GE VIVID 7 SERVICE MANUAL_SM_FC091194_12 Vivid 7 Vivid 7 Service Manual

GE Healthcare

Vivid 7

Vivid 7 Service Manual

Operating Documentation

Part Number: FC091194

Revision: 12

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Important Precautions

• THIS SERVICE MANUAL IS AVAILABLE IN ENGLISH ONLY.

• IF A CUSTOMER’S SERVICE PROVIDER REQUIRES A LANGUAGE OTHER
THAN ENGLISH, IT IS THE CUSTOMER’S RESPONSIBILITY TO PROVIDE
TRANSLATION SERVICES.

WARNING

(EN)

AVERTISSEMENT

(FR)

• DO NOT ATTEMPT TO SERVICE THE EQUIPMENT UNLESS THIS SERVICE
MANUAL HAS BEEN CONSULTED AND IS UNDERSTOOD.

• FAILURE TO HEED THIS WARNING MAY RESULT IN INJURY TO THE SERVICE
PROVIDER, OPERATOR OR PATIENT FROM ELECTRIC SHOCK, MECHANICAL
OR OTHER HAZARDS.

• CE MANUEL DE MAINTENANCE N’EST DISPONIBLE QU’EN ANGLAIS.

• SI LE TECHNICIEN DU CLIENT A BESOIN DE CE MANUEL DANS UNE AUTRE
LANGUE QUE L’ANGLAIS, C’EST AU CLIENT QU’IL INCOMBE DE LE FAIRE
TRADUIRE.

• NE PAS TENTER D’INTERVENTION SUR LES ÉQUIPEMENTS TANT QUE LE
MANUEL SERVICE N’A PAS ÉTÉ CONSULTÉ ET COMPRIS.

• LE NON-RESPECT DE CET AVERTISSEMENT PEUT ENTRAÎNER CHEZ LE
TECHNICIEN, L’OPÉRATEUR OU LE PATIENT DES BLESSURES DUES À DES
DANGERS ÉLECTRIQUES, MÉCANIQUES OU AUTRES.

WARNUNG

(DE)

• DIESES KUNDENDIENST-HANDBUCH EXISTIERT NUR IN ENGLISCHER
SPRACHE.

• FALLS EIN FREMDER KUNDENDIENST EINE ANDERE SPRACHE BENÖTIGT,
IST ES AUFGABE DES KUNDEN FÜR EINE ENTSPRECHENDE ÜBERSETZUNG
ZU SORGEN.

• VERSUCHEN SIE NICHT, DAS GERÄT ZU REPARIEREN, BEVOR DIESES
KUNDENDIENST-HANDBUCH NICHT ZU RATE GEZOGEN UND VERSTANDEN
WURDE.

• WIRD DIESE WARNUNG NICHT BEACHTET, SO KANN ES ZU VERLETZUNGEN
DES KUNDENDIENSTTECHNIKERS, DES BEDIENERS ODER DES PATIENTEN
DURCH ELEKTRISCHE SCHLÄGE, MECHANISCHE ODER SONSTIGE
GEFAHREN KOMMEN.

- i

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

• ESTE MANUAL DE SERVICIO SÓLO EXISTE EN INGLÉS.

• SI ALGÚN PROVEEDOR DE SERVICIOS AJENO A GEHC SOLICITA UN IDIOMA
QUE NO SEA EL INGLÉS, ES RESPONSABILIDAD DEL CLIENTE OFRECER UN
SERVICIO DE TRADUCCIÓN.

AVISO

(ES)

• NO SE DEBERÁ DAR SERVICIO TÉCNICO AL EQUIPO, SIN HABER
CONSULTADO Y COMPRENDIDO ESTE MANUAL DE SERVICIO.

• LA NO OBSERVANCIA DEL PRESENTE AVISO PUEDE DAR LUGAR A QUE EL
PROVEEDOR DE SERVICIOS, EL OPERADOR O EL PACIENTE SUFRAN
LESIONES PROVOCADAS POR CAUSAS ELÉCTRICAS, MECÁNICAS O DE
OTRA NATURALEZA.

• ESTE MANUAL DE ASSISTÊNCIA TÉCNICA SÓ SE ENCONTRA DISPONÍVEL EM
INGLÊS.

• SE QUALQUER OUTRO SERVIÇO DE ASSISTÊNCIA TÉCNICA, QUE NÃO A
GEHC, SOLICITAR ESTES MANUAIS NOUTRO IDIOMA, É DA

ATENÇÃO

(PT)

RESPONSABILIDADE DO CLIENTE FORNECER OS SERVIÇOS DE TRADUÇÃO.

• NÃO TENTE REPARAR O EQUIPAMENTO SEM TER CONSULTADO E
COMPREENDIDO ESTE MANUAL DE ASSISTÊNCIA TÉCNICA.

• O NÃO CUMPRIMENTO DESTE AVISO PODE POR EM PERIGO A SEGURANÇA
DO TÉCNICO, OPERADOR OU PACIENTE DEVIDO A‘ CHOQUES ELÉTRICOS,
MECÂNICOS OU OUTROS.

AVVERTENZA

(IT)

HOIATUS

(ET)

• IL PRESENTE MANUALE DI MANUTENZIONE È DISPONIBILE SOLTANTO IN
INGLESE.

• SE UN ADDETTO ALLA MANUTENZIONE ESTERNO ALLA GEHC RICHIEDE IL
MANUALE IN UNA LINGUA DIVERSA, IL CLIENTE È TENUTO A PROVVEDERE
DIRETTAMENTE ALLA TRADUZIONE.

• SI PROCEDA ALLA MANUTENZIONE DELL’APPARECCHIATURA SOLO DOPO
AVER CONSULTATO IL PRESENTE MANUALE ED AVERNE COMPRESO IL
CONTENUTO.

• NON TENERE CONTO DELLA PRESENTE AVVERTENZA POTREBBE FAR
COMPIERE OPERAZIONI DA CUI DERIVINO LESIONI ALL’ADDETTO ALLA
MANUTENZIONE, ALL’UTILIZZATORE ED AL PAZIENTE PER FOLGORAZIONE
ELETTRICA, PER URTI MECCANICI OD ALTRI RISCHI.

• KÄESOLEV TEENINDUSJUHEND ON SAADAVAL AINULT INGLISE KEELES.

• KUI KLIENDITEENINDUSE OSUTAJA NÕUAB JUHENDIT INGLISE KEELEST
ERINEVAS KEELES, VASTUTAB KLIENT TÕLKETEENUSE OSUTAMISE EEST.

• ÄRGE ÜRITAGE SEADMEID TEENINDADA ENNE EELNEVALT KÄESOLEVA
TEENINDUSJUHENDIGA TUTVUMIST JA SELLEST ARU SAAMIST.

• KÄESOLEVA HOIATUSE EIRAMINE VÕIB PÕHJUSTADA TEENUSEOSUTAJA,
OPERAATORI VÕI PATSIENDI VIGASTAMIST ELEKTRILÖÖGI, MEHAANILISE
VÕI MUU OHU TAGAJÄRJEL.

ii -

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

• TÄMÄ HUOLTO-OHJE ON SAATAVILLA VAIN ENGLANNIKSI.

• JOS ASIAKKAAN PALVELUNTARJOAJA VAATII MUUTA KUIN
ENGLANNINKIELISTÄ MATERIAALIA, TARVITTAVAN KÄÄNNÖKSEN
HANKKIMINEN ON ASIAKKAAN VASTUULLA.

VAROITUS

(FI)

• ÄLÄ YRITÄ KORJATA LAITTEISTOA ENNEN KUIN OLET VARMASTI LUKENUT
JA YMMÄRTÄNYT TÄMÄN HUOLTO-OHJEEN.

• MIKÄLI TÄTÄ VAROITUSTA EI NOUDATETA, SEURAUKSENA VOI OLLA
PALVELUNTARJOAJAN, LAITTEISTON KÄYTTÄJÄN TAI POTILAAN
VAHINGOITTUMINEN SÄHKÖISKUN, MEKAANISEN VIAN TAI MUUN
VAARATILANTEEN VUOKSI.

• ΤΟ ΠΑΡΟΝ ΕΓΧΕΙΡΙΔΙΟ ΣΕΡΒΙΣ ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΑΓΓΛΙΚΑ ΜΟΝΟ.

• ΕΑΝ ΤΟ ΑΤΟΜΟ ΠΑΡΟΧΗΣ ΣΕΡΒΙΣ ΕΝΟΣ ΠΕΛΑΤΗ ΑΠΑΙΤΕΙ ΤΟ ΠΑΡΟΝ

ΕΓΧΕΙΡΙΔΙΟ ΣΕ ΓΛΩΣΣΑ ΕΚΤΟΣ ΤΩΝ ΑΓΓΛΙΚΩΝ, ΑΠΟΤΕΛΕΙ ΕΥΘΥΝΗ ΤΟΥ
ΠΕΛΑΤΗ ΝΑ ΠΑΡΕΧΕΙ ΥΠΗΡΕΣΙΕΣ ΜΕΤΑΦΡΑΣΗΣ.

ΠΡΟΕΙΔΟΠΟΙΗΣΗ

(EL)

• ΜΗΝ ΕΠΙΧΕΙΡΗΣΕΤΕ ΤΗΝ ΕΚΤΕΛΕΣΗ ΕΡΓΑΣΙΩΝ ΣΕΡΒΙΣ ΣΤΟΝ ΕΞΟΠΛΙΣΜΟ
ΕΚΤΟΣ ΕΑΝ ΕΧΕΤΕ ΣΥΜΒΟΥΛΕΥΤΕΙ ΚΑΙ

ΕΧΕΤΕ ΚΑΤΑΝΟΗΣΕΙ ΤΟ ΠΑΡΟΝ

ΕΓΧΕΙΡΙΔΙΟ ΣΕΡΒΙΣ.

• ΕΑΝ ΔΕ ΛΑΒΕΤΕ ΥΠΟΨΗ ΤΗΝ ΠΡΟΕΙΔΟΠΟΙΗΣΗ ΑΥΤΗ, ΕΝΔΕΧΕΤΑΙ ΝΑ

ΠΡΟΚΛΗΘΕΙ ΤΡΑΥΜΑΤΙΣΜΟΣ ΣΤΟ ΑΤΟΜΟ ΠΑΡΟΧΗΣ ΣΕΡΒΙΣ, ΣΤΟ ΧΕΙΡΙΣΤΗ Ή
ΣΤΟΝ ΑΣΘΕΝΗ ΑΠΟ ΗΛΕΚΤΡΟΠΛΗΞΙΑ, ΜΗΧΑΝΙΚΟΥΣ Ή ΑΛΛΟΥΣ ΚΙΝΔΥΝΟΥΣ.

FIGYELMEZTETÉS

(HU)

VIÐVÖRUN

(IS)

• EZEN KARBANTARTÁSI KÉZIKÖNYV KIZÁRÓLAG ANGOL NYELVEN ÉRHETŐ
EL.

• HA A VEVŐ SZOLGÁLTATÓJA ANGOLTÓL ELTÉRŐ NYELVRE TART IGÉNYT,
AKKOR A VEVŐ FELELŐSSÉGE A FORDÍTÁS ELKÉSZÍTTETÉSE.

• NE PRÓBÁLJA ELKEZDENI HASZNÁLNI A BERENDEZÉST, AMÍG A
KARBANTARTÁSI KÉZIKÖNYVBEN LEÍRTAKAT NEM ÉRTELMEZTÉK.

• EZEN FIGYELMEZTETÉS FIGYELMEN KÍVÜL HAGYÁSA A SZOLGÁLTATÓ,
MŰKÖDTETŐ VAGY A BETEG ÁRAMÜTÉS, MECHANIKAI VAGY EGYÉB
VESZÉLYHELYZET MIATTI SÉRÜLÉSÉT EREDMÉNYEZHETI.

• ÞESSI ÞJÓNUSTUHANDBÓK ER EINGÖNGU FÁANLEG Á ENSKU.

• EF ÞJÓNUSTUAÐILI VIÐSKIPTAMANNS ÞARFNAST ANNARS TUNGUMÁLS EN
ENSKU, ER ÞAÐ Á ÁBYRGÐ VIÐSKIPTAMANNS AÐ ÚTVEGA ÞÝÐINGU.

• REYNIÐ EKKI AÐ ÞJÓNUSTA TÆKIÐ NEMA EFTIR AÐ HAFA SKOÐAÐ OG
SKILIÐ ÞESSA ÞJÓNUSTUHANDBÓK.

• EF EKKI ER FARIÐ AÐ ÞESSARI VIÐVÖRUN GETUR ÞAÐ VALDIÐ MEIÐSLUM
ÞJÓNUSTUVEITANDA, STJÓRNANDA EÐA SJÚKLINGS VEGNA RAFLOSTS,
VÉLRÆNNAR EÐA ANNARRAR HÆTTU.

- iii

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

• TENTO SERVISNÍ NÁVOD EXISTUJE POUZE V ANGLICKÉM JAZYCE.

•VPŘÍPADĚ, ŽE POSKYTOVATEL SLUŽEB ZÁKAZNÍKŮM POTŘEBUJE NÁVOD
V JINÉM JAZYCE, JE ZAJIŠTĚNÍ PŘEKLADU DO ODPOVÍDAJÍCÍHO JAZYKA
ÚKOLEM ZÁKAZNÍKA.

• NEPROVÁDĚJTE ÚDRŽBU TOHOTO ZAŘÍZENÍ, ANIŽ BYSTE SI PŘEČETLI

VÝSTRAHA

(CS)

TENTO SERVISNÍ NÁVOD A POCHOPILI JEHO OBSAH.

•VPŘÍPADĚ NEDODRŽOVÁNÍ TÉTO VÝSTRAHY MŮŽE DOJÍT ÚRAZU
ELEKTRICKÁM PROUDEM PRACOVNÍKA POSKYTOVATELE SLUŽEB,
OBSLUŽNÉHO PERSONÁLU NEBO PACIENTŮ VLIVEM ELEKTRICKÉHOP
PROUDU, RESPEKTIVE VLIVEM K RIZIKU MECHANICKÉHO POŠKOZENÍ NEBO
JINÉMU RIZIKU.

• DENNE SERVICEMANUAL FINDES KUN PÅ ENGELSK.

• HVIS EN KUNDES TEKNIKER HAR BRUG FOR ET ANDET SPROG END
ENGELSK, ER DET KUNDENS ANSVAR AT SØRGE FOR OVERSÆTTELSE.

ADVARSEL

(DA)

• FORSØG IKKE AT SERVICERE UDSTYRET MEDMINDRE
DENNE SERVICEMANUAL ER BLEVET LÆST OG FORSTÅET.

• MANGLENDE OVERHOLDELSE AF DENNE ADVARSEL KAN MEDFØRE SKADE
PÅ GRUND AF ELEKTRISK, MEKANISK ELLER ANDEN FARE FOR
TEKNIKEREN, OPERATØREN ELLER PATIENTEN.

WAARSCHUWING

(NL)

BRĪDINĀJUMS

(LV)

• DEZE ONDERHOUDSHANDLEIDING IS ENKEL IN HET ENGELS
VERKRIJGBAAR.

• ALS HET ONDERHOUDSPERSONEEL EEN ANDERE TAAL VEREIST, DAN IS DE
KLANT VERANTWOORDELIJK VOOR DE VERTALING ERVAN.

• PROBEER DE APPARATUUR NIET TE ONDERHOUDEN VOORDAT DEZE
ONDERHOUDSHANDLEIDING WERD GERAADPLEEGD EN BEGREPEN IS.

• INDIEN DEZE WAARSCHUWING NIET WORDT OPGEVOLGD, ZOU HET
ONDERHOUDSPERSONEEL, DE OPERATOR OF EEN PATIËNT GEWOND
KUNNEN RAKEN ALS GEVOLG VAN EEN ELEKTRISCHE SCHOK,
MECHANISCHE OF ANDERE GEVAREN.

•ŠĪ APKALPES ROKASGRĀMATA IR PIEEJAMA TIKAI ANGĻU VALODĀ.

• JA KLIENTA APKALPES SNIEDZĒJAM NEPIECIEŠAMA INFORMĀCIJA CITĀ
VALODĀ, NEVIS ANGĻU, KLIENTA PIENĀKUMS IR NODROŠINĀT TULKOŠANU.

• NEVEICIET APRĪKOJUMA APKALPI BEZ APKALPES ROKASGRĀMATAS
IZLASĪŠANAS UN SAPRAŠANAS.

•ŠĪ BRĪDINĀJUMA NEIEVĒROŠANA VAR RADĪT ELEKTRISK

ĀS STRĀVAS
TRIECIENA, MEHĀNISKU VAI CITU RISKU IZRAISĪTU TRAUMU APKALPES
SNIEDZĒJAM, OPERATORAM VAI PACIENTAM.

iv -

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

• ŠIS EKSPLOATAVIMO VADOVAS YRA IŠLEISTAS TIK ANGLŲ KALBA.

• JEI KLIENTO PASLAUGŲ TEIKĖJUI REIKIA VADOVO KITA KALBA – NE ANGLŲ,
VERTIMU PASIRŪPINTI TURI KLIENTAS.

ĮSPĖJIMAS

(LT)

•NEMĖGINKITE ATLIKTI ĮRANGOS TECHNINĖS PRIEŽIŪROS DARBŲ, NEBENT
VADOVAUTUMĖTĖS ŠIUO EKSPLOATAVIMO VADOVU IR JĮ SUPRASTUMĖTE

• NEPAISANT ŠIO PERSPĖJIMO, PASLAUGŲ TEIKĖJAS, OPERATORIUS AR
PACIENTAS GALI BŪTI SUŽEISTAS DĖL ELEKTROS SMŪGIO, MECHANINIŲ AR
KITŲ PAVOJŲ.

• DENNE SERVICEHÅNDBOKEN FINNES BARE PÅ ENGELSK.

• HVIS KUNDENS SERVICELEVERANDØR TRENGER ET ANNET SPRÅK, ER DET
KUNDENS ANSVAR Å SØRGE FOR OVERSETTELSE.

ADVARSEL

(NO)

• IKKE FORSØK Å REPARERE UTSTYRET UTEN AT DENNE
SERVICEHÅNDBOKEN ER LEST OG FORSTÅTT.

• MANGLENDE HENSYN TIL DENNE ADVARSELEN KAN FØRE TIL AT
SERVICELEVERANDØREN, OPERATØREN ELLER PASIENTEN SKADES PÅ
GRUNN AV ELEKTRISK STØT, MEKANISKE ELLER ANDRE FARER.

OSTRZEŻENIE

(PL)

ATE NŢIE

(RO)

• NINIEJSZY PODRĘCZNIK SERWISOWY DOSTĘPNY JEST JEDYNIE W JĘZYKU
ANGIELSKIM.

•JEŚLI FIRMA ŚWIADCZĄCA KLIENTOWI USłUGI SERWISOWE WYMAGA
UDOSTĘPNIENIA PODRĘCZNIKA W JĘZYKU INNYM NIŻ ANGIELSKI,
OBOWIĄZEK ZAPEWNIENIA STOSOWNEGO TłUMACZENIA SPOCZYWA NA
KLIENCIE.

• NIE PRÓBOWAĆ SERWISOWAĆ NINIEJSZEGO SPRZĘTU BEZ UPRZEDNIEGO
ZAPOZNANIA SI

Ę Z PODRĘCZNIKIEM SERWISOWYM.

• NIEZASTOSOWANIE SIĘ DO TEGO OSTRZEŻENIA MOżE GROZIĆ
OBRAŻENIAMI CIAłA SERWISANTA, OPERATORA LUB PACJENTA W WYNIKU
PORAŻENIA PRĄDEM, URAZU MECHANICZNEGO LUB INNEGO RODZAJU
ZAGROŻEŃ.

• ACEST MANUAL DE SERVICE ESTE DISPONIBIL NUMAI ÎN LIMBA ENGLEZĂ.

• DACĂ UN FURNIZOR DE SERVICII PENTRU CLIENŢI NECESITĂ O ALTĂ LIMBĂ
DECÂT CEA ENGLEZĂ, ESTE DE DATORIA CLIENTULUI SĂ FURNIZEZE O
TRADUCERE.

• NU ÎNCERCAŢI SĂ REPARAŢI ECHIPAMENTUL DECÂT ULTERIOR
CONSULTĂRII ŞI ÎNŢELEGERII ACESTUI MANUAL DE SERVICE.

• IGNORAREA ACESTUI AVERTISMENT AR PUTEA DUCE LA RĂNIREA
DEPANATORULUI, OPERATORULUI SAU PACIENTULUI ÎN URMA
PERICOLELOR DE ELECTROCUTARE, MECANICE SAU DE ALTĂ NATURĂ.

- v

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

• ДАННОЕ РУКОВОДСТВО ПО ОБСЛУЖИВАНИЮ ПРЕДОСТАВЛЯЕТСЯ
ТОЛЬКО НА АНГЛИЙСКОМ ЯЗЫКЕ.

• ЕСЛИ СЕРВИСНОМУ ПЕРСОНАЛУ КЛИЕНТА НЕОБХОДИМО РУКОВОДСТВО

НЕ НА АНГЛИЙСКОМ ЯЗЫКЕ, КЛИЕНТУ СЛЕДУЕТ САМОСТОЯТЕЛЬНО
ОБЕСПЕЧИТЬ ПЕРЕВОД.

ОСТОРОЖНО!

(RU)

• ПЕРЕД ОБСЛУЖИВАНИЕМ ОБОРУДОВАНИЯ ОБЯЗАТЕЛЬНО ОБРАТИТЕСЬ
К ДАННОМУ РУКОВОДСТВУ И ПОЙМИТЕ ИЗЛОЖЕННЫЕ В НЕМ СВЕДЕНИЯ.

• НЕСОБЛЮДЕНИЕ УКАЗАННЫХ ТРЕБОВАНИЙ МОЖЕТ ПРИВЕСТИ К ТОМУ,
ЧТО СПЕЦИАЛИСТ ПО ТЕХОБСЛУЖИВАНИЮ

, ОПЕРАТОР ИЛИ ПАЦИЕНТ

ПОЛУЧАТ УДАР ЗЛЕКТРИЧЕСКИМ ТОКОМ, МЕХАНИЧЕСКУЮ ТРАВМУ ИЛИ
ДРУГОЕ ПОВРЕЖДЕНИЕ.

• TÁTO SERVISNÁ PRÍRUČKA JE K DISPOZÍCII LEN V ANGLIČTINE.

• AK ZÁKAZNÍKOV POSKYTOVATEĽ SLUŽIEB VYŽADUJE INÝ JAZYK AKO
ANGLIČTINU, POSKYTNUTIE PREKLADATEĽSKÝCH SLUŽIEB JE
ZODPOVEDNOSŤOU ZÁKAZNÍKA.

UPOZORNENIE

(SK)

• NEPOKÚŠAJTE SA VYKONÁVAŤ SERVIS ZARIADENIA SKÔR, AKO SI
NEPREČÍTATE SERVISNÚ PRÍRUČKU A NEPOROZUMIETE JEJ.

• ZANEDBANIE TOHTO UPOZORNENIA MÔŽE VYÚSTIŤ DO ZRANENIA
POSKYTOVATEĽA SLUŽIEB, OBSLUHUJÚCEJ OSOBY ALEBO PACIENTA
ELEKTRICKÝM PRÚDOM, PRÍPADNE DO MECHANICKÉHO ALEBO INÉHO
NEBEZPEČENSTVA.

VARNING

(SV)

DİKKAT

(TR)

• DEN HÄR SERVICEHANDBOKEN FINNS BARA TILLGÄNGLIG PÅ ENGELSKA.

• OM EN KUNDS SERVICETEKNIKER HAR BEHOV AV ETT ANNAT SPRÅK ÄN
ENGELSKA ANSVARAR KUNDEN FÖR ATT TILLHANDAHÅLLA
ÖVERSÄTTNINGSTJÄNSTER.

• FÖRSÖK INTE UTFÖRA SERVICE PÅ UTRUSTNINGEN OM DU INTE HAR LÄST
OCH FÖRSTÅR DEN HÄR SERVICEHANDBOKEN.

• OM DU INTE TAR HÄNSYN TILL DEN HÄR VARNINGEN KAN DET RESULTERA I
SKADOR PÅ SERVICETEKNIKERN, OPERATÖREN ELLER PATIENTEN TILL
FÖLJD AV ELEKTRISKA STÖTAR, MEKANISKA FAROR ELLER ANDRA FAROR.

• BU SERVİS KILAVUZU YALNIZCA İNGİLİZCE OLARAK SAĞLANMIŞTIR.

•EĞER MÜŞTERİ TEKNİSYENİ KILAVUZUN İNGİLİZCE DIŞINDAKİ Bİ

R DİLDE
OLMASINI İSTERSE, KILAVUZU TERCÜME ETTİRMEK MÜŞTERİNİN
SORUMLULUĞUNDADIR.

•SERVİS KILAVUZUNU OKUYUP ANLAMADAN EKİPMANLARA MÜDAHALE
ETMEYİNİZ.

• BU UYARININ GÖZ ARDI EDİLMESİ, ELEKTRİK ÇARPMASI YA DA MEKANİK
VEYA DİĞER TÜRDEN KAZALAR SONUCUNDA TEKNİSYENİN, OPERATÖRÜN
YA DA HASTANIN YARALANMASINA YOL AÇABİLİR.

vi -

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

(JA)

(ZH-CN)

(KO)

- vii

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

DAMAGE IN TRANSPORTATION

All packages should be closely examined at time of delivery. If damage is apparent write “Damage In
Shipment” on ALL copies of the freight or express bill BEFORE delivery is accepted or “signed for” by
a GE representative or hospital receiving agent. Whether noted or concealed, damage MUST be
reported to the carrier immediately upon discovery, or in any event, within 14 days after receipt, and the
contents and containers held for inspection by the carrier. A transportation company will not pay a claim
for damage if an inspection is not requested within this 14 day period.

CERTIFIED ELECTRICAL CONTRACTOR STATEMENT - FOR USA ONLY

All electrical Installations that are preliminary to position ing of the equipment at the site prepared for the
equipment shall be performed by licensed electrical contractors. Othe r conn ections between pieces o f
electrical equipment, calibrations and testing sha ll be performed by q ualified GE Healthcare person nel.
In performing all electrical work on these products, GE will use its own specially trained field engineers.
All of GE’s electrical work on these products will comply with the requirements of the applicable
electrical codes.

The purchaser of GE equipment shall only utilize qualified personnel (i.e., GE’s field engineers,
personnel of third-party service companies with equivalent training, or licensed electricians) to perform
electrical servicing on the equipment.

OMISSIONS & ERRORS

If there are any omissions, errors or suggestions for improving this documentation, please contact the
GE Healthcare Global Documentation Group with specific information listing the system type, manual
title, part number, revision number, page number and suggestion details. Mail the information to:
Service Documentation, 9900 Innovation Drive (RP-2123), Wauwatosa, WI 53226, USA.

GE Healthcare employees should use the iTrak System to report all documentation e rrors or omissions.

SERVICE SAFETY CONSIDERATIONS

DANGER

DANGEROUS VOLTAGES, CAPABLE OF CAUSING DEATH, ARE PRESENT IN
THIS EQUIPMENT. USE EXTREME CAUTION WHEN HANDLING, TESTING AND
ADJUSTING.

WARNINGWARNING

Use all Personal Protection Equipment (PPE) such as gloves, safety shoes, safety
glasses, and kneeling pad, to reduce the risk of injury.

For a complete review of all safety requirements, see the Chapter 1, Safety Considerations section in
the Service Manual.

viii -

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

LEGAL NOTES

The contents of this publication may not be copied or duplicated in any form, in whole or in part, without
prior written permission of GE Healthcare.

GE Healthcare may revise this publication from time to time without written notice.

TRADEMARKS

All products and their name brands are trademarks of their respective holders.

COPYRIGHTS

All Material Copyright© 2002 - 2008 by General Electric Company Inc. All Rights Reserved.

- ix

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Revision History

REVISION DATE REASON FOR CHANGE

01 11. JUN. 2002

02 30. AUG. 2002
03 6. JUN. 2003
04 27. OCT. 2003
05 13. SEP. 2004

6 21. FEB. 2005

7 17. AUG. 2005
8 22. NOV. 2005

9 3. MAY 2006
10 30. NOV. 2006
11 09. OCT. 2007

12 07. APR. 2008

Covers both Vivid 7 and Vivid 7 PRO
Replaces Vivid 7 Service Manual, Part Number FB091202

Updated per BT02-M4 release. Included description for BEP-2.
Updated per BT03-M3 release (software version V 3.0.x).
Updated per RFI release (software version V 3.2.x).
Updated per BT’04-M3 release (software version V4.0.0)

- Removed WLAN from manual. Was removed from product’s spec after the M3 manual was released.

- Added Vivid 7 model for Brazil.
Updated per BT’05-M3 release (software version v5.0.0)
Updated per BT’05-M4 release (software version v5.1.0)
Updated per BT’06-M3 release (software version v6.0.0)
Updated per software version v6.1.0 release
Updated per BT’08 Release (Software version v7.0.0)

Updated due to new/changed service parts. Corrected errors and updated content.

List of Effected Pages

Pages Revision Pages Revision Pages Revision

Title Page 12 4-1 to 4-82 12 9-1 to 9-116 12

Warnings

i to -x
1-1 to 1-76 12 6-1 to 6-14 12 Back Cover N/A
2-1 to 2-14 12 7-1 to 7-76 12

3-1 to 3-136 12 8-1 to 8-108 12

12 5-1 to 5-154 12 10-1 to 10-30 12

x -

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Table of Contents

CHAPTER 1

Introduction

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1

Purpose of Chapter 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1

Contents in Chapter 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1

Purpose of Service Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1

Service Manual Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 2

Contents in this Service Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 2

Typical Users of the Service Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 3

Vivid 7 Models Covered by this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 3

Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 6

Important Conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 9

Conventions Used in Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 9

Standard Hazard Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 10

Product Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 11

Safety Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 15

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 15

Human Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 16

Mechanical Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 17

Electrical Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 19

Labels Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 20

Labels on Front of Monitor and Operator Panel . . . . . . . . . . . . . . . . . . . . . . 1 - 20

Labels on Front of LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 22

Labels on Rear of LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 22

Labels on Front Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 24

Labels Near Connectors on Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 25

Label on External I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 26

Labels at AC Mains Inlet and Circuit Breaker . . . . . . . . . . . . . . . . . . . . . . . 1 - 27

Label on Rear Cover - Vivid 7 Dimension . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 29

Label on Rear Cover - Vivid 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 32

Label on Rear Cover - Vivid 7 PRO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 34

Label on Rear Cover - Vivid 7 Dimension for China . . . . . . . . . . . . . . . . . . 1 - 37

Label on Rear Cover - Vivid 7 for China . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 41

Label on Rear Cover - Vivid 7 PRO for China . . . . . . . . . . . . . . . . . . . . . . . 1 - 42

Table of Contents xi

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Label on Rear Cover - Vivid 7 Dimension for Korea . . . . . . . . . . . . . . . . . . 1 - 46

Label on Rear Cover - Vivid 7 PRO for Korea . . . . . . . . . . . . . . . . . . . . . . . 1 - 47

Label on Rear Cover - Vivid 7 - Details Descriptions . . . . . . . . . . . . . . . . . . 1 - 48

Labels on Internal I/O (Inside Scanner) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 50

Labels on Internal I/O (Inside Scanner) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 51

Label, Internal Connections (Int.Conn.) . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 54

Label, Internal Connections (Int.Conn.) . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 55

Label, BEP1, Internal Connections (Int.Conn.) . . . . . . . . . . . . . . . . . . . . . . 1 - 56

Label, BEP2, Internal Connections (Int.Conn.) . . . . . . . . . . . . . . . . . . . . . . 1 - 57

Label, BEP4 as BEP2 Replacement, Internal Connections (Int.Conn.) . . . . 1 - 58

Label, BEP2.2, Internal Connections (Int.Conn.) . . . . . . . . . . . . . . . . . . . . . 1 - 59

Label, BEP4 as BEP2.2 Replacement, Internal Connections (Int.Conn.) . . 1 - 60

Label, BEP3.x, Internal Connections (Int.Conn.) . . . . . . . . . . . . . . . . . . . . . 1 - 61

Label, BEP3.x with 4D, Internal Connections (Int.Conn.) . . . . . . . . . . . . . . 1 - 62

Label, BEP4.x, Internal Connections (Int.Conn.) . . . . . . . . . . . . . . . . . . . . . 1 - 63

Label, BEP4.x with 4D, Internal Connections (Int.Conn.) . . . . . . . . . . . . . . 1 - 64

Label, Disassembly Nester, Part 1 (Left Part of Label) . . . . . . . . . . . . . . . . 1 - 65

Label, Disassembly Nester, Part 2 (Right Part of Label) . . . . . . . . . . . . . . . 1 - 68

Dangerous Procedure Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 71

Lockout/Tagout (LOTO) Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 72

Returning/Shipping Probes and Repair Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 72

Electromagnetic Compatibility (EMC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 73

What is EMC? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 73

Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 73

Electrostatic Discharge (ESD) Prevention . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 73

Customer Assistance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 74

Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 74

System Manufacturer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 75

xii -

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

CHAPTER 2

Site Preparations

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1

Purpose of Chapter 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1

Contents in Chapter 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1

General Console Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 2

Console Environmental Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 2

Electrical Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3

EMI Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 6

Probes Environmental Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 9

Time and Manpower Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 9

Facility Needs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 10

Purchaser Responsibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 10

Required Facility Needs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 11

Desirable Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 12

Minimal Floor Plan Suggestion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 12

Networking Setup Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 13

- xiii

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

CHAPTER 3

System Setup

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1

Purpose of Chapter 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1

Contents in Chapter 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1

Installation Reminders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 2

Average Installation Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 2

Installation Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 2

Receiving and Unpacking the Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 4

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 4

The Post Delivery Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 5

The Tilt & Shock Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 6

Receiving the Vivid 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 7

Unpacking Vivid 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 10

Packing Materials - Recycling Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 13

Preparing for Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 14

Physical Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 14

EMI Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 14

Completing the Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 14

System Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 14

Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 15

Connections on the External IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 18

Connections on the Patient I/O Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 19

Probe Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 20

Power ON/Bootup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 22

Switching OFF the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 26

.

Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 27

Vivid 7 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 27

Service Screen Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 32

Optional Peripherals/Peripheral Connection . . . . . . . . . . . . . . . . . . . . . . . . 3 - 35

Available Probes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 37

Video Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 37

Software Options Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 38

Connectivity Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 40

Physical Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 40

xiv -

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Connectivity Setup - Software v7.x (BT’08), v6.x, v5.x and v4.x . . . . . . . . . . . . . . 3 - 41

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 41

Contents in this Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 41

Vivid 7 Compatibility - Software Version v7.x, v6.x, v5.x and v4.x . . . . . . . 3 - 42

Select TCP/IP Set-up Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 43

Changing the Computer Name, AE Title and/or Port Number (Port No.) . . 3 - 44
Set the Scanner’s Network Information - S/W v4.2/v5.2/v6.1/v7.x and later 3 - 47
Set the Scanner’s Network Information - S/W v4.0/v4.1/v5.0/v5.1/v6.0 . . . 3 - 49

Advanced Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 50

DHCP Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 51

Set the Remote Archive’s Network Information . . . . . . . . . . . . . . . . . . . . . 3 - 54

Save the New Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 54

Set Up Connection to a DICOM Server in a Network . . . . . . . . . . . . . . . . . 3 - 55

Export Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 67

Create a New Dataflow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 72

Query/Retrieve (Q/R) Setup for Software v7.x/v6.x/v5.x/v4.x . . . . . . . . . . . 3 - 75

Mapping of Parameters from Vivid 7 to DICOM . . . . . . . . . . . . . . . . . . . . . 3 - 82

Connectivity Setup - Software v3.x. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 86

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 86

Contents in this Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 86

Vivid 7 Compatibility - Software version v3.3.x . . . . . . . . . . . . . . . . . . . . . . 3 - 86

Select TCP/IP Set-up Screen - Software Version v3.x . . . . . . . . . . . . . . . . 3 - 87

Set the Scanner’s Network Information - Software Version v3.x . . . . . . . . 3 - 88

Set the Remote Archive’s Network Information - Software Version v3.x . . 3 - 89

Save the New Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 89

Connect to a DICOM Server in a Network - Software Version v3.x . . . . . . 3 - 90

HL7 Communication Setup - Software v3.x . . . . . . . . . . . . . . . . . . . . . . . . 3 - 95

Query/Retrieve (Q/R) Setup for Software v3.x . . . . . . . . . . . . . . . . . . . . . . 3 - 99

Connectivity Setup - Software v2.x. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 106

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 106

Contents in this Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 106

Vivid 7 Compatibility - Software Version v2.4.x . . . . . . . . . . . . . . . . . . . . . 3 - 106

Select TCP/IP Set-up Screen - Software v2.x . . . . . . . . . . . . . . . . . . . . . . 3 - 107

Set the Scanner’s Network Information - Software Version v2.x . . . . . . . . 3 - 109

Set the Remote Archive’s Network Information - Software v2.x . . . . . . . . . 3 - 110

Save the New Settings - Software v2.x . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 110

Verification of a Connection Set Up to EchoPAC PC - Software v2.x . . . . 3 - 111

HL7 Communication Setup for Software v2.x . . . . . . . . . . . . . . . . . . . . . . . 3 - 119

Set Up Connection to a DICOM Server in a Network - Software v2.x . . . . 3 - 123

- xv

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Ethernet Switch / Hub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 130

Local Network Connection to EchoPAC PC Workstation . . . . . . . . . . . . . . . 3 - 131

Hospital Network Connection to EchoPAC PC Workstation . . . . . . . . . . . . 3 - 132

Installation Paperwork . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 133

User’s Manual(s) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 133

Product Locator Installation Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 134

Post Delivery Check List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 135

xvi -

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

CHAPTER 4

Functional Checks

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1

Purpose of Chapter 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1

Contents in Chapter 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1

Special Equipment Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1

General Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 2

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 2

Power ON/ Boot UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 3

Power Shut Down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 7

Log On to the System as ‘ADM’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 11

Using Removable Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 13

Labeling Removable Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 15

Formatting Removable Media - Software Version v3.x and above . . . . . . . 4 - 16

Formatting Removable Media - Software Version v2.x . . . . . . . . . . . . . . . 4 - 17

Verifying Removable Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 17

Archiving and Loading Presets - Software Version v2.x/v3.x . . . . . . . . . . . 4 - 18

Space Management - Software version v7.x/v6.x/v5.x/v4.x . . . . . . . . . . . . 4 - 20

Backup - Software Version v7.x/v6.x/v5.x/v4.x . . . . . . . . . . . . . . . . . . . . . . 4 - 22

Moving and Transporting the Vivid 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 25

Functional Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 27

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 27

Contents in this Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 27

Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 27

Basic Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 28

Performance Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 30

2D Mode (B mode) Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 31

M Mode Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 38

Color Mode Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 42

Doppler Mode Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 48

4D Volume Rendering Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 54

Tissue Velocity Imaging (TVI) Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 56

Contrast Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 62

Stress Echo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 62

Measurements and Multi Image Checks . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 63

Multi Image Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 65

Probe/Connectors Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 66

ECG Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 67

Cineloop Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 68

- xvii

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Back-End Processor Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 72

Peripheral Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 73

Mechanical Functions Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 77

Application Turnover Check List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 81

Software Configuration Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 81

Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 81

Power Supply Test Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 81

Site Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 81

xviii -

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

CHAPTER 5

Components and Functions (Theory)

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 1

Purpose of Chapter 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 1

Contents in Chapter 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 1

General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 2

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 2

Signal Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 3

System Configuration and Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 3

Operator Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 3

The Electronics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 3

Block Diagram - Units with Front-End Card Cage, version 1 (FEP1) . . . . . 5 - 4

Block Diagram - Units with Front-End Card Cage, version 2 (FEP2) . . . . . 5 - 5

Front-End Processor (FEP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 6

General Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 6

FEP1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 6

FEP2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 7

FEP’s Location in the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 8

Input Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 8

Bidirectional Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 8

Output Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 8

Fuses, Jumpers, Dip-switches and LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 8

Transmitter and Receiver Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 9

Transmitter Board, TX128-5 (version introduced for BT’05) . . . . . . . . . . . . 5 - 14

Transmitter Board, TX128 (version used before BT’05) . . . . . . . . . . . . . . . 5 - 19

Transducer Bus Boards, XD BUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 24

Relay Board (RLY) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 26

Receiver Board, RX-128 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 29

Beam Former Board(s), BF-64 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 33

Front-End Controller Board, FEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 37

Digital Signal Processors Subsystem In Units with FEP1 . . . . . . . . . . . . . 5 - 45

RF & Tissue Processor Board, RFT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 47

Spectrum Doppler Processor Board, SDP . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 51

Image Port (IMP) Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 56

Radio Frequency Interface Board, RFI . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 61

Motherboard (Backplane) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 72

Back-End Processor (BEP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 73

BEP Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 73

- xix

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 74

Signal Flow and Processing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 74

Location of the Back-End Processor (BEP) . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 75

Back-End Processor (BEP) Block Diagrams . . . . . . . . . . . . . . . . . . . . . . . . 5 - 76

Back-End Processor (BEP) Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 88

Internal Storage Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 95

Back-End Processor (BEP) Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 95

Back-End Processor (BEP) Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 97

UPS Battery Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 98

Patient I/O (Physio) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 100

Patient I/O General Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 100

Patient I/O Location in the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 101

Patient I/O - Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 102

Patient I/O - Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 102

Internal I/O. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 103

General Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 103

Internal I/O - Location in the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 106

Input Signals to Internal I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 107

Output Signals from the Internal I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 110

LEDs on Internal I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 112

Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 112

Jumpers and Dip-switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 112

Top Console with Monitor and Operator Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 113

General Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 113

Monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 115

Operator Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 116

External I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 117

General Description, External I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 117

Location in the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 118

Input Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 119

Bi-directional Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 120

Output Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 120

Reset Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 121

Jumpers and Dip-switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 121

LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 121

Video Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 122

Peripherals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 123

Internal Peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 123

xx -

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

External Peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 123

Modem (Option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 124

General Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 124

Location in the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 124

Modem (Option) Inputs/Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 125

Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 125

Jumpers and Dip-switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 125

LEDs on Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 126

Power Distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 127

Overall AC Power Distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 127

AC Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 129

DC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 133

TX Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 137

Mechanical Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 141

General Description, Top Console on Vivid 7 . . . . . . . . . . . . . . . . . . . . . . . 5 - 141

Transporting Vivid 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 142

Location in the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 143

General Description, Top Console on Vivid 7 PRO . . . . . . . . . . . . . . . . . . 5 - 145

Location in the Unit Vivid 7 PRO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 145

Air Flow Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 146

General Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 146

Location in the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 146

Software Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 147

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 147

System Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 147

Application Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 147

Software Patches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 147

Service Platform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 147

Connectivity Theory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 148

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 148

The Dataflow Concept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 148

New Dataflows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 149

Dataflow Naming Convention . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 149

Dataflow Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 150

Stand-alone Vivid 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 151

“Sneaker Net” Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 151

Direct Connection from Vivid 7 to an EchoPAC PC Workstation . . . . . . . . 5 - 151

- xxi

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Vivid 7 and a DICOM Server in a Network . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 151

Product Manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 151

Service Platform. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 152

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 152

iLinq Interactive Platform Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 152

Global Service User Interface (GSUI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 153

System Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 154

Restart Vivid 7 After Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 154

xxii -

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

CHAPTER 6

Service Adjustments

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 1

Purpose of this Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 1

Contents in this Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 1

Date and Time Adjustments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 1

Daylight Saving Time (DST) Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 2

Vivid 7 - software v2.x and v3.x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 2

To check or set the system time (v4.x and higher) . . . . . . . . . . . . . . . . . . . 6 - 2

Power Supply Adjustments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 2

Cautions and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 2

Access to Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 3

CRT Monitor Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 4

Cautions and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 4

Access to Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 4

Degaussing the CRT Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 4

Adjusting the CRT’s Contrast and Brightness . . . . . . . . . . . . . . . . . . . . . . 6 - 5

Front-End Alignment Procedure (Beamformer Calibration) . . . . . . . . . . . . . . . . . . 6 - 7

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 7

When to Use this Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 7

Front-End Alignment Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 8

Direction Lock and Brake Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 10

Front Caster Brakes Adjustment Procedure . . . . . . . . . . . . . . . . . . . . . . . . 6 - 10

Direction Lock Adjustment Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 11

Rear Brakes Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 13

- xxiii

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

CHAPTER 7

Diagnostics/Troubleshooting

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 1

Purpose of this Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 1

Contents in this Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 1

Service Tools Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 2

Service Software Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 2

Special Service Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 2

Frequently Asked Questions - FAQ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 3

Error Message(s) During Start Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 3

Service Safety Considerations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 4

Gathering Troubleshooting Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 5

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 5

Collect Vital System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 5

Collect a Trouble Image with Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 6

Diagnostics Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 7

Diagnostic Procedure Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 7

Common Service Diagnostic Interface (GSUI) . . . . . . . . . . . . . . . . . . . . . . . 7 - 8

Service Home Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 9

Error Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 11

Diagnostics Screen Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 26

Image Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 32

Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 33

Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 35

Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 36

Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 46

PM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 47

Home . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 47

Exit From Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 47

Common Diagnostics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 48

Common Diagnostics - Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 49

PC (Back-End Processor) Diagnostics, Non-Interactive Tests . . . . . . . . . . 7 - 51

PC (Back-End Processor) Diagnostics, Interactive Tests . . . . . . . . . . . . . . 7 - 57

Acquisition Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 63

Acquisition Diagnostics Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 63

xxiv -

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Calibration Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 64

System Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 66

,General Recommendations to Troubleshoot Noise Issues . . . . . . . . . . . . 7 - 74

EMI Prevention/abatement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 75

- xxv

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

CHAPTER 8

Replacement Procedures

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 1

Purpose of Chapter 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 1

Definitions of Left, Right, Front and Back . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 2

Returning/Shipping Probes and Repair Parts . . . . . . . . . . . . . . . . . . . . . . . 8 - 3

Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 3

Side Covers (with Bumpers) Replacement Procedure . . . . . . . . . . . . . . . . . . . . . . 8 - 4

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 4

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 4

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 4

Side Covers Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 4

Side Covers Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 5

Verification - Functional Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 5

Upper Rear Cover (Filter Cover) Replacement Procedure . . . . . . . . . . . . . . . . . . . 8 - 6

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 6

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 6

Upper Rear Cover Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 6

Upper Rear Cover Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 6

Verification - Functional Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 6

Front Cover Replacement Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 7

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 7

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 7

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 7

Front Cover Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 7

Front Cover Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 7

Verification - Functional Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 7

Air Filter Replacement Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 8

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 8

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 8

Filter Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 8

Filter Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 8

Verification - Functional Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 8

Lower Rear Cover Replacements Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 9

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 9

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 9

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 9

xxvi -

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Lower Rear Cover Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 9

Lower Rear Cover Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 9

Verification - Functional Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 10

Software Loading Procedure - Software Version v7.x, v6.x, v5.x and v4.x . . . . . . 8 - 13

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 13

Preparations Before Software Re-installation . . . . . . . . . . . . . . . . . . . . . . . 8 - 13

Customer Provided Prerequisite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 14

Tools Provided With Unit or After an Upgrade . . . . . . . . . . . . . . . . . . . . . . 8 - 14

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 15

Move Images - Software Version v7.x/v6.x/v5.x/v4.x . . . . . . . . . . . . . . . . . 8 - 16

Backup - Software Version v7.x/v6.x/v5.x/v4.x . . . . . . . . . . . . . . . . . . . . . . 8 - 18

Record SW Option Keys - Software Version v7.x/v6.x/v5.x/v4.x . . . . . . . . 8 - 21

Record TCP/IP Settings - Software Version v7.x/v6.x/v5.x/v4.x . . . . . . . . . 8 - 22

Record Service Settings - Software Version v7.x/v6.x/v5.x/v4.x . . . . . . . . 8 - 23

Record Software Versions - Software Version v7.x/v6.x/v5.x/v4.x . . . . . . . 8 - 24

Software Loading - Software Version v7.x/v6.x/v5.x/v4.x . . . . . . . . . . . . . . 8 - 25

Verifications - Software Version v7.x/v6.x/v5.x/v4.x . . . . . . . . . . . . . . . . . . 8 - 34

Restore Patient Archive/System Config. - Software v7.x/v6.x/v5.x/v4.x . . . 8 - 37

Verification - Functional Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 38

Software Loading Procedure - Software Version v3.x . . . . . . . . . . . . . . . . . . . . . . 8 - 39

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 39

Preparations Before Software Re-installation . . . . . . . . . . . . . . . . . . . . . . . 8 - 39

Customer Provided Prerequisite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 40

Tools Provided With Unit or After an Upgrade . . . . . . . . . . . . . . . . . . . . . . 8 - 40

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 40

Backup - Software Version v3.x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 41

Record SW Option Keys - Software v3.x . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 44

Record TCP/IP Settings - Software Version v3.x . . . . . . . . . . . . . . . . . . . . 8 - 45

Record Service Settings - Software Version v3.x . . . . . . . . . . . . . . . . . . . . 8 - 46

Information on the About tab - Software Version v3.x . . . . . . . . . . . . . . . . 8 - 47

Software Loading - Software Version v3.x . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 48

Verifications - Software Version v3.x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 52

Verification - Functional Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 54

Software Loading Procedure - Software Version v2.x . . . . . . . . . . . . . . . . . . . . . . 8 - 55

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 55

Preparations To Be Done Before Software Re-installation . . . . . . . . . . . . . 8 - 55

Customer Provided Prerequisite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 56

Tools Provided With Unit or After a Software Upgrade . . . . . . . . . . . . . . . 8 - 56

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 56

- xxvii

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Prepare MO Disks for Image Storage - Software Version v2.x . . . . . . . . . . 8 - 57

Move Images - Software Version v2.x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 58

Prepare MO Disk for Patient Archive - Software Version v2.x . . . . . . . . . . . 8 - 60

Backup of Patient Database & User Presets - Software Version v2.x . . . . . 8 - 61

Record SW Option Keys - Software Version v2.x . . . . . . . . . . . . . . . . . . . . 8 - 63

Record TCP/IP Settings - Software Version v2.x . . . . . . . . . . . . . . . . . . . . . 8 - 64

Record Default Dataflow - Software Version v2.x . . . . . . . . . . . . . . . . . . . . 8 - 65

Record Standard Printer IP and Port Settings - Software Version v2.x . . . . 8 - 66

Software Loading - Software Version v2.x . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 71

Verifications - Software Version v2.x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 76

Restore Standard Printer IP and Port Settings - Software Version v2.x . . . 8 - 78

Verification - Functional Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 80

BEP Filter Assembly Replacement Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 81

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 81

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 81

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 81

BEP Filter Removel Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 81

BEP Filter Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 81

Verification - Functional Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 82

AC Power Replacement Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 83

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 83

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 83

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 83

AC Power Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 84

AC Power Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 85

Verification - Functional Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 85

DC Power Replacement Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 86

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 86

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 86

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 86

DC Power Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 87

DC Power Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 88

Verification - Functional Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 88

TX Power Replacement Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 89

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 89

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 89

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 89

TX Power Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 90

TX Power Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 90

xxviii -

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Select the Needed USB Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 91

Rear Casters Replacement Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 92

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 92

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 92

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 92

Rear Casters Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 93

Rear Casters Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 95

Front Casters Replacement Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 96

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 96

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 96

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 96

Front Casters Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 97

Front Casters Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 100

Front Bumper Replacement Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 101

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 101

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 101

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 101

Front Bumper Removal Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 101

Front Bumper Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 101

Brake Pedal Replacement Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 102

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 102

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 102

Brake Pedal Replacement Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 102

Direction Lock Pedal Replacement Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 103

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 103

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 103

Direction Lock Replacement Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 103

Brake Pedal and Direction Lock Assembly Replacement Procedures. . . . . . . . . . 8 - 104

Manpower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 104

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 104

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 104

Brake Pedal and Direction Lock Removal Procedure . . . . . . . . . . . . . . . . . 8 - 104

Brake Pedal and Direction Lock Installation Procedure . . . . . . . . . . . . . . . 8 - 105

Verification - Functional Checks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 106

Functional Checks and Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 106

- xxix

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

CHAPTER 9

Renewal Parts

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 1

Purpose of Chapter 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 1

Contents in Chapter 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 1

Definitions of Left, Right, Front and Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 2

List of Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 3

Parts List Groups. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 4

Vivid 7 Models and Hardware/Software Compatibility . . . . . . . . . . . . . . . . . . . . . . . 9 - 7

Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 10

Software Version v7.x (BT’08) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 10

Software Version v6.x (BT’06) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 11

Software Version v5.x (BT’05) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 12

Software Version v4.x (BT’04) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 13

Software Version v3.x (BT’03) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 14

Software Version v2.x (BT’02) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 15

Software Version v1.x (BT’01) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 15

Software Patches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 16

Printer Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 17

Plastic Parts, Console, Top and Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 18

Plastic Parts, Airduct Cover and Cover Boxes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 20

Plastic Parts, External Covers and Bumpers, Left, Right and Rear. . . . . . . . . . . . . 9 - 21

Frogleg and Swivel Arm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 22

Console Lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 23

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 23

Console Lock - VIVID 7/VIVID 7 Dimension . . . . . . . . . . . . . . . . . . . . . . . . 9 - 23

Console Lock - Vivid 7 PRO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 24

Gas Spring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 25

Fan Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 26

Operator Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 27

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 27

xxx -

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Operator Panel–Version 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 28

Operator Panel–Version 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 30

Operator Panel–Version 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 31

Operator Panel–Common Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 33

Monitor Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 34

LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 34

CRT Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 35

Casters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 36

Brake Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 37

Front-End Processor Card Cage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 38

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 38

Hardware/Software Versions, Front-End Processor Version 2 (FEP2) . . . 9 - 38

Front-End Processor Version 2 FRU Parts . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 40

Hardware/Software Versions, Front-End Processor Version 1 . . . . . . . . . . 9 - 42

Front-End Processor Version 1 FRU Parts . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 43

Back-End Processor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 45

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 45

48FRU Parts for Back-End Processor Version 4.3 (BEP4.3) . . . . . . . . . . . 9 - 46

FRU Parts for Back-End Processor Version 4.2 (BEP4.2) . . . . . . . . . . . . . 9 - 48

FRU Parts for BEP 4 as Replacement for BEP 2.2 . . . . . . . . . . . . . . . . . . 9 - 50

FRU Parts for BEP4 as Replacement for BEP2.0 . . . . . . . . . . . . . . . . . . . 9 - 51

FRU Parts for Back-End Processor Version 3.2 (BEP3.2) . . . . . . . . . . . . . 9 - 52

FRU Parts for Back-End Processor Version 3.0 (BEP3.0) . . . . . . . . . . . . . 9 - 54

FRU Parts for Back-End Processor Version 2.2 (BEP2.2) . . . . . . . . . . . . . 9 - 55

FRU Parts for Back-End Processor Version 2 (BEP2) . . . . . . . . . . . . . . . . 9 - 56

FRU Parts for Back-End Processor Version 1 (BEP1) . . . . . . . . . . . . . . . . 9 - 57

AC Power Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 58

Input /Output Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 59

Peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 60

Peripherals Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 60

Printers, Internal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 62

Network Printers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 63

Digital Video Disc Recorder (DVR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 64

Video Cassette Recorders (VCRs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 64

USB Flash Card (USB Drive) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 64

Footswitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 65

- xxxi

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Modem Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 65

Cables - Vivid 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 66

ECG Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 72

Physio TX Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 73

Probes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 74

Contents in this Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 74

Supported Probes and Software Versions - BT’08 . . . . . . . . . . . . . . . . . . . 9 - 74

Supported Probes and Software Versions - BT’06 . . . . . . . . . . . . . . . . . . . 9 - 76

Supported Probes and Software Versions - BT’05 . . . . . . . . . . . . . . . . . . . 9 - 78

Supported Probes and Software Versions - BT’04 . . . . . . . . . . . . . . . . . . . 9 - 80

Supported Probes and Software Versions - BT’01, BT’02 and BT’03 . . . . . 9 - 82

Probe Service Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 84

Other Probe Part(s) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 84

Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 85

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 85

Options - Vivid 7 Dimension/Vivid 7 PRO - BT’08, Software v7.x . . . . . . . . 9 - 86

Options - Vivid 7 Dimension/Vivid 7 PRO - BT’06, Software v6.x . . . . . . . . 9 - 87

Options - Vivid 7 Dimension/Vivid 7 PRO - BT’05, Software v5.x . . . . . . . . 9 - 88

Options - Vivid 7 Dimension/Vivid 7/Vivid 7 PRO - BT’04, Software v4.x . . 9 - 89

Options - Vivid 7/Vivid 7 PRO - BT’03, SW v3.x . . . . . . . . . . . . . . . . . . . . . 9 - 90

Options - Vivid 7/Vivid 7 PRO - BT’02, SW v2.x . . . . . . . . . . . . . . . . . . . . . 9 - 92

Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 93

Service Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 93

Vivid 7 Upgrade Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 94

Language Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 96

Parts List for Bumper Kit, Frogleg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 97

Parts Lists for Column Cover Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 98

Accessory Boxes, Vivid 7 / Vivid 7 PRO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 99

Accessory Box - Delivered with System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 99

Accessory Box - SERVICE V7, US . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 101

Product Manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 102

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 102

Product Manuals for Units with Software v7.x . . . . . . . . . . . . . . . . . . . . . . . 9 - 103

4D Manuals for Units with Software v7.x . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 104

xxxii -

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Product Manuals for Units with Software v6.x . . . . . . . . . . . . . . . . . . . . . . 9 - 106

4D Manuals for Units with Software v6.x . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 107

Product Manuals for Units with v5.x Software . . . . . . . . . . . . . . . . . . . . . . 9 - 108

4D Manuals for Units with Software v5.x . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 109

Product Manuals for Units with Software v4.x . . . . . . . . . . . . . . . . . . . . . . 9 - 110

Product Manuals for 4D/Multiplan Imaging . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 111

Product Manuals for Units with Software Version v3.x . . . . . . . . . . . . . . . . 9 - 112

Product Manuals for Units with Software Version v2.x . . . . . . . . . . . . . . . . 9 - 113

Packing Parts for Reshipment - Vivid 7 with LCD . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 114

Packing Parts for Reshipment - Vivid 7 with CRT . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 115

- xxxiii

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

CHAPTER 10

Care & Maintenance

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 1

Periodic Maintenance Inspections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 1

Purpose of Chapter 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 1

Contents in Chapter 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 1

Important Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 2

Why do Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 2

Keeping Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 2

Quality Assurance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 2

Maintenance Task Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 3

How often should maintenance tasks be performed? . . . . . . . . . . . . . . . . . 10 - 3

Tools Required. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 5

Special Tools, Supplies and Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 5

System Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 6

Preliminary Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 6

Functional Checks (See Also Chapter 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 7

Input Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 8

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 9

Physical Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 11

Optional Diagnostic Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 12

Probe Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 12

Using a Phantom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 13

Electrical Safety Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 13

Safety Test Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 13

GEHC Leakage Current Limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 14

Outlet Test - Wiring Arrangement - USA & Canada . . . . . . . . . . . . . . . . . . . 10 - 15

Grounding Continuity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 15

Chassis Leakage Current Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 17

Isolated Patient Lead (Source) Leakage–Lead to Ground . . . . . . . . . . . . . . 10 - 18

Isolated Patient Lead (Source) Leakage–Lead to Lead . . . . . . . . . . . . . . . . 10 - 19

Isolated Patient Lead (Sink) Leakage-Isolation Test . . . . . . . . . . . . . . . . . . 10 - 20

Probe Leakage Current Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 22

When There's Too Much Leakage Current.... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 25

xxxiv -

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Site Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 28

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Index - 1

- xxxv

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

xxxvi -

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Chapter 1
Introduction

Section 1-1 Overview

1-1-1 Purpose of Chapter 1

This chapter describes important issues related to safely servicing this ultrasound machine. The service
provider must read and understand all the information presented here before installing or servicing a
unit.

1-1-2 Contents in Chapter 1

Table 1-1 Contents in Chapter 1

SECTION DESCRIPTION PAGE NUMBER

1-1
1-2

1-3
1-4
1-5
1-6
1-7
1-8
1-9

1-10

Overview
Service Manual Overview
Important Conventions
Safety Considerations
Labels Locations
Dangerous Procedure Warnings
Lockout/Tagout (LOTO) Requirements
Returning/Shipping Probes and Repair Parts
Electromagnetic Compatibility (EMC)
Customer Assistance

1-1-3 Purpose of Service Manual

This Service Manual provides installation and service information for the Vivid 7 Ultrasound Scanning
unit.

1-1
1-2

1-9
1-15
1-20
1-71
1-72
1-72
1-73
1-74

Chapter 1 - Introduction 1 - 1

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Section 1-2 Service Manual Overview

The service manual provides installation and service information for the Vivid 7 ultrasound scanning
unit. It is divided in 10 chapters as shown below, in Table 1-2 "Contents in this Service Manual" on

page 1-2.

1-2-1 Contents in this Service Manual

The service manual is divided in ten chapters.
In the beginning of the manual, before chapter 1, you will find the language policy for GE Healthcare’s

service documentation, legal information, a revision overview and the Table of Contents (TOC).
An Index has been included after chapter 10.

Table 1-2 Contents in this Service Manual

CHAPTER

NUMBER

1
2 Site Preparations Describes the site requirements for the Vivid 7 ultrasound scanner

3 System Setup Contains unpacking and setup procedures
4 Functional Checks Contains:

5 Components and Functions (Theory) Contains block diagrams and functional explanations of the

6 Service Adjustments Contains instructions on how to make any available adjustments to

7 Diagnostics/Troubleshooting Provides procedures for running and diagnostic or related routines

8 Replacement Procedures Provides disassembly procedures and reassembly procedures for all

9 Renewal Parts Contains a complete list of replacement parts for Vivid 7

10 Care & Maintenance Provides periodic maintenance procedures for Vivid 7

N/A

Introduction Contains content summary and warnings

Index A quick way to the topic you’re looking for

CHAPTER TITLE DESCRIPTION

- general (frequently used) procedures

- functional checks that must be performed as part of the installation,
or as required during servicing and periodic maintenance

- diagnostics

electronics

the Vivid 7

for the Vivid 7

changeable FRU

1 - 2 Section 1-2 - Service Manual Overview

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-2-2 Typical Users of the Service Manual

• Service Personnel (installation, maintenance, etc.)

• Hospital’s Service Personnel

• Architectural Planners/Installation Planners (some parts of Chapter 2, Site Preparations)

1-2-3 Vivid 7 Models Covered by this Manual

Table 1-3 Vivid 7 Models and Hardware/Software Compatibility sheet 1 of 3

APPLICATION

MODEL

NUMBER DESCRIPTION

FRONT-END

PROCESSOR

BACK-END

PROCESSOR

SOFTWARE
VERSION(S)

FD000010
FD000020
FD000120
FD000130
FD000140
FD000150
FD000160
FD000170
FD000180
FD000190
FC000890
FC000900
FC000910
FC000920
FC000930
FC000940
FC000950
FC000960
FC000970
FC000980

VIVID 7 DIMENSION CONSOLE, LCD MONITOR, 230 VAC
VIVID 7 DIMENSION CONSOLE, LCD MONITOR, 100-120 VAC
VIVID 7 PRO CONSOLE, LCD MONITOR, 230 VAC
VIVID 7 PRO CONSOLE, LCD MONITOR, 100-120 VAC
VIVID 7 DIM. W/ MULTI-DIM. & VOLUME, LCD MONITOR, 230 VAC
VIVID 7 DIM. W/ MULTI-DIM. & VOLUME, LCD MONITOR, 100-120 VAC
VIVID 7 DIM. W/ MULTI-DIM. IMAGING, LCD MONITOR, 230 VAC
VIVID 7 DIM. W/ MULTI-DIM. IMAGING, LCD MONITOR, 100-120 VAC
VIVID 7 DIM. W/ VOLUME ULTRASOUND, LCD MONITOR, 230 VAC
VIVID 7 DIM. W/ VOLUME ULTRASOUND, LCD MONITOR,100-120 VAC
VIVID 7 DIMENSION MULTIDIMENSIONAL & Volume (BT’06) 230 VAC
VIVID 7 DIMENSION MULTIDIMENSIONAL & Volume (BT’06) 120 VAC
VIVID 7 DIMENSION (BT’06) 230 VAC
VIVID 7 DIMENSION (BT’06) 100-120 VAC
VIVID 7 PRO (BT’06) 230 VAC
VIVID 7 PRO (BT’06) 100-120 VAC
VIVID 7 DIMENSION MULTIDIMENSIONAL IMAGING (BT’06) 230 VAC
VIVID 7 DIMENSION MULTIDIMENSIONAL IMAGING (BT’06) 120 VAC
VIVID 7 DIMENSION VOLUME ULTRASOUND (BT’06) 230 VAC
VIVID 7 DIMENSION VOLUME ULTRASOUND (BT’06) 120 VAC

FEP2

(RFI)

FEP2

(RFI)

BEP4.2 v7.0

BEP4.2 v6.x

Chapter 1 - Introduction 1 - 3

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Table 1-3 Vivid 7 Models and Hardware/Software Compatibility (cont’d) sheet 2 of 3

APPLICATION

MODEL

NUMBER DESCRIPTION

FRONT-END

PROCESSOR

BACK-END

PROCESSOR

SOFTWARE
VERSION(S)

FC000760

FC000770

FC000780
FC000790
FC000800
FC000810
FC000820
FC000830
FC000840
FC000850
FC000699
FC000660
FC000650
FC000640
FC000630
FC000620
FC000610
FC000440
FC000430
FC000420
FC000410

VIVID 7 DIMENSION, MULTIDIMENSIONAL RENDERING AND VOLUME
(BT’05), 230 VAC

VIVID 7 DIMENSION, MULTIDIMENSIONAL RENDERING AND VOLUME
(BT’05), 120 VAC

VIVID 7 DIMENSION (BT’05), 230 VAC
VIVID 7 DIMENSION (BT’05), 100-120 VAC
VIVID 7 PRO (BT’05), 230 VAC
VIVID 7 PRO (BT’05), 100-120 VAC
VIVID 7 DIMENSION MULTIDIMENSIONAL IMAGING (BT’05), 230 VAC
VIVID 7 DIMENSION MULTIDIMENSIONAL IMAGING (BT’05), 120 VAC
VIVID 7 DIMENSION w/ VOLUME ULTRASOUND (BT’05), 230 VAC
VIVID 7 DIMENSION w/ VOLUME ULTRASOUND (BT’05), 100-120 VAC
VIVID 7 (BT’04), 100-120 VAC
VIVID 7 PRO (BT’04), 100-120 VAC
VIVID 7 PRO (BT’04), 230 VAC
VIVID 7 DIMENSION (BT’04), 100-120 VAC
VIVID 7 DIMENSION (BT’04), 230 VAC
VIVID 7 DIMENSION WITH 3D (BT’04), 100-120 VAC
VIVID 7 DIMENSION WITH 3D (BT’04), 230 VAC
VIVID 7 PRO with RFI, 100-120 VAC
VIVID 7 PRO with RFI, 230 VAC
VIVID 7 with RFI, 100-120 VAC
VIVID 7 with RFI, 230 VAC

FEP2

(RFI)

FEP2

(RFI)

BEP3.2 v5.x

BEP3 v4.x

BEP2.2 v3.2/v3.4

1 - 4 Section 1-2 - Service Manual Overview

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Table 1-3 Vivid 7 Models and Hardware/Software Compatibility (cont’d) sheet 3 of 3

APPLICATION

MODEL

NUMBER DESCRIPTION

FRONT-END

PROCESSOR

BACK-END

PROCESSOR

SOFTWARE
VERSION(S)

FC000340
FC000330
FC000320
FC000310
FC000210
FC000200
FC000190

FC000180

FC000060

FC000030

VIVID 7 PRO (BT’03), 100 - 120 VAC
VIVID 7 PRO (BT’03), 220 - 240 VAC
VIVID 7 (BT’03), 100 - 120 VAC
VIVID 7 (BT’03), 220 - 240 VAC
VIVID 7 (BT’02), 100 - 120 VAC
VIVID 7 (BT’02), 220 - 240 VAC
VIVID 7 PRO (BT’02), 100 - 120 VAC

VIVID 7 PRO (BT’02), 220 - 240 VAC

VIVID 7 (BT’01), 100 - 120 VAC

VIVID 7 (BT’01), 230 VAC

FEP1
(RFT)

BEP2 v3.1/v3.3

- Manufactured

with either BEP1

or BEP2.

- BEP2 may be
used as FRU

- BEP2 phased

into production

from September

2002.

- Manufactured

with

BEP1

- BEP2 may be
used as FRU

NOTE: When not otherwise specified, the contents in this manual applies to all Vivid 7 models.

v2.3/v2.4

Chapter 1 - Introduction 1 - 5

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-2-4 Product Description

1-2-4-1 Overview of the Vivid 7 Ultrasound Scanner

• Vivid 7 is a phased and linear array ultrasound imaging scanner. It also has provisions for analog
input sources like ECG and phono, and a Doppler probe may be connected and used too.

• Real Time 3D (RT 3D) was introduced as an option to VIVID 7 Dimension in 2004 (BT’04).

• The unit can be used for:

- 2D Black and White imaging

- 2D Color Flow

- M-Mode Black and White imaging

- Color M-Mode

- Doppler

- a number of combinations of the above

- Real Time 3D measurements (4D)

• Vivid 7 is a digital beam forming unit and can handle up to 192 element linear probes by use of
multiplexing.

• Signal flow from the Probe Connector Panel to the Front-End, then to the Mid Processors and Back­End Processor and finally to the monitor and peripherals.

• System configuration is stored on a hard disk drive (HDD) and all necessary software is loa ded from
the HDD on power up.

1 - 6 Section 1-2 - Service Manual Overview

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-2-4-1 Overview of the Vivid 7 Ultrasound Scanner (cont’d)

CRT MONITOR.

21” LCD MONITOR

- STANDARD FOR BT’08.

- OPTION FOR BT’06

OPERATOR PANEL

(Discontinued 2007)

UPPER PANEL
WITH STEREO
LOUDSPEAKERS

B/W VIDEO PRINTER

PATIENT I/O

MO DRIVE

DVD or CD DRIVE

Figure 1-1 Vivid 7 Major Components

VCR or DVD
RECORDER

DOPPLER (PEDOF)
CONNECTOR

PROBE CONNECTORS
PARKING SLOT

(UNITS WITHOUT 4D)

BRAKE PEDALS

Chapter 1 - Introduction 1 - 7

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-2-4-2 History - Hardware/Software Versions

The contents in this sub-section has been moved to chapter 9.

• For Front-End Processor Version 2, please refer to: 9-18-2 "Hardware/Software Versions, Front-

End Processor Version 2 (FEP2)" on page 9-38

• For Front-End Processor Version 1, please refer to: 9-18-4 "Hardware/Software Versions, Front-

End Processor Version 1" on page 9-42

1-2-4-3 History - Peripherals/Software Versions

The contents in this sub-section has been moved to chapter 9.
Please refer to:

• 9-22-1 "Peripherals Compatibility" on page 9-60

1-2-4-4 FRUs for Back-End Processor

The contents in this sub-section has been moved to chapter 9.
Please refer to:

• Section 9-19 "Back-End Processor" on page 9-45

1-2-4-5 History - Supported Probes

The contents in this sub-section has been moved to chapter 9.
Please refer to:

• Section 9-26 "Probes" on page 9-74

1-2-4-6 How to Turn the Scanner ON and OFF

Please refer to Chapter 4, section 4-2-2 - Power ON/ Boot UP, for a detailed description of how to turn
the scanner ON and to Chapter 4, s ection 4-2- 3 - Power Shut Down for a detailed description of how to
turn the scanner OFF.

1-2-4-7 How to Check for Hardware/Software Version, Installed Options

To verify the hardware versions on the boards, please refer to the appropriate table:

• "Hardware/Software Versions, Front-End Processor Version 2 (FEP2)" on page 9-38

• "Hardware/Software Versions, Front-End Processor Version 1" on page 9-42

Please refer to "Software Configuration Checks" on page 4-81 to check the software versions on local
software on the boards.

Please refer to "Functional Checks" on page 4-27 to check for installed options.

1-2-4-8 Purpose of Operator Manual(s)

The Operator Manual(s) should be fully read and understood before operating the Vivid 7 and also kept
near the unit for quick reference.

1 - 8 Section 1-2 - Service Manual Overview

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Section 1-3 Important Conventions

1-3-1 Conventions Used in Book

1-3-1-1 Model Designations.

This manual covers the Vivid 7 scanners listed in Table 1-3 on page 1-3.

1-3-1-2 Icons

Pictures, or icons, are used wherever they will reinforce the printed message. The icons, labels and
conventions used on the product and in the service information are described in this chapter.

1-3-1-3 Safety Precaution Messages

Various levels of safety precaution messages may be found on the equipment and in the service
information. The different levels of concern are identified by a flag word that precedes the precautionar y
message. Known or potential hazards to personal are labeled in one of the following ways:

DANGER

Danger is used to indicate the presence of a hazard that will cause severe
personal injury or death if the instructions are ignored.

WARNINGWARNING

CAUTION

NOTICE

NOTE: Notes provide important information about an item or a procedure.

Warning is used to indicate the presence of a hazard that can cause severe personal
injury and property damage if instructions are ignored.

Caution is used to indicate the presence of a hazard that will or can cause minor personal injury
and property damage if instructions are ignored.

Equipment Damage Possible.

Notice is used when a hazard is present that can cause property damage but has absolutely no
personal injury risk.

Example: Disk drive will crash.

Information contained in a NOTE can often save you time or effort.

Chapter 1 - Introduction 1 - 9

GE HEALTHCARE

LIGHT

DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-3-2 Standard Hazard Icons

Important information will always be preceded by the exclamation point contained within a
triangle, as seen throughout this chapte r. In addition to text, several differe nt graphical icons (symbols)

may be used to make you aware of specific types of hazards that could possib ly cause har m. Even if a
symbol isn’t used in this manual, it is included for your reference.

Table 1-4 Standard Hazard Icons

ELECTRICAL MECHANICAL RADIATION

LASER HEAT PINCH

LASER

Some others make you aware of specific procedures that should be followed.

Table 1-5 Standard Icons that indicates that a special procedure is to be used

AVOID STATIC ELECTRICITY TAG AND LOCK OUT WEAR EYE PROTECTION

TAG

&

LOCKOUT

Date

Signed

OR

HAND PROTECTION FOOT PROTECTION

1 - 10 Section 1-3 - Important Conventions

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-3-3 Product Icons

The following table describes the purpose and location of safety labels and other impor tant information
provided on the equipment.

Table 1-6 Product Icons sheet 1 of 4

LABEL/SYMBOL PURPOSE/MEANING LOCATION

Manufacturer's name and address

Identification and Rating Plate

Date of manufacture
Model and serial numbers
Electrical ratings

Rear of console near power inlet

Type/Class Label

IP Code (IPX8/IP68)

Used to indicate the degree of safety or
protection.

Indicates the degree of protection provided
by the enclosure per IEC 529.

IPX8 indicates drip proof and may be used in
an Operating Theater.

The footswitch delivered with Vivid 7 is IP68
rated.

Equipment Type BF (man in the box symbol)
IEC 878-02-03 indicates B Type equipment
having a floating applied part.

Equipment Type CF (heart in the box
symbol) IEC 878-02-05 indicates equipment
having a floating applied part having a
degree of protection suitable for direct
cardiac contact.

DEFIBRILLATOR-PROOF TYPE CF
EQUIPMENT.

Footswitch

Probe connectors including Doppler

probe connector

Probe connectors and ECG connector.
On newer systems also on the rear of

the system.

At the ECG connector on front of
system.

Device Listing/Certification Labels

“CAUTION - This unit weighs...Special

care must be used to avoid...”

“DANGER - Risk of explosion used in...”

Chapter 1 - Introduction 1 - 11

Laboratory logo or labels denoting
conformance with industry safety standards
such as UL or IEC.

This precaution is intended to prevent injury
that may result if one person attempt to move
the unit considerable distances or on an
incline due to the weight of the unit.

The system is not designed for use with
flammable anesthetic gases.

The system is not designed for use with
flammable anesthetic gases.

Rear of console

On the console where easily seen

during transport

Rear of console

Rear of console

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Table 1-6 Product Icons (cont’d) sheet 2 of 4

LABEL/SYMBOL PURPOSE/MEANING LOCATION

Please refer to the Recycling instructions on
the label located outside the Front End Card

Vivid 7 SCANNERS PRODUCED

AFTER SEPTEMBER 2004:

Vivid 7 SCANNERS PRODUCED

BEFORE SEPTEMBER 2004:

Rack’s Cover (Inside the unit),

see Figure 1-20 on page 1-67

and Figure 1-23 on page 1-70.

Vivid 7 SCANNERS PRODUCED AFTER

SEPTEMBER 2004:

“TESTED AND PRODUCTION
MONITORED BY TUV PRODUCT
SERVICE NRTL WITH RESPECT TO
ELECTRICAL SHOCK, FIRE AND
MECHANICAL HAZARDS ONLY IN
ACCORDANCE WITH UL2601-1 AND CAN/
CSA C22.2 NO.601.1”

Products produced before September 2004
will bear the c-UL-us Classification mark,
shown below.

Vivid 7 SCANNERS PRODUCED BEFORE

SEPTEMBER 2004:

“CLASSIFIED BY UNDERWRITERS
LABORATARIES INC WITH RESPECT TO
ELECTRICAL SHOCK, FIRE AND
MECHANICAL HAZARDS ONLY IN
ACCORDANCE WITH UL2601-1 AND CAN/
CSA C22.2 NO.601.1”

REAR OF CONSOLE

REAR OF CONSOLE ON Vivid 7

PRODUCED AFTER SEPTEMBER

2004

REAR OF CONSOLE ON Vivid 7

PRODUCED BEFORE SEPTEMBER

2004

This unit carries the CE mark.
The Vivid 7 unit complies with regulatory

requirements of the European Directive 93/
42/EEC concerning medical devices.

It also complies with emission limits for a
Group 1, Class B Medical Device as stated in
EN 60601-1-2
(IEC 60601-1-2).
(Units produced before 2 May 2002 have the
CE0301 label.)

“CAUTION” The equilateral triangle is
usually used in combination with other
symbols to advise or warn the user.

“ATTENTION - Consult accompanying
documents” is intended to alert the user to
refer to the operator manual or other
instructions when complete information
cannot be provided on the label.

REAR OF CONSOLE

Various

Various

1 - 12 Section 1-3 - Important Conventions

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Table 1-6 Product Icons (cont’d) sheet 3 of 4

LABEL/SYMBOL PURPOSE/MEANING LOCATION

“CAUTION - Dangerous voltage” (the
lightning flash with arrowhead in equilateral
triangle) is used to indicate electric shock
hazards.

Various

“Mains OFF” Indicates the power off position
of the mains power switch.

“OFF/Standby” Indicates the power off/
standby position of the power switch.

CAUTION
This Power Switch DOES NOT ISOLATE
Mains Supply

“Mains ON” Indicates the Power ON position
of the mains power switch.

“ON” Indicates the power on position of the
power switch.

CAUTION
The Power Switch on the Operator Panel
DOES NOT ISOLATE Mains Supply

“Protective Earth” Indicates the protective
earth (grounding) terminal.

“Equipotential”
Indicates the terminal to be used for
connecting equipotential conductors when
interconnecting (grounding) with other
equipment as described in IEC60601-1.

Rear of system adjacent to mains switch

Adjacent to On/Off (Standby) Switch

Used several places inside the scanner.

Rear of console

This symbol indicates that waste electrical
and electronic equipment must not be
disposed of as unsorted municipal waste and
must be collected separately. Please contact
an authorized representative of the
manufacturer for information concerning the
decommissioning of your equipment.

This product consists of devices that may
contain mercury, which must be recycled or
disposed of in accordance with local, state,
or country laws. (Within this system, the
backlight lamps in the monitor display
contain mercury.)

REAR OF THE LCD MONITOR

Rear Panel

REV. 1: USA ONLY

REV.2: USA AND CHINA

Chapter 1 - Introduction 1 - 13

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Table 1-6 Product Icons (cont’d) sheet 4 of 4

LABEL/SYMBOL PURPOSE/MEANING LOCATION

The following product pollution control
information is provided according to SJ/
T11364-2006 Marking for Control of
Pollution caused by Electronic
Information Products.

This symbol indicates the product contains
hazardous materials in excess of the limits
established by the Chinese standard SJ/
T11363-2006 Requirements for
Concentration Limits for Certain Hazardous
Substances in Electronic Information
Products. The number in the symbol is the
Environment-friendly Use Period (EFUP),
which indicates the period during which the
toxic or hazardous substances or elements
contained in electronic information products
will not leak or mutate under normal
operating conditions so that the use of such
electronic information products will not result
in any severe environmental pollution, any
bodily injury or damage to any assets. The
unit of the period is “Year”.

In order to maintain the declared EFUP, the
product shall be operated normally
according to the instructions and
environmental conditions as defined in the
product manual, and periodic maintenance
schedules specified in Product Maintenance
Procedures shall be followed strictly.

Consumables or certain parts may have their
own label with an EFUP value less than the
product. Periodic replacement of those
consumables or parts to maintain the
declared EFUP shall be done in accordance
with the Product Maintenance Procedures.
This product must not be disposed of as
unsorted municipal waste, and must be
collected separately and handled properly
after decommissioning.

Rear Panel

(China)

1 - 14 Section 1-3 - Important Conventions

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Section 1-4 Safety Considerations

1-4-1 Introduction

The following safety precautions must be observed during all phases of operation, service and repair of
this equipment. Failure to comply with these precautions or with specific warnings elsewhere in this
manual, violates safety standards of design, manufacture and intended use of the equipment.

Chapter 1 - Introduction 1 - 15

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-4-2 Human Safety

DANGER

WARNINGWARNING

WARNINGWARNING

WARNINGWARNING

WARNINGWARNING

WARNINGWARNING

DANGEROUS VOLTAGES, CAPABLE OF CAUSING DEATH, ARE PRESENT IN
THIS EQUIPMENT. USE EXTREME CAUTION WHEN HANDLING, TESTING AND
ADJUSTING.

WHEN THE TOP CONSOLE IS IN ITS LOCKED POSITION, THE GAS SPRING IS
COMPRESSED AND STORES MECHANICAL ENERGY. DURING NORMAL OPERATION
THE TOP CONSOLE, THE WEIGHT OF THE MONITOR AND THE MECHANICAL FORCE
OF THE GAS SPRING ARE IN BALANCE. TAKE CARE IF/WHEN YOU ACTIVATE THIS
GAS SPRING. PERSONAL INJURY CAN OCCUR AFTER THE PANEL IS REMOVED AND
THE SPRING PRESSURE IS RELEASED. TAKE CARE WHEN YOU REPAIR THE
ELEVATION ASSEMBLY.

TWO PEOPLE SHOULD UNPACK THE UNIT BECAUSE OF ITS WEIGHT. TWO PEOPLE ARE
REQUIRED WHENEVER A PART WEIGHING 16 KG (35 LBS) OR MORE MUST BE LIFTED.

USE ALL PERSONAL PROTECTING EQUIPMENT (PPE) SUCH AS GLOVES, SAFETY
SHOES, SAFETY GLASSES, AND KNEELING PAD, TO REDUCE THE RISK OF INJURY.

BEWARE OF POSSIBLE SHARP EDGES ON ALL MECHANICAL PARTS. IF SHARP
EDGES ARE ENCOUNTERED, THE APPROPRIATE PPE SHOULD BE USED TO
REDUCE THE RISK OF INJURY.

WEAR ALL PPE INCLUDING GLOVES AS INDICATED IN THE CHEMICAL MATERIAL
SAFETY DATA SHEET (MSDS) OR PRODUCT DATA SHEET.

WARNINGWARNING

WARNINGWARNING

WARNINGWARNING

ENSURE THAT THE SYSTEM IS TURNED OFF AND UNPLUGGED. TO VERIFY THAT
THE FRONT END POWER SUPPLY (FEPS) IS IN A ZERO ENERGY STATE, WAIT AT
LEAST 20 SECONDS FOR THE CHARGE ON THE FEP’S OUTPUTS TO BLEED OFF.

WHEN THE UNIT IS RAISED FOR A REPAIR OR MOVED ALONG ANY INCLINE, USE
EXTREME CAUTION SINCE IT MAY BECOME UNSTABLE AND TIP OVER.

TILTING THE CONSOLE REQUIRES TWO PEOPLE IN ORDER TO AVOID INJURY TO
SERVICE PERSONNEL AND DAMAGE TO THE EQUIPMENT.

Operating personnel must not remove the system covers.
Servicing should be performed by authorized personnel only.
Only personnel who have participated in a Vivid 7 Training are authorized to service the equipment.

1 - 16 Section 1-4 - Safety Considerations

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-4-3 Mechanical Safety

WARNINGWARNING

PRIOR TO ELEVATING SCANNER, VERIFY THAT THE KEYBOARD IS LOCKED IN ITS
LOWEST POSITION. VERIFY THAT THE FRONT BRAKE IS LOCKED AND THE
SCANNER IS UNABLE TO SWIWEL. VERIFY THAT THE REAR BRAKES ARE IN THE
LOCKED POSITION.

WARNINGWARNING

WARNINGWARNING

WARNINGWARNING

WARNINGWARNING

WARNINGWARNING

CAUTION

WHEN THE UNIT IS RAISED FOR A REPAIR OR MOVED ALONG ANY INCLINE, USE
EXTREME CAUTION SINCE IT MAY BECOME UNSTABLE AND TIP OVER.

ULTRASOUND PROBES ARE HIGHLY SENSITIVE MEDICAL INSTRUMENTS THAT CAN
EASILY BE DAMAGED BY IMPROPER HANDLING. USE CARE WHEN HANDLING AND
PROTECT FROM DAMAGE WHEN NOT IN USE. DO NOT USE A DAMAGED OR
DEFECTIVE PROBE. FAILURE TO FOLLOW THESE PRECAUTIONS CAN RESULT IN
SERIOUS INJURY AND EQUIPMENT DAMAGE.

NEVER USE A PROBE THAT HAS FALLEN TO THE FLOOR. EVEN IF IT LOOKS OK, IT
MAY BE DAMAGED.

REMEMBER: IF THE FRONT CASTER SWIVEL LOCK IS ENGAGED FOR
TRANSPORTATION, PRESSING THE RELEASE PEDAL ONCE DISENGAGES THE
SWIVEL LOCK. YOU MUST DEPRESS THE RELEASE PEDAL A SECOND TIME TO
ENGAGE THE BRAKE.

THE SYSTEM SHOULD NOT BE MOVED WITH THE OPERATOR PANEL EXTENDED.
MOVE THE OPERATOR PANEL TO ITS CENTERED AND LOCKED POSITION. LOWER
THE OPERATOR PANEL AS MUCH AS POSSIBLE BEFORE MOVING THE SYSTEM.

Ensure that nobody touch the console arm/frogleg when moving the Operator Panel (Control
Console).

CAUTION

CAUTION

CAUTION

CAUTION

CAUTION

Do not move the unit if the Operator Panel (Control Console) is in unlocked position.

Always lock the Operator Panel (Control Console) in its parking (locked) position before moving
the scanner around.

Keep the heat venting holes on the monitor unobstructed to avoid overheating of the monitor.

VIVID 7 weighs 190 kg (419 lbs) or more, depending on installed peripherals, when ready for use.
Care must be used when moving it or replacing its parts. Failure to follow the precautions listed
below could result in injury, uncontrolled motion and costly damage.

ALWAYS:

- Be sure the pathway is clear.

- Use slow, careful motions.

- Use two people when moving on inclines or lifting more than 16 kg (35 lbs).

To avoid injury when you move the LCD monitor and the monitor arm, do NOT put your finger,
hand, or object on the joint of the monitor and the monitor arm.

Chapter 1 - Introduction 1 - 17

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-4-3 Mechanical Safety (cont’d)

-

CAUTION

CAUTION

CAUTION

CAUTION

CAUTION

CAUTION

CAUTION

Before you move or transport the system, make sure to lock the LCD monitor firmly and flip
down the monitor to prevent damage to the system.

To avoid injury or damage to the monitor, make sure there is nothing within range of the LCD
before moving the monitor and the monitor arm. This includes people as well as things.

Do not transport Vivid 7 in a vehicle without locking the casters (wheels).

Use all Personal Protection Equipment (PPE) such as gloves, safety shoes, safety glasses, and
kneeling pad, to reduce the risk of injury.

Use Protective Glasses during Drilling, Filing and during all other work where eyes need
protection.

Use Safety Shoes when doing work where there is any chance of foot damage.

Use Protective Gloves when drilling and cutting.

NOTE: Special care should be taken when transporting the unit in a vehicle:

• Lock Operator Panel (Control Console) in place.

• Eject any Magneto Optical disk, CD or DVD from their drive.

• Secure the unit in an upright position.

• Lock the casters (wheels) (brake)

• DO NOT use the Operator Panel (Control Console) as an anchor point.

• Place the probes in their carrying case.

1 - 18 Section 1-4 - Safety Considerations

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-4-4 Electrical Safety

1-4-4-1 Safe Practices

Follow these guidelines to minimize shock hazards whenever you are using the scanner;

• The equipment chassis must be connected to an electrical ground.

• The unit is equipped with a three-conductor AC power cable. This m ust be plugged into an approved
electrical outlet with safety ground.

• The power outlet used for this equipment should not be shared with other types of equipment.

• Both the system power cable and the power co nnector must meet international electrical standards.

WARNINGWARNING

CONNECTING A Vivid 7 SCANNER TO THE WRONG VOLTAGE LEVEL WILL MOST
LIKELY DESTROY IT.

1-4-4-2 Probes

Follow these guidelines before connecting a probe to the scanner;

• Inspect the probe prior to each use for damage or degradation to the;

- housing

- cable strain relief

-lens

- seal

• Do not use a damaged or defective probe.

• Never immerse the probe connector or adapter into any liquid.

Chapter 1 - Introduction 1 - 19

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Section 1-5 Labels Locations

1-5-1 Labels on Front of Monitor and Operator Panel

Table 1-7 Labels on Front of Monitor and Operator Panel

DESCRIPTION ILLUSTRATION

Label, Vivid 7 (Monitor)

(Introduced in 2001)

Label, Vivid 7 (Monitor)

(Introduced in 2002)

Label, Vivid 7 PRO (Monitor)

(Introduced in 2002)

Label, Vivid 7 Dimension (Monitor)

(Introduced 2004)

For Vivid 7 Dimension with LCD screen

(option since 2006)

1 - 20 Section 1-5 - Labels Locations

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Table 1-7 Labels on Front of Monitor and Operator Panel (cont’d)

DESCRIPTION ILLUSTRATION

Label, GE Logo

Label, On/Off Switch

(Two versions of the label have been used, the one to the

right is the latest version.)

OR

ON/OFF:

press once

FC314104 03

LABEL POSITION

Chapter 1 - Introduction 1 - 21

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-5-2 Labels on Front of LCD Monitor

Table 1-8 Label on Front of LCD Monitor

DESCRIPTION ILLUSTRATION

Label, Vivid 7

Label, GE Healthcare

1-5-3 Labels on Rear of LCD Monitor

Table 1-9 Label on Rear of LCD Monitor

DESCRIPTION ILLUSTRATION

Firmware label LCD monitor

1 - 22 Section 1-5 - Labels Locations

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Table 1-9 Label on Rear of LCD Monitor (cont’d)

DESCRIPTION ILLUSTRATION

FOR USA ONLY: LCD MONITOR MERCURY HG.

The first version was introduced October 1, 2007

For Global Use: LCD MONITOR MERCURY HG

This version was introduced ultimo October 2007.

(English / Chinese)

Chapter 1 - Introduction 1 - 23

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-5-4 Labels on Front Handle

Table 1-10 Labels on Front Handle

DESCRIPTION ILLUSTRATION

Label, Front Handle

Three versions of the label have been used. The lower

one is the latest version.

OR

OR

1 - 24 Section 1-5 - Labels Locations

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-5-5 Labels Near Connectors on Front

Table 1-11 Labels Near Connectors on Front

Description Illustration

Label, Probe Connector

(The Label, “Probe Connector” consists of three labels,

named;

- “Main Label Part”,

- “Heart Symbol” and

- “See Manual symbol”.)

Label, Patient I/O Module II

BEP1 ONLY:

Label CD ROM

(introduced April 2002)

Chapter 1 - Introduction 1 - 25

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-5-6 Label on External I/O

Table 1-12 Label, External I/O

DESCRIPTION ILLUSTRATION

Marking introduced
late 2002.

(Not In Use)

Label, External. I/O

1 - 26 Section 1-5 - Labels Locations

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-5-7 Labels at AC Mains Inlet and Circuit Breaker

Table 1-13 Labels at AC Mains Inlet and Circuit Breaker (used before May 2002)

DESCRIPTION ILLUSTRATION

Label, Warning

System: P/N, Power rating

Label, System: S/N

Label,

C

G E M e d i c a l S y s t e m s

P / N :

C a t . n o . :

P r o d u c t n a m e :

F C 0 0 0 0 3 0

H 5 5 0 0 1 A B

V i v i d 7

2 3 0

5

5 0 / 6 0

V A C

A

H z

F B 0 1 4 9 8 0 0 7

OR

OR

OR

OR

Chapter 1 - Introduction 1 - 27

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Table 1-13 Labels at AC Mains Inlet and Circuit Breaker (used before May 2002) (cont’d)

DESCRIPTION ILLUSTRATION

Ground (GND) Label. (Used on 230 VAC Systems and some 100-120 VAC Systems.)

Label, GND-symbol

l

Hospital Grade Ground

Label, GND-symbol., Hospital Grade

(GND) Label. (Used on some
100-120 VAC Systems)

Table 1-14 Labels at AC Mains Inlet and Circuit Breaker (used after May 2002)

DESCRIPTION ILLUSTRATION

Label, AC Controller

1 - 28 Section 1-5 - Labels Locations

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-5-8 Label on Rear Cover - Vivid 7 Dimension

Table 1-15 Label on Rear Cover - Vivid 7 Dimension sheet 1 of 3

DESCRIPTION ILLUSTRATION

l

Label, General Info

(Located on rear of system)

Label used for Vivid 7 Dimension after FEB. 2008

Label, General Info

(Located on rear of system)

Label used for Vivid 7 Dimension after OCT. 2005

Chapter 1 - Introduction 1 - 29

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Table 1-15 Label on Rear Cover - Vivid 7 Dimension (cont’d) sheet 2 of 3

DESCRIPTION ILLUSTRATION

Label, General Info

(Located on rear of system)

Label used for Vivid 7 Dimension between JUNE 2005 and

OCT. 2005.

l

CISPR11

Group 1 Class B

Groupe 1 Classe B

CLASS I

TYPE CF

FB014970-06

Label, General Info

(Located on rear of system)

Label used for Vivid 7 Dimension

1 - 30 Section 1-5 - Labels Locations

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Table 1-15 Label on Rear Cover - Vivid 7 Dimension (cont’d) sheet 3 of 3

DESCRIPTION ILLUSTRATION

Label, General Info

(Located on rear of system)

Label used for Vivid 7 Dimension,

after September 2004.

Chapter 1 - Introduction 1 - 31

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-5-9 Label on Rear Cover - Vivid 7

Table 1-16 Label on Rear Cover - Vivid 7 sheet 1 of 2

DESCRIPTION ILLUSTRATION

l

Label, General Info

(Located on rear of system)

Label used for Vivid 7

after JUNY 2005

CLASS I

TYPE CF

CISPR11

Group 1 Class B

Groupe 1 Classe B

FC014667-02

Label, General Info

(Located on rear of system)

Label used for Vivid 7

1 - 32 Section 1-5 - Labels Locations

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Table 1-16 Label on Rear Cover - Vivid 7 (cont’d) sheet 2 of 2

DESCRIPTION ILLUSTRATION

Label, General Info

(Located on rear of system)

Label used for Vivid 7 between 2 May 2002 and

September 2004.

l

Label, General Info

(Located on rear of system)

Label used for Vivid 7 before 2 May 2002

Chapter 1 - Introduction 1 - 33

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-5-10 Label on Rear Cover - Vivid 7 PRO

Table 1-17 Label on Rear Cover - Vivid 7 PRO sheet 1 of 3

DESCRIPTION ILLUSTRATION

l

Label, General Info

(Located on rear of system)

Label used for Vivid 7 PRO

introduced FEB. 2008

Label, General Info

(Located on rear of system)

Label used for Vivid 7 PRO

introduced OKT. 2005

1 - 34 Section 1-5 - Labels Locations

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Table 1-17 Label on Rear Cover - Vivid 7 PRO (cont’d) sheet 2 of 3

DESCRIPTION ILLUSTRATION

FC014169-05

Label, General Info
(Located on rear of system)
Label used for Vivid 7 PRO

introduced JUNE 2005

CLASS I

TYPE CF

CISPR11

Group 1 Class B

Groupe 1 Classe B

Label, General Info
(Located on rear of system)
Label used for Vivid 7 PRO

introduced March 2005

Chapter 1 - Introduction 1 - 35

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Table 1-17 Label on Rear Cover - Vivid 7 PRO (cont’d) sheet 3 of 3

DESCRIPTION ILLUSTRATION

Label, General Info

(Located on rear of system)

Label used for Vivid 7 PRO

introduced September 2004

Label, General Info

(Located on rear of system)

Label used for Vivid 7 PRO

before September 2004

1 - 36 Section 1-5 - Labels Locations

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-5-11 Label on Rear Cover - Vivid 7 Dimension for China

Table 1-18 Label on Rear Cover - Vivid 7 Dimension for China sheet 1 of 4

DESCRIPTION ILLUSTRATION

l

Label, General Info
(Located on rear of system)

Label used for Vivid 7 to China

introduced OCTOBER 2007

Label, General Info
(Located on rear of system)

Label used for Vivid 7 to China

introduced FEBRUARY 2007

Chapter 1 - Introduction 1 - 37

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Table 1-18 Label on Rear Cover - Vivid 7 Dimension for China (cont’d) sheet 2 of 4

DESCRIPTION ILLUSTRATION

Label, General Info

(Located on rear of system)

Label used for Vivid 7 to China

introduced OCTOBER 2005

Label, General Info

(Located on rear of system)

Label used for Vivid 7 to China
introduced SEPTEMBER 2005

1 - 38 Section 1-5 - Labels Locations

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Table 1-18 Label on Rear Cover - Vivid 7 Dimension for China (cont’d) sheet 3 of 4

DESCRIPTION ILLUSTRATION

FC014213-04

Label, General Info
(Located on rear of system)

Label used for Vivid 7 to China

introduced JUNE 2005

CLASS I

TYPE CF

Label, General Info
(Located on rear of system)

Label used for Vivid 7 to China

introduced March 2005

Chapter 1 - Introduction 1 - 39

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Table 1-18 Label on Rear Cover - Vivid 7 Dimension for China (cont’d) sheet 4 of 4

DESCRIPTION ILLUSTRATION

Label, General Info

(Located on rear of system)

Label used for Vivid 7 to China

introduced September 2004

1 - 40 Section 1-5 - Labels Locations

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-5-12 Label on Rear Cover - Vivid 7 for China

Table 1-19 Label on Rear Cover - Vivid 7 for China

DESCRIPTION ILLUSTRATION

l

Label, General Info
(Located on rear of system)

Label used for Vivid 7 before 2 May 2002

Label, General Info
(Located on rear of system)

Label used for Vivid 7 to China

before September 2004

Chapter 1 - Introduction 1 - 41

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-5-13 Label on Rear Cover - Vivid 7 PRO for China

Table 1-20 Label on Rear Cover - Vivid 7 PRO for China sheet 1 of 4

DESCRIPTION ILLUSTRATION

l

Label, General Info

(Located on rear of system)

Label used for Vivid 7 PRO to China

introduced OCTOBER 2007

Label, General Info

(Located on rear of system)

Label used for Vivid 7 PRO to China

introduced FEBRUARY 2007

1 - 42 Section 1-5 - Labels Locations

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Table 1-20 Label on Rear Cover - Vivid 7 PRO for China (cont’d) sheet 2 of 4

DESCRIPTION ILLUSTRATION

Label, General Info

(Located on rear of system)

Label used for Vivid 7 PRO to China

introduced OCTOBER 2005

Label, General Info

(Located on rear of system)

Label used for Vivid 7 PRO to China

introduced SEPTEMBER 2005

Chapter 1 - Introduction 1 - 43

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Table 1-20 Label on Rear Cover - Vivid 7 PRO for China (cont’d) sheet 3 of 4

DESCRIPTION ILLUSTRATION

Label, General Info

(Located on rear of system)

Label used for Vivid 7 PRO to China

after JUNY 2005

l

CLASS I

TYPE CF

FC014216-04

Label, General Info

(Located on rear of system)

Label used for Vivid 7 PRO to China

1 - 44 Section 1-5 - Labels Locations

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Table 1-20 Label on Rear Cover - Vivid 7 PRO for China (cont’d) sheet 4 of 4

DESCRIPTION ILLUSTRATION

Label, General Info

(Located on rear of system)

Label used for Vivid 7 PRO to China

after September 2004

Label, General Info

(Located on rear of system)

Label used for Vivid 7 PRO to China

before September 2004

Chapter 1 - Introduction 1 - 45

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-5-14 Label on Rear Cover - Vivid 7 Dimension for Korea

Table 1-21 Label on Rear Cover - Vivid 7 Dimension for Korea

DESCRIPTION ILLUSTRATION

l

Label, General Info

(Located on rear of system)

Label used for Vivid 7 Dimension after DEC. 2006

1 - 46 Section 1-5 - Labels Locations

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-5-15 Label on Rear Cover - Vivid 7 PRO for Korea

Table 1-22 Label on Rear Cover - Vivid 7 PRO for Korea

DESCRIPTION ILLUSTRATION

l

Label, General Info
(Located on rear of system)

Label used for Vivid 7 Dimension after DEC. 2006

Chapter 1 - Introduction 1 - 47

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-5-16 Label on Rear Cover - Vivid 7 - Details Descriptions

Table 1-23 Label on Rear Cover - Vivid 7, Details Descriptions sheet 1 of 2

DESCRIPTION ILLUSTRATION

l

Label on rear side of the Vivid 7.

CLASS I

The Vivid 7 ultrasound unit is a Class I
device, type CF, according to Sub­clause 14 of IEC60601-1 (1988).

TYPE CF

Equipment Type CF (heart in the box
symbol) IEC 878-02-05 indicates
equipment having a floating applied part
having a degree of protection suitable
for direct cardiac contact.

This symbol indicates that waste
electrical and electronic equipment must
not be disposed of as unsorted
municipal waste and must be collected
separately. Please contact an
authorized representative of the
manufacturer for information concerning
the decommissioning of your equipment.

Please refer to the Recycling

instructions on the label located outside

the Front End Card Rack’s Cover (Inside

the unit), see Figure 1-20 on page 1-67

and Figure 1-23 on page 1-70.

The system is not designed for use with

flammable anesthetic gases.

1 - 48 Section 1-5 - Labels Locations

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

Table 1-23 Label on Rear Cover - Vivid 7, Details Descriptions (cont’d) sheet 2 of 2

DESCRIPTION ILLUSTRATION

Vivid 7 SCANNERS PRODUCED

AFTER SEPTEMBER 2004:

“TESTED AND PRODUCTION

MONITORED BY TUV PRODUCT

SERVICE NRTL WITH RESPECT TO

ELECTRICAL SHOCK, FIRE AND

MECHANICAL HAZARDS ONLY IN

ACCORDANCE WITH UL2601-1 AND

CAN/CSA C22.2 NO.601.1”

Products produced before September

2004 will bear the c-UL-us Classification

mark, shown below.

Vivid 7 SCANNERS PRODUCED

BEFORE SEPTEMBER 2004:

“CLASSIFIED BY UNDERWRITERS

LABORATARIES INC WITH RESPECT

TO ELECTRICAL SHOCK, FIRE AND

MECHANICAL HAZARDS ONLY IN

ACCORDANCE WITH UL2601-1 AND

CAN/CSA C22.2 NO.601.1”

Vivid 7 SCANNERS PRODUCED AFTER SEPTEMBER 2004:

This unit carries the CE mark.
The Vivid 7 unit complies with regulatory

requirements of the European Directive
93/ 42/EEC concerning medical devices.

It also complies with emission limits for a
Group 1, Class B Medical Device as
stated in EN 60601-1-2 (IEC 60601-1-2).
(Units produced before 2 May 2002
have the CE0301 label.)

The sign indicates that Non Ionizing

Radiation is/may be emitted from the

unit.

Chapter 1 - Introduction 1 - 49

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-5-17 Labels on Internal I/O (Inside Scanner)

Label on Front-End Card Cage Side of Internal I/O

Figure 1-2 Labels on Internal I/O (Inside Scanner), Front-End Card Cage Side of Internal I/O

1 - 50 Section 1-5 - Labels Locations

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-5-18 Labels on Internal I/O (Inside Scanner)

Label on Back-End Processor Side of Internal I/O

Figure 1-3 Labels on Internal I/O (Inside Scanner), Back-End Processor Side of Internal I/O

Chapter 1 - Introduction 1 - 51

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-5-18 Labels on Internal I/O (Inside Scanner) (cont’d)

i

F

610

51

15 11

A1

5

1

M

A2

5

69

1

M

A3

69

15 9

81

F

A4

915

18

M

A5

Connectors to/from Back End

Bac

nt

k

e

En

r

na

d

l

I

O

m

o

P

r

oc

d

ul

e

e

s

s

e

s

o

r(

e

BEP

n

f

r

o

m

)

s

i

d

e

A6

A8

+3.3V

A1 BW printer video, printer remote control
A2 VCR remote control (RS232)
A3 Spare RS232
A4 Signals & power to/from top console
A5 Signals to/from top console
A6 Audio left out to VCR
A7 Audio right out to VCR
A8 Audio left reply from VCR
A9 Audio right reply from VCR
A10 SVideo out to VCR
A11 SVideo in from VCR

A7

A9

+5V

+6V

+10V

+15V

+5V

+12V

From
Back

-5V

End

-15V

A10

F

1

5

B4

B8

5

69

1

M

69

B3

69

A11

F

125

6

9

B5

B1 USB#1 (top console conection)
B2 USB#2 (external i/o connection)
B3 10/100 Base-TX Ethernet
B4 Audio in to BEP, Audio out from BEP, Microphone in to BEP
B5 PC2IO board signals
B6 PC2IO board signals and power
B7 COM (external i/o connection) NOT USED
B8 COM (modem - setup as COM2)
B9 BEP Power Supply control (UPS)

26

50

B1 B2

F

1

1425

13

B6

B7

5

1

M

5

1

M

B9

P31

Connector to motherboard

P32

Figure 1-4 Label on Internal I/O on units with BEP2

1 - 52 Section 1-5 - Labels Locations

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-5-18 Labels on Internal I/O (Inside Scanner) (cont’d)

NOTE: On units with RFI ONLY: A11 has been moved from the Internal I/O module to the BEP.

Figure 1-5 Label on Internal I/O on units with BEP2.2, BEP3 and BEP3.2

Chapter 1 - Introduction 1 - 53

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-5-19 Label, Internal Connections (Int.Conn.)

Located on the outside of the Front-End Card Rack (FEP1) Cover (inside Vivid 7). Different versions of
the label have been used since production start.

AC

Cable and Connector numbering and naming system used:

IIO = Internal IO module
EIO = External IO module
BEP = Backend Processor
FEP = Frontend Processor
ACP = AC controller module
ACD = AC distribution box
ACT = AC isolation transformer module
BEPIO = IO module on the BEP

Axx : connectors on IIO with other connections than the BEP
Bxx : connectors on IIO that are connected to BEP
Cxx : connectors on BEP, except for the BEPIO
Dxx : connectors on BEPIO
Exx : connector on the BEP power supply
Fxx : connectors on ACP
Gxx : connectors on FEP
Hxx : external accesable connectors (Doppler probe)
Kxx : connectors on MODEM
Mxx : connectors on ACT
Nxx : connectors on ACD
Lxx : connectors on EIO

F

connector

to EIO

A

P30

P31

A13

A12

F

F

81

81

15 9

15 9

Connector to

motherboard

14

25

P32

A12 Spare power (future option)
A13 Power to 3D box (future option)
A14 AC power control
A15 Signals to rotation adapter (future option)
A16 Signals to 3D box (future option)

M

M

1

18

915

M

1

69

13

5

A15

A14

A16

25

1

n

e

e

s

O

I

I

L4: Audio out (right)
L5: Audio out (left)
L6: Trig out
L7: Foot switch
L8: Serial port
L9: Remote expose #1
L10: Remote expose #2
L11: Analog modem
L12: Composite video output
L13: B&W video output
L14: S-Video output
L15: SVGA output
L16: USB
L17: Ethernet

e

d

i

s

P

E

F

m

o

r

f

Distribution

box

N5
N4
N3
N2
N1

External IO module

L1 L2

69

M

5

1

Service

use ONLY

(remote

power on/off

control)

Monitor

F1

115V

H1

TX-128

RX-128

Relay board

G1

Board location in Front End Processor (FEP)

L3

69

4

M

5

1

1

Analogue

RS-232

phone

Connect

Connect

to InSite

to InSite

MODEM

MODEM

Peripherals

Modem

F3

F2

115V

230V

or

230V

F6

From Isolation

transformer

BF-64

BF-64

RFT-1

FEC-2

SDP-2

L4

L5

L11 L12 L13 L14

Back End

Processor

Front End

F4

F5

230V

230V

DC-power

IMP

Not used

G3

G2

supply

TX-power

G4

L6

L7

External IO module

(Front view)

supply

Rack

RESET

115V or 230V inlet
voltage selection

115V

Cable to

C15

Isolation

transformer

module

M

L8

F

L15

WARNING !

Live Voltage inside,

do not open.

AC power control module

230V

F7

To Isolation
transformer

M1

L9

L10

L16

L17

n

l

a

o

r

F

t

n

o

c

F9

230V
115V

Voltage Selection

V

0

2

1

on Peripherals

-

0

V

0

0

1

4

=

2

-

t

V

0

e

5

2

l

1

2

n

i

1

=

s

e

V

0

m

i

3

t

2

2

)

r

e

o

g

a

t

l

½

(

o

v

K4

69

15

M

F8

Cutout in the label

Modem

power

supply

60,0

Modem

MT5634ZBA

K3

K1

K2

Part no. : FB314746
Rev. : 05

Figure 1-6 Label on FEP1, Internal Connections

1 - 54 Section 1-5 - Labels Locations

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-5-20 Label, Internal Connections (Int.Conn.)

Located on the outside of the Front-End Card Rack’s cover (inside unit). Different versions of the label
have been used since production start.

AC

Cable and Connector numbering and naming system used:

IIO = Internal IO module
EIO = External IO module
BEP = Backend Processor
FEP = Frontend Processor
ACP = AC controller module
ACD = AC distribution box
ACT = AC isolation transformer module
BEPIO = IO module on the BEP

Axx : connectors on IIO with other connections than the BEP
Bxx : connectors on IIO that are connected to BEP
Cxx : connectors on BEP, except for the BEPIO
Dxx : connectors on BEPI O
Exx : connector on the BEP power supply
Fxx : connectors on ACP
Gxx : connectors on FE P
Hxx : external accesable connectors (Doppler probe)
Kxx : connectors on MODE M
Mxx : connectors on ACT
Nxx : connectors on ACD
Lxx : connectors on EIO

F

connector

to EIO

P30

IIO seen from F

A

1

L4: Audio out (right)
L5: Audio out (left)
L6: Trig out
L7: Foot switch
L8: Serial port
L9: Remote expose #1
L10: Remote expose #2
L11: Analog modem
L12: Composite video output
L13: B&W video output
L14: S-Video output
L15: SVGA output
L16: USB
L17: Ethernet

25

P31

A13

A12

F

F

81

81

15 9

15 9

A12 Spare power (future option)

Connector to

motherboard

14 25

P32

A13 Power to 3D box (future option)
A14 AC power control
A15 Signals to rotation adapter (future optio n)
A16 Signals to 3D box (future optio n)

M

M

113

18

915

M

15

69

A15

A14

A16

EP side

Distribution

box

N5
N4
N3
N2

N1

External IO module

L1 L2

69

M

15

Service

use ONLY

(remote

power on/of f

control)

Monitor

F1 F2 F3 F4

115V

H1

TX-128

RX-128

Relay board

G1

Board location in Front End Processor (FEP)

L3

69

M

14

15

Analogue

RS-232

phone

Connect

Connect

to InSit e

to InSit e

M ODEM

M ODEM

Peripherals

Modem

115V

230V

or

230V

F6

From Isolation

transformer

BF-64

BF-64

TX128 (optional)

L4 L5

L11 L12 L13 L14

Back End

Processor

230V

230V

DC-power

RFI

G2

TX-powe r

L6

L7

External IO module

(Front view)

Front End

F5

supply

G3

suppl y

G4

Rack

RESET

115V or 230V inlet
voltage selection

115V

Cable to

C15

Isolation

transformer

modul e

M

L8

F

L15

WARNING !

Live Voltage inside,

do not open.

AC power control modul e

230V

F7

To Isolation
transformer

M1

L9

L10

L16

L17

115V = 100-1

230V = 220-2
(½ or 2 times i

an

ol

F

contr

F9

230V
115V

Voltage Selection

20V

on Peripherals

40V

nlet

e)

voltag

15

M

F8

69

60,0

Modem

K3

MT5634ZBA

K1 K2

Part no. : FC314311
Rev. : 01

Modem

power

K4

supply

Figure 1-7 Label on FEP2 (w/RFI)

Chapter 1 - Introduction 1 - 55

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-5-21 Label, BEP1, Internal Connections (Int.Conn.)

Located on the outside of the Back-End Processor’s Cover (inside unit)

Figure 1-8 Label on BEP1, Internal Connections (Int.Conn.)

1 - 56 Section 1-5 - Labels Locations

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-5-22 Label, BEP2, Internal Connections (Int.Conn.)

Located on the outside of the Back-End Processor’s Cover (inside unit)

AC Power
Connect to AC
Control Module

Mouse

NOT

USED

C1

C2

Keyboard

NOT USED

AC Power
Connect to AC
Control Module

Mouse

NOT

USED

C1

C2

Keyboard

NOT USED

Power for i/o boards - to B6

F

15 11

610

610

F

F

51

51

D4

Voltage

BEP power supply

M

E1

BEP
FAN

Signals to i/o boards - to B5

50

50

SVGA in - from C13 SVGA to monit or RGB to Color Printer

15 11

51

D1

610

125

125

26

26

15 11

F

D3

Selection

SHALL be

230V

F

125

26

Not used

No external connection

SCSI for optional MO drive

Not used

50

Not used

UPS Control

C15

PCI

slot 1

PCI

slot 2

PCI

slot 3

USB #2 to B2

14

C3

14

C4

USB #1 to B1

C5

13

1

M

69

COM to B8

Parallel Port

NOT USED

5

14

C20

to Color Printer to BW Printer

1

F

C17

LAN

1425

C13C6

51

15 11

VIDEO to D3

to B3

USB #3 NOT USED

F

C18

610

C19

USB #4 NOT USED

C21

14

14

14

USB #6USB #5

Audio In

Audio Out

C10

C9

Mic

C11

to B4

AGP

slot

Figure 1-9 Label on BEP2, Internal Connections (Int.Conn.) (First version of label)

Power for i/o boards - to B6

F

15 11

610

610

F

F

51

51

D4

Not used

PCI

slot 3

UPS Control

Voltage

Selection

SHALL be

USB #2 to B2

14

C3

14

C4

USB #1 to B1

230V

C5

BEP power supply

M

E1

Parallel Port
NOT USED

13

1

5

M

69

COM to B8

BEP
FAN

14

C20

NOT USED NOT USED

1

F

C17

LAN

1425

C13C6

51

15 11

VIDEO to D3

to B3

USB #3 to Color Printer

F

C18

610

C19

USB #4 to BW Printer

C21

14

14

14

USB #6USB #5

Audio In

Audio Out

C10

C9

Mic

C11

to B4

Signals to i/o boards - to B5

50

50

SVGA in - from C13 SVGA to mo nitor RGB to Color Printer

15 11

51

D1

610

125

125

26

26

15 11

F

D3

F

125

26

Not used

No external connection

SCSI for optional MO drive

Not used

50

C15

AGP

slot

PCI

slot 1

PCI

slot 2

81

F

15 9

D2

15 11

51

D5

F

5

9

to B9

6

1

PCI Bridge

to Front End Rack

C12

PCI

slot 4

81

F

15 9

D2

15 11

51

D5

F

5

9

to B9

6

1

PCI Bridge

to Front End Rack

C12

PCI

slot 4

610

F

134

C16

PCI

slot 5

610

F

134

C16

PCI

slot 5

35

Not used

68

PCI

slot 6

35

Not used

68

PCI

slot 6

Figure 1-10 Label, BEP2, Internal Connections (Int.Conn.) (Second version of label)

Chapter 1 - Introduction 1 - 57

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-5-23 Label, BEP4 as BEP2 Replacement, Internal Connections (Int.Conn.)

Located on the outside of the Back-End Processor’s Cover (inside Vivid 7)

Figure 1-11 Label, BEP4 as BEP2 Replacement, Internal Connections (Int.Conn.)

1 - 58 Section 1-5 - Labels Locations

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-5-24 Label, BEP2.2, Internal Connections (Int.Conn.)

Located on the outside of the Back-End Processor’s Cover (inside unit)

AC Power
Connect to AC
Control Module

Mouse

NOT

USED

C1

C2

Keyboard

NOT U SED

Voltage

Selection

SHALL be

USB #2 to B2

14

C3

14

C4

USB #1 to B1

230V

C5

Signals to i/o boards - to B5

BEP power supply

M

E1

Parallel Port

NOT USED

13

1

5

M

69

COM to B8

BEP
FAN

14

C20

NOT USED NOT USED

1

F

C17

LAN

1425

C13C6

51

15 11

VIDEO to D3

to B3

USB #3 to Color Printer

F

C18

610

C19

USB #4 to BW Printer

C21

14

14

14

USB #6USB #5

Audio In

C10

Audio Out

C11

C9

Mic

to B4

50

50

SVGA in - from C13 SVGA to monitor RGB to Color Printer

D1

15 11

610

51

F

D3

F

125

26

Not used

50

No external connection

SCSI for optional MO drive

C15

AGP

slot

PCI

slot 1

Figure 1-12 Label, BEP2.2, Internal Connections (Int.Conn.)

26

Not used

PCI

slot 2

125

125

F

26

15 11

15 11

51

51

D4

Power for i/o boards - to B6

81

F

15 9

610

610

F

F

15 11

51

A11

F

9

to B9

Not

used

6

UPS Control

C12

Not

used

PCI

slot 3

PCI

slot 4

D2

D5

5

1

PCI Bridge

610

134

to Front End Rack

C16

slot 5

F

PCI

35

Not used

68

PCI

slot 6

Chapter 1 - Introduction 1 - 59

GE HEALTHCARE
DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-5-25 Label, BEP4 as BEP2.2 Replacement, Internal Connections (Int.Conn.)

Located on the outside of the Back-End Processor’s Cover (inside Vivid 7)

Figure 1-13 Label, BEP4 as BEP 2-2 replacement, Internal Connections (Int.Conn.)

1 - 60 Section 1-5 - Labels Locations

GE HEALTHCARE

pp y

DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-5-26 Label, BEP3.x, Internal Connections (Int.Conn.)

Located on the outside of the Back-End Processor’s Cover (inside unit).

Figure 1-14 Label, BEP3.x, Internal Connections (Int.Conn.)

Chapter 1 - Introduction 1 - 61

GE HEALTHCARE

pp y

DIRECTION FC091194, REVISION 12 VIVID 7 SERVICE MANUAL

1-5-27 Label, BEP3.x with 4D, Internal Connections (Int.Conn.)

Located on the outside of the Back-End Processor’s Cover (inside unit).

Figure 1-15 Label, BEP3.x with 4D, Internal Connections (Int.Conn.)

1 - 62 Section 1-5 - Labels Locations