Garmin XERO X1i Owner’s Manual

XERO® X1i

Owner’s Manual

All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.

Garmin®, the Garmin logo, ANT®, and Xero® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. Garmin Express™ and Laser Locate™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.

Mac® is a trademark of Apple Inc, registered in the U.S. and other countries. Windows® is a registered trademarks of Microsoft Corporation in the United States and other countries. Other trademarks and trade names are those of their respective owners.

Getting Started............................................................... 1

Device Overview......................................................................... 1

Installing AAA Batteries.............................................................. 2

Mounting the Scope.................................................................... 2

Installing the Remote Trigger Cable........................................... 2

Turning the Device On or Off...................................................... 3

Adjusting the Eyepiece............................................................... 3

Setup Overview.......................................................................... 3

Adjusting Windage and Elevation............................................... 3

Using the Scope............................................................. 3

Display Overview........................................................................ 3

Opening the Quick Options Menu.............................................. 4

Adjusting Brightness.............................................................. 4

Setting the Ranging Mode..................................................... 4

Setting a Manual Range........................................................ 4

Viewing Shot Dynamics......................................................... 4

Adding Bolt Profiles.................................................................... 4

Activating or Editing Bolt Profiles........................................... 4

Adding Aim Points..................................................................4

Laser Locations.......................................................................... 4

Sending Locations to a Device.............................................. 4

Measuring the Size of a Target...................................................5

Using Stalk Mode........................................................................5

Settings........................................................................... 5

Display Settings.......................................................................... 5

Color Settings........................................................................ 5

Data Fields............................................................................. 5

Setting the String Odometer....................................................... 5

Resetting the String Odometer.............................................. 5

Pro Settings................................................................................ 5

Device Alignment Settings..................................................... 6

Level Settings............................................................................. 6

Xero Location Settings................................................................6

Shot Dynamics Settings..............................................................6

Calibrating the Compass............................................................ 6

Adjusting the Focus.................................................................... 6

System Settings.......................................................................... 6

Changing the Units of Measure............................................. 6

Device Information......................................................... 6

Device Specifications..................................................................6

Viewing E-label Regulatory and Compliance Information.......... 6

Product Updates......................................................................... 7

Updating the Software Using a Computer............................. 7

Connecting the Device to Your Computer............................. 7

Device Care................................................................................ 7

Cleaning the Device............................................................... 7

Getting More Information............................................................ 7

Troubleshooting.......................................................................... 7

The point of impact moves between shots............................ 7

My device displays only fixed aim points............................... 7

Resetting the Device.............................................................. 7

Index................................................................................ 8

Table of Contents i

Getting Started

WARNING

Always inspect your equipment prior to shooting a crossbow. Always understand your target and what lies beyond your target before taking a shot. Failure to account for your shooting environment could cause property damage, injury, or death. You are responsible for understanding and complying with any applicable regulations for shooting a crossbow.

This device has a protective housing which, when in place, prevents human access to laser radiation in excess of the accessible emission limit (AEL) for Class 1 laser products. This device should not be modified or operated without its housing or optics. Operating this device without a housing and optics, or operating this device with a modified housing or optics that expose the laser source, may result in direct exposure to laser radiation and the risk of permanent eye damage. Removal or modification of the diffuser in front of the laser optic may result in the risk of permanent eye damage.

See the Important Safety and Product Information guide in the product box for product warnings and other important information.

Install two AAA lithium batteries in the device (Installing AAA

Batteries, page 2).

Mount the device on your crossbow (Mounting the Scope,

page 2).

Turn on the device (Turning the Device On or Off, page 3).

Adjust the eyepiece focus (Adjusting the Eyepiece,

page 3).

Follow the on-screen instructions to calibrate the device for

your crossbow (Setup Overview, page 3).

Device Overview

Ranging

button

OK (PWR)

Elevation mount adjustment

Windage mount adjustment

Adjustment lock knob

Battery cover

Battery cover latch

Remote trigger port

Hold to activate the laser range finder Press to return to hunt mode

Press to turn on the device Press to select options and configure the device

Press to decrease reticle brightness Press to move through menu items Hold to view the quick options menu

Press to increase reticle brightness Press to move through menu items Hold to view the quick options menu

Turn to adjust the scope up or down by 1/2 MOA for each click

Turn to adjust the scope left or right by 1/2 MOA for each click

Loosen to make windage and elevation adjustments Tighten to lock the adjustments

Remove to install batteries or access the micro-USB port

Move to release the battery cover

Connects to the remote trigger cable

Getting Started 1

+ 9 hidden pages