Garmin II Plus Quick Start Guide
2
Quick Reference Guide
PPOOWWEERR OONN SSEEQQUUEENNCCEE
MMAAIINN PPAAGGEE SSEEQQUUEENNCCEE
DDAATTAA EE NNTTRRYY
SSCCRREEEENN OORRIIEENNTTAATTIIOONN
PPOOWWEERR OOFFFF CCOONNTTRRAA SSTT
Press and hold
PPOOWWEERR
key to turn the unit on.
Status Page will appear while the unit gathers satellite information.
Once operational, the Position Page will replace the Status Page.
Press and hold
PPOOWWEERR
key for three seconds.
From Satellite Status Page,
press
RIGHT
or
LEFT
on
the
RROOCCKKEERR KKEEYYPPAADD
.
Press
EENNTTEERR
to confirm.
Status Page Position Page
Menu PageActive Route PageNavigation PageMap PagePosition PageSatellite Status Page
To start data entry, highlight the desired field using the rocker
KKEEYYPPAADD
.
Press
EENNTTEERR
to access the data field.
Use the
RROOCCKKEERR KKEEYYPPAADD
to select alphanumeric characters and menu options.
Press
EENNTTEERR
to confirm
MMAARRKK PPOOSSIITTIIOONN
From any page (except initial power on) press and
hold the
PPAAGGEE
. key.
Repeat sequence to switch back to original display.
GGOO TTOO WWAAYY PPOOIINNTT
Press
MMAARRKK
to
capture present
location.
Press
EENNTTEERR
to confirm.
Press the
GGOOTTOO
key.
Select the waypoint
name from the list.
Press
EENNTTEERR
to con-
firm the selection.
TTRRAACCBBAACCKK NNAAVVIIGGAATTIIOONN
Press the
GGOOTTOO
key.
Select the
TRACBACK
at the
bottom of the page.
Press
EENNTTEERR
to confirm the
selection.
GARMIN International1200 E. 151st StreetOlathe, KS 66062 USA
GARMIN (Europe) LTDUnit 5, The Quadrangle, Abbey Park Industrial Estate Romsey S051 9AQ
GARMIN (Asia) Corp.4th Fl, No 1, Lane 45Pao-Hsin Tien, Taiwan R.O.C.
Fold
Fold
Fold
Fold
Fold
GGPPSS IIII PPLLUUSS KKEEYYPPAADD UUSSAAGGEE OOPPEE RRAATTIIOONN FFLLOOWW CCHHAARRTT
Turns the unit on and off and controls the
3-level backlighting.
Scrolls the main pages in sequence and
returns display from a submenu. Press and
hold to change screen orientation.
Controls the movement of the cursor and is
used to select menu options and enter data.
Displays the GOTO waypoint list, allowing
you to select a destination waypoint.
Activates highlighted data fields and confirms selections and data entry.
Adjusts the map scale up and down.
Returns display to a previous page or
restores a data fields previous value.
Press to capture you present position as a
waypoint.
190-00130-01 Rev. A © 1998 GARMIN CORPORATION
Fold
Fold
Fold
Loading...