GE Healthcare HA 20 Vivo Brochure

HA 20 – Heated Humidier

The HA 20* is an integrated heated humidier,
especially designed for use with the iSleep* and
Vivo* 30/40 devices. To meet increasing demands of
customers regarding comfort and security, the HA 20
has now been further enhanced.

The HA 20 is truly integrated with the iSleep and Vivo 30/40 devices,
both in design and function. When connected to an iSleep or Vivo
30/40 device, all HA 20 operations are set and monitored through
the menu of the device. The HA 20 consists of a heating unit and a
separate water chamber. The water chamber is easy to connect and
to remove through the quick-release handle. No separate power cords
are required because power is provided through the iSleep or Vivo
30/40 device.

What’s new?

The current enhancements help further increase handling comfort and
reducing the risk of water entering the device.

1. A smart water trap has been inserted into the lid to reduce the risk
of water entering the device

2. A clear indication of the maximum water level has been added to
the container

3. A new lling hole is added to facilitate lling the HA 20.

4. A simple leaet with instructions for use is provided in the HA 20
(remove before use).

Now further enhanced!

Please remember to always remove the HA 20 from the device and use
the lling hole to ll it. Do not surpass the maximum indicated water
level and remove / empty the HA 20 before transporting the device.

Part numbers

The part numbers for the HA 20 have remained unchanged:

• 2220XX Complete HA 20 White (where XX is the country code)

• 2230XX Complete HA 20 Silver (where XX is the country code)

• 004861 Water chamber

• Heated humidication

• Accessory to iSleep and Vivo 30/40

• Activated and controlled through the iSleep and Vivo

30/40 device

The HA 20 is operated through
the iSleep/Vivo 30/40 device

• No separate power cable required

• Smart water trap

• Convenient lling hole and clear water indication

• Easy to connect and to remove

• Easy to clean

Technical Specications

Power Supplies

Power supply 10-30 VDC, max 40 W.

Environmental Conditions

Operating temperature 5 to 40ºC (41 to 104ºF)

Storage and transport temperature -20 to +60ºC (-4 to 140ºF)

Ambient pressure range 700 to 1060 mbar

Humidity 10% to 95%, non-condensing

Dimensions

W x H x D 150 x 140 x 100 mm

Weight 425 g

Air outlet 22 mm conical standard connector

Water chamber volume 300 ml

Performance

Gas leakage at max. operating pressure < 5 ml/min

Warm up time for delivered gas temperature Less than 60 minutes to reach the set temperature from starting temperature of 23+/-2ºC

Breas Medical AB reserves the right to make changes to the contents of this Product Specication without any prior notication.

* HA20 and iSleep and Vivo are trademarks of General Electric Company

© 2013 General Electric Company – All rights reserved.
General Electric Company reserves the right to make changes in specications and features shown herein,
or discontinue the product described at any time without notice or obligation. Contact your GE represen­tative for the most current information. GE, the GE Monogram and imagination at work are trademarks of
General Electric Company.

Breas Medical AB · Företagsvägen 1 · SE-435 33 Mölnlycke · Sweden
Phone [phone] · Fax [phone] · [e-mail] · www.breas.com

Date 20130207 DOC1280974