Garmin Mobile set up and go! for BlackBerry

Garmin Mobile

set up and go!

™

for BlackBerry

GPS receiver with Bluetooth®

wireless technology

®

© 2007 Garmin Ltd. or its subsidiaries

Garmin International, Inc.
1200 East 151st Street,
Olathe, Kansas 66062, USA
Tel. [phone] or

[phone]

Fax [phone]

Garmin (Europe) Ltd.
Liberty House, Hounsdown Business Park,
Southampton, Hampshire, SO40 9RB UK
Tel. [phone] (outside the UK)

0808.2380000 (within the UK)

Fax [phone]

Garmin Corporation
No. 68, Jangshu 2nd Road,
Shijr, Taipei County,
Taiwan
Tel. [phone]
Fax [phone]

All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated,
downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants
permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed and to print one
copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual must contain the complete text
of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly
prohibited.

Information in this document is subject to change without notice. Garmin reserves the right to change or improve its products and to make
changes in the content without obligation to notify any person or organization of such changes or improvements. Visit the Garmin Web site
(www.garmin.com) for current updates and supplemental information concerning the use and operation of this and other Garmin products.

Garmin® is a trademark of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. Garmin Mobile™, Garmin Online™,
myGarmin™, and PeerPoints™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express
permission of Garmin.

SiRF, SiRFstar and the SiRF logo are registered trademarks of SiRF Technology, Inc. SiRFstarIII and SiRF Powered are trademarks of SiRF
Technology, Inc.

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks
by Garmin is under license. Other trademarks and trade names are those of their respective owners.

The RIM and BlackBerry device families of related marks, images, and symbols are the exclusive
properties of and trademarks or registered trademarks of Research In Motion Limited—used by
permission.

April 2007 Part Number 190-00707-16 Rev. B Printed in Taiwan

Contents of Your Garmin Mobile™ for BlackBerry® Package

GPS 10x receiver with Bluetooth® wireless

•

technology

3.7 Volt Lithium-ion battery

•

Belt clip that makes your GPS 10x receiver

•

completely portable

Vehicle power cable to power and charge the

•

GPS 10x receiver in your vehicle
Purchase certicate with purchase code

•

Looking at the GPS 10x Receiver

Power LED Bluetooth LED

Install the Navigation Software

➊

Go to www.garmin.com/blackberry.

1.
Sign in to your myGarmin™ account (or create one

2.
if you do not have one) and enter the purchase

code listed on the purchase certicate that came in

the product box.
Enter the information for your BlackBerry device,

3.
and click Activate.

Write down the activation code that is generated.

4.

Within a few hours, a Web address (link) is sent to your
BlackBerry device. As you wait for the Web address,
install the battery and follow the rest of the steps in this
guide.

Power button

Mini-USB

connector for

power cable

Garmin Mobile™ for BlackBerry® set up and go! 1

Install the Battery

➋

WARNING: This product contains a lithium-ion battery. See the

page 9 for important battery safety information.

Locate the black or gray lithium-ion battery that

1.
came in the product box.

With your thumbnail, slide the battery cover

2.
release tab toward the end of the GPS 10x.

Pull the battery cover off.

3.

Locate the metal contacts on the end of the

4.
lithium-ion battery. Insert the battery so the metal
contacts on the battery match up with the metal
contacts inside the battery compartment. Press the
battery down into place.

Replace the battery cover by inserting the tabs into

5.
the notches. Press the battery cover closed; the
release tab locks the cover in place.

➌

1.

2.

You can use the GPS 10x receiver while you are
charging it. It takes about four hours to charge the
battery. A fully charged battery lasts about 22 hours.

Battery

cover

Release tab

➍

To turn on the GPS 10x receiver, press and hold the
Power button on the top of the GPS 10x receiver.

Lithium-ion

battery

Bluetooth LED Status

•

•

Replacement Battery

If you need to replace the battery, use a Garmin 3.7
Volt lithium-ion battery pack (010-10840-00). Purchase
a replacement battery at http://my.garmin.com/shop.
You can also use a compatible cell phone battery, such
as a Nokia BL-5C.

Power LED Status

•

•

•

•

Charge the GPS 10x Receiver

Plug the small end of the power cable into the
mini-USB connector on the end of the GPS 10x.

Plug the other end of the power cable into an
available power outlet in your vehicle.

Turn On the GPS 10x Receiver

Rapid Flashing Blue: power on, Bluetooth on
Slow Flashing Blue: Bluetooth link to your

BlackBerry device established

Flashing Yellow Green: charging in progress
Solid Yellow Green: battery is charged
Flashing Orange: low battery
Solid Orange: faulty battery or system error

2 Garmin Mobile™ for BlackBerry® set up and go!

If the GPS 10x receiver has not established a
Bluetooth connection for several minutes, it turns off
automatically.

To manually turn the GPS 10x receiver off, press and
hold the Power button.

For instructions about pairing and Bluetooth, refer to
your BlackBerry device’s documentation.

The GPS 10x receiver and your BlackBerry device
automatically connect when they are both turned on
and within 10 meters (about 30 feet) of each other.

Pair the GPS 10x Receiver

➎

Bluetooth wireless technology establishes a wireless
link between your BlackBerry device and the GPS 10x
receiver. Before you can use the GPS 10x receiver, you
must “pair” it with your BlackBerry device.

Make sure your BlackBerry device and GPS 10x

1.
receiver are turned on and within 10 meters (about
30 feet) of each other.

Enable your BlackBerry device’s Bluetooth

2.
component. This might be in Options > Bluetooth
or Settings > Bluetooth.

Initiate a search for Bluetooth devices.

3.
Select GPS 10x from the list of devices.

4.
Enter the GPS 10x receiver’s Bluetooth passkey

5.
(1234) into your BlackBerry device.

Garmin Mobile™ for BlackBerry® set up and go! 3

Complete the Software

➏

Installation

Follow the link on your BlackBerry device to

1.
download the Garmin Mobile software.

Open the Garmin Mobile application on your

2.
BlackBerry device.

Follow the on-screen directions to test the

3.
Bluetooth connection.

To activate the software, enter the activation code

4.
(from step 3 of ➊ Install the Navigation Software
on page 1) .

If you have lost your activation code, sign in to your
myGarmin account at http://my.garmin.com. Click

Garmin Mobile for BlackBerry, and then click
Regenerate Activation Code

.

Adjusting Your BlackBerry Device’s Volume

You may have to adjust the volume and/or the prole

settings on your BlackBerry device to maximize the
audio output of Garmin Mobile. See your BlackBerry
device’s documentation for more details.

Acquire Satellite Signals

➐

Open the Garmin Mobile
application. Check that the blue
Bluetooth LED on the GPS

10x receiver is slowly ashing,

indicating a wireless connection
has been established. Move to an
open area, out of parking garages,
and away from tall buildings.

Acquiring satellite signals may
take a few minutes. Select View
Map to open the map. When
the status bar displays Ready to

Navigate

navigate you to your destination.

4 Garmin Mobile™ for BlackBerry® set up and go!

, Garmin Mobile can

Main menu

Ready to navigate

Use Garmin Mobile

➑

Garmin Mobile allows you to nd a destination and

then automatically create a route to it. You can also

view trafc, weather conditions, and fuel prices.

Where To?

The Where To menu allows you to

nd a destination using one of the

categories, such as address, food,
lodging, fuel, and attractions.

Find an Address

Select Where To > Address.

1.
Select the state/region.

2.
Enter the street number and street name, and then

3.
select OK.

Select the appropriate address to open the

4.
information page.

Select Start Navigating to create a route to this

5.
location.

The map opens. Turn-by-turn directions are provided
as you drive.

Where To menuWhere To menu