USER GUIDE
Gateway VX760/VX765 Monitor
Contents
Using Your VX760/VX765 Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Setting up the monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Adjusting settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
On-screen display menu options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Video modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Maintaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Safety, Regulatory, and Legal Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
i
Using Your VX760/VX765 Monitor www.gateway.com
Setting up the monitor
Read all instructions before using the monitor and save them for later use.
Follow all warnings and instructions marked on the product.
To set up the monitor:
■ Attach the base
■ Connect the video and power cables
To attach the base:
1 Carefully set the monitor on its side.
2 Hold the base with the tab facing the back of the monitor and align the
hooks on the base with the corresponding slots on the bottom of the
monitor.
3 Slide the base toward the front of the monitor so all hooks are securely in
place. A retaining latch built into the base clicks into place when the base
is correctly attached.
4 Carefully set the monitor upright and place it on a sturdy, level surface.
To connect the video and power cables:
1 Position the monitor and your computer so you can easily get at the back
panel of each. Make sure that all power cables can reach a correctly
grounded electrical outlet.
2 Connect the video cable to the matching (blue) video port on the back of
your computer.
3 Tighten the screws on the video cable connector to keep it from coming
loose. Tightening the screws also prevents radio and TV interference.
2
www.gateway.com
Setting up the monitor
The openings in the monitor cabinet are
Caution
for ventilation. Do not block or cover
these openings. Do not insert anything
into these openings. If you put the
monitor in a bookcase or some other
enclosed space, make sure to leave at
least six inches (15 cm) around it for
ventilation.
4 Connect the power cable that came with the monitor to the AC power
connector on the back of the monitor. Only use the power cable that came
with the monitor.
AC p ower
connector
5 Plug the other end of the power cable into a correctly grounded electrical
outlet.
To turn on the monitor:
1 Press the power button on the front of the monitor.
EXIT button
2 Turn on your computer.
Power button
MENU button
Brightness/ button
Contrast/ button
3