Page 1
easy handling,
adjustable direction and angle
instruction manual
1. separate swivel joint from wall bracket 3. wall mount options
1.a
Loosen lower
bolted assembly
1.b
Gather swivel joint from
wall bracket
2.a
Adjust wall
plate vertically
2.b
Anchor holes drilling (6x)
diameter
-6 mm steel-anchor-bolt
-8 mm universal frame fixing set
2. wall bracket fastening
concrete wall - e.g.: steel-anchor-bolt M 6 x 65 mm
-drill and blow out hole, place anchor, wall bracket and
washer, tighten hexnut
perforated bricks - e.g.: unsiversal frame fixing set 8 x 80 mm
-drill, countersink and blow out hole, place anchor and bracket, fix hexagon
head wood screw
C injection-molded-anchor
without sieve bushing for concrete wall - with sieve bushing for perforated bricks / optional with threaded bolt M6 or threaded bushing M6
Advantages: fixing without pressure, enables repeated mounting, capable for diverse wall materials
Advantages: (please notice instructions of anchor manufacturers).
GENELEC Oy
Olvitie 5, Fin-74100 Iisalmi, www.genelec.com
24478-015-55 Rev.01 03-80-354-00 4/15
WALL MOUNT for GENELEC 8X5X - Series + 8260A - 8260-414B
Page 2
- For GENELEC 8260A, 8351A, 8250A, 8050A
- Use six anchors per wall bracket
- Choose a position and mounting method compliant with local
- building codes and regulations
- For use only by trained installers
- For use only at proper walls with adequate anchors (see 3.)
- Not suitable are fragile walls. Beware of power supply lines and water conduits.
- In case ask an expert.
- Inspect bolted assemblies periodly
- For indoor use only
instruction manual
4. installation
5. settings
6. dimensions safety instructions
4.a
Bolt the monitor
to adaptor plate.
Use four screws
M6 x 14 mm
with washers
Tightening
torques
10 Nm
For horizontally
mounting of the
GENELEC 8251
turn the adaptor
plate
5.a
Continuously adjustable up to 30°,
by fixing the upper bolted assembly
6.a
hole pattern:
127 x 70 mm - M6
5" x 2-3/4" - M6
&
VESA 100 x 100 - M4/5
VESA 3-15/16" x
3-15/16" - M4/5
6.b
Weight: 1.8 kg
5.b
Pivoting attachment
around vertical axis
4.b
Replace swivel joint (with mounted 8260A)
into wall bracket
easy handling,
adjustable direction and angle
WALL MOUNT for GENELEC 8X5X - Series + 8260A - 8260-414B
4.c
Secure swivel joint to the
wall bracket by tightening
lower bolted assembly
Loading...