

 

 

SW2

 

 

 

 

 

 

 

 

 

 

 

 

 

ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7. Pentiumâ II /Celeronä 433 / 66MHz FSB

 

 

 

 

 

 

4

3

2

1

 

OFF

4

3

 

2

 

1

 

SW1

 

 

 

 

 

SW2

 

 

 

 

 

 

 

 

OFF

 

 

 

 

 

ON

 

 

 

 

 

 

 

 

ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8. Pentiumâ II 350 / 100 MHz FSB

 

 

 

 

 

 

 

 

 

4

3

2

1

OFF

4

3

 

2

1

OFF

SW1

 

 

 

 

SW2

 

 

 

 

 

 

 

 

 

 

 

 

 

ON

 

 

 

 

 

 

 

ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9. Pentiumâ II 400 / 100 MHz FSB

 

 

 

 

 

 

 

 

4

3

2

1

OFF

4

3

 

2

1

OFF

SW1

 

 

 

 

SW2

 

 

 

 

 

 

 

 

 

 

 

 

 

ON

 

 

 

 

 

 

 

ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10. Pentiumâ III 450 / 100 MHz FSB

 

 

 

 

 

 

 

 

4

3

2

1

OFF

4

3

 

2

1

OFF

SW1

 

 

 

 

SW2

 

 

 

 

 

 

 

 

 

 

 

 

 

ON

 

 

 

 

 

 

 

ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

6BXC

11. Pentiumâ III 500 / 100 MHz FSB

4

3

2

1

OFF

4

3

2

1

OFF

SW1

 

 

 

 

 

 

 

 

SW2

 

 

 

 

 

 

 

 

 

 

 

 

ON

 

 

 

 

ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12. Pentiumâ III 550 / 100 MHz FSB

 

 

 

 

4

3

2

1

OFF

4

3

2

1

OFF

SW1

 

 

 

 

 

 

 

 

SW2

 

 

 

 

 

 

 

 

 

 

 

 

ON

 

 

 

 

ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

13. Pentiumâ III 600 / 100 MHz FSB

 

 

 

 

4

3

 

2

 

1

OFF

4

3

2

1

 

SW1

 

 

 

 

 

 

 

 

SW2

 

 

 

 

OFF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ON

 

 

 

 

ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

14. Pentiumâ III 650 / 100 MHz FSB

 

 

 

 

 

 

4

3

 

2

 

1

OFF

4

3

2

1

 

SW1

 

 

 

 

 

 

 

 

SW2

 

 

 

 

OFF

 

 

 

 

 

 

 

ON

 

 

 

 

ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

Quick Installation Guide

II. Jumper setting :

SPK : Speaker Connector

6BXC

1

+ CPU

 

Pin

Function

 

Intel

VCC

 

1 440BX

 

2

NC

 

3

NC

PIIX4

4

Data

1 +

RE : Reset Switch

 

CPU

 

Open:

6BXC

Normal operation

Intel

440BX

Short:

 

 

Reset system

 

PIIX4

6

Gigabyte GA-6BXC Manual

6BXC

 

 

 

PW LED : Power LED Connector

 

 

 

 

 

CPU1

 

6BXC

Pin

Intel

Function

 

 

1

440BX

 

 

LED anode(+)

 

2

LED cathode()

 

3

LED cathode()

PIIX4

 

 

 

1

 

 

 

HD : IDE Hard Disk Active LED

6BXC

1

 

CPU

Pin

Function

1

LEDIntel anode(+)

2

440BX

LED cathode()

PIIX4

1

Pin

Function

 

1

LED anode(+)

2LED cathode()

3LED cathode()

4LED anode(+)

7

Quick Installation Guide

IR : Infrared Connector (Optional)

 

 

1 CPU

 

6BXC

 

Pin

Intel

Function

 

 

440BX

 

1

 

IR Data Output

 

 

 

 

 

2

 

GND

 

PIIX4

3

 

IR Data Input

 

4

 

NC

 

 

 

 

 

5

 

POWER (+)

GN : Green Function Switch

 

CPU

 

Open:

6BXC

Normal

Inteloperation

440BX

Short:

 

 

Entering

 

Green mode

 

PIIX4

8

6BXC

GD : Green LED

 

 

CPU

 

6BXC

 

Intel1

 

Pin

440BX

Function

 

 

 

 

1

LED anode(+)

 

2

LED cathode()

 

PIIX4

 

 

 

1

 

 

PW: Soft Power Connector

 

CPU

1

6BXC

Open: Intel

 

440BX

 

Normal Operation

 

 

Short:

 

PIIX4

Power On/Off

 

1

 

9

Quick Installation Guide

POWER1 : Power Connector

1

 

 

11

 

 

Pin

 

Function

3,5,7,13,6BXC

 

GND

15-17

 

 

 

1,2,11

 

3.3V

4,6,19,20

PIIX4

VCC (+5V)

10

+12V

 

12

 

12V

185V

8Power Good

95V SB (Stand by +5V)

14 PS-ON (Soft ON/OFF)

CPU

Intel

440BX

PS/2 Mouse / Keyboard Connector

PS/2 Mouse

 

 

 

 

CPU

 

PS/2 Mouse/Keyboard

6BXC

Pin

Function

1

Data Intel

 

440BX

2

NC

 

 

3

GND

PIIX4

4

VCC (+5V)

5

Clock

 

 

6

NC

PS/2 Keyboard

 

 

10

6BXC

CPU FAN : CPU Cooling Fan Power Connector

 

1

Pin

Function

CPU

 

1

GND

 

 

 

 

6BXC

 

2

+12V

Intel

 

3

SENSE

440BX

 

 

 

 

 

 

PIIX4

 

 

IDE1: For Primary IDE port

 

CPU

6BXC

Intel

440BX

 

 

PIIX4

 

1

11

Loading...
+ 30 hidden pages