GE Measurement & Control
Druck DPI 620 Genii
Advanced Modular Calibrator
Quick Start Guide
7 March 2013 K0542
GE Measurement & Control
© 2013 General Electric Company. All Rights Reserved. Specifications are
subject to change without notice. GE is a registered trademark of General
Electric Company. Other company or product names mentioned in this
document may be trademarks or registered trademarks of their respective
companies, which are not affiliated with GE.
7 March 2013 K0542
Quick Start Guide Druck DPI 620 Genii
1 Overview
The Druck DPI620 Genii is a battery-powered instrument for electrical
measure and source operations and HART
Druck DPI 620 Genii also supplies the power and user interface
functions for all optional items. The touch-screen displays up to six
different parameters.
®
communications. The
2 Equipment in the Box
The following items are supplied with the Druck DPI 620 Genii:
• DC power supply/battery charger unit.
• Li-polymer battery.
• Set of six test leads.
• AC Probe.
• Quick Start Guide.
•Stylus.
3 Optional Items
The items that follow are optional items which can be used with the
Druck DPI 620 Genii:
• Pressure Module Carrier, MC 620, this attaches directly to the
Druck DPI 620 Genii to make a fully integrated pressure
instrument.
• Pressure Module, PM 620, this attaches to the pressure module
carrier (MC 620) or a pressure station (PV 62X) to enhance the
pressure measurement functionality.
• Pressure Stations, PV 62X, if the Druck DPI 620 Genii is installed in
a pressure station, it becomes a fully integrated pressure
calibrator.
7 March 2013 K0542 Initial Issue 1-1