Garmin OTR810, OTR1010, LGV810, LGV1010 User manual [EN]

DĒZL™ OTR810 / OTR1010 /

LGV810 / LGV1010

Owner’s Manual

© 2022 Garmin Ltd. or its subsidiaries

All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or
improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to

www.garmin.com for current updates and supplemental information concerning the use of this product.

Garmin® and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not be used without the express
permission of Garmin.

BC™, dēzl™, Garmin eLog™, Garmin Express™, and myTrends™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission
of Garmin.

Android™ is a trademark of Google LLC. Apple® and Mac® are trademarks of Apple Inc, registered in the U.S. and other countries. The Bluetooth® word mark and logos are owned by
the Bluetooth SIG, Inc., and any use of such word mark or logo by Garmin is under license. microSD® and the microSDHC logo are trademarks of SD-3C, LLC. Love's® and Love's
Travel Stops® are registered trademarks of Love's Travel Stops & Country Stores, Inc. Pilot Flying J™ and Pilot Flying J Travel Centers™ are trademarks of Pilot Travel Centers LLC
and its affiliate companies. PrePass® is a trademark of the PrePass Safety Alliance. Tripadvisor® is a registered trademark of TripAdvisor LLC. TruckDown® is the trademark of
TruckDown Info International, Inc. Windows® is a registered trademark of Microsoft Corporation in the United States and other countries. Wi‑Fi® and Wi‑Fi CERTIFIED MiraCast™ are
registered marks of Wi-Fi Alliance Corporation.

Table of Contents

Getting Started................................. 1

Device Overview...................................... 1

Mounting and Powering the Device in

Your Vehicle.............................................3

Installing the Screw-Down Mount on

the Dashboard..................................... 6

Installing the Ball Mount Adapter....... 8

Turning the Device On or Off.................. 9

Acquiring GPS Signals............................ 9

Home Screen......................................... 10

Opening an App................................. 10

Adding Shortcuts to the Home

Screen................................................ 11

Viewing Notifications........................ 11

Status Bar Icons................................ 11

Using the Touchscreen......................... 11

Adjusting the Screen Brightness.......... 11

Vehicle Profiles.............................. 12

Adding a Vehicle Profile....................... 12

Car Profile.............................................. 12

Switching the Vehicle Profile................12

Changing Your Trailer Information...... 13

Editing a Vehicle Profile........................ 13

Driver Awareness Features and

Alerts............................................. 14

Enabling or Disabling Driver Alerts.......14

Red Light and Speed Cameras............. 15

Finding and Saving Locations......... 15

Points of Interest...................................15

Finding Trucking Points of Interest......15

Finding a Location Using the Search

Bar.......................................................... 16

Finding an Address............................... 16

Finding a Location by Category............16

Searching Within a Category............ 16

Location Search Results....................... 17

Changing the Search Area.................... 18

Custom Points of Interest.................... 18

Installing POI Loader......................... 18

Finding Custom POIs........................ 18

Parking................................................... 19

Finding Truck Parking....................... 19

Finding Truck Parking in Europe...... 19

Finding Parking Near Your Current

Location............................................. 19

Search Tools..........................................19

Finding an Intersection..................... 19

Finding a Location Using

Coordinates....................................... 19

Tripadvisor.............................................19

Finding Tripadvisor Points of

Interest............................................... 20

Viewing Recently Found Locations...... 20

Clearing the List of Recently Found

Locations........................................... 20

Viewing Current Location

Information............................................ 20

Finding Emergency Services and

Fuel..................................................... 20

Getting Directions to Your Current

Location............................................. 20

Adding a Shortcut................................. 20

Removing a Shortcut......................... 21

Saving Locations................................... 21

Saving a Location.............................. 21

Saving Your Current Location........... 21

Editing a Saved Location.................. 21

Assigning Categories to a Saved

Location............................................. 21

Deleting a Saved Location................ 22

Navigating to Your Destination....... 22

Routes.................................................... 22

Starting a Route.....................................22

Starting a Route by Using the Map...22

Going Home....................................... 22

Your Route on the Map......................... 23

Active Lane Guidance....................... 25

Viewing Popular Truck Paths on the

Map.................................................... 25

Viewing Turns and Directions...........25

Viewing the Entire Route on the

Map.................................................... 25

Planning Your Arrival............................ 26

Arriving at Your Destination................. 26

Completing a Truck Route................ 26

Parking Near Your Destination......... 27

Changing Your Active Route.................27

Adding a Location to Your Route..... 27

Shaping Your Route...........................27

Table of Contents i

Taking a Detour................................. 28

Changing the Route Calculation

Mode.................................................. 28

Stopping the Route............................... 28

Using Suggested Routes...................... 28

Avoiding Delays, Tolls, and Areas........ 28

Avoiding Traffic Delays on Your

Route.................................................. 28

Avoiding Road Features.................... 28

Avoiding Environmental Zones........ 28

Custom Avoidances.......................... 29

Using the Map................................ 29

Map Tools.............................................. 30

Viewing a Map Tool...........................30

Up Ahead............................................... 30

Viewing Upcoming Locations........... 31

Customizing the Up Ahead

Categories..........................................31

Cities Ahead.......................................... 31

Viewing Upcoming Cities and Exit

Services..............................................31

Warning and Alert Symbols.................. 31

Restriction Warnings......................... 32

Road Condition Warnings................. 32

Alerts.................................................. 33

Trip Information.................................... 33

Viewing Trip Data from the Map...... 33

Viewing Your Trip History................. 33

Resetting Trip Information................33

Viewing Upcoming Traffic.................... 33

Viewing Traffic on the Map.............. 33

Searching for Traffic Incidents......... 34

Customizing the Map............................ 34

Customizing the Map Layers............ 34

Changing the Map Data Field........... 34

Changing the Map Perspective........ 34

Live Services, Traffic, and

Smartphone Features..................... 34

Pairing with Your Smartphone............. 35

Tips After Pairing the Devices.......... 35

Pairing Additional Bluetooth

Devices...............................................35

Going to an Address or Location Using

the dēzl App........................................... 35

Smart Notifications............................... 36

Receiving Notifications..................... 36

Hands-Free Calling................................ 36

Placing a Call..................................... 36

Receiving a Call................................. 36

Using In-Call Options......................... 37

Saving a Phone Number as a

Preset................................................. 37

Wireless Headsets................................ 37

Enabling or Disabling Bluetooth

Features................................................. 37

Showing or Hiding App Notifications

(Android™)..........................................37

Showing or Hiding Notification

Categories for Your Apple®

Device.................................................37

Disconnecting a Bluetooth Device....... 37

Deleting a Paired Bluetooth Device......38

Deleting a Paired Phone....................... 38

Traffic............................................ 38

Receiving Traffic Data Using Your

Smartphone........................................... 38

Viewing Traffic on the Map.................. 38

Searching for Traffic Incidents......... 38

photoLive Traffic Cameras................... 38

Viewing and Saving photoLive Traffic

Cameras.............................................39

Saving a Traffic Camera................... 39

Vehicle and Driver Tools................. 39

Break Planning...................................... 39

Taking a Suggested Break................ 39

Starting the Break Timer................... 39

Pausing and Resetting the Break

Timer.................................................. 40

Adjusting Drive Hours....................... 40

Adjusting the Daily Driving Limit...... 40

IFTA........................................................ 40

Entering Fuel Data............................. 40

Editing Fuel Data............................... 41

Viewing and Exporting a Jurisdiction

Summary............................................ 41

Editing and Exporting Trip Reports.. 41

Viewing Exported Jurisdiction

Summaries and Trip Reports............ 41

Logging Service History........................ 42

Adding Service Categories............... 42

Deleting Service Categories..............42

ii Table of Contents

Renaming Service Categories.......... 42

Deleting Service Records.................. 42

Editing a Service Record................... 42

PrePass®...............................................43

Loyalty Programs.................................. 43

Garmin eLog................................... 43

Setting Up Your Garmin eLog

Adapter.................................................. 43

Transferring Garmin eLog Data from

Another Device...................................... 43

Backing Up Data................................ 44

Restoring Data................................... 44

Daily Operation Guidelines................... 44

Starting a Drive...................................... 44

Garmin eLog App Overview.............. 45

Garmin eLog Map Tool Overview..... 46

Driving in a Team...............................47

Changing Duty Status....................... 47

Viewing Hours of Service..................48

Recording Adverse Conditions......... 48

Reviewing Logs................................. 48

Certifying Daily Logs......................... 48

Submitting a Daily Log...................... 48

Exporting and Saving a Record of Duty

Status (RODS) Report........................49

Recording Trailers and Shipments... 49

Roadside Inspection............................. 49

Viewing Inspection Information....... 49

Transferring Data to an Inspector

Using Web Services...........................49

Transferring Data to an Inspector

Using Email........................................ 49

Transferring Data to an Inspector

Using a USB Device........................... 50

Transferring Data to an Inspector

Using Bluetooth Wireless

Technology........................................ 50

Diagnostics and Malfunctions............. 50

Viewing Diagnostics and

Malfunctions......................................51

Diagnostic Definitions....................... 51

Malfunction Definitions.....................52

Administrator Functions....................... 53

Adding Driver Profiles....................... 53

Editing a Driver Profile...................... 53

Clearing Garmin eLog App Data....... 54

Voice Command............................. 54

Tips for Speaking to the Device........... 54

Launching Garmin Voice-Activated

Navigation............................................. 54

Checking Your Arrival Time.................. 54

Placing a Phone Call Using Your

Voice...................................................... 54

Changing Device Settings Using Your

Voice...................................................... 55

Using the Apps............................... 55

Viewing the Owner's Manual on

Your Device............................................55

Viewing the Truck Map......................... 55

Route Planner........................................ 55

Planning a Route............................... 55

Editing and Reordering Locations in a

Route.................................................. 56

Changing Routing Options for a

Route.................................................. 56

Navigating to a Saved Route............ 56

Editing and Saving Your Active

Route.................................................. 56

Viewing Previous Routes and

Destinations.......................................... 56

Viewing the Weather Forecast............. 56

Viewing Weather Near a Different

City..................................................... 57

Music Player.......................................... 57

Adding the Music Player Tool to the

Map.................................................... 57

Garmin PowerSwitch™ App.................. 58

Activating a Power Switch................ 58

Turning Off All Switches................... 58

Customizing a Button....................... 59

Assigning a Switch to a Control

Input................................................... 59

Adding a Custom Layout.................. 59

Routines............................................. 60

Settings..........................................61

Navigation Settings............................... 61

Map and Vehicle Settings..................... 62

Enabling Maps................................... 62

Connecting to a Wireless Network.......62

Enabling Bluetooth Wireless

Technology............................................ 62

Table of Contents iii

Driver Assistance Settings................... 62

Traffic Settings...................................... 62

Display Settings.....................................63

Sound and Notification Settings.......... 63

Adjusting Sound and Notification

Volume............................................... 63

Enabling or Disabling Location

Services................................................. 63

Setting the Text Language....................63

Date and Time Settings........................ 63

Device Settings......................................64

Device Information......................... 64

Viewing E-label Regulatory and

Compliance Information....................... 64

Specifications........................................64

Charging the Device.............................. 64

Device Maintenance....................... 64

Garmin Support Center......................... 64

Updating Maps and Software Using a

Wi‑Fi Network........................................ 65

Updating Maps and Software with

Garmin Express..................................... 66

Installing Garmin Express................. 67

Device Care............................................67

Cleaning the Outer Casing................ 67

Cleaning the Touchscreen................ 67

Avoiding Theft................................... 67

Resetting the Device............................. 68

Removing the Device, Mount, and

Suction Cup........................................... 68

Removing the Mount from the Suction

Cup..................................................... 68

Removing the Suction Cup from the

Windshield......................................... 68

My device does not connect to my

phone..................................................... 69

Appendix........................................ 69

Garmin PowerSwitch............................ 69

Mounting Considerations................. 69

Mounting the Device......................... 70

Opening the Front Cover................... 71

Connecting Accessories................... 72

Connecting a Control Input............... 73

Connecting the Device to Vehicle

Power................................................. 73

Pairing with a Garmin Navigation

Device.................................................74

Garmin PowerSwitch

Specifications.................................... 74

Troubleshooting................................ 74

Wireless Cameras................................. 75

Pairing a BC™ 50 Backup Camera with

a Garmin Navigation Device............. 75

Connecting a Wired Backup

Camera...............................................76

Viewing the Backup Camera............ 76

Connecting a Dash Camera to the

Powered Mount..................................... 77

Data Management................................ 77

About Memory Cards........................ 78

Installing a Memory Card for Maps

and Data............................................. 78

Formatting the Memory Card........... 78

Connecting the Device to Your

Computer........................................... 78

Transferring Data From Your

Computer........................................... 78

Purchasing Additional Maps................ 78

Purchasing Accessories....................... 78

Troubleshooting............................. 68

The suction cup will not stay on my

windshield..............................................68

The mount does not hold my device in

place while I drive..................................68

My device is not acquiring satellite

signals....................................................68

The device does not charge in my

vehicle.................................................... 68

My battery does not stay charged for

very long................................................ 69

iv Table of Contents

Getting Started

WARNING

See the Important Safety and Product Information guide in the product box for product warnings and other
important information.

• Update the maps and software on your device (Updating Maps and Software Using a Wi‑Fi Network,

page 65).

• Mount the device in your vehicle and connect it to power (Mounting and Powering the Device in Your Vehicle,

page 3).

• Adjust the volume (Adjusting Sound and Notification Volume, page 63) and display brightness (Adjusting the

Screen Brightness, page 11).

• Set up a vehicle profile for your truck (Adding a Vehicle Profile, page 12).

• Navigate to your destination (Starting a Route, page 22).

Device Overview

Getting Started 1

Microphone for hands-free calling and voice command

Volume control

Power key

USB power and data port

Map and data memory card slot

Magnetic mount interface with 14-pin connector

Speaker

2 Getting Started

Mounting and Powering the Device in Your Vehicle

WARNING

This product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage
caused by battery exposure to extreme heat, store the device out of direct sunlight.

Both the device and its mount contain magnets. Under certain circumstances, magnets may cause interference
with some internal medical devices and electronic devices, including pacemakers, insulin pumps, or hard drives
in laptop computers. Keep the device away from medical devices and electronic devices.

Before you use your device on battery power, you should charge it.
1 Open the lever , press the suction cup to the windshield, and flip the lever back toward the windshield.

The lever must be oriented toward the top of the windshield.

2 Plug the vehicle power cable into the port on the mount.

Getting Started 3

3 If necessary, loosen the thumbscrew on the suction cup arm and the nut on the ball mount , and adjust

the mount for better viewing and operation.

4 Tighten the thumbscrew on the suction cup arm and the nut on the ball mount.

4 Getting Started

5 Place the device onto the magnetic mount.

6 Plug the other end of the vehicle power cable into a power outlet in your vehicle.

Getting Started 5

Installing the Screw-Down Mount on the Dashboard

Before you can attach the screw-down ball mount to your dashboard, you must select a suitable location on the
dashboard.

WARNING

It is your responsibility to ensure the mounting location complies with all applicable laws and ordinances, and
does not block your view of the road during the safe operation of your vehicle.

NOTICE

Avoid wires, gauges, air bags, air bag covers, HVAC, and other items when drilling pilot holes and attaching the
mount to the vehicle. Garmin® is not responsible for any damages or consequences arising from the installation.

NOTICE

To avoid possible damage to your vehicle, Garmin recommends professional installation of the screw-down ball
mount.

1 Place the mount on the selected location.

2 Using the mount as a template, mark the three screw locations.
3 Drill pilot holes (optional).

For some types of mounting material, drilling pilot holes is necessary.

4 Securely fasten the mount to the surface using the supplied screws .

6 Getting Started

5 Insert the ball mount arm into the mount.

6 Insert the thumbscrew into the mount, and tighten it to secure the ball mount arm.

Getting Started 7

Installing the Ball Mount Adapter

Your device includes a one-inch ball mount that is compatible with third-party mounting solutions.

1 Remove the four screws securing the mount socket to the magnetic mount.

2 Remove the mount socket.
3 Secure the one-inch ball mount to the magnetic mount using the screws removed in step 1.

8 Getting Started

Turning the Device On or Off

• To turn the device on, press the power key , or connect the device to power.

• To put the device in power saving mode, press the power key while the device is on.
While in power saving mode, the screen is off and the device uses very little power, but it can wake instantly

for use.
TIP: You can charge your device faster by putting it in power saving mode while charging the battery.

• To turn off the device completely, hold the power key until a prompt appears on the screen, and select Power
off.

Acquiring GPS Signals

When you turn on your navigation device, the GPS receiver must collect satellite data and establish the current
location. The time required to acquire satellite signals varies based on several factors, including how far you are
from the location where you last used your navigation device, whether you have a clear view of the sky, and how
long it has been since you last used your navigation device. The first time you turn on your navigation device, it
may take several minutes to acquire satellite signals.

1 Turn on the device.
2 Verify appears in the status bar, and enable location services if it does not (Enabling or Disabling Location

Services, page 63).

3 If necessary, go to an open area with a clear view of the sky, away from tall buildings and trees.

Acquiring Satellites appears at the top of the navigation map until the device determines your location.

Getting Started 9

Home Screen

NOTE: The home screen layout may vary if it has been customized.

Swipe down to view notifications.
Swipe down twice to quickly change settings and backlight brightness.

Select to start a route.

Select to view the map.

Select to change your vehicle profile.

Select to view weather information for your current location. The dēzl app is required.

Select to view smart notifications. The dēzl app is required.

Select to open the app drawer. The app drawer contains shortcuts to all the apps installed on your device.

Hold to customize the wallpaper or add widgets to the home screen.

Opening an App

The home screen contains shortcuts for frequently used apps. The app drawer contains all the apps installed on
your device, organized into two tabs. The dēzl tab contains Garmin apps useful for navigation and hours of
service recording. The Tools tab contains apps useful for communication and other tasks.

Select an option to open an app:

• Select an app shortcut from the home screen.

• Select , select a tab, and select an app.

10 Getting Started

Adding Shortcuts to the Home Screen

1 Select .
2 Select an app tab to view additional applications.
3 Hold an application, and drag it to a location on the home screen.

Viewing Notifications

WARNING

Do not read or interact with notifications while driving, because doing so can cause distraction that could lead
to an accident resulting in serious personal injury or death.

1 Swipe down from the top of the screen.

The list of notifications appears.

2 Select an option:

• To launch the action or app mentioned in the notification, select the notification.

• To dismiss a notification, swipe the notification to the right.

Status Bar Icons

The status bar is located at the top of the main menu. The status bar icons display information about features
on the device.

Location services is enabled (Enabling or Disabling Location Services, page 63).

Bluetooth® technology is enabled.

Connected to a Bluetooth device.

Connected to a Wi‑Fi® network (Connecting to a Wireless Network, page 62).

Active vehicle profile. Swipe down twice and select to view the vehicle profile settings (Vehicle Profiles,

page 12).

Battery charge level.

dēzl app connection status (Pairing with Your Smartphone, page 35)

Using the Touchscreen

• Tap the screen to select an item.

• Drag or swipe your finger across the screen to pan or scroll.

• Pinch two fingers together to zoom out.

• Spread two fingers apart to zoom in.

Adjusting the Screen Brightness

You can adjust the brightness manually, using either the notification panel or the settings menu.
1 Select an option:

• Swipe down twice from the top of the screen to expand the quick settings in the notification panel.

• Select Settings > Device > Display > Brightness level.

2 Use the slider bar to adjust the brightness.

Getting Started 11

Vehicle Profiles

WARNING

Entering your vehicle profile characteristics does not guarantee that your vehicle's characteristics will be
accounted for in all route suggestions or that you will receive the warning icons in all cases. Limitations may
exist in the map data such that your device cannot account for these restrictions or road conditions in all cases.
Always defer to all posted road signs and road conditions when making driving decisions.

Routing and navigation are calculated differently based on your vehicle profile. The activated vehicle profile is
indicated by an icon in the status bar. The navigation and map settings on your device can be customized
separately for each vehicle type.

When you activate a truck vehicle profile, the device avoids including restricted or impassable areas in routes
based on the dimensions, weight, and other characteristics you entered for your vehicle.

Adding a Vehicle Profile

You can add a vehicle profile that includes the weight, dimensions, and other characteristics for your vehicle.

1 From the home screen, select the vehicle profile widget (Home Screen, page 10).
2 Select an option:

• To add a straight truck with a permanently attached cargo area, select Straight Truck.

• To add a tractor or a tractor-trailer combination, select Tractor.

• To add a bus, select Bus.
3 Follow the on-screen instructions to enter the vehicle characteristics.
After you add a vehicle profile, you can edit the profile to enter additional detailed information, such as the

vehicle identification number or trailer number (Editing a Vehicle Profile, page 13).

Car Profile

The car profile is a preloaded vehicle profile intended for use in an automobile without a trailer. While using the
car profile, the device calculates standard automobile routes, and routing for large vehicles is not available.
Some features and settings specific to large vehicles are not available while using the car profile.

Switching the Vehicle Profile

Each time you turn on your device, it prompts you to select a vehicle profile. You can manually switch to another
vehicle profile at any time.

1 Select an option:

• Swipe down twice from the top of the screen, and select the vehicle profile icon, such as or .

• From the home screen, select the vehicle profile widget (Home Screen, page 10).
2 Select a vehicle profile.

The vehicle profile information appears, including measurements and weight.

3 Select Select.

12 Vehicle Profiles

Changing Your Trailer Information

Before you can change your trailer information, you must enter a vehicle profile for a tractor (Adding a Vehicle

Profile, page 12).

When you change the trailer on your tractor, you can change the trailer information in your vehicle profile
without changing the tractor information. You can switch quickly between frequently used trailers.

1 From the home screen, select the vehicle profile widget (Home Screen, page 10).
2 Select the tractor vehicle profile to use with the trailer.
3 Select .
4 Select an option:

• To use a recent trailer configuration, select a trailer configuration from the list.

• To enter a new trailer configuration, select New Configuration, and enter the trailer information.

Editing a Vehicle Profile

You can edit a vehicle profile to change vehicle information or to add detailed information to a new vehicle
profile, such as the vehicle identification number, trailer number, or odometer reading. You can also rename or
delete a vehicle profile.

1 From the home screen, select the vehicle profile widget (Home Screen, page 10).
2 Select the vehicle profile to edit.
3 Select an option:

• To edit the vehicle profile information, select , and select a field to edit.

• To rename a vehicle profile, select > > Rename Profile.

• To delete the vehicle profile, select > > Delete.

Vehicle Profiles 13

Driver Awareness Features and Alerts

CAUTION

The driver alerts and speed limit features are for information only and do not replace your responsibility to abide
by all posted speed limit signs and to use safe driving judgment at all times. Garmin is not responsible for any
traffic fines or citations you receive for failing to follow all applicable traffic laws and signs.

Your device provides features that can help encourage safer driving and increase efficiency, even when you are
driving in a familiar area. The device plays an audible tone or message and displays information for each alert.
You can enable or disable the audible tone for some types of driver alerts. Not all alerts are available in all areas.

Schools: The device plays a tone and displays the speed limit (if available) for an upcoming school or school

zone.

Speed limit exceeded: The device displays a red border on the speed limit icon when you exceed the posted

speed limit for the current road.

Speed limit reduced: The device plays a tone and displays the upcoming speed limit so you can be prepared to

adjust your speed.

Railroad crossing: The device plays a tone to indicate an upcoming railroad crossing.
Animal crossing: The device plays a tone to indicate an upcoming animal crossing area.
Curves: The device plays a tone to indicate a bend in the road.
Slower traffic: The device plays a tone to indicate slower traffic when you approach slower traffic at a higher

speed. Your device must be receiving traffic information to use this feature (Traffic, page 38).

Construction zone: The device plays a tone and displays a message when you approach a construction zone.
Lane closure: The device plays a tone and displays a message when you approach a lane closure.
Break planning: The device plays a tone and suggests upcoming rest stops after you have been driving for a

long time.

No trucks allowed: The device plays a tone when you approach a road where no trucks are allowed.
Risk of grounding: The device plays a tone and displays a message when you approach a road where your

vehicle could become grounded.

Lateral wind: The device plays a tone and displays a message when you approach a road where there is risk of

lateral wind.

Narrow road: The device plays a tone and displays a message when you approach a road that may be too

narrow for your vehicle.

Steep hill: The device plays a tone and displays a message when you approach a steep hill.
State and country borders: The device plays a tone and displays a message when you approach the border of a

state or country.

Enabling or Disabling Driver Alerts

You can enable or disable several types of driver alerts.

1 Select Settings > Driver Assistance > Driver Alerts.
2 Select or clear the check box next to each alert.

14 Driver Awareness Features and Alerts

Red Light and Speed Cameras

NOTICE

Garmin is not responsible for the accuracy of or the consequences of using a red light or speed camera
database.

NOTE: This feature is not available for all regions or product models.
Information about red light and speed camera locations is available in some areas for some product models.

The device alerts you when you approach a reported speed or red light camera.

• In some areas, your device can receive red light and speed camera data while connected to a smartphone

running the dēzl app.

• You can use the Garmin Express™ software (garmin.com/express) to update the camera database stored on

your device. You should update your device frequently to receive the most up-to-date camera information.

Finding and Saving Locations

The maps loaded in your device contain locations, such as restaurants, hotels, auto services, and detailed street
information. The Where To? menu helps you find your destination by providing several methods to browse,
search, and save this information.

From the main menu, select Where To?.

• To quickly search all locations on your device, select Search (Finding a Location Using the Search Bar,

page 16).

• To find an address, select Address (Finding an Address, page 16).

• To browse or search pre-loaded points of interest by category, select Categories (Finding a Location by

Category, page 16).

• To search near a different city or area, select next to the current search area (Changing the Search Area,

page 18).

• To view and edit your saved locations, select Saved (Saving Locations, page 21).

• To view locations you have recently selected from the search results, select Recent (Viewing Recently Found

Locations, page 20).

• To search for truck stops and services, select Categories > Trucking (Finding Trucking Points of Interest,

page 15).

• To browse and search Tripadvisor® traveler ratings, select Tripadvisor (Tripadvisor, page 19).

• To navigate to specific geographic coordinates, select Coordinates (Finding a Location Using Coordinates,

page 19).

Points of Interest

NOTICE

You are responsible for understanding and complying with any applicable rules, laws, or regulations associated
with points of interest.

A point of interest is a place that you may find useful or interesting. Points of interest are organized by category
and can include popular travel destinations such as gas stations, restaurants, hotels, and entertainment venues.

Finding Trucking Points of Interest

NOTICE

You are responsible for understanding and complying with any applicable rules, laws, or regulations associated
with points of interest.

The detailed maps loaded in your device contain trucking points of interest, such as truck stops, rest areas, and
weigh stations.

Select Where To? > Categories > Trucking.

Finding and Saving Locations 15

Finding a Location Using the Search Bar

You can use the search bar to search for locations by entering a category, brand name, address, or city name.

1 Select Where To?.
2 Select Search in the search bar.
3 Enter all or part of the search term.

Suggested search terms appear below the search bar.

4 Select an option:

• To search for a type of business, enter a category name (for example, "movie theaters").

• To search for a business name, enter all or part of the name.

• To search for an address near you, enter the house number and street name.

• To search for an address in another city, enter the house number, street name, city, and state.

• To search for a city, enter the city and state.

• To search for coordinates, enter latitude and longitude coordinates.
5 Select an option:

• To search using a suggested search term, select the term.

• To search using the text you entered, select .
6 If necessary, select a location.

Finding an Address

NOTE: The order of the steps may change depending on the map data loaded on your device.
1 Select Where To?.
2 If necessary, select to search near a different city or area.
3 Select Address.
4 Follow the on-screen instructions to enter address information.
5 Select the address.

Finding a Location by Category

1 Select Where To?.
2 Select a category, or select Categories.
3 If necessary, select a subcategory.
4 Select a location.

Searching Within a Category

After you have performed a search for a point of interest, certain categories may display a Quick Search list that
shows the last four destinations you selected.

1 Select Where To? > Categories.
2 Select a category.
3 Select an option:

• Select a destination from the quick search list on the right side of the screen.

The quick search list provides a list of recently found locations in the selected category.

• Select a subcategory, if necessary, and select a destination.

16 Finding and Saving Locations

Location Search Results

The location search results appear in a list, with the nearest location at the top. Each numbered location also
appears on the map. You can scroll down to view more results.

Go!

Plan Arrival

Select a location to view the option menu.

Select to view detailed information about the location.

Select to start navigating to the location using the recommended route.

Select to view a map of your destination and find a truck destination.

Select to view alternate routes to the location.

Finding and Saving Locations 17

Changing the Search Area

By default, the device searches for locations near your current location. You can also search other areas, such
as near your destination, near another city, or along your active route.

1 Select Where To?.
2 Select next to the current search area .

3 Select a search area.
4 If necessary, follow the on-screen instructions to select a specific location.

The selected search area appears next to . When you search for a location using any of the options in the
Where To? menu, the device suggests locations near this area first.

Custom Points of Interest

Custom POIs are customized points on the map. They can contain alerts that let you know if you are near a
designated point or if you are traveling faster than a specified speed.

Installing POI Loader

You can create or download custom POI lists on your computer and install them on your device using POI
Loader software.

1 Go to www.garmin.com/poiloader.
2 Follow the on-screen instructions.

Finding Custom POIs

Before you can find custom POIs, you must load custom POIs on your device using the POI Loader software
(Installing POI Loader, page 18).

1 Select Where To? > Categories.
2 Scroll to the Other Categories section, and select a category.

18 Finding and Saving Locations

Parking

Finding Truck Parking

1 Select Where To? > Categories > Trucking > Truck Parking.
2 Select a parking location.
3 Select Go!.

Finding Truck Parking in Europe

1 Select Where To? > Truck Parking Europe.
2 If necessary, select Filter by Amenities & Brands, select one or more attributes, and select Search.
3 Select a parking location.
4 Select Go!.

Finding Parking Near Your Current Location

1 Select Where To? > Categories > Parking.
2 Select Filter Parking, and select one or more categories to filter parking by availability, type, price, or

payment methods (optional).

NOTE: Detailed parking data is not available in all areas or for all parking locations.
3 Select a parking location.
4 Select Go!.

Search Tools

Search tools allow you to search for specific types of locations by responding to on-screen prompts.

Finding an Intersection

You can search for an intersection or junction between two streets, highways, or other roads.

1 Select Where To? > Intersections.
2 Follow the on-screen instructions to enter street information.
3 Select the intersection.

Finding a Location Using Coordinates

You can find a location using latitude and longitude coordinates. This can be helpful when geocaching.

1 Select Where To? > Coordinates.
2 If necessary, select , and change the coordinate format or datum.
3 Enter the latitude and longitude coordinates.
4 Select View on Map.

Tripadvisor

NOTICE

Garmin is not responsible for the accuracy or timeliness of the Tripadvisor information.
You are responsible for understanding and complying with any applicable rules, laws, or regulations associated

with points of interest.

Your device includes Tripadvisor traveler ratings. Tripadvisor ratings appear automatically in the search results
list for restaurants, hotels, and attractions. You can also search for nearby Tripadvisor points of interest and
sort by distance or popularity.

Finding and Saving Locations 19

Finding Tripadvisor Points of Interest

1 Select Where To? > Tripadvisor.
2 Select a category.
3 If necessary, select a subcategory.

A list of nearby Tripadvisor points of interest for the category appears.

4 Select Sort Results to filter the displayed points of interest by distance or popularity (optional).
5 Select , and enter a search term (optional).

Viewing Recently Found Locations

Your device stores a history of the last 50 locations you have found.

Select Where To? > Recent.

Clearing the List of Recently Found Locations

Select Where To? > Recent > > Clear > Yes.

Viewing Current Location Information

You can use the Where Am I? page to view information about your current location. This feature is helpful if you
need to tell emergency personnel your location.

From the map, select the vehicle.

Finding Emergency Services and Fuel

You can use the Where Am I? page to find the nearest hospitals, police stations, and fuel stations.

1 From the map, select the vehicle.
2 Select Hospitals, Police Stations, Truck Stops, or Fuel.

NOTE: Some service categories are not available in all areas.

NOTE: When a truck vehicle profile is active, an option for truck stops appears instead of fuel.

A list of locations for the selected service appears, with the nearest locations at the top.

3 Select a location.
4 Select an option:

• To navigate to the location, select Go!.

• To view the phone number and other location details, select .

Getting Directions to Your Current Location

If you need to tell another person how to get to your current location, your device can give you a list of
directions.

1 From the map, select the vehicle.
2 Select > Directions to Me.
3 Select a starting location.
4 Select Select.

Adding a Shortcut

You can add shortcuts to the Where To? menu. A shortcut can point to a location, a category, or a search tool.
The Where To? menu can contain up to 36 shortcut icons.

1 Select Where To? > Add Shortcut.
2 Select an item.

20 Finding and Saving Locations

Removing a Shortcut

1 Select Where To? > > Remove Shortcut(s).
2 Select a shortcut to remove.
3 Select the shortcut again to confirm.
4 Select Done.

Saving Locations

Saving a Location

1 Search for a location (Finding a Location by Category, page 16).
2 From the search results, select a location.
3 Select > Save.
4 If necessary, enter a name, and select Done.
5 Select Save.

Saving Your Current Location

1 From the map, select the vehicle icon.
2 Select Save.
3 Enter a name, and select Done.

Editing a Saved Location

1 Select Where To? > Saved.
2 If necessary, select a category.
3 Select a location.
4 Select .
5 Select > Edit.
6 Select an option:

• Select Name.

• Select Phone Number.

• Select Categories to assign categories to the saved location.

• Select Change Map Symbol to change the symbol used to mark the saved location on a map.

7 Edit the information.
8 Select Done.

Assigning Categories to a Saved Location

You can add custom categories to organize your saved locations.

NOTE: Categories appear in the saved locations menu after you have saved at least 12 locations.
1 Select Where To? > Saved.
2 Select a location.
3 Select .
4 Select > Edit > Categories.
5 Enter one or more category names, separated by commas.
6 If necessary, select a suggested category.
7 Select Done.

Finding and Saving Locations 21

Deleting a Saved Location

NOTE: Deleted locations cannot be recovered.
1 Select Where To? > Saved.
2 Select > Delete.
3 Select the box next to the saved locations to delete, and select Delete > Yes.

Navigating to Your Destination

Routes

A route is a path from your current location to one or more destinations.

• The device calculates a recommended route to your destination based on the preferences you set, including

the route calculation mode (Changing the Route Calculation Mode, page 28) and avoidances (Avoiding

Delays, Tolls, and Areas, page 28).

• The device can automatically avoid roads that are not appropriate for the active vehicle profile.

• You can start navigating to your destination quickly using the recommended route, or you can select an

alternate route (Starting a Route, page 22).

• If there are specific roads you need to use or avoid, you can customize the route (Shaping Your Route,

page 27).

• You can add multiple destinations to a route (Adding a Location to Your Route, page 27).

Starting a Route

1 Select Where To?, and search for a location (Finding and Saving Locations, page 15).
2 Select a location.
3 Select an option:

• To start navigating using the recommended route, select Go!.

• To choose an alternate route, select , and select a route.
Alternate routes appear to the right of the map.

• To edit the course of the route, select > Edit Route, and add shaping points to the route (Shaping Your

Route, page 27).

The device calculates a route to the location and guides you using voice prompts and information on the map
(Your Route on the Map, page 23). A preview of the major roads in your route appears at the edge of the map
for several seconds.

If you need to stop at additional destinations, you can add the locations to your route (Adding a Location to Your

Route, page 27).

Starting a Route by Using the Map

You can start route by selecting a location from the map.

1 Select View Map.
2 Drag and zoom the map to display the area to search.
3 Select a point, such as a street, intersection, or address location.
4 Select Go!.

Going Home

The first time you start a route home, the device prompts you to enter your home location.

1 Select Where To? > Go Home.
2 If necessary, enter your home location.

22 Navigating to Your Destination

Editing Your Home Location

1 Select Where To? > > Set Home Location.
2 Enter your home location.

Your Route on the Map

As you travel, the device guides you to your destination using voice prompts and information on the map.
Instructions for your next turn or exit, or other actions appear across the top of the map.

Navigating to Your Destination 23

Distance to the next action.

Next action in the route. Indicates the next turn, exit, or other action and the lane in which you should
travel, if available.

Name of the street or exit associated with the next action.

Route highlighted on the map.

Next action in the route. Arrows on the map indicate the location of upcoming actions.

Select to toggle popular truck routes on the map.

Map tool shortcuts.

Map tools. You can select the tools to show you more information about your route and surroundings.

Data fields.
TIP: You can touch these fields to change the information they show (Changing the Map Data Field,

page 34).

Vehicle speed.

24 Navigating to Your Destination

Active Lane Guidance

As you approach some turns, exits, or interchanges in your route, a detailed simulation of the road appears
beside the map, if available. A colored line indicates the proper lane for the turn.

Viewing Popular Truck Paths on the Map

You can enable the device to highlight popular truck paths on the map. This can be useful to help you choose
roads that are more accessible for your vehicle.

From the map, select .

Viewing Turns and Directions

While navigating a route, you can view upcoming turns, lane changes, or other directions for your route.
1 From the map, select an option:

• To view upcoming turns and directions as you navigate, select > Turns.
The map tool displays the next several turns or directions beside the map. The list updates automatically

as you navigate the route.

• To view the complete list of turns and directions for the entire route, select the text bar at the top of the
map.

2 Select a turn or direction (optional).

Detailed information appears. An image of the junction may appear for junctions on major roadways, if
available.

Viewing the Entire Route on the Map

1 While navigating a route, select anywhere on the map.
2 Select .

Navigating to Your Destination 25

Planning Your Arrival

Before you start a route, you can plan to arrive at a popular truck destination, such as a loading dock or truck
parking, at the end of your route. You can also add your own destinations to the map.

1 Select Where To?, and search for a location (Finding and Saving Locations, page 15).
2 Select a location.
3 Select Plan Arrival.

A preview of your destination appears on the map. Popular truck destinations appear next to the map. If your
dēzl device is paired with the dēzl app, it downloads BirdsEye satellite imagery automatically.

4 Select a destination, and select Go!.

Arriving at Your Destination

When you approach your destination, the device provides information to help you complete your route.

• indicates the location of your destination on the map, and a voice prompt announces you are approaching
your destination.

• When you approach some destinations, the device automatically suggests parking areas. You can select
More to view a full list of suggested parking areas (Parking Near Your Destination, page 27).

• When you approach some destinations while using a truck vehicle profile, the device automatically prompts
you to find a truck destination such as a loading dock or truck parking. You can select a suggested point on
the map, and then select Go! to navigate to that destination.

• When you stop at your destination, the device automatically ends the route. If the device does not detect your
arrival automatically, you can select Stop to end your route.

Completing a Truck Route

When you approach some truck destinations, a map tool appears to help you find common truck destinations
such as parking areas and loading docks.

1 Select the map tool .

2 Touch the map, and select a numbered trucking destination .
3 Select Go!.

26 Navigating to Your Destination

Parking Near Your Destination

Your device can help you find a parking spot near your destination. When you approach some destinations, the
device automatically suggests parking areas.

NOTE: This feature should be used only when you are using the car vehicle profile. While using a truck vehicle
profile, you can search for truck parking near your destination (Finding Truck Parking, page 19).

1 Select an option:

• When the device suggests parking, select More to see all suggested parking areas.
NOTE: When you select a suggested parking area, the device automatically updates your route.

• If the device does not suggest parking locations, select Where To? > Categories > Parking, and select >

My Destination.

2 Select a parking location, and select Go!.

The device guides you to the parking area.

Changing Your Active Route

Adding a Location to Your Route

Before you can add a location to your route, you must be navigating a route (Starting a Route, page 22).
You can add locations to the middle or end of your route. For example, you can add a fuel station as the next

destination in your route.
TIP: To create complex routes with multiple destinations or scheduled stops, you can use the trip planner to

plan, schedule, and save a trip (Planning a Route, page 55).

1 From the map, select > Where To?.
2 Search for a location (Finding and Saving Locations, page 15).
3 Select a location.
4 Select Go!.
5 Select an option:

• To add the location as the next destination in your route, select Add As Next Stop.

• To add the location to the end of your route, select Add As Last Stop.

• To add the location and edit the order of destinations in your route, select Add to Active Route.

The device re-calculates the route to include the added location and guides you to the destinations in order.

Shaping Your Route

Before you can shape your route, you must start a route (Starting a Route, page 22).
You can manually shape your route to change its course. This allows you to direct the route to use a certain

road or go through a certain area without adding a destination to the route.

1 From the map, select > Edit Route > Shape Route.

TIP: You can select to zoom in on the map and select a more precise location.

The device enters route shaping mode and recalculates the route to travel through the selected location.

2 Select > .
3 If necessary, select an option:

• To add more shaping points to the route, select additional locations on the map.

• To remove a shaping point, select the shaping point and select .

Navigating to Your Destination 27

Taking a Detour

You can take a detour for a specified distance along your route or detour around specific roads. This is useful if
you encounter construction zones, closed roads, or poor road conditions.

1 From the map, select > Edit Route.
2 Select an option:

• To detour your route for a specific distance, select Detour by Distance.

• To detour around a specific road on the route, select Detour by Road.

Changing the Route Calculation Mode

1 Select Settings > Navigation > Calculation Mode.
2 Select an option:

• Select Faster Time to calculate routes that are faster to drive but can be longer in distance.

• Select Shorter Distance to calculate routes that are shorter in distance but can take more time to drive.

Stopping the Route

• From the map, select > Stop.

• From the home screen, select Stop.

Using Suggested Routes

Before you can use this feature, you must save at least one location and enable the travel history feature
(Navigation Settings, page 61).

Using the myTrends™ feature, your device predicts your destination based on your travel history, the day of the
week, and the time of day. After you have driven to a saved location several times, the location may appear in
the navigation bar on the map, along with the estimated time of travel, and traffic information.

Select the navigation bar to view a suggested route to the location.

Avoiding Delays, Tolls, and Areas

Avoiding Traffic Delays on Your Route

Before you can avoid traffic delays, you must be receiving traffic information (Receiving Traffic Data Using Your

Smartphone, page 38).

By default, the device optimizes your route to avoid traffic delays automatically. If you have disabled this option
in the traffic settings (Traffic Settings, page 62), you can view and avoid traffic delays manually.

1 While navigating a route, select > Traffic.
2 Select Alternate Route, if available.
3 Select Go!.

Avoiding Road Features

1 Select Settings > Navigation > Avoidances.
2 Select the road features to avoid on your routes, and select OK.

Avoiding Environmental Zones

Your device can avoid areas with environmental or emissions restrictions that may apply to your vehicle. This
option applies to the vehicle type in the active vehicle profile (Vehicle Profiles, page 12).

1 Select Settings > Navigation > Environmental Zones.
2 Select an option:

• To be asked each time before routing through an environmental zone, select Always Ask.

• To always avoid environmental zones, select Avoid.

• To always allow environmental zones, select Allow.

28 Navigating to Your Destination

Custom Avoidances

Custom avoidances allow you to select specific areas or sections of road to avoid. When the device calculates a
route, it avoids these areas and roads unless no other reasonable route is available.

Avoiding a Road

1 Select Settings > Navigation > Custom Avoidances.
2 If necessary, select Add Avoidance.
3 Select Add Avoid Road.
4 Select the starting point of the section of road to avoid, and select Next.
5 Select the ending point of the road section, and select Next.
6 Select Done.

Avoiding an Area

1 Select Settings > Navigation > Custom Avoidances.
2 If necessary, select Add Avoidance.
3 Select Add Avoid Area.
4 Select the upper-left corner of the area to avoid, and select Next.
5 Select the lower-right corner of the area to avoid, and select Next.

The selected area is shaded on the map.

6 Select Done.

Disabling a Custom Avoidance

You can disable a custom avoidance without deleting it.

1 Select Settings > Navigation > Custom Avoidances.
2 Select an avoidance.
3 Select > Disable.

Deleting Custom Avoidances

1 Select Settings > Navigation > Custom Avoidances > .
2 Select an option:

• To delete all custom avoidances, select Select All > Delete.

• To delete one custom avoidance, select the avoidance, and select Delete.

Using the Map

You can use the map to navigate a route (Your Route on the Map, page 23) or to view a map of your
surroundings when no route is active.

1 Select View Map.
2 Touch anywhere on the map.
3 Select an option:

• Drag the map to pan left, right, up, or down.

• To add or remove map layers such as topographic and BirdsEye imagery, select .

• To zoom in or out, select or .

• To switch between North Up, 2-D, and 3-D views, select .

• To open the route planner, select ( Route Planner, page 55).

• To start a route, select a location on the map, and select Go! (Starting a Route by Using the Map, page 22).

Using the Map 29

Map Tools

Map tools provide quick access to information and device functions while you view the map. When you activate
a map tool, it appears in a panel at the edge of the map.

Stop: Stops navigation of the active route.
Edit Route: Allows you to take a detour or skip locations in your route (Changing Your Active Route, page 27).
Mute: Mutes the device audio.
Cities Ahead: Shows upcoming cities and services along your active route or along a highway (Cities Ahead,

page 31).

Up Ahead: Shows upcoming locations along the route or the road on which you are traveling (Up Ahead,

page 30).

Elevation: Displays elevation changes ahead.
Traffic: Displays traffic conditions along your route or in your area (Viewing Upcoming Traffic, page 33). This

feature is not available in all areas or for all device models.

Trip Data: Displays customizable trip data, such as speed or mileage (Viewing Trip Data from the Map,

page 33).

Turns: Displays a list of upcoming turns in your route (Viewing Turns and Directions, page 25).
Phone: Displays a list of recent phone calls from your connected phone, and displays in-call options while a

phone call is active (Using In-Call Options, page 37).

Weather: Displays weather conditions for your area.
photoLive: Displays live traffic cameras from your photoLive subscription (photoLive Traffic Cameras,

page 38).

Garmin eLog: Displays hours of service information from the Garmin eLog™ app. Allows you to change duty

status while you are not driving.

Smart Notifications: Displays recent smart notifications from your connected phone (Smart Notifications,

page 36).

PrePass ®: Shows notifications for upcoming weigh stations and bypass decisions (PrePass®, page 43).
Plan Arrival: Shows a map of your destination and allows you to find a truck destination.
Love's: Shows upcoming Love's Travel Stops® along your route.
Pilot Flying J: Shows upcoming Pilot Flying J Travel Centers™ along your route.
Break Planner: Displays break reminders and suggested stops.
Overview Map: Shows an overview of your route on the map.

Viewing a Map Tool

1 From the map, select .
2 Select a map tool.

The map tool appears in a panel at the edge of the map.

3 When you are done using the map tool, select .

Up Ahead

The Up Ahead tool provides information about upcoming locations along your route or the road on which you
are traveling. You can view upcoming points of interest by category, such as restaurants, fuel stations, or rest
areas.

You can customize the categories that show in the Up Ahead tool.

30 Using the Map

Viewing Upcoming Locations

1 From the map, select > Up Ahead.

While you are traveling, the map tool shows the next location along your road or route.

2 Select an option:

• If the map tool shows categories, select a category to view a list of nearby locations in that category.

• If the map tool shows upcoming locations, select a location to view location details or start a route to the
location.

Customizing the Up Ahead Categories

You can change the location categories that appear in the Up Ahead tool.

1 From the map, select > Up Ahead.
2 Select a category.
3 Select .
4 Select an option:

• To move a category up or down in the list, select and drag the arrow next to the category name.

• To change a category, select the category.

• To create a custom category, select a category, select Custom Search, and enter the name of a business
or category.

5 Select Save.

Cities Ahead

While you are traveling on a highway or navigating a route that includes a highway, the Cities Ahead tool
provides information about upcoming cities along the highway. For each city, the map tool shows the distance
to the highway exit and the services available, similar to the information on highway road signs.

Viewing Upcoming Cities and Exit Services

1 From the map, select > Cities Ahead.

While you are traveling along a highway or an active route, the map tool shows information about upcoming
cities and exits.

2 Select a city.

The device shows a list of points of interest located at the selected city exit, such as fuel stations, lodging, or
restaurants.

3 Select a location, and select Go! to start navigating.

Warning and Alert Symbols

WARNING

Entering your vehicle profile characteristics does not guarantee that your vehicle's characteristics will be
accounted for in all route suggestions or that you will receive the warning icons in all cases. Limitations may
exist in the map data such that your device cannot account for these restrictions or road conditions in all cases.
Always defer to all posted road signs and road conditions when making driving decisions.

Warning and alert symbols may appear on the map or in route directions to alert you to potential hazards, road
conditions, and upcoming weigh stations.

Using the Map 31

Restriction Warnings

Height

Weight

Axle Weight

Length

Width

No Trucks Allowed

No Trailers Allowed

Material Restrictions

No Flammables or Explosives Allowed

No Water Pollutants Allowed

No Left Turn

No Right Turn

No U Turn

Road Condition Warnings

Risk of grounding

Lateral wind

Narrow road

Sharp curve

Steep down hill

Steep up hill

Tree overhang

32 Using the Map

Alerts

Weigh station

Road not verified for trucks

Trip Information

Viewing Trip Data from the Map

From the map, select > Trip Data.

Customizing the Trip Data Fields

1 From the map, select > Trip Data.
2 Select a trip data field.
3 Select an option.

The new trip data field appears in the trip data map tool.

Viewing Your Trip History

Your device keeps a record of the path you have traveled.

1 Select Settings > Map Display > Map Layers.
2 Select the Trip History check box.

Resetting Trip Information

1 From the map, select Speed.
2 Select a trip information data field.
3 Select > Reset Field(s).
4 Select an option:

• When not navigating a route, select Select All to reset every data field except the speedometer, on the first
page.

• Select Reset Overall Data to reset Trip A and total data.

• Select Reset Max. Speed to reset the maximum speed.

• Select Reset Trip B to reset the odometer.

Viewing Upcoming Traffic

NOTICE

Garmin is not responsible for the accuracy or timeliness of the traffic information.

Before you can use this feature, your device must be receiving traffic data (Traffic, page 38).
You can view traffic incidents coming up along your route or along the road on which you are traveling.
1 While navigating a route, select > Traffic.

The nearest upcoming traffic incident appears in a panel on the right side of the map.

2 Select the traffic incident to view additional details.

Viewing Traffic on the Map

The traffic map shows color-coded traffic flow and delays on nearby roads.

1 From the main menu, select > dēzl > Traffic.
2 If necessary, select > Legend to view the legend for the traffic map.

Using the Map 33

Searching for Traffic Incidents

1 From the main menu, select > dēzl > Traffic.
2 Select > Incidents.
3 Select an item in the list.
4 If there is more than one incident, use the arrows to view additional incidents.

Customizing the Map

Customizing the Map Layers

You can customize which data appear on the map, such as icons for points of interest and road conditions.

1 Select Settings > Map Display > Map Layers.
2 Select the layers to include on the map, and select Save.

Changing the Map Data Field

1 From the map, select a data field.

NOTE: You cannot customize Speed.

2 Select a type of data to display.

Changing the Map Perspective

1 Select Settings > Map Display > Driving Map View.
2 Select an option:

• Select Track Up to display the map in two dimensions (2-D), with your direction of travel at the top.

• Select North Up to display the map in 2-D with north at the top.

• Select 3-D to display the map in three dimensions.

3 Select Save.

Live Services, Traffic, and Smartphone Features

WARNING

Do not read or interact with notifications while driving, because doing so can cause distraction that could lead
to an accident resulting in serious personal injury or death.

The dēzl app allows your device to receive smart notifications and live information, such as live traffic data and
weather information.

Live traffic data: Sends real-time traffic data to your device, such as traffic incidents and delays, construction

zones, and road closings (Traffic, page 38).

Weather information: Sends real-time weather forecasts, road conditions, and weather radar to your device

(Viewing the Weather Forecast, page 56).

Smart Notifications: Displays phone notifications and messages on your device. This feature is not available for

all languages.

Hands-Free calling: Allows you to place and receive phone calls using your device, and allows you to use the

device as a hands-free speaker phone. If the selected language supports the voice command feature, you can
place calls using voice commands.

Send locations to device: Allows you to send locations from your smartphone to your navigation device.

34 Live Services, Traffic, and Smartphone Features

Pairing with Your Smartphone

You can pair your dēzl device with your smartphone and the dēzl app to enable additional features and access
live information (Live Services, Traffic, and Smartphone Features, page 34).

1 From the app store on your smartphone, install the dēzl app.
2 Turn on your dēzl device, and place the device and your smartphone within 3 m (10 ft.) of each other.
3 On your phone, open the dēzl app.
4 Follow the on-screen instructions to sign in to a Garmin account and complete the pairing and setup

process.

The main app dashboard appears. After the devices are paired, they connect automatically when they are turned
on and within range.

Tips After Pairing the Devices

• After the initial pairing, the two devices can connect automatically each time you turn them on.

• When your phone is connected to your device, you are ready to receive voice calls.

• When you turn on the device, it tries to connect to the last phone to which it was connected.

• You might need to set your phone to connect to the device automatically when the device is turned on.

• To place phone calls, the contact sharing permission must be enabled for the navigation device in the
Bluetooth settings on your phone.

• You should verify the Bluetooth features you want to use are enabled (Enabling or Disabling Bluetooth

Features, page 37).

Pairing Additional Bluetooth Devices

1 Place your headset or phone and your Bluetooth device within 33 ft. (10 m) of each other.
2 On your device, enable Bluetooth wireless technology.
3 On your headset or phone, enable Bluetooth wireless technology and ensure it is visible to other Bluetooth

devices.

4 On your device, select Settings > Wireless Networks > Bluetooth.

A list of nearby Bluetooth devices appears.

5 Select your headset or phone from the list.
6 If necessary, select Pair.

Going to an Address or Location Using the dēzl App

You can use the dēzl app to search for an address, business, or point of interest, and send it to your dēzl device
for navigation.

1 From the dēzl app, select Where To?.
2 Select an option:

• To search for an address near you, enter the house number and street name.

• To search for an address in another city, enter the house number, street name, city, and state.

• To search for a business name, enter all or part of the name.

• To search for a city, enter the city and state.
As you type, suggestions appear below the search field.

3 Select a suggested search result.

The app displays the location on a map.
4 Select Go! to start a route.
The dēzl device starts navigating to the selected location, and the location is added to your recent searches in

the Where To? menu.

Live Services, Traffic, and Smartphone Features 35

Smart Notifications

While your device is connected to the dēzl app, you can view notifications from your smartphone on your dēzl
device, such as text messages, incoming calls, and calendar appointments.

Receiving Notifications

WARNING

Do not read or interact with notifications while driving, because doing so can cause distraction that could lead
to an accident resulting in serious personal injury or death.

Before you can use this feature, your device must be connected to a supported phone running the dēzl app.
From most pages, a popup appears when the device receives a notification from your smartphone. If the device

is moving, you must verify you are a passenger and not the driver before you can view notifications.
NOTE: If you are viewing the map, notifications appear in a map tool.

• To ignore a notification, select OK.

The popup closes, but the notification remains active on your phone.

• To view a notification, select View.

• To listen to the notification, select View > Play.

The device reads the notification using text-to-speech technology. This feature is not available for all
languages.

• To perform additional actions, such as dismissing the notification from your phone, select View, and select

an option.
NOTE: Additional actions are available for only some notification types and must be supported by the app

generating the notification.

Hands-Free Calling

NOTE: While most phones and headsets are supported and can be used, a particular phone or headset cannot
be guaranteed to be compatible. All features may not be available for your phone.

Using Bluetooth wireless technology, your device can connect to your compatible mobile phone and wireless
headset or helmet to become a hands-free device. To check compatibility, go to www.garmin.com/bluetooth.

Placing a Call

1 Select .
2 Select an option:

• To dial a number, select , enter the phone number, and select .

• To call a recently dialed or received phone number, select , and select a number.

• To call a contact from your phone book, select , and select a contact.

Receiving a Call

When you receive a call, select Answer or Dismiss.

36 Live Services, Traffic, and Smartphone Features

Using In-Call Options

In-call options appear when you answer a call. Some options may not be compatible with your phone.
TIP: If you close the in-call options page, you can open it again by selecting from the main menu.

• To set up a conference call, select the caller ID, and select .

• To transfer audio to your phone, select .

TIP: You can use this feature if you want to disconnect the Bluetooth connection and remain on the call, or if
you need privacy.

• To use the dial pad, select the caller ID, and select .

TIP: You can use this feature to use automated systems, such as voice mail.

• To mute the microphone, select .

• To hang up, select .

Saving a Phone Number as a Preset

You can save up to three contacts as presets on the dial pad. This allows you to quickly call your home phone
number, family members, or frequently called contacts.

1 Select > .
2 Hold a preset number, such as Preset 1.
3 Select a contact.

Wireless Headsets

Your device can send audio navigation prompts to a Bluetooth enabled wireless headset.

Enabling or Disabling Bluetooth Features

You can enable or disable Bluetooth features such as phone calls, media audio, and live services for your paired
smartphone.

1 Select Settings > Wireless Networks > Bluetooth.
2 Select your phone name.
3 Select a feature to enable or disable it.

Showing or Hiding App Notifications (Android™)

You can use the dēzl app to customize which types of smartphone notifications appear on your dēzl device.

1 On your phone, open the dēzl app.
2 Select > Smart Notifications.

A list of smartphone app categories appears.
3 Select a category to enable or disable notifications for that type of app.

Showing or Hiding Notification Categories for Your Apple® Device

If you are connected to an Apple device, you can filter the notifications shown on your dēzl device by showing or
hiding categories.

1 Select > Tools > Smart Notifications > .
2 Select the check box next to each notification to show.

Disconnecting a Bluetooth Device

You can temporarily disconnect a Bluetooth device without deleting it from the paired devices list. The
Bluetooth device can connect to your dēzl device automatically in the future.

1 Select Settings > Wireless Networks > Bluetooth.
2 Select the device to disconnect.
3 Select OK.

Live Services, Traffic, and Smartphone Features 37

Deleting a Paired Bluetooth Device

You can delete a paired Bluetooth device to prevent it from automatically connecting to your dēzl device in the
future. Deleting a paired smartphone also deletes all synced phonebook contacts and call history from your dēzl
device.

1 Select Settings > Bluetooth.
2 Next to the Bluetooth device name, select > Forget.

Deleting a Paired Phone

You can delete a paired phone to prevent it from automatically connecting to your device in the future.

1 Select Settings > Bluetooth > Bluetooth.
2 Select the phone, and select Forget.

Traffic

NOTICE

Garmin is not responsible for the accuracy or timeliness of the traffic information.

Your device can provide information about traffic on the road ahead or on your route. You can set your device to
avoid traffic when calculating routes, and to find a new route to your destination if a large traffic delay occurs on
your active route (Traffic Settings, page 62). The traffic map allows you to browse the map for traffic delays in
your area.

To provide traffic information, your device must be receiving traffic data.

• All product models can receive subscription-free traffic data using the dēzl app (Receiving Traffic Data Using

Your Smartphone, page 38).

Traffic data is not available in all areas. For information about traffic coverage areas, go to garmin.com/traffic.

Receiving Traffic Data Using Your Smartphone

Your device can receive subscription-free traffic data while connected to a smartphone running the dēzl app.

1 Connect your device to the dēzl app.
2 On your dēzl device, select Settings > Traffic > Traffic, and verify the Garmin Live Traffic option is selected.

Viewing Traffic on the Map

The traffic map shows color-coded traffic flow and delays on nearby roads.

1 From the main menu, select > dēzl > Traffic.
2 If necessary, select > Legend to view the legend for the traffic map.

Searching for Traffic Incidents

1 From the main menu, select > dēzl > Traffic.
2 Select > Incidents.
3 Select an item in the list.
4 If there is more than one incident, use the arrows to view additional incidents.

photoLive Traffic Cameras

Before you can use this feature, your device must be connected to the dēzl app (Pairing with Your Smartphone,

page 35).

photoLive traffic cameras provide live images of traffic conditions on major roadways and intersections.
The photoLive service is not available in all areas.

38 Traffic

Viewing and Saving photoLive Traffic Cameras

You can view live images from nearby traffic cameras. You can also save traffic cameras for areas you travel
frequently.

1 Select > photoLive.
2 Select Touch to Add
3 Select a road.
4 Select a traffic camera location.

A preview of the live image from the camera appears next to a map of the camera's location. You can select

the image preview to view the full-sized image.
5 Select Save to save the camera (optional).

A thumbnail image preview of the camera is added to the main screen of the photoLive app.

Saving a Traffic Camera

1 Select > photoLive.
2 Select Touch to Add.
3 Select a traffic camera.
4 Select Save.

Vehicle and Driver Tools

Break Planning

NOTICE

This device by itself is NOT an approved substitute for logbook recording requirements under Federal Motor
Carrier Safety Administration (FMCSA) regulations. Drivers should comply with all applicable federal and state
hours-of-service requirements. When integrated with a Garmin eLog compliant Electronic Logging Device (ELD),
this device enables a motor carrier to comply with hours of service logging and break requirements. For more
information, or to purchase a Garmin eLog device, go to garmin.com/elog.

When the break planning feature is enabled, the device notifies you one hour before suggested break times and
drive hour limits and suggests break locations on your route. You can use this feature to keep track of your
working hours, which may help you comply with safety regulations.

NOTE: Break planning features are not available when using the car vehicle profile.

Taking a Suggested Break

When it is time for a break, the device notifies you and displays suggested break location POIs along your route.

Select a POI from the list of suggested break locations.
The device adds the break location as the next destination on your route.

Starting the Break Timer

The break timer starts automatically when the vehicle is moving at least 8 kph (5 mph) for 30 seconds. You can
start the timer manually at any time.

1 From the map, select > Break Planner.
2 Select Start Timer.

Vehicle and Driver Tools 39

Pausing and Resetting the Break Timer

The break timer pauses automatically when the vehicle stops for three minutes or longer. You can pause the
timer manually for brief stops, such as parking or stopping at a truck stop. At the end of your drive, you can
manually reset the timer.

1 Select Stop Timer.
2 Select an option:

• To pause the timer, select Pause.

• To stop and reset the timer, select Reset.

Adjusting Drive Hours

You can adjust your total hours driven to more closely match your hours of service records.

1 While using the break planner feature, select Total Hours Driven.
2 Enter the total hours driven.
3 Select Save.

Adjusting the Daily Driving Limit

You can adjust the daily driving limit to correspond with legal requirements in your area.

NOTE: This feature is not available in all areas.
1 While using the break planner feature, select Daily Hours Driven.
2 Select the daily driving limit for your area.
3 Select Save.

IFTA

NOTE: This feature is not available in all areas.
Before you can use this feature, a truck vehicle profile must be active.
You can record data needed for International Fuel Tax Agreement documentation (IFTA), such as fuel-purchase

data and miles driven.

Entering Fuel Data

1 Select > dēzl > IFTA > At the Pump.
2 Enter the fuel price per gallon.
3 Select the Fuel Used field.
4 Enter the amount of fuel purchased.
5 If necessary, select the fuel type:

• To record the amount in liters, select Gallons > Liters > Save.

• To record the amount in gallons, select Liters > Gallons > Save.

6 If necessary, select the Tax Included check box.
7 Select Next.
8 Select an option to record the fuel station where you refueled:

• Select a nearby fuel station from the list.

• Select the text field, and enter the fuel station name and address.

9 Select the fuel purchaser.

40 Vehicle and Driver Tools

Editing Fuel Data

1 Select > dēzl > IFTA > Fuel Journals.
2 If necessary, select a vehicle profile.
3 If necessary, select a quarter.
4 Select a fuel record.
5 Select an option:

• Select a field to edit the information.

• Select to delete the record.

Viewing and Exporting a Jurisdiction Summary

The jurisdiction summary lists data for each state or province in which your vehicle has operated during each
quarter. The jurisdiction summary is available in some areas.

1 Select > dēzl > IFTA > Jurisdiction Summary.
2 If necessary, select a truck.
3 If necessary, select a quarter.
4 Select > Export > OK to export a jurisdiction summary.

The device exports the summary to a .csv file and stores it in the Reports folder on the device.

Editing and Exporting Trip Reports

1 From the main menu, select > dēzl > IFTA > Trip Reports.
2 If necessary, select a truck.
3 If necessary, select a quarter.
4 Select a report.
5 Select an option:

• Select > Delete, and select the check box to delete a report.

• Select > Combine, and select the check boxes to combine reports.

• Select > Export > OK. The device exports the report to a .csv file and stores it in the Reports folder on
the device.

Viewing Exported Jurisdiction Summaries and Trip Reports

NOTICE

If you do not know the purpose of a file, do not delete it. Your device memory contains important system files
that should not be deleted.

1 Connect the device to your computer.
2 From the file browser on your computer, browse to the internal device storage, and open the Reports folder.
3 Open the IFTA folder.
4 Open the .csv file.

Vehicle and Driver Tools 41

Logging Service History

You can log the date and odometer reading when service or maintenance is performed on your vehicle. The
device provides several service categories, and you can add custom categories (Adding Service Categories,

page 42).

1 Select > Tools > Service History.
2 Select a service category.
3 Select Add Record.
4 Enter the odometer reading, and select Next.
5 Enter a comment (optional).
6 Select Done.

Adding Service Categories

1 Select > Tools > Service History.
2 Select > Add Category.
3 Enter a category name, and select Done.

Deleting Service Categories

When you delete a service category, all service records in the category are also deleted.

1 Select > Tools > Service History.
2 Select > Delete Categories.
3 Select the service categories to delete.
4 Select Delete.

Renaming Service Categories

1 Select > Tools > Service History.
2 Select the category to be renamed.
3 Select > Rename Category.
4 Enter a name, and select Done.

Deleting Service Records

1 Select > Tools > Service History.
2 Select a service category.
3 Select > Delete Records.
4 Select the service records to be deleted.
5 Select Delete.

Editing a Service Record

You can edit the comment, odometer reading, and date of a service record.

1 Select > Tools > Service History.
2 Select a category.
3 Select a field.
4 Enter the new information, and select Done.

42 Vehicle and Driver Tools

PrePass

Garmin is not responsible for the accuracy or timeliness of the information provided by the PrePass app.

NOTE: Before you can use this feature, you must have an active PrePass account.
The PrePass app enables drivers to verify the safety, credentials, and weight of a commercial vehicle with

upcoming weigh stations. You can pair your dēzl device with the dēzl app and the PrePass app to receive
upcoming weigh station notifications on your dēzl device.

NOTE: This feature is available only in the United States.

®

NOTICE

Loyalty Programs

From your dēzl device, you can access loyalty programs from some of the travel plazas in the United States,
including Love's Travel Stops and Pilot Flying J Travel Centers. You can use the loyalty program apps on your
dēzl device to check reward points balances and other loyalty program information. To activate loyalty program
features, sign in to your loyalty program account in the dēzl app.

NOTE: This feature is available only in the United States.

Garmin eLog

The Garmin eLog adapter enables a motor carrier to comply with FMCSA Electronic Logging Device
(ELD) regulations. When the dēzl device is paired with the Garmin eLog adapter, the dēzl device and the Garmin
eLog adapter together provide a complete ELD solution without the need for an additional smartphone or mobile
device. You can use your dēzl device to record and view hours of service information, change your duty status,
create inspection reports, and more.

The Garmin eLog adapter is not available in all areas. For more information, or to purchase a Garmin eLog
adapter, go to garmin.com/elog.

Setting Up Your Garmin eLog Adapter

NOTE: If you need to transfer Garmin eLog data from another device to your dēzl device , you must import the
data during the setup process. You should create a data backup from your previous device before you start
setting up the Garmin eLog adapter on your dēzl device (Transferring Garmin eLog Data from Another Device,

page 43).

You must set up and pair your Garmin eLog adapter with the Garmin eLog app in order to be in compliance with
FMCSA ELD regulations. For more information about installing the Garmin eLog adapter in your vehicle, see the
Garmin eLog Owner's Manual at garmin.com/manuals/elog.

1 On your dēzl device, open the Garmin eLog app.
2 Follow the instructions in the app to set up and configure the Garmin eLog system, administrator account,

and driver profiles.

NOTICE

The administrator account is critical for some app functions. Choose an administrator password you can
remember, and do not lose the password. The administrator password cannot be recovered without clearing
all app data, which causes all recorded Garmin eLog data to be deleted.

NOTE: Until you complete the setup process, the Garmin eLog device has limited functionality and is not
compliant with FMCSA ELD regulations.

Transferring Garmin eLog Data from Another Device

If you have previously used your Garmin eLog adapter with another device, you can transfer the Garmin eLog
app data from the previous device to your dēzl device. You must complete this transfer during the initial setup.

1 From the Garmin eLog app on your previous device, create a data backup (Backing Up Data, page 44).
2 While setting up your Garmin eLog adapter with your dēzl device, restore the data backup (Restoring Data,

page 44).

Garmin eLog 43

Backing Up Data

You can back up your recorded data to a USB storage device. You should back up regularly to help prevent data
loss. This is also useful when you need to transfer data to another device.

1 From the Garmin eLog app, select Settings > Back Up Data.
2 Insert a USB storage device into the USB port on the Garmin eLog adapter.

The light ring on the adapter glows green and plays a tone when it is ready to back up data.

3 Select Back Up Data.

Restoring Data

You can restore backed up data from a USB storage device. This can be useful when transferring Garmin eLog
app data from another device.

NOTE: You can restore backed up data only while you are setting up the Garmin eLog app.
1 Open the Garmin eLog app to start the setup process.
2 Follow the on-screen instructions to install the Garmin eLog adapter in the vehicle diagnostic port and

complete the pairing process.

3 Select Restore from Backup.
4 Insert a USB storage device containing backup files into the USB port on the Garmin eLog adapter.

The light ring on the adapter glows green and plays a tone when it is ready to restore data.

5 Select a backup file.
6 Select Restore.

Daily Operation Guidelines

The following points are guidelines to follow when using the Garmin eLog system. Your motor carrier may have
different operation requirements. Follow your motor carrier's recommendations for daily operation.

• Verify the dēzl is securely mounted in the vehicle and its screen is visible from a normal seated position.

• Verify Bluetooth wireless technology and location services are enabled on your device at all times while using
the Garmin eLog adapter.

• Verify the Garmin eLog app is running and the Garmin eLog adapter is secured to the vehicle diagnostic port
before starting the vehicle.

• Log in to the Garmin eLog app at the start of each day.

• Review and claim all logs recorded for an unidentified driver, if applicable.

• At the end of each work day, log out of the Garmin eLog app after turning off the engine.

• Certify your records, and submit them to your motor carrier at the end of each day (Certifying Daily Logs,

page 48).

Starting a Drive

Each time you drive your vehicle, you should complete these actions to ensure your hours of service information
is recorded correctly.

1 Verify the Garmin eLog adapter is secured to the vehicle diagnostic port.

For more information about installing the Garmin eLog adapter in your vehicle, see the Garmin eLog Owner's
Manual at garmin.com/manuals/elog.

2 Open the Garmin eLog app, and log in as the driver.
3 Start your vehicle.
4 Before you start driving, change your duty status in the Garmin eLog app.

The Garmin eLog adapter syncs with the Garmin eLog app and records ELD Records of Duty Service (RODS)
automatically.

44 Garmin eLog

Garmin eLog App Overview

The name of the active driver.

Select to change duty status.

Diagnostic and malfunction indicator. Select to view detailed information about diagnostic or malfunc
tion alerts (Viewing Diagnostics and Malfunctions, page 51).

NOTE: The diagnostic and malfunction indicator also appears in the status bar or near the top of every
screen on your dēzl device.

Select to record adverse conditions, create a Records of Duty Status (RODS) report, or log out.

Select to view a chart of your hours of service information.

Select to view a summary of currently available on-duty hours.

Select to review log information.

Select to view a full-screen chart of your service hours.

Select to review logs for a different day.

Select to certify your logs for the selected day.

Select to submit a 24-hour log to your motor carrier.

A record of your status for the recorded time period. Select to edit status information and adjust the
time.

Garmin eLog 45

Select to view hours of service information.

Select to manage trailer and shipment information or to create a driver vehicle inspection report.

Select to view inspection reports and transfer reports to a roadside inspector.

Select to view additional system settings.

Garmin eLog Map Tool Overview

The Garmin eLog map tool appears on the navigation map automatically while your device is connected to a
Garmin eLog adapter. If you close the map tool, you can open it manually by selecting > Garmin eLog from
the map.

As you drive, the device displays your duty status and hours of service information in the Garmin eLog map tool.

Diagnostic and malfunction indicator. Select to view detailed information about diagnostic or malfunction
alerts (Viewing Diagnostics and Malfunctions, page 51).

Driver name and duty status. Select to change the driver's duty status (Changing Duty Status, page 47).
NOTE: You cannot change your duty status while driving.

Current remaining drive hours. Select to view detailed drive hours information in the Garmin eLog app.

46 Garmin eLog

Driving in a Team

If you are driving in a team, you can switch between active drivers at any time. Each driver must log in to the
Garmin eLog app before they can be set as the active driver.

From the Garmin eLog app, select the icon next to the user who should be listed as the active driver.

Changing Duty Status

For the most accurate records, you must change your duty status in the Garmin eLog app every time you change
your driving status, such as when you start driving, take a break, switch drivers, or change the type of driving you
are doing. The Garmin eLog adapter automatically switches to driving status when the vehicle's diagnostic port
reports a speed greater than or equal to five miles per hour. The vehicle is stopped when the diagnostic port
reports a speed of zero miles per hour.

NOTE: The vehicle must be stopped to change duty status. You cannot manually change duty status while you
are driving.

1 Select an option:

• From the Garmin eLog app, select .

• From the Garmin eLog map tool, select the driver name.

2 Select an option:

NOTE: The Personal Conveyance and Yard Moves options are available only if the administrator has enabled

them for your driver profile (Editing a Driver Profile, page 53).

• If you are on duty, select On Duty.

• If you are off duty, select Off Duty.

• If you are on duty and driving, select Driving.

• If you are moving to the sleeper berth, select Sleeper Berth.

• If you are using the vehicle for personal conveyance, select Personal Conveyance.

• If you are moving the vehicle within the yard, select Yard Moves.

Garmin eLog 47

Editing a Duty Status Record

You can update individual duty status entries to make corrections or updates to your duty status history as
allowed by FMCSA regulations. This can be useful if you forget to change your duty status.

1 From the Garmin eLog app, select the duty status record for the affected time period.
2 Select Duty Status.
3 Select the correct duty status for the time period.
4 If necessary, update the start and end times for the duty status entry.
5 If necessary, enter the location where this duty status was active.
6 Enter an annotation describing the reason for the change.
7 Select Save.

Viewing Hours of Service

1 From the Garmin eLog app, select HOS.
2 Select an option:

• To view a chart of your hours of service information, select .
TIP: You can select the chart to view a larger image of your information.

• To view a list of remaining drive hours, select .

Recording Adverse Conditions

If you require a time extension because of adverse conditions, you can add a two-hour extension to your hours
for the day.

From the Garmin eLog app, select > Record Adverse Conditions > Yes.

Reviewing Logs

The Garmin eLog app keeps track of logs that may require review, including logs that have been edited or logs
that exist for an unidentified driver. When a driver logs in, the app prompts them to review logs that contain an
unidentified driver, if any are available. Drivers are responsible for reviewing and claiming logs, if applicable.

1 Select HOS > .
2 Select a log.
3 Select an option:

• If the log applies to you and your hours of service, select Accept.

• If the log does not apply to you, select Decline.

Certifying Daily Logs

After you are finished driving for the day, you should certify your daily log. If you update your duty status after
certifying it, you must certify it again.

From the Garmin eLog app, select > Agree.

Submitting a Daily Log

You can submit a daily log to your motor carrier.

1 From the Garmin eLog app, select .
2 Select an option to share your exported log.

48 Garmin eLog

Exporting and Saving a Record of Duty Status (RODS) Report

You can create a RODS report so you or your motor carrier can open your records of duty status outside of the
Garmin eLog app.

1 From the Garmin eLog app, select > Create RODS Report.
2 If necessary, select Create Additional Graph Grid Report to include a graph grid in your RODS report.
3 Select an option:

• To save the report to the internal storage of your dēzl device, select Save Report.

• To export the report to email, select Export Report.

Recording Trailers and Shipments

You can use the Garmin eLog app to keep records of trailers and shipments.

1 Select Vehicle > .
2 Select an option:

• To add a trailer, select Add Trailer.

• To add a shipment, select Add Shipment.

3 Enter the trailer number or shipping document number.

Roadside Inspection

Viewing Inspection Information

An authorized safety official may ask to view all information recorded by the Garmin eLog system for the
current 24-hour period and any of the previous seven consecutive days. You can view this information on the
Garmin eLog app at any time.

From the Garmin eLog app, select Inspection.

Transferring Data to an Inspector Using Web Services

Before you can use this feature, you must be connected to a wireless network.
You can submit your RODS report to the FMCSA over the web.

1 From the Garmin eLog app, select Inspection.
2 Select > Yes.
3 If necessary, enter an annotation.
4 Select Web Services.
5 Enter your email address, and select Send Report.

An email confirmation with your RODS report is sent to the email provided, and the report is submitted to the
FMCSA.

Transferring Data to an Inspector Using Email

Before you can use this feature, you must be connected to a wireless network.
You can submit your RODS report to the FMCSA by sending an email.

1 From the Garmin eLog app, select Inspection.
2 Select > Yes.
3 If necessary, enter an annotation.
4 Select Email.
5 Enter your email address, and select Send Report.

An email confirmation with your RODS report is sent to the email provided, and the report is submitted to the
FMCSA.

Garmin eLog 49

Transferring Data to an Inspector Using a USB Device

You can transfer data to a USB mass storage device to provide it to an authorized safety official. The Garmin
eLog adapter supports USB mass storage devices formatted using the FAT32 file system.

1 From the Garmin eLog app, select Inspection.
2 Select > Yes.
3 If necessary, enter an annotation.
4 Select USB.
5 Connect a USB mass storage device to the USB port on your Garmin eLog adapter.

The adapter glows green when it is ready to send the inspection report.

6 Enter your password.
7 Select Send to USB Device.

The Garmin eLog app notifies you when the transfer is complete.

8 Remove the USB mass storage device from the adapter.

Transferring Data to an Inspector Using Bluetooth Wireless Technology

The inspector's device must support the Bluetooth Personal Area Networking (PAN) profile and must be able to
connect to FMCSA Web Services to complete transfers using Bluetooth wireless technology. Ensure that
Bluetooth wireless technology and a Wi-Fi hotspot are enabled on the inspector's mobile device.

The Garmin eLog device uses the inspector's mobile device as a network access point to send inspection
information to FMCSA web services.

1 From the Garmin eLog app, select Inspection.
2 Select > Yes.
3 If necessary, enter an annotation.
4 Select Bluetooth.
5 Select Enable Pairing Mode.
6 Follow the on-screen instructions in the app to pair the Garmin eLog adapter with the inspector's mobile

device.

The inspection report transfers automatically after the pairing process is complete.

Diagnostics and Malfunctions

The Garmin eLog app records malfunctions and diagnostic events when the app detects critical functions that
do not conform to Federal Motor Carrier Safety Administration (FMCSA) specifications. When a malfunction is
detected, the driver and motor carrier are subject to responsibilities as directed by FMCSA guidelines.

Driver Responsibilities

• The driver must note the malfunction of the ELD and provide written notice of the malfunction to the motor
carrier within 24 hours.

• The driver must reconstruct the Record of Duty Status (RODS) for the current 24-hour period and the previous
7 consecutive days, and record the records of duty status on graph-grid paper logs that comply with 49 CFR

395.8, unless the driver already has the records or retrieves them from the ELD.

• The driver must continue to manually prepare RODS in accordance with 49 CFR 395.8 until the ELD is
serviced and returned to a compliant status.

Motor Carrier Responsibilities

• The motor carrier must correct, repair, replace, or service the malfunctioning ELD within eight days of
discovering the condition or a driver's notification to the motor carrier, whichever occurs first.

• The motor carrier must require the driver to maintain a paper RODS record until the ELD is back in service.

50 Garmin eLog

Viewing Diagnostics and Malfunctions

If the Garmin eLog adapter detects a diagnostic event or malfunction, an alert and an indicator appear in the
app. A diagnostic and malfunction indicator also appears in the status bar or near the top of every screen.

No diagnostic events or malfunctions are detected.

A diagnostic event was detected.

A malfunction was detected.

Diagnostic events and malfunctions were detected.

You can view information about these alerts at any time. This can be useful for correcting errors or adjusting
driver information.

Select the diagnostic or malfunction indicator.

The app displays information about the diagnostic or malfunction alert and provides recommendations for how
to correct it.

Diagnostic Definitions

Power Data Diagnostic Event: The adapter did not receive power, or was not fully functional, for a period of

time.

1

Check the vehicle diagnostic port connections.

2

Verify the adapter is firmly plugged into the vehicle diagnostic port.

3

Review all affected driver logs for missing or incorrect data.

Engine Synchronization Data Diagnostic Event: The adapter failed to synchronize with the vehicle engine

computer to record required engine data for driver logs.

1

Check the vehicle diagnostic port connections.

2

Verify the adapter is firmly plugged into the vehicle diagnostic port.

3

Review all affected driver logs for missing or incorrect data.

Missing Required Data Elements Data Diagnostic Event: The Garmin eLog system failed to obtain one or more

required data elements when recording driver logs.

1

Check the vehicle diagnostic port connections.

2

Verify the adapter is firmly plugged into the vehicle diagnostic port.

3

Check the Bluetooth settings on the device running the Garmin eLog app, and verify the device and the
adapter are connected.

4

Check the GPS settings on the device running the Garmin eLog app, and verify the device settings allow
location positions to be shared with the Garmin eLog app.

5

Review all affected driver logs for missing or incorrect data.

Data Transfer Data Diagnostic Event: A failure occurred with the method for transferring roadside inspection

reports.
Perform the following actions:

1

Check the Bluetooth settings on the device running the Garmin eLog app, and verify the device and the
adapter are connected.

2

Verify all USB storage devices used to transfer roadside inspection reports are operating correctly.

3

If you have not performed a data backup within the previous seven days, back up your recorded Garmin
eLog data to a USB storage device.

Unidentified Driving Records Data Diagnostic Event: At least 30 minutes of unidentified driving was recorded

within the current 24 hour period, and over the previous 7 days.

Garmin eLog 51

• Drivers: Review and claim the unidentified driving time.

• Administrator: Review and assign the unidentified driving time to the respective drivers.

Malfunction Definitions

Power Compliance Malfunction: The adapter did not receive power, or was not fully functional, for a period of

time. At least 30 minutes of driving time may not have been correctly recorded across all drivers over the
past 24 hours.

1

Check the vehicle diagnostic port connections.

2

Verify the adapter is firmly plugged into the vehicle diagnostic port.

3

Review all affected driver logs for missing or incorrect data.

Engine Synchronization Compliance Malfunction: The adapter failed to synchronize with the vehicle engine

computer to record required engine data for driver logs. At least 30 minutes of inaccurate data may have
been recorded across all drivers over the past 24 hours.

1

Check the vehicle diagnostic port connections.

2

Verify the adapter is firmly plugged into the vehicle diagnostic port.

3

Review all affected driver logs for missing or incorrect data.

Timing Compliance Malfunction: The Garmin eLog system failed to accurately verify the calendar date or time

of day required for driver logs.

1

Verify the adapter is firmly plugged into the vehicle diagnostic port.

2

Check the Bluetooth settings on the device running the Garmin eLog app, and verify the device and the
adapter are connected.

3

Check the date and time settings on the device running the Garmin eLog app.

4

Review all affected driver logs for missing or incorrect data.

Positioning Compliance Malfunction: The Garmin eLog system failed to acquire valid location positions

required for driver logs. At least 60 minutes of inaccurate data may have been recorded across all drivers
over the past 24 hours.

1

Verify the Garmin eLog app is running and a driver is logged in when driving the vehicle.

2

Check the Bluetooth settings on the device running the Garmin eLog app, and verify the device and the
adapter are connected.

3

Check the GPS settings on the device running the Garmin eLog app, and verify the device settings allow
location positions to be shared with the Garmin eLog app.

4

Review all affected driver logs for missing or incorrect data.

Data Recording Compliance Malfunction: The Garmin eLog system has reached the maximum storage capacity

for driver logs and cannot store or retrieve more logs.

1

Create a RODS report for each driver for record keeping (Exporting and Saving a Record of Duty Status

(RODS) Report, page 49).

2

Log in as an administrator.

3

Back up the system data (Backing Up Data, page 44).

4

Remove unneeded files from the storage of the device running the Garmin eLog app.

Data Transfer Compliance Malfunction: Multiple failures occurred with the method for transferring roadside

inspection reports.
Perform the following actions:

1

Check the Bluetooth settings on the device running the Garmin eLog app, and verify the device and the
adapter are connected.

2

Verify all USB storage devices used to transfer roadside inspection reports are operating correctly and are
formatted using the FAT32 file system.

3

If you have not performed a data backup within the previous seven days, back up your recorded Garmin
eLog data to a USB storage device.

52 Garmin eLog

Adapter Firmware Malfunction: A serious error occurred attempting to update the adapter firmware. Contact

Garmin customer support for further help.
Outdated adapter firmware may not maintain compliance. Garmin recommends keeping paper logs until the

adapter firmware is successfully updated.

Administrator Functions

NOTICE

The administrator account is critical for some app functions. Choose an administrator password you can
remember, and do not lose the password. The administrator password cannot be recovered without clearing all
app data, which causes all recorded Garmin eLog data to be deleted.

You must use the administrator account to perform some Garmin eLog app functions, including adding driver
profiles, editing driver profiles, and resetting driver passwords. The administrator account and password are
created during the initial Garmin eLog app setup. If the app is administered by a company, drivers may not have
access to the administrator functions.

Adding Driver Profiles

You must log in as an administrator to add driver profiles.

1 From the Garmin eLog app, select Add Driver.
2 Enter the administrator password.
3 Enter the driver and motor carrier information.
4 If the driver has an exempt status, select Exempt Driver.
5 If the driver is allowed to use the vehicle for personal conveyance, select Allow Personal Conveyance.
6 If the driver is allowed to make yard moves, select Allow Yard Moves.
7 Select Save.

The first time the driver logs into the new profile, the app prompts the driver to enter their driver license number
and create a password.

Editing a Driver Profile

An administrator can edit driver profiles to change driver privileges, reset profile passwords, or deactivate
profiles.

NOTE: The administrator can edit basic driver information in the driver profile, but the Garmin eLog app does not
support editing duty status records from the administrator account. To correct a duty status record, the driver
must log in to the driver profile and edit the record (Editing a Duty Status Record, page 48).

1 Log in to an administrator account.
2 Select a driver profile.
3 Select > Edit Profile.
4 Select an option:

• To edit driver information, select a field to update it.

• To reset the profile password, select Reset Password.

• To deactivate the profile, select Deactivate Profile.

Garmin eLog 53

Clearing Garmin eLog App Data

NOTICE

Clearing the Garmin eLog app data will cause all retained ELD data to be deleted from your dēzl device. It is the
responsibility of the driver and/or motor carrier to ensure ELD records are retained as required by applicable
regulations.

You can clear the Garmin eLog app data to restore the app to the original factory state. This requires you to set
up your Garmin eLog adaptor, administrator account, and all driver profiles again. Clearing the app data is also
the only way to reset a lost or forgotten administrator password.

1 Log in to a driver or administrator account, and back up all data (Backing Up Data, page 44).
2 Wait for the backup to complete.
3 From the home screen, select Settings > Device > Apps > eLog > Storage.
4 Select Clear Data.

Voice Command

NOTE: Voice command is not available for all languages and regions, and may not be available on all models.
NOTE: Voice Activated Navigation may not achieve desired performance when in a noisy environment.

Voice command allows you to use your device by saying words and commands. The voice command menu
provides voice prompts and a list of available commands.

Tips for Speaking to the Device

• Speak in a clear voice directed at the device.

• Start each request with OK, Garmin.

• Reduce background noise, such as voices or the radio, to help the device interpret your commands more
accurately.

• Respond to voice prompts from the device as needed.

• If you do not receive a useful response, try rephrasing your request.

• If the device does not respond to your requests, verify it is not placed near a speaker or air vent, which can
produce noise that interferes with the microphone.

Launching Garmin Voice-Activated Navigation

Garmin voice-activated navigation allows you to use plain language spoken requests to search for locations and
addresses, start routes with turn-by-turn directions, place hands-free phone calls, and more.

• Say OK, Garmin, and make a spoken request.
For example, you can say phrases like these:

◦ OK, Garmin, take me home.
◦ OK, Garmin, where's the library?

Checking Your Arrival Time

While a route is active, you can say a phrase to check your estimated time of arrival at your destination.

Say OK, Garmin, what time will we arrive?.

Placing a Phone Call Using Your Voice

You can use a voice command to call to a contact from the phone book of your paired smartphone.

Say OK, Garmin, call, and say the contact name.
For example, you can say OK, Garmin, call Mom..

54 Voice Command

Changing Device Settings Using Your Voice

You can say phrases like these to set device settings to a value from 0 to 10.

• OK, Garmin, increase the volume.

• OK, Garmin, set the volume to 0.

• OK, Garmin, set the volume to 9.

Using the Apps

Viewing the Owner's Manual on Your Device

You can view the complete owner's manual on the device screen in many languages.
1 Select > Tools > Owner's Manual.

The owner's manual appears in the same language as the software text (Setting the Text Language,

page 63).

2 Select to search the owner's manual (optional).

Viewing the Truck Map

The truck map highlights recognized truck routes on the map, such as the Surface Transportation Assistance
Act (STAA) preferred routes, TruckDown® (TD) preferred routes, and non-radioactive hazardous materials
(NRHM) routes. The recognized routes vary based on your area and the map data loaded on your device.

Select > dēzl > Truck Map.

Route Planner

You can use the route planner to create and save a route, which you can navigate later. This can be useful for
planning a delivery route, a vacation, or a road trip. You can edit a saved route to further customize it, including
reordering locations, adding suggested attractions, and adding shaping points.

You can also use the route planner to edit and save your active route.

Planning a Route

A route can include many locations, and it must include at least a starting location and one destination. The
starting location is the location from which you plan to start your route. If you start navigating the route from a
different location, the device gives you the option to route to your starting location first. For a round trip, the
starting location and final destination can be the same.

1 Select > dēzl > Route Planner > Create Route.
2 Select Select Start Location.
3 Choose a location for your starting point, and select Select.
4 Select Select Destination.
5 Choose a location for a destination, and select Select.
6 Select Add Location to add more locations (optional).
7 After you have added all the necessary locations, select Next > .
8 Enter a name, and select Done.

Using the Apps 55

Editing and Reordering Locations in a Route

1 Select Route Planner.
2 Select a saved route.
3 Select List.
4 Select a location.
5 Select an option:

• To change the location, select , and enter a new location.

• To move the location up or down, select , and drag the location to a new position in the route.

• To add a new location after the selected location, select .

• To remove the location, select .

Changing Routing Options for a Route

You can customize how the device calculates your route.

1 Select Route Planner.
2 Select a saved route.
3 Select .
4 Select an option:

• To add shaping points to your route, select Shaping, and select at least one location.

• To change the calculation mode for the route, touch a route segment, and select a calculation mode.

Navigating to a Saved Route

1 Select Route Planner.
2 Select a saved route.
3 Select Go!.
4 Select the first location to navigate to, and select OK.

The device calculates a route from your current location to the selected location, and then it guides you to
the remaining route destinations in order.

Editing and Saving Your Active Route

If a route is active, you can use the route planner to edit and save it.

1 Select Route Planner > My Active Route.
2 Edit your route using any of the route planner features.

The route recalculates each time you make a change.

3 Select Save to save your route, which you can navigate again later (optional).

Viewing Previous Routes and Destinations

Before you can use this feature, you must enable the travel history feature (Device Settings, page 64).
You can view your previous routes and places you have stopped on the map.

Select > dēzl > Trip History.

Viewing the Weather Forecast

Before you can use this feature, your device must be receiving weather data. You can connect your device to the
dēzl app to receive weather data.

1 From the home screen, select the weather widget (Home Screen, page 10).

The device shows the current weather conditions and a forecast for the next several days.

2 Select a day.

The detailed forecast for that day appears.

56 Using the Apps

Viewing Weather Near a Different City

1 Select > dēzl > Weather > Current Location.
2 Select an option:

• To view weather for a favorite city, select a city in the list.

• To add a favorite city, select Add City, and enter a city name.

Music Player

The media player allows your device to control the media currently playing from a media app on your paired
phone. You can open the media player at any time by selecting > Tools > Music from the main menu.

Information about the currently playing media, such as title, artist, album, station, or channel.

Progress through the current media item.

Playback controls. The controls change based on the service providing the media.

Select to hide or shrink the media player.

Adding the Music Player Tool to the Map

The music player map tool enables you to control the music player from your map.

1 Open the map.
2 Select > Music.

The music player controls appear on the map.

Using the Apps 57

Garmin PowerSwitch™ App

Power buttons

Opens the app settings menu

Enters editing mode to customize the app layout and functions

Turns off all outputs

Activates each connected output

Displays input voltage

Displays the total amperage of the selected Garmin PowerSwitch device

Displays the device name

Displays Garmin PowerSwitch device tabs and custom layout tabs

Activating a Power Switch

Before you can use the Garmin PowerSwitch app to activate a switch, you must install your Garmin
PowerSwitch device in your vehicle and pair it with the Garmin PowerSwitch app.

From the Garmin PowerSwitch app, select a power button to turn a switch on or off.

Turning Off All Switches

Select .

58 Using the Apps

Customizing a Button

1 From the Garmin PowerSwitch app screen, select .

The app enters editing mode.

2 Select on the button you want to customize.
3 Select an option:

• To change the name of the button, select the Button Label field, and enter a name.

• To add an icon to the button, select the Icon field, and select an icon.

• To change the button color, select a color.

• To change the button mode, select a button mode.

• To adjust the intensity of the switch, use the slider.

• To set the button to activate with a control input, select a control input.

4 Select .
5 Select Done.

Assigning a Switch to a Control Input

Before you can use control input functions, you must connect a control input to your Garmin PowerSwitch
device.

You can assign one or more switches to turn on when the Garmin PowerSwitch device receives a signal from a
control input.

1 Select .
2 Select your Garmin PowerSwitch device.
3 Select a control input.
4 Select one or more switches.

Adding a Custom Layout

You can add a custom layout tab to the Garmin PowerSwitch app. Buttons added to a custom layout can control
multiple switches at the same time.

1 From the Garmin PowerSwitch app, select .

The device enters editing mode.

2 Select .

Using the Apps 59

Adding a Button to a Custom Layout

1 From the Garmin PowerSwitch app, select a custom layout tab.
2 Select .

The app enters editing mode.

3 Select Add Button.
4 On the new button, select .
5 Select an option:

• To change the name of the button, select the Button Label field, and enter a name.

• To add an icon to the button, select the Icon field, and select an icon.

• To change the button color, select a color.

6 Select Add Action.
7 If necessary, select a Garmin PowerSwitch device and a switch.
8 Select an action:

• To set the button to turn the switch on or off with each press, select Toggle.

• To set the button to turn on the switch, select Turn On.

• To set the button to turn off the switch, select Turn Off.

9 Select a button mode:

• To set the button to activate with one touch, select Normal.

• To set the button to activate only while touching the button, select Momentary.

• To set the button to turn on and off repeatedly, select Strobe, and select time intervals.

10 If applicable, use the slider to set the brightness of lights.
11 Select .
12 If necessary, select Add Action to add additional actions for the button.

You can add one action for every switch on the Garmin PowerSwitch device.

Arranging Buttons In a Custom Layout

1 From the Garmin PowerSwitch app, select a custom layout tab.
2 Select .

The app enters editing mode.

3 On the button you want to move, hold , and drag the button to a new location.

Deleting a Custom Layout or Button

1 From the Garmin PowerSwitch app, select a custom layout tab.
2 Select .

The app enters editing mode.

3 Select an option:

• To delete a button, select on the button you want to delete.

• To delete a layout tab, select on the layout tab.

Routines

Routines automate your Garmin PowerSwitch device. When you define a routine on your compatible Garmin
navigation device, it turns switches on or off automatically when the conditions of the routine are met. For
example, you can set a routine to turn on a switch at specific time each day or when your vehicle reaches a
specific speed. Routines are available only when using a compatible Garmin navigation device.

60 Using the Apps

Adding a Routine

1 From the Garmin PowerSwitch app, select > Routines.
2 If necessary, select Add Routine.
3 Select When.
4 Select a trigger:

• To set a switch to trigger when your vehicle reaches a specific speed, select Speed > Next, and follow the
on-screen instructions to enter speed thresholds.

• To set a switch to trigger at a specific time each day, select Time > Next, and enter a time.

• To set a switch to trigger at sunrise, select Sunrise.

• To set a switch to trigger at sunset, select Sunset.

5 Select Add Action.
6 Select a device, a switch, an action, and a button mode.
7 If necessary, use the slider to adjust the dimmer.
8 Select Save.

Editing a Routine

1 From the Garmin PowerSwitch app, select > Routines.
2 Select on the routine you want to edit.
3 Select an option:

• To change the trigger for the routine, select When, and select a trigger.

• To change an action, select on the action you want to change, and update the action.

• To add an action to the routine, select Add Action, and enter information about the action.

4 Select Save.

Deleting a Routine

1 From the Garmin PowerSwitch app, select > Routines.
2 Select on the routine you want to delete.

Settings

Navigation Settings

Select Settings > Navigation.
Calculation Mode: Sets the route calculation method.
Avoidances: Sets road features to avoid on a route.
Custom Avoidances: Allows you to avoid specific roads or areas.
Restricted Mode: Disables all functions that require significant operator attention.
Voice Language: Sets the language for navigation voice prompts.
Travel History: Allows the device to store a record of the places you go. This allows you to view the trip log, use

the Trip History feature, and use myTrends suggested routes.

Clear Travel History: Allows you to clear all travel history from the device.

Settings 61

Map and Vehicle Settings

Select Settings > Map Display.
Map Vehicle Icon: Sets the vehicle icon that represents your position on the map.
Driving Map View: Sets the perspective on the map.
Map Detail: Sets the level of detail on the map. More detail may cause the map to draw slower.
Map Theme: Changes the color of the map data.
Map Layers: Sets the data that appears on the map page (Customizing the Map Layers, page 34).
Auto Zoom: Automatically selects the zoom level for optimal use of your map. When disabled, you must zoom

in or out manually.

Units: Sets the unit of measure used on the map.
myMaps: Sets which installed maps the device uses.

Enabling Maps

You can enable map products installed on your device.

TIP: To purchase additional map products, go to garmin.com/maps.
1 Select Settings > Map Display > myMaps.
2 Select a map.

Connecting to a Wireless Network

1 Select Settings > Wireless Networks > Wi-Fi.
2 If necessary, select the toggle switch to turn on wireless network technology.
3 Select a wireless network.
4 If necessary, enter the encryption key.

The device connects to the wireless network. The device remembers the network information and connects
automatically when you return to this location in the future.

Enabling Bluetooth Wireless Technology

Select Settings > Wireless Networks > Bluetooth.

Driver Assistance Settings

Select Settings > Driver Assistance.
Driver Alerts: Enables an audible alert for each type of driver alert (Driver Awareness Features and Alerts,

page 14).

Proximity Alerts: Alerts you when you approach speed cameras or red light cameras.
Route Preview: Shows a preview of the major roads in your route when you start navigation.
Break Planning: Enables break planning features that monitor your driving time, suggest breaks, and show

upcoming services.

Traffic Settings

From the main menu, select Settings > Traffic.
Traffic: Enables the traffic feature.
Current Provider: Sets the traffic provider to use for traffic data. The Auto option selects the best available

traffic data automatically.

Subscriptions: Lists the current traffic subscriptions.
Optimize Route: Enables the device to use optimized alternate routes automatically or upon request (Avoiding

Traffic Delays on Your Route, page 28).

62 Settings

Display Settings

Select Settings > Device > Display.
Brightness level: Sets the display brightness level on your device.
Dark theme: Enables or disables the dark color theme.
Wallpaper: Sets the wallpaper background on your device.
Screen timeout: Allows you to set the amount of idle time before your device turns off the display while using

battery power.

Font size: Increases or decreases the font size on your device.
Auto-rotate screen: Enables the screen to rotate automatically between portrait and landscape display modes

based on the device orientation or remain in the current orientation.

Sound and Notification Settings

Select Settings > Device > Sound & Notification.
Volume Sliders: Set the volume levels for navigation, media, calls, alarms, and notification alerts.
Do Not Disturb: Sets the rules for the automatic do-not-disturb feature. This feature allows you to disable

audible alerts during specific times or events.

Default notification sound: Sets the default notification ringtone sound on your device.
Default alarm sound: Sets the default alarm sound on your device.
Other sounds: Allows you to enable or disable sounds for other device interactions, such as screen touches,

screen locking, or charging.

Adjusting Sound and Notification Volume

1 Select Settings > Device > Sound & Notification.
2 Use the slider bars to adjust the sound and notification volume.

Enabling or Disabling Location Services

The location services feature must be enabled for your device to find your location, calculate routes, and provide
navigational assistance. You can disable location services to plan a route when GPS signals are not available.
When location services are disabled, the device enables a GPS simulator to calculate and simulate routes.

TIP: Disabling location services can help save battery power.
1 Select Settings > Personal > Location.
2 Select the toggle switch to enable or disable location services.

Setting the Text Language

You can select the language for text in the device software.

1 Select Settings > Personal > Language & Input > Language.
2 Select a language.

Date and Time Settings

Select Settings > System > Date & Time.
Use network-provided time: Automatically sets the time zone based on information from the connected

network.

Use network-provided time zone: Sets the time zone on your device when Use network-provided time is

disabled.

Use 24-hour format: Enables or disables the 24-hour time format.

Settings 63

Device Settings

Select Settings > About Device.
Legal Information: Allows you to view the end-user license agreement (EULA) and software license information.
Regulatory information: Displays e-label regulatory and compliance information.
Garmin device information: Displays hardware and software version information.

Device Information

Viewing E-label Regulatory and Compliance Information

1 From the settings menu, swipe to the bottom of the menu.
2 Select About Device > Regulatory information.

Specifications

Operating temperature range From -20° to 60°C (from -4° to 131°F)

Charging temperature range From 0° to 45°C (from 32° to 113°F)

Power input

Battery type Rechargeable lithium-ion

Vehicle power using the included vehicle power cable. AC power using an
optional accessory (for home and office use only).

Charging the Device

NOTE: This Class III product shall be powered by an LPS power supply.
You can charge the battery in the device using any of these methods.

• Install the device in the mount, and connect the mount to vehicle power.

• Connect the device to an optional power adapter accessory, such as a wall power adapter.
You can purchase an approved Garmin AC-DC adapter suitable for home or office use from a Garmin dealer

or www.garmin.com. The device may charge slowly when connected to a third-party adapter.

Device Maintenance

Garmin Support Center

Go to support.garmin.com for help and information, such as product manuals, frequently asked questions,
videos, and customer support.

64 Device Information

Updating Maps and Software Using a Wi‑Fi Network

NOTICE

Map and software updates may require the device to download large files. Regular data limits or charges from
your internet service provider apply. Contact your internet service provider for more information about data
limits or charges.

You can update the maps and software by connecting your device to a Wi‑Fi network that provides access to
the internet. This allows you to keep your device up to date without connecting it to a computer.

1 Using the included USB cable, connect the device to external power.

NOTE: A USB power adapter is not included. Go to the product page on garmin.com to purchase a power

adapter accessory.

2 Connect the device to a Wi‑Fi network (Connecting to a Wireless Network, page 62).

While connected to a Wi‑Fi network, the device checks for available updates automatically and displays a
notification when an update is available.

3 Select an option:

• When an update notification appears, swipe down from the top of the screen, and select An update is
available..

• To manually check for updates, select Settings > Updates.

The device displays available map and software updates. When an update is available, Update Available
appears below Map or Software.

4 Select an option:

• To install all available updates, select Download.

• To install only map updates, select Map.

• To install only software updates, select Software.

5 If necessary, read the license agreements, and select Accept All to accept the agreements.

NOTE: If you do not agree with the license terms, you can select Reject. This stops the update process. You

cannot install updates until you accept the license agreements.

6 Keep the device connected to external power and within range of the Wi‑Fi network until the update process

is complete.

TIP: If a map update is interrupted or canceled before it completes, your device may be missing map data. To
repair missing map data, you must update the maps again.

Device Maintenance 65

Updating Maps and Software with Garmin Express

You can use the Garmin Express application to download and install the latest map and software updates for
your device.

1 If you do not have the Garmin Express application installed on your computer, go to garmin.com/express and

follow the on-screen instructions to install it (Installing Garmin Express, page 67).

2 Open the Garmin Express application.
3 Connect your device to your computer using a USB cable.

The small end of the cable connects to the USB port on your dēzl device, and the large end connects to an
available USB port on your computer.

4 When your dēzl device prompts you to enter file transfer mode, select Continue.
5 In the Garmin Express application, click Add a Device.

The Garmin Express application searches for your device and displays the device name and serial number.

6 Click Add Device, and follow the on-screen instructions to add your device to the Garmin Express application.

When setup is complete, the Garmin Express application displays the updates available for your device.

66 Device Maintenance

7 Select an option:

• To install all available updates, click Install All.

• To install a specific update, click View Details, and click Install next to the update you want.

The Garmin Express application downloads and installs the updates onto your device. Map updates are very
large, and this process may take a long time on slower internet connections.

NOTE: If a map update is too large for the internal storage of the device, the software may prompt you to
install a microSD® card in your device to add storage space (Installing a Memory Card for Maps and Data,

page 78).

8 Follow the on-screen instructions during the update process to finish installing updates.

For example, during the update process, the Garmin Express application may instruct you to disconnect and
reconnect your device.

Installing Garmin Express

The Garmin Express application is available for Windows® and Mac® computers.

1 On your computer, go to garmin.com/express.
2 Select an option:

• To view the system requirements and verify the Garmin Express application is compatible with your
computer, select System Requirements.

• To install on a Windows computer, select Download for Windows.

• To install on a Mac computer, select Download for Mac.

3 Open the downloaded file, and follow the on-screen instructions to complete the installation.

Device Care

NOTICE

Avoid dropping your device.
Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause

permanent damage.
Never use a hard or sharp object to operate the touchscreen, or damage may result.
Do not expose the device to water.

Cleaning the Outer Casing

NOTICE

Avoid chemical cleaners and solvents that can damage plastic components.

1 Clean the outer casing of the device (not the touchscreen) using a cloth dampened with a mild detergent

solution.

2 Wipe the device dry.

Cleaning the Touchscreen

1 Use a soft, clean, lint-free cloth.
2 If necessary, lightly dampen the cloth with water.
3 If using a dampened cloth, turn off the device and disconnect the device from power.
4 Gently wipe the screen with the cloth.

Avoiding Theft

• Remove the device and mount from sight when not in use.

• Remove the residue left on the windshield by the suction cup.

• Do not keep your unit in the glove compartment.

• Register your device using the Garmin Express software (garmin.com/express).

Device Maintenance 67

Resetting the Device

You can reset your device if it stops functioning.

Hold the power key for 12 seconds.

Removing the Device, Mount, and Suction Cup

Removing the Mount from the Suction Cup

1 Loosen the nut that secures the magnetic powered mount to the suction cup ball.
2 Turn the device mount to the right or left.
3 Apply pressure until the socket on the mount releases the ball on the suction cup.

Removing the Suction Cup from the Windshield

1 Flip the lever on the suction cup toward you.
2 Pull the tab on the suction cup toward you.

Troubleshooting

The suction cup will not stay on my windshield

1 Clean the suction cup and windshield with rubbing alcohol.
2 Dry with a clean, dry cloth.
3 Mount the suction cup (Mounting and Powering the Device in Your Vehicle, page 3).

The mount does not hold my device in place while I drive

For the best results, you should keep the vehicle mount clean and position the device close to the suction cup.
If the device shifts position while you are driving, you should complete these actions.

• Remove the powered mount from the suction cup arm, and wipe the ball and socket with a cloth.
Dust and other debris may reduce the friction in the ball and socket joint and allow the joint to shift while you

are driving.

• Rotate the hinged arm toward the suction cup as far as your windshield angle allows.
Positioning the device closer to the windshield reduces the effect of jarring and vibration from the road.

My device is not acquiring satellite signals

• Verify the location services feature is enabled (Enabling or Disabling Location Services, page 63).

• Take your device out of parking garages and away from tall buildings and trees.

• Remain stationary for several minutes.

The device does not charge in my vehicle

• Verify the vehicle is turned on and is supplying power to the power outlet.

• Verify the interior temperature of the vehicle is within the charging temperature range indicated in the
specifications.

• In the vehicle fuse box, verify the fuse for the vehicle power outlet is not broken.

68 Troubleshooting

My battery does not stay charged for very long

• Decrease the screen brightness (Display Settings, page 63).

• Shorten the display timeout (Display Settings, page 63).

• Decrease the volume (Adjusting Sound and Notification Volume, page 63).

• Turn off the wi-fi radio when it is not in use (Connecting to a Wireless Network, page 62).

• Put the device in power saving mode when not in use (Turning the Device On or Off, page 9).

• Keep your device away from extreme temperatures.

• Do not leave your device in direct sunlight.

My device does not connect to my phone

• Select Settings > Bluetooth.
The Bluetooth option must be enabled.

• Enable Bluetooth wireless technology on your phone and bring your phone within 10 m (33 ft.) of the device.

• Verify your phone is compatible.
Go to www.garmin.com/bluetooth for more information.

• Complete the pairing process again.
To repeat the pairing process, you must unpair your phone and device (Deleting a Paired Phone, page 38), and

complete the pairing process.

Appendix

Garmin PowerSwitch

WARNING

Garmin strongly recommends having an experienced installer with the proper knowledge of electrical systems
install the device. Incorrectly wiring the power cable can result in damage to the vehicle or the battery and can
cause bodily injury.

You can use a connected Garmin PowerSwitch device to control lights, fans, and more from your dēzl device.

Mounting Considerations

• The device must be mounted close to the battery and within the range of the supplied power cable.

• The mounting surface must be strong enough to support the weight of the device.

• The location must allow room for the routing and connection of all cables.

Appendix 69

Mounting the Device

Before you can mount the device, you must select a mounting location and purchase the appropriate hardware
for your mounting surface.

NOTICE

Avoid wires, gauges, air bags, air bag covers, HVAC, and other items when drilling pilot holes and attaching the
mount to the vehicle. Garmin is not responsible for any damages or consequences arising from the installation.

1 Place the mount on the selected location.

2 Using the mount as a template, mark the two screw locations .
3 Drill pilot holes (optional).

For some types of mounting material, drilling pilot holes is necessary. Do not drill through the mount.

4 Securely fasten the mount to the surface using the appropriate hardware for your mounting surface.

70 Appendix

Opening the Front Cover

You must open the front cover to make electrical connections.

1 Lift the front cover latch and rotate it counter-clockwise.

2 Pull the front cover off of the device.

Appendix 71

Connecting Accessories

NOTICE

Do not use the device to control or power a winch. Failure to follow this notice could cause damage to your
vehicle or your device.

Do not connect a power source to an accessory output terminal. Failure to follow this notice could cause
damage to your vehicle or your device.

Accessory requirements:

• Verify the amperage rating of each accessory before wiring it to the Garmin PowerSwitch device. The device
supports accessories up to 30 A for each channel and a maximum of 100 A for the entire system.

• Use 10 AWG (6 mm2) wires for accessories that use 20 to 30 A.

• Use 12 AWG (4 mm2) wires for accessories that use 10 to 20 A.

• Use 14 AWG (2.5 mm2) wires for accessories that use less than 10 A.

• Use the appropriate size terminals for all accessory connections.

• Crimp all terminal connectors securely.

1 Connect the positive wire from the accessory to one of the accessory terminals on the Garmin

PowerSwitch device.

2 Connect the negative or ground wire to an unpainted ground stud on the vehicle frame, to a ground

distribution block, or directly to the negative terminal on the battery.

72 Appendix

CAUTION

Do not connect the accessory ground wires to the ground terminal (GND) on the Garmin PowerSwitch device,
as doing so could result in personal injury or property damage, or could negatively impact device
functionality.

3 Verify that all electrical connections are tight and will not come loose during use.

Connecting a Control Input

You can connect to the control terminals to enable the Garmin PowerSwitch device to turn on customizable
outputs. For example, you can connect your vehicle ignition switch to a control input terminal to turn on
accessories automatically each time you start your vehicle. The control terminals detect a signal from 3.3 V to
18 V. You can configure output functions with the Garmin PowerSwitch app.

Connect the control wire from the control source in your vehicle to one of the two control terminals on the
Garmin PowerSwitch device.

Connecting the Device to Vehicle Power

Before you can connect the device to vehicle power, you must remove the warning tag from the +12V terminal
on the device.

You should always confirm all electrical connections are secure and will not come loose while operating the
device.

1 Connect the large ring end of the included ground wire to the negative terminal on the vehicle battery.

2 Connect the small ring end of the ground wire to the GND terminal on the device.

Appendix 73

3 Connect the small ring end of the included 12V cable to the +12V terminal on the device.
4 Tighten the 3/8 in. nut on the +12V terminal to a maximum torque specification of 4.52 N-m (40 lbf-in.).

You should confirm the nut cannot be loosened by hand.

NOTICE

Do not overtighten the +12V terminal to prevent damage to the terminal.

5 Connect the large ring end of the 12V cable to the positive terminal on the vehicle battery.

Pairing with a Garmin Navigation Device

You can pair your Garmin PowerSwitch device with a compatible Garmin navigation device.
1 Turn on power to your Garmin PowerSwitch device, and place your compatible Garmin navigation device

within 1 m (3.3 ft.) of it.

2 On your compatible navigation device, open the Garmin PowerSwitch app.
3 Follow the on-screen instructions to complete the pairing and setup process.

The main app dashboard appears. After the devices are paired, they connect automatically when they are turned
on and within range.

Garmin PowerSwitch Specifications

Dimensions (D x W x H) 75 x 125 x 32 mm (2.95 x 4.92 x 1.26 in.)

Operating temperature range From -25° to 85°C (from -13° to 185°F)

Wireless frequency 2.4 GHz @ +15 dBm

Power input From 12 to 16 V using the included vehicle power cable.

Maximum accessory output 30 A

Maximum system output 100 A

Current draw with all outputs off 3 mA

Water rating IEC 60529 IPX7

1

Troubleshooting

My Garmin PowerSwitch will not stay connected

• Verify the Garmin PowerSwitch device is receiving power.

• Verify that Bluetooth technology is enabled on your paired navigation device or smartphone.

• Move the navigation device or smartphone closer to your Garmin PowerSwitch device.

• Verify that your vehicle's battery is supplying at least 12 V of power.
The Garmin PowerSwitch device turns off all outputs automatically to preserve your vehicle's battery if it is

receiving less than 11 V of power (My accessories are not receiving power, page 75).

1

The device withstands incidental exposure to water of up to 1 m for up to 30 min. For more information, go to www.garmin.com/waterrating.

74 Appendix

My accessories are not receiving power

• Verify the Garmin PowerSwitch device is receiving power from the vehicle battery.

• Verify that your vehicle's battery is supplying at least 12 V of power.
The Garmin PowerSwitch device turns off all outputs automatically to preserve your vehicle's battery if it is

receiving less than 11 V of power. Outputs turn back on when the device detects more than 12 V of power.

• Verify that all electrical connections are secure and will not come loose while operating the vehicle.

• Verify that each connected accessory draws less than 30 A.
If an accessory draws more than 30 A, the device turns off that output automatically.

• Verify that the total system load is less than 100 A.
If the device detects a system load of more than 100 A, it turns off all outputs automatically.

• Inspect all electrical connections for an electrical short circuit.

Wireless Cameras

Your device can display the video feed from one or more connected wireless cameras (sold separately).

Pairing a BC™ 50 Backup Camera with a Garmin Navigation Device

Before you can connect to a camera you must enable the Wi‑Fi setting on your Garmin navigation device.
The BC 50 wireless backup camera is compatible with some Garmin navigation devices with Android. Go to

garmin.com/bc50 for more information about device compatibility.

You can pair up to four BC 50 wireless backup cameras with your compatible Garmin navigation device.
1 Update your navigation device to the latest software.

Your device may not support the BC 50 camera without the latest software. For more information about
updating the software, see the owner's manual for your navigation device.

2 Turn on the Garmin navigation device, and bring it within 3 m (10 ft.) of the camera.
3 Place the vehicle in reverse to power the camera.
4 Select > Tools > Cameras > > BC50.
5 Select your BC 50 camera from the list of available cameras.
6 Position the guidance lines using the on-screen arrows.

If the camera or vehicle is not ideally positioned to complete the guidance line alignment, you can complete

the alignment later.
7 Select Save.
After you complete the pairing process with a camera for the first time, the camera and navigation device

connect automatically when they are turned on and within range.

Appendix 75

Connecting a Wired Backup Camera

To connect a wired backup camera, you must use an optional video mount accessory, which includes a 3.5 mm
composite video input jack. Go to garmin.com to purchase an accessory mount. The video mount accessory is
included with some device models.

You can connect a wired backup camera and view the output on the device screen.

1 Replace the original device mount with the video mount accessory.
2 Plug the camera video cable into the video input jack on the mount.

Viewing the Backup Camera

WARNING

This device is intended to enhance your situational awareness when used properly. If used improperly, you
could become distracted by the display, which could lead to an accident causing serious personal injury or
death. Only access the information displayed on the device with a glance. Always maintain awareness of your
surroundings and do not stare at the display or become distracted by the display. Focusing on the display could
prevent you from avoiding obstacles or hazards.

After you pair your camera with a compatible Garmin navigation device, the camera view appears automatically
when you turn on your navigation device, and you can manually show the camera at any time.

• If your navigation device is connected to an ignition-switched power outlet (recommended), turn on your

vehicle.

• If your navigation device is connected to an always-on power outlet, turn on the navigation device.

• To show the camera manually, select .

• To show or hide the camera using voice commands, say Show Video or Hide Video.

NOTE: Voice commands are not available on all navigation devices. The voice commands may vary based on
your navigation device model. This feature is not available for all languages or may require additional
navigation device setup for some languages. For more information, see the OK, Garmin app on your
navigation device, or the navigation device owner's manual.

The camera view appears. When the camera detects the vehicle is moving forward, the camera automatically
stops sending video, and the navigation device returns to normal operation. The camera video is dismissed
automatically after 2 minutes and 30 seconds, whether or not your vehicle has moved forward.

Switching Cameras

When multiple backup cameras are transmitting to your device, you can switch between the views from the
cameras.

1 Select > Tools > Cameras.
2 Select a camera from the bottom of the screen.

The video feed from the camera appears.

76 Appendix

Changing the Camera Orientation

Depending on where the camera is placed on your vehicle, the video on your device may appear upside down or
mirrored by default. You can rotate the video horizontally or flip the video vertically to correct the video.

1 From the camera view, select an option:

• Select > Adjust Video.

• Tap the screen, and select .

2 Select to reverse the image or to flip the image.
3 Select .

Connecting a Dash Camera to the Powered Mount

WARNING

It is your responsibility to ensure the mounting location complies with all applicable laws and ordinances, and
does not block your view of the road to ensure safe operation of your vehicle.

Before you connect a dash camera to the powered mount, you should mount the dash camera device to your
windshield.

You can use the dēzl device mount to power a compatible Garmin dash camera. This can be useful if you need
to connect the dēzl device and the dash camera to the same power source in your vehicle.

1 Mount the dēzl device in your vehicle, and connect it to power (Mounting and Powering the Device in Your

Vehicle, page 3).

2 If necessary, remove the dēzl device from the magnetic mount for a better view of the USB port.
3 Plug the dash camera's power cable into the USB port on the mount.

Data Management

The device has a memory card slot for additional data storage.
NOTE: The device is compatible with Windows 7 and newer, and Mac OS 10.7 and newer. Apple computers may

require additional third-party software to read and write files.

Appendix 77

About Memory Cards

You can purchase memory cards from an electronics supplier, or purchase pre-loaded Garmin mapping
software (www.garmin.com). Memory cards can be used to store files such as maps and custom POIs.

Installing a Memory Card for Maps and Data

You can install a memory card to increase the storage space for maps and other data on your device. You can
purchase memory cards from an electronics supplier. The device supports microSD memory cards from 4 to
256 GB. Memory cards must use the FAT32 file system format. Memory cards greater than 32 GB must be
formatted using the device (Formatting the Memory Card, page 78).

1 Locate the map and data memory card slot on your device (Device Overview, page 1).
2 Insert a memory card into the slot.
3 Press it in until it clicks.

Formatting the Memory Card

The device requires a memory card formatted using the FAT32 file system. You can use the device to format
your card using this file system.

You must format a brand new memory card if it is not formatted using the FAT32 file system.

NOTE: Formatting the memory card deletes all data on the card.
1 Select Settings > Device > Storage & USB.
2 Select your memory card.
3 Select > Settings > Format > ERASE & FORMAT.
4 Select Done.

Connecting the Device to Your Computer

You can connect the device to your computer using a USB cable.

1 Plug the small end of the USB cable into the port on the device.
2 Plug the larger end of the USB cable into a port on your computer.
3 When your dēzl device prompts you to enter file transfer mode, select Continue.

Depending on your computer operating system, the device appears as either a portable device, a removable
drive, or a removable volume.

Transferring Data From Your Computer

1 Connect the device to your computer (Connecting the Device to Your Computer, page 78).

Depending on your computer operating system, the device appears as either a portable device, a removable

drive, or a removable volume.

2 On your computer, open the file browser.
3 Select a file.
4 Select Edit > Copy.
5 Browse to a folder on the device.

NOTE: For a removable drive or volume, you should not place files in the Garmin folder.
6 Select Edit > Paste.

Purchasing Additional Maps

1 Go to your device product page at garmin.com.
2 Click the Maps tab.
3 Follow the on-screen instructions.

Purchasing Accessories

• Optional accessories are available at garmin.com or from your Garmin dealer.

78 Appendix

support.garmin.com

GUID-162C838D-5D61-40B4-A682-BFB8E574A22A v2June 2022