Garmin USB2 User Manual

Dynastream/011-02209-01

Dynastream Innovations

USB2 ANT Stick 011-02209-01

Quick Reference Guide

Warning

See the owner’s manual for your ANT wireless device for product warnings and other important information.

Requirements

 USB port (for optimal performance, keep the area free of clutter)
 Internet connection (for software download)
 Bring your wireless device within range (5 m) of your computer.

Step 1: Download Free Software

You must download software so that the necessary USB drivers are installed before connecting the USB ANT™
stick to your computer.

1. Turn on your computer.

2. Go to www.thisisant.com

3. Follow the on-screen instructions to download the device drivers.

Step 2: Connect USB ANT Stick

Connect the USB ANT stick to an available USB port on your computer.

Step 3: Pair and Transfer

Using ANT™ wireless technology, the USB ANT™ stick starts searching for your ANT wireless device. Follow
the on-screen instructions. After you pair the first time, your USB ANT™ stick automatically recognizes your ANT
wireless device each time it is in range.

NOTE: The pairing settings differ for each ANT wireless device model. See your owner’s manual.

Technical Specifications

 Physical size: W × H × D 2.4 × 0.7 × 0.3 in. (60 × 18 × 8.6 mm)
 Weight: 6 g
 Transmission range: Approximately 16.4 ft. (5 m)
 Operating temperature: 14°F–122°F (-10°C–50°C)

 Radio frequency/protocol: 2.4 GHz / ANT wireless communications protocol
 Power source: USB

Dynastream/011-02209-01