© 2000 GARMIN Corporation
GARMIN International, Inc.
1200 E 151st Street, Olathe, Kansas 66062 U.S.A.
Tel. 913/397.8200 or 800/800.1020
Fax. 913/397.8282
GARMIN (Europe) Ltd.
Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9AQ U.K.
Tel. 44/1794.519944
Fax.44/1794.519222
GARMIN (Asia) Corp.
No. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwan
Tel. 886/2.2642.9199
Fax. 886/2.2642.9099
All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated,
downloaded or stored in any storage medium, for any purpose without prior written consent of GARMIN Corporation. GARMIN
Corporation hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to
be viewed for personal use, provided that such electronic or printed copy of this manual contains the complete text of this copyright
notice and provided further that any unauthorized commercial distribution of this manual is strictly prohibited.
Information in this manual is subject to change without notice. GARMIN Corporation reserves the right to change or improve its
products and to make changes in the content without obligation to notify any person or organization of such changes. Visit the GARMIN
website for downloadable upgrades to the operating software and the Owner’s Manual. The website also contains information concerning
the use and operation of other GARMIN products.
Website address: www.garmin.com
GARMIN® is a registered trademark, MapSourceTM is a trademark of GARMIN Corporation and may not be used without the express
permission of GARMIN Corporation.
July 2000 Part Number 190-00201-00 Rev. A Printed in Taiwan
Introduction
Introduction
Thank you for choosing the GARMIN USB Data Card Programmer. To get successful results from your new programmer, take time to
read through this user’s manual in order to fully understand all of the
operating procedures.
This manual is organized into three sections:
The Introduction section provides licensing agreement information and a description of the programmer.
The Installation section introduces you to basic features and
procedures for programmer setup.
The Trouble Shooting section contains information for finding
solutions to installation and operating problems.
Standard Package Contents
! USB Data Card Programmer
! CD-ROM with USB Device Drivers for Windows 98 and
2000, and GARMIN MapSourceTM Upgrade Software
including USB Support.
! User’s Manual
! MapSource User’s Manual Addendum for the USB Data
Card Programmer
About This Manual
Minimum System Requirements
IBM-Compatible PC with Pentium processor, 16
Megabytes RAM, CD-ROM drive, Mouse or other
pointing device, 256-color display adapter (24-bit
color recommended) and monitor with 640 x 480
resolution or higher, and up to 20 Megabytes free
hard drive space. A 32 bit operating system such as
Windows 98 or Windows 2000. Universal Serial
Bus port (USB). The USB Data Card Programmer is
not designed to operate with Windows 95 or
Windows NT.
Software Requirements
Existing installation of GARMIN MapSource
upgraded to Version 3.04 or later.
Windows 95, Windows NT, Windows 98, and Windows
2000 are registered trademarks of Microsoft Corporation.
i
Introduction
Software License Agreement
THIS SOFTWARE IS OWNED BY GARMIN CORPORATION (“GARMIN”) AND IS PROTECTED UNDER COPYRIGHT LAWS AND INTERNATIONAL
COPYRIGHT TREATIES. THIS SOFTWARE IS LICENSED, NOT SOLD. THIS SOFTWARE IS PROVIDED UNDER THE FOLLOWING LICENSE
WHICH DEFINES WHAT YOU MAY DO WITH THE PRODUCT AND CONTAINS LIMITATIONS ON WARRANTIES AND/OR REMEDIES.
IMPORTANT: CAREFULLY READ THIS LICENSE BEFORE USING THIS PRODUCT. INSTALLING, COPYING, OR OTHERWISE USING THIS
PRODUCT INDICATES YOUR ACKNOWLEDGMENT THAT YOU HAVE READ THIS LICENSE AND AGREE TO ITS TERMS. IF YOU DO NOT
AGREE, RETURN THE COMPLETE PRODUCT TO GARMIN INTERNATIONAL, INC. CUSTOMER SERVICE, 1200 EAST 151st STREET, OLATHE,
KS 66062 WITHIN 10 DAYS OF THE DATE YOU ACQUIRED IT FOR A FULL REFUND.
1. LICENSE: GARMIN (“we” or “us”) provides you with storage media containing computer software (the “Program”) which may also include digital
cartographic data and ”on-line” or electronic documentation, and printed materials together called (the “Product”) and grants you a limited nonexclusive license to use the Product in accordance with the terms of this license agreement. The copyright and all other rights to the Product shall
remain with us. You must reproduce any copyright or other notice marked on the Product on all copies you make.
2. YOU MAY: a) install and use one copy of the Product on a single computer or network. This copy is to be used by only a single user at a time. If you
wish to use the Product for more users, you will need an additional license for each user.
b) make one copy of the Product for archival or backup purposes.
c) use a copy of the Production a home or portable computer if that copy is never loaded at the same time it is loaded on your primary computer.
d) transfer the Product to someone else only if you assign all of your rights under this License, cease all use of the Product, erase or destroy any copy
(including the hard disk copy) made in support of your use of the Product, and ensure that the other person agrees to the terms of this License.
3. YOU MUST NOT: a) make copies of the Product except as expressly permitted in Section 2 of this License.
b) translate, reverse engineer, decompile, or disassemble the Product except to the extent the foregoing restriction is expressly prohibited by applicable
law.
c) rent, lease, loan, sub-license, distribute, assign, or transfer the Product except as set out in Section 2 (d) above.
d) modify the Product or merge all or any part of the Product with another program.
ii