Genelec 8040-450B, 8050-450B Installation Manual

The wall must be prepared so that the flush

the installation. Pay attention to the following

front of the box must be flush with the final

wall surface (See Figure 1 overleaf).

the axis from the lower edge of the cutout is

the loudspeaker.

the box so that the studs on the subframe are

the guide pins to their holes and pushing the

frame in. The installation is now complete.

The frame has openings covered with felt

These are essential for the functioning of the

that would restrict airflow. No paint or other

treatment that may alter the characteristics

www.genelec.com

Installing the bo x and subchassis

Installing the su bchassis and frame to

the box