Garmin GPSMAP 751xs, GPSMAP 751, GPSMAP 741xs, GPSMAP 741, GPSMAP 721xs User Manual

...

GPSMAP® 500/700 Series and echoMAP™ 50/70

Series

Owner’s Manual

March 2016 190-01556-10_0E

All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.

Garmin®, the Garmin logo,

BlueChart USA and other countries. echoMAP™, Garmin Helm™, These trademarks may not be used without the express permission of Garmin.

Android™ is a trademark of Google Inc. The

, g2 Vision®, GPSMAP®, MapSource®, and Ultrascroll® are trademarks of Garmin Ltd. or its subsidiaries, registered in the

Bluetooth

™

GMR

word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is

, GXM™, HomePort™, and Meteor™ are trademarks of Garmin Ltd. or its subsidiaries.

GSD

under license. FUSION-Link™ is a trademark of Fusion Electronics Ltd. iOS® is a registered trademark of Cisco Systems, Inc. used under license by Apple Inc. iPod® is a trademark of Apple Inc., registered in the U.S. and other countries. microSD™ and the microSDHC logo are trademarks of SD-3C, LLC. NMEA®, NMEA 2000®, and the NMEA 2000 logo are registered trademarks of the National Marine Electronics Association. SiriusXM® is a registered trademark of SiriusXM Radio Inc. Wi‑Fi® is a registered trademark of W-Fi Alliance. Windows® is a registered trademark of Microsoft Corporation in the United States and other countries. Other trademarks and trade names are those of their respective owners.

Introduction.....................................................................1

echoMAP 70 Series and GPSMAP 700 Series.......................... 1

Using the Touchscreen.......................................................... 1

echoMAP 50 Series and GPSMAP 500 Series.......................... 1

Device Keys........................................................................... 1

Downloading the Manuals.......................................................... 1

Manual Conventions................................................................... 1

Getting More Information............................................................ 1

Inserting Memory Cards............................................................. 1

Software Update......................................................................... 2

Loading the New Software on a Memory Card...................... 2

Updating the Device Software............................................... 2

GPS Satellite Signals..................................................................2

Selecting the GPS Source..................................................... 2

Customizing the Chartplotter........................................ 2

Customizing the Home Screen................................................... 2

Setting the Vessel Type.............................................................. 2

Adjusting the Backlight............................................................... 2

Adjusting the Color Mode........................................................... 2

Hiding and Showing the Menu Bar............................................. 2

Communication with Wireless Devices........................ 2

Setting Up the Wi‑Fi® Wireless Network.................................... 3

Connecting a Wireless Device to the Chartplotter...................... 3

Changing the Wireless Channel................................................. 3

Using the Garmin Helm App with the Chartplotter...................... 3

Connecting a Bluetooth Wireless Device................................... 3

Disconnecting a Bluetooth Wireless Device............................... 3

Charts and 3D Chart Views........................................... 3

Navigation Chart and Offshore Fishing Chart............................. 3

Zooming In and Out of the Chart........................................... 4

Panning the Chart.................................................................. 4

Selecting an Item on the Map Using the Device Keys........... 4

Measuring a Distance on the Chart....................................... 4

Chart Symbols....................................................................... 4

Navigating to a Point on the Chart......................................... 4

Viewing Location and Object Information on a Chart............ 4

Viewing Details about Navaids.............................................. 4

Selecting a Map..................................................................... 4

Heading Line and Angle Markers.......................................... 4

Premium Charts.......................................................................... 5

Viewing Tide Station Information........................................... 5

Showing Satellite Imagery on the Navigation Chart.............. 5

Viewing Aerial Photos of Landmarks..................................... 6

Garmin Quickdraw™ Contours Mapping.................................... 6

Mapping a Body of Water Using the Garmin Quickdraw

Contours Feature................................................................... 6

Adding a Label to a Garmin Quickdraw Contours Map......... 6

Garmin Quickdraw Contours Settings....................................6

Automatic Identification System..................................................6

AIS Targeting Symbols.......................................................... 6

Heading and Projected Course of Activated AIS Targets...... 7

Showing AIS Vessels on a Chart or 3D Chart View.............. 7

Activating a Target for an AIS Vessel.................................... 7

Viewing a List of AIS Threats................................................. 7

Setting the Safe-Zone Collision Alarm................................... 7

AIS Distress Signals.............................................................. 7

Turning Off AIS Reception..................................................... 8

Chart and 3D Chart View Settings.............................................. 8

Navigation and Fishing Chart Setup...................................... 8

Waypoints and Tracks Settings on the Charts and Chart

Views..................................................................................... 8

Laylines Settings.................................................................... 8

Overlay Numbers Settings..................................................... 8

Showing a Navigation Inset................................................... 8

Chart Appearance Settings.................................................... 9

Setting the Heading and Course Over Ground Lines............ 9

Other Vessels Settings on the Charts and Chart Views........ 9

Fish Eye 3D Settings............................................................. 9

Navigation with a Chartplotter.................................... 10

Basic Navigation Questions...................................................... 10

Destinations.............................................................................. 10

Searching for a Destination by Name.................................. 10

Selecting a Destination Using the Navigation Chart............ 10

Searching for a Marine Services Destination....................... 10

Stopping Navigation................................................................. 10

Waypoints................................................................................. 10

Marking Your Present Location as a Waypoint.................... 10

Creating a Waypoint at a Different Location........................ 10

Marking and Starting Navigation to an MOB Location......... 10

Viewing a List of all Waypoints............................................ 11

Editing a Saved Waypoint.................................................... 11

Moving a Saved Waypoint................................................... 11

Browsing for and Navigating to a Saved Waypoint.............. 11

Deleting a Waypoint or an MOB.......................................... 11

Deleting All Waypoints......................................................... 11

Setting and Following a Direct Course Using Go To........... 11

Routes...................................................................................... 11

Creating and Navigating a Route From Your Present

Location............................................................................... 11

Creating and Saving a Route............................................... 11

Viewing a List of Routes and Auto Guidance Paths............ 12

Editing a Saved Route......................................................... 12

Browsing for and Navigating a Saved Route....................... 12

Browsing for and Navigating Parallel to a Saved Route...... 12

Deleting a Saved Route....................................................... 12

Deleting All Saved Routes................................................... 12

Auto Guidance.......................................................................... 12

Setting and Following an Auto Guidance Path.................... 12

Creating and Saving an Auto Guidance Path...................... 12

Adjusting an Auto Guidance Path........................................ 13

Canceling an Auto Guidance Calculation in Progress......... 13

Setting a Timed Arrival.........................................................13

Auto Guidance Path Configurations.................................... 13

Tracks....................................................................................... 13

Showing Tracks................................................................... 13

Setting the Color of the Active Track................................... 13

Saving the Active Track....................................................... 14

Viewing a List of Saved Tracks............................................ 14

Editing a Saved Track.......................................................... 14

Saving a Track as a Route...................................................14

Browsing for and Navigating a Recorded Track.................. 14

Deleting a Saved Track........................................................14

Deleting All Saved Tracks.................................................... 14

Retracing the Active Track................................................... 14

Clearing the Active Track..................................................... 14

Managing the Track Log Memory During Recording........... 14

Configuring the Recording Interval of the Track Log........... 14

Boundaries................................................................................14

Creating a Boundary............................................................ 14

Converting a Route to a Boundary...................................... 14

Converting a Track to a Boundary....................................... 14

Editing a Boundary...............................................................14

Setting a Boundary Alarm.................................................... 15

Deleting a Boundary............................................................ 15

Stopping Navigation................................................................. 15

Synchronizing User Data Across the Garmin Marine

Network.....................................................................................15

Deleting All Saved Waypoints, Routes, and Tracks................. 15

Table of Contents i

Combinations............................................................... 15

Selecting a Combination........................................................... 15

Customizing a Combination Screen......................................... 15

Adding a Custom Combination Screen.................................... 15

Sonar............................................................................. 15

Sonar Views..............................................................................15

Traditional Sonar View......................................................... 15

DownVü Sonar View............................................................ 16

SideVü Sonar View.............................................................. 16

Split-Zoom Sonar View........................................................ 16

Split-Frequency Sonar View................................................ 16

Panoptix Sonar Views.......................................................... 16

Changing the Sonar View.................................................... 17

Selecting the Transducer Type................................................. 17

Creating a Waypoint on the Sonar Screen Using the

Touchscreen............................................................................. 17

Creating a Waypoint on the Sonar Screen Using the Device

Keys.......................................................................................... 17

Measuring Distance on the Sonar Screen................................ 17

Pausing the Sonar Display....................................................... 17

Viewing Sonar History.............................................................. 17

Sonar Sharing........................................................................... 18

Selecting a Sonar Source.................................................... 18

Renaming a Sonar Source...................................................18

Customizing the Overlay Numbers........................................... 18

Adjusting the Level of Detail..................................................... 18

Adjusting the Color Intensity..................................................... 18

Adjusting the Range of the Depth or Width Scale.................... 18

Setting the Zoom Level on the Sonar Screen........................... 18

Setting the Scroll Speed........................................................... 19

Sonar Frequencies................................................................... 19

Selecting Frequencies......................................................... 19

Creating a Frequency Preset............................................... 19

Customizing the Panoptix Sonar Views.................................... 19

Calibrating the Compass......................................................19

Adjusting the Appearance of the LiveVü Sonar Views........ 19

Setting the LiveVü Transducer Transmit Angle................... 19

Adjusting the RealVü Viewing Angle and Zoom Level......... 19

Adjusting the Appearance of the RealVü Sonar Views........ 20

Adjusting the RealVü Sweep Speed.................................... 20

Turning On the A-Scope........................................................... 20

Sonar Setup.............................................................................. 20

Sonar Settings..................................................................... 20

RealVü Sonar Settings.........................................................20

LiveVü Sonar Settings......................................................... 20

Sonar Appearance Settings................................................. 20

Advanced Sonar Settings.................................................... 20

Sonar Alarm Settings........................................................... 21

Transducer Installation Settings...........................................21

Sonar Recordings..................................................................... 21

Recording the Sonar Display............................................... 21

Stopping the Sonar Recording............................................. 21

Deleting a Sonar Recording................................................. 21

Playing Sonar Recordings................................................... 21

Depth and Water Temperature Graphs.................................... 21

Setting the Depth and Water Temperature Graph Range and

Time Scales......................................................................... 21

Radar............................................................................. 21

Radar Display Modes............................................................... 22

Transmitting Radar Signals...................................................... 22

Adjusting the Radar Range...................................................... 22

Tips for Selecting a Radar Range........................................ 22

Adjusting the Zoom Scale on the Radar Screen...................... 22

Marking a Waypoint on the Radar Screen................................ 22

Sentry Mode............................................................................. 22

Enabling Timed Transmit..................................................... 22

Setting the Standby and Transmit Times............................. 22

Enabling a Guard Zone........................................................ 22

Defining a Circular Guard Zone........................................... 22

Defining a Partial Guard Zone............................................. 23

Viewing a List of AIS Threats............................................... 23

Showing AIS Vessels on the Radar Screen........................ 23

VRM and EBL........................................................................... 23

Showing the VRM and the EBL........................................... 23

Adjusting the VRM and the EBL.......................................... 23

Measuring the Range and Bearing to a Target Object........ 23

Radar Overlay...........................................................................23

Radar Overlay and Chart Data Alignment........................... 23

Showing the Radar Overlay................................................. 23

Setting a Custom Park Position................................................ 23

Enabling and Adjusting a Radar No Transmit Zone................. 24

Stopping the Transmission of Radar Signals........................... 24

Optimizing the Radar Display................................................... 24

Radar Gain and Clutter........................................................ 24

Echo Trails........................................................................... 25

Radar Display Settings........................................................ 25

Radar Appearance Settings................................................. 25

Front-of-Boat Offset............................................................. 25

Gauges and Almanac Information.............................. 25

Viewing the Compass............................................................... 26

Viewing Trip Gauges................................................................ 26

Resetting Trip Gauges......................................................... 26

Viewing Engine and Fuel Gauges............................................ 26

Customizing Engine Gauge and Fuel Gauge Limits............ 26

Enabling Status Alarms for Engine Gauges........................ 26

Enabling Some Engine Gauge Status Alarms..................... 26

Selecting the Number of Engines Shown in Gauges........... 26

Customizing the Engines Shown in Gauges........................ 26

Configuring the Fuel Gauges Display.................................. 26

Setting the Fuel Capacity of the Vessel............................... 26

Synchronizing the Fuel Data with the Actual Vessel Fuel... 26

Setting the Fuel Alarm......................................................... 26

Viewing the Wind Gauges........................................................ 26

Configuring the Sailing Wind Gauge.................................... 27

Configuring the Speed Source............................................. 27

Configuring the Heading Source of the Wind Gauge........... 27

Customizing the Close-Hauled Wind Gauge....................... 27

Viewing the Environment Gauges............................................ 27

Configuring the Alignment of the Wind Gauge.................... 27

Configuring the Heading Source of the Environment

Gauge.................................................................................. 27

Setting the Barometer Reference Time............................... 27

Tide, Current, and Celestial Information................................... 27

Tide Station Information....................................................... 27

Current Station Information.................................................. 27

Celestial Information............................................................ 27

Viewing Tide Station, Current Station, or Celestial Information

for a Different Date...............................................................27

Viewing Information for a Different Tide or Current

Station.................................................................................. 27

Viewing Almanac Information from the Navigation Chart.... 27

Digital Selective Calling............................................... 28

Networked Chartplotter and VHF Radio Functionality.............. 28

Turning On DSC....................................................................... 28

DSC List....................................................................................28

Viewing the DSC List........................................................... 28

Adding a DSC Contact......................................................... 28

Incoming Distress Calls............................................................ 28

Navigating to a Vessel in Distress....................................... 28

Man-Overboard Distress Calls Initiated from a VHF

Radio....................................................................................28

ii Table of Contents

Man-Overboard and SOS Distress Calls Initiated from the

Chartplotter.......................................................................... 28

Position Tracking...................................................................... 28

Viewing a Position Report.................................................... 28

Navigating to a Tracked Vessel........................................... 28

Creating a Waypoint at the Position of a Tracked Vessel.... 28

Editing Information in a Position Report.............................. 28

Deleting a Position-Report Call............................................ 29

Viewing Vessel Trails on the Chart...................................... 29

Individual Routine Calls............................................................ 29

Selecting a DSC Channel.................................................... 29

Making an Individual Routine Call....................................... 29

Making an Individual Routine Call to an AIS Target............ 29

Media Player................................................................. 29

Opening the Media Player........................................................ 29

Icons.................................................................................... 29

Selecting the Media Source...................................................... 29

Connecting a Bluetooth Wireless Device to the Media

Player................................................................................... 29

Playing Music............................................................................29

Browsing for Music...............................................................29

Setting a Song to Repeat..................................................... 30

Setting All Songs to Repeat................................................. 30

Setting Songs to Shuffle...................................................... 30

Listening to the Radio.......................................................... 30

Opening the MTP Source.................................................... 30

Adjusting the Volume................................................................ 30

Enabling and Disabling Zones............................................. 30

Muting the Media Volume.................................................... 30

Scanning VHF Channels.......................................................... 30

Adjusting the VHF Squelch....................................................... 30

Setting the Device Name.......................................................... 30

SiriusXM® Satellite Radio........................................................ 30

Locating a SiriusXM Radio ID.............................................. 30

Activating a SiriusXM Subscription...................................... 30

Customizing the Channel Guide.......................................... 30

Saving a SiriusXM Channel to the Presets List................... 30

Unlocking SiriusXM Parental Controls................................. 31

Viewing Video............................................................... 31

Configuring the Video Appearance........................................... 31

SiriusXM Weather......................................................... 31

SiriusXM Equipment and Subscription Requirements.............. 31

Weather Data Broadcasts.........................................................31

Viewing Precipitation Information............................................. 31

Precipitation Views...............................................................32

Storm Cell and Lightning Information....................................... 32

Hurricane Information............................................................... 32

Weather Warnings and Weather Bulletins................................ 32

Forecast Information................................................................. 32

Viewing Forecast Information for Another Time Period....... 32

Viewing a Marine Forecast or an Offshore Forecast........... 32

Weather Fronts and Pressure Centers................................ 32

City Forecasts...................................................................... 32

Viewing Sea Conditions............................................................ 32

Surface Winds......................................................................32

Wave Height, Wave Period, and Wave Direction................ 33

Viewing Forecast Sea Conditions Information for Another

Time Period

Viewing Fishing Information......................................................33

Surface Pressure and Water Temperature Data................. 33

Forecasting Fish Locations.................................................. 33

Changing the Sea Surface Temperature Color Range........ 33

Visibility Information.................................................................. 33

Viewing Forecast Visibility Information for Another Time

Period...................................................................................33

..........................................................................33

Viewing Buoy Reports.............................................................. 33

Viewing Local Weather Information near a Buoy................. 33

Creating a Waypoint on a Weather Chart................................. 33

Weather Overlay....................................................................... 33

Turning On the Weather Overlay on a Chart....................... 34

Weather Overlay Settings on the Navigation Chart............. 34

Weather Overlay Settings on the Fishing Chart.................. 34

Viewing Weather Subscription Information............................... 34

Device Configuration................................................... 34

Turning On the Chartplotter Automatically............................... 34

System Settings........................................................................ 34

Display Settings................................................................... 34

GPS Settings....................................................................... 34

Viewing the Event Log......................................................... 34

Viewing System Software Information................................. 34

My Vessel Settings................................................................... 34

Setting the Keel Offset......................................................... 35

Calibrating a Water Speed Device....................................... 35

Setting the Water Temperature Offset................................. 35

Communications Settings......................................................... 35

NMEA 0183..........................................................................35

NMEA 2000 Settings............................................................36

Setting Alarms.......................................................................... 36

Navigation Alarms................................................................ 36

System Alarms..................................................................... 36

Setting the Fuel Alarm......................................................... 36

Setting Weather Alarms....................................................... 36

Units Settings............................................................................36

Navigation Settings................................................................... 36

Auto Guidance Path Configurations.................................... 36

Adjusting the Distance from Shore...................................... 37

Other Vessel Settings............................................................... 37

Restoring the Original Chartplotter Factory Settings................ 37

Chartplotter Data Management................................... 37

Copying Waypoints, Routes, and Tracks from HomePort to a

Chartplotter............................................................................... 37

Selecting a File Type for Third-Party Waypoints and Routes... 37

Copying Data from a Memory Card.......................................... 37

Copying Waypoints, Routes, and Tracks to a Memory Card.... 38

Copying Built-In Maps to a Memory Card................................. 38

Backing Up Data to a Computer............................................... 38

Restoring Backup Data to a Chartplotter.................................. 38

Saving System Information to a Memory Card......................... 38

Appendix....................................................................... 38

Registering Your Device........................................................... 38

Cleaning the Screen................................................................. 38

Calibrating the Touchscreen..................................................... 38

Screenshots.............................................................................. 38

Capturing Screenshots........................................................ 38

Copying Screenshots to a Computer................................... 38

Troubleshooting........................................................................ 38

My device will not acquire GPS signals............................... 38

My device will not turn on or keeps turning off..................... 38

My device is not creating waypoints in the correct

location.................................................................................39

The touchscreen is not responding to my touches.............. 39

NMEA 0183 Information........................................................... 39

NMEA 2000 PGN Information...................................................39

Software License Agreement................................................... 40

Index.............................................................................. 41

Table of Contents iii

Introduction

WARNING

See the product box for product warnings and other important information.

echoMAP 70 Series and GPSMAP 700 Series

À Á Â Ã

Using the Touchscreen

• Tap the screen to select an item.

• Drag or swipe your finger across the screen to pan or scroll.

• Pinch two fingers together to zoom out.

• Spread two fingers apart to zoom in.

Locking the Touchscreen

You can lock the touchscreen to prevent inadvertent screen touches.

1 2

echoMAP

Important Safety and Product Information guide in the

Power key

Automatic backlight sensor

Touchscreen

microSD™ memory card slots

Select .

Select Lock Touchscreen

50 Series and GPSMAP 500 Series

Zooms in to a chart or view.

SELECT Acknowledges messages and selects options.

BACK Returns to the previous screen.

MARK Saves the present location as a waypoint.

HOME Returns to the Home screen.

MENU Opens a menu of options for the page, when applicable.

Scrolls, highlights options, and moves the cursor.

Closes a menu, when applicable.

Downloading the Manuals

You can get the latest owner's manual and translations of manuals from the web.

Go to www.garmin.com/support.

Select Manuals.

Follow the on-screen instructions to download the manual for

your product.

Manual Conventions

In this manual, the term “select” is used to describe these actions.

• Touching an item on the screen (for touchscreen devices

only).

• Using the arrow keys to highlight a menu item, and then

pressing SELECT (for hard key devices only).

• Pressing a key, such as SELECT or MENU. When you are instructed to select multiple items in a series,

small arrows appear in the text. For example, "select Menu > Add," indicates that you need to select the Menu item or hard key and then select the Add item.

The images in this manual are for reference only and may not match your device exactly.

Getting More Information

If you have any questions about your device, you can contact Garmin® Product Support.

The website, www.garmin.com/support, offers many different troubleshooting tips to help resolve most issues and answer most questions.

• Frequently-asked questions (FAQs)

• Software updates

• Owner's and installation manuals

• Service alerts

• Video

• Contact numbers and addresses

Inserting Memory Cards

You can use optional memory cards in the chartplotter. Map cards allow you to view high-resolution satellite imagery and aerial reference photos of ports, harbors, marinas, and other points of interest. You can use blank memory cards to record

Automatic backlight sensor

Power key

Device keys

microSD

memory card slots

Device Keys

Turns on and off the device when held.

Adjusts the backlight and color mode when quickly pressed and released.

Zooms out of a chart or view.

Introduction 1

sonar data and transfer data such as waypoints, routes, and tracks to another compatible Garmin chartplotter or a computer.

Open the access flap or door on the front of the chartplotter.

Insert the memory card.

Press the card in until it clicks.

Close the door.

Software Update

You may need to update the device software when you install the device or add an accessory to the device.

Loading the New Software on a Memory Card

You must copy the software update to a memory card using a computer that is running Windows® software.

NOTE: You can contact Garmin customer support to order a preloaded software update card if you do not have a computer with Windows software.

Insert a memory card into the card slot on the computer.

Go to www.garmin.com/support/software/marine.html.

Select Download next to the software bundle that

corresponds with your device. Read and agree to the terms.

Select Download.

If necessary, select Run.

If necessary, select the drive associated with the memory

card, and select Next > Finish.

Loading the New Software on a Memory Card

Insert a memory card into the card slot on the computer.

Go to www.garmin.com/support/software/marine.html.

Select Download next to echoMAP Series with SD Card.

Read and agree to the terms.

Select Download.

Select Run.

Select the drive associated with the memory card, and select

Next > Finish.

Updating the Device Software

Before you can update the software, you must obtain a software-update memory card or load the latest software onto a memory card.

Turn on the chartplotter.

After the home screen appears, insert the memory card into

the card slot. NOTE: In order for the software update instructions to

appear, the device must be fully booted before the card is inserted.

Follow the on-screen instructions.

Wait several minutes while the software update process

completes. When prompted, leave the memory card in place and restart

the chartplotter manually. Remove the memory card.

NOTE: If the memory card is removed before the device

restarts fully, the software update is not complete.

GPS Satellite Signals

When you turn on the chartplotter, the GPS receiver must collect satellite data and establish the current location. When the

chartplotter acquires satellite signals, appears at the top of the Home screen. When the chartplotter loses satellite signals,

disappears and a flashing question mark appears over on

the chart. For more information about GPS, go to www.garmin.com

/aboutGPS

Selecting the GPS Source

You can select your preferred source for GPS data, if you have more than one GPS source.

Select Settings > System >

Select the source for GPS data.

GPS > Source

Customizing the Chartplotter

Customizing the Home Screen

You can add items to and rearrange items on the Home screen.

From the Home screen, select Customize Home.

Select an option:

• To rearrange an item, select move, and select the new location.

• To add an item to the Home screen, select select the new item.

• To remove an item you have added to the Home screen, select Remove

, and select the item.

Rearrange, select the item to

Add, and

Setting the Vessel Type

You can select your boat type to configure the chartplotter settings and to use features customized for your boat type.

Select Settings > My Vessel > Vessel Type.

Select an option.

Adjusting the Backlight

Select Settings > System >

TIP:

Press

Select an option:

• Adjust the backlight level.

• Select

from any screen to open the backlight settings.

Auto Backlight.

Display > Backlight

Adjusting the Color Mode

Select Settings > System >

TIP: Press from any screen to access the color settings.

Select an option.

Display > Color Mode

Hiding and Showing the Menu Bar

NOTE: This feature is not available on all chartplotter models.

You can hide the menu bar automatically to make more screen space available.

Select Settings > System > Display > Menu Bar Display >

Auto Hide.

After a short period of time on a main page, such as a chart, the menu bar collapses down.

Swipe the screen from the bottom up to show the menu bar

again.

Communication with Wireless Devices

The chartplotters can create a wireless network to which you can connect wireless devices.

Some models also can connect to Bluetooth using the AVRCP profile.

wireless devices

2 Customizing the Chartplotter

Connecting wireless devices allows you to use Garmin including BlueChart

www.garmin.com for more information.

Mobile and Garmin Helm™. See

apps,

Setting Up the Wi‑Fi® Wireless Network

The chartplotters can create a Wi‑Fi connect wireless devices. The first time you access the wireless network settings, you are prompted to set up the network.

Select Settings

Wi-Fi® Network > Wi-Fi® > On > OK

If necessary, enter a name for this wireless network.

Enter a password.

You will need this password to access the wireless network from a wireless device. The password is case-sensitive.

> Communications > Wireless Devices >

network to which you can

Connecting a Wireless Device to the Chartplotter

Before you can connect a wireless device to the chartplotter wireless network, you must configure the chartplotter wireless network (

You can connect multiple wireless devices to the chartplotter to share data.

Setting Up the Wi

From the wireless device, turn on the Wi‑Fi technology and search for wireless networks.

Select the name of your chartplotter wireless network (Setting

Up the

Enter the network password.

Wireless Network, page 3).

Wi‑Fi

Wireless Network, page 3).

‑

Changing the Wireless Channel

You can change the wireless channel if you have trouble finding or connecting to a device, or if you experience interference.

Select Settings > Communications > Wireless Devices >

Wi-Fi® Network > Advanced

Enter a new channel.

You do not need to change the wireless channel of devices connected to this network.

> Wi-Fi® Channel

Using the Garmin Helm App with the Chartplotter

Before you can control the chartplotter with the Garmin Helm app, you must download and install the application, and connect the chartplotter to a mobile device (

Device to the Chartplotter

Select Settings > Communications

Helm App

Select an option.

Use the application to view or control the chartplotter.

, page

Connecting a Wireless

3).

> Wireless Devices >

Connecting a Bluetooth Wireless Device

NOTE: Bluetooth

models. You can wirelessly connect the chartplotter to a Bluetooth

device.

Place the

chartplotter. Select Settings > Communications >

Bluetooth Devices > Bluetooth

If necessary, enter a name for this wireless network.

If necessary, enter a password.

You will need this password to access the wireless network from a wireless device. The password is case-sensitive.

technology is not available on all chartplotter

Bluetooth device within 33 ft. (10 m) of the

Wireless Devices >

Disconnecting a Bluetooth Wireless Device

Select Settings > Communications

Bluetooth Devices > Device List

Select a device.

Select

Forget Device.

> Wireless Devices >

Charts and 3D Chart Views

The charts and 3D chart views that are available depend on the map data and accessories used.

You can access the charts and 3D chart views by selecting Charts.

Navigation Chart

loaded maps and from supplemental maps, if available. The data includes buoys, lights, cables, depth soundings, marinas, and tide stations in an overhead view.

Perspective 3D: Provides a view from above and behind the

boat (according to your course) and provides a visual navigation aid. This view is helpful when navigating tricky shoals, reefs, bridges, or channels, and is beneficial when trying to identify entry and exit routes in unfamiliar harbors or anchorages.

Mariner’s Eye 3D: Shows a detailed, three-dimensional view

from above and behind the boat (according to your course) and provides a visual navigation aid. This view is helpful when navigating tricky shoals, reefs, bridges, or channels, and when trying to identify entry and exit routes in unfamiliar harbors or anchorages.

NOTE: Mariner's Eye 3D and Fish Eye 3D chart views are available with premium charts, in some areas.

Fish Eye 3D

represents the sea floor according to the chart information. When a sonar transducer is connected, suspended targets (such as fish) are indicated by red, green, and yellow spheres. Red indicates the largest targets and green indicates the smallest.

Fishing Chart

and depth soundings on the chart. This chart removes navigational data from the chart, provides detailed bathymetric data, and enhances bottom contours for depth recognition. This chart is best for offshore deep-sea fishing.

NOTE: The offshore Fishing chart is available with premium charts, in some areas.

Radar Overlay: Superimposes radar information on the

Navigation chart or the Fishing chart, when the chartplotter is connected to a radar. This feature is not available with all models.

Navigation Chart and Offshore Fishing Chart

NOTE:

charts, in some areas. The Navigation and Fishing charts allow you to plan your

course, view map information, and follow a route. The Fishing chart is for offshore fishing.

To open the Navigation chart, select

Chart

The offshore Fishing chart is available with premium

: Shows navigation data available on your pre-

: Provides an underwater view that visually

: Provides a detailed view of the bottom contours

Charts >

Navigation

To open the Fishing chart, select Charts

Charts and 3D Chart Views 3

> Fishing Chart

Zooming In and Out of the Chart

The zoom level is indicated by the scale number at the bottom of the chart. The bar under the scale number represents that distance on the chart.

• Select to zoom out.

• Select to zoom in.

Panning the Chart

You can move the chart to view an area other than your present location.

From the chart, drag the navigation screen or use the arrow

keys. Select Stop Panning or

screen to your present location.

Back to stop panning and return the

Selecting an Item on the Map Using the Device Keys

From a chart or 3D chart view, select , , , or to move

the cursor. Select

SELECT.

Measuring a Distance on the Chart

From a chart or the Radar overlay, select a location.

Select

TIP: To reset the pin and measure from the current location of

the cursor, select

Measure Distance.

A push pin appears on the screen at your present location. The distance and angle from the pin is listed in the corner.

Select.

Chart Symbols

This table contains some of the common symbols you might see on the detailed charts.

Icon Description

Buoy

Information

Marine services

Tide station

Current station

Overhead photo available

Perspective photo available

Other features common to most charts include depth contour lines, intertidal zones, spot soundings (as depicted on the original paper chart), navigational aids and symbols, obstructions, and cable areas.

Navigating to a Point on the Chart

CAUTION

The Auto Guidance feature is based on electronic chart information. That data does not ensure obstacle and bottom clearance. Carefully compare the course to all visual sightings, and avoid any land, shallow water, or other obstacles that may be in your path.

When using Go To, a direct course and a corrected course may pass over land or shallow water. Use visual sightings, and steer to avoid land, shallow water, and other dangerous objects.

NOTE: The offshore Fishing chart is available with premium charts, in some areas.

NOTE:

areas.

1 2 3

Auto Guidance is available with premium charts, in some

From the Navigation chart or Fishing chart, select a location.

If necessary, select

Navigate To.

Select

SELECT.

Select an option:

• To navigate directly to the location, select Go To.

• To create a route to the location, including turns, select Route To.

• To use Auto Guidance, select

Review the course indicated by the magenta line.

NOTE:

any part of the magenta line indicates that Auto Guidance cannot calculate part of the Auto Guidance line. This is due to the settings for minimum safe water depth and minimum safe obstacle height.

Follow the magenta line, steering to avoid land, shallow

water, and other obstacles.

When using Auto Guidance, a gray segment within

Auto Guidance.

Viewing Location and Object Information on a Chart

You can view information about a location or an object on the Navigation chart or the Fishing chart.

NOTE:

charts, in some areas.

The offshore Fishing chart is available with premium

From the Navigation chart or Fishing chart, select a location or object.

A list of options appears along the right side of the chart. The options that appear vary based on the location or object you selected.

Select an option:

• To navigate to the selected location, select Navigate To.

• To mark a waypoint at the cursor location, select New Waypoint.

• To view the distance and bearing of the object from your current location, select

The distance and bearing appear on the screen. Select Select to measure from a location other than your current location.

• To view tide, current, celestial, chart notes, or local services information near the cursor, select Information

Measure Distance.

Viewing Details about Navaids

From the Navigation chart, Fishing chart, Perspective 3D chart view, or Mariner’s Eye 3D chart view, you can view details about various types of navigation aids, including beacons, lights, and obstructions.

NOTE:

charts, in some areas.

NOTE:

available with premium charts, in some areas.

1 2

The offshore Fishing chart is available with premium

Mariner's Eye 3D and Fish Eye 3D chart views are

From a chart or 3D chart view, select a navaid.

Select the name of the navaid.

Selecting a Map

If your product has both BlueChart g2 and built-in maps, you can select which map to use. Not all models have both types of built-in maps.

From the Navigation chart, select Menu

Select an option:

• When you are on an inland lake, select LakeVü™ HD.

• When you are offshore, select BlueChart® g2.

Garmin LakeVü

> Built-in Map

™

Heading Line and Angle Markers

The heading line is an extension drawn on the map from the bow of the boat in the direction of travel. Angle markers indicate relative position from the heading or course over ground, which are helpful for casting or finding reference points.

Setting the Heading and Course Over Ground Lines

You can show the heading line and the course over ground (COG) line on the chart.

4 Charts and 3D Chart Views

COG is your direction of movement. Heading is the direction the bow of the boat is pointed, when a heading sensor is connected.

From a chart view, select Menu > Chart Setup > Chart

Appearance > Heading Line.

If necessary, select

• To automatically use the source available, select Auto.

• To use the GPS antenna heading for COG, select GPS Heading (COG).

• To use data from a connected heading sensor, select Heading.

• To use data from both a connected heading sensor and the GPS antenna, select COG and Heading.

This displays both the heading line and the COG line on the chart.

Select Display

• Select Distance > line shown on the chart.

• Select Time the distance your boat will travel in the specified time at your present speed.

Turning on Angle Markers

You can add angle markers to the map along the heading line. Angle markers can be helpful for casting when fishing.

Set the heading line (Setting the Heading and Course Over

Ground Lines, page 4)

Select

Angle Markers.

Source, and select an option:

, and select an option:

, and enter the length of the

> Time

Distance

, and enter the time used to calculate

Premium Charts

CAUTION

NOTE:

Optional premium charts, such as BlueChart g2 Vision you to get the most out of your chartplotter. In addition to detailed marine charting, premium charts may contain these features, which are available in some areas.

Mariner’s Eye 3D: Provides a view from above and behind the

Fish Eye 3D

Fishing Charts: Shows the chart with enhanced bottom

High Resolution Satellite Imagery: Provides high-resolution

Aerial Photos

Detailed Roads and POI data: Shows detailed road and point

Auto Guidance: Uses specified information about your vessel

Not all models support all charts.

boat for a three-dimensional navigation aid.

: Provides an underwater, three-dimensional view that visually represents the sea floor according to the information on the chart.

contours and without navigational data. This chart works well for offshore deep-sea fishing.

satellite images for a realistic view of the land and water on the Navigation chart (Showing Satellite Imagery on the

Navigation Chart, page 5)

: Shows marinas and other navigationally significant aerial photos to help you visualize your surroundings (

page 6).

of interest (POI) data, which includes highly detailed coastal roads and POIs such as restaurants, lodging, and local attractions.

and chart data to determine the best path to your destination.

Viewing Aerial Photos of Landmarks,

, allow

Viewing Tide Station Information

on the chart indicates a tide station. You can view a detailed graph for a tide station to help predict the tide level at different times or on different days.

NOTE:

areas.

Animated Tide and Current Indicators

NOTE:

areas. You can view indicators for animated tide station and current

direction on the Navigation chart or the Fishing chart. You must also enable animated icons in the chart settings (

and Current Indicators,

An indicator for a tide station appears on the chart as a vertical bar graph with an arrow. A red arrow pointing downward indicates a falling tide, and a blue arrow pointing upward indicates a rising tide. When you move the cursor over the tide station indicator, the height of the tide at the station appears above the station indicator.

Current direction indicators appear as arrows on the chart. The direction of each arrow indicates the direction of the current at a specific location on the chart. The color of the current arrow indicates the range of speed for the current at that location. When you move the cursor over the current direction indicator, the specific current speed at the location appears above the direction indicator.

Showing Tides and Current Indicators

NOTE:

areas. You can show static or animated tide and current station

indicators on the Navigation chart or Fishing chart.

This feature is available with premium charts, in some

From the Navigation chart or Fishing chart, select a tide station.

Tide direction and tide level information appear near . Select the station name.

This feature is available with premium charts, in some

Showing Tides

5).

page

Color Current Speed Range

Yellow 0 to 1 knot

Orange 1 to 2 knots

Red 2 or more knots

This feature is available with premium charts, in some

From the Navigation or Fishing chart, select Menu > Chart

Setup

> Tides & Currents

Select an option:

• To show current station indicators and tide station

indicators on the chart, select On

• To show animated tide station indicators and animated

current direction indicators on the chart, select Animated

Showing Satellite Imagery on the Navigation Chart

NOTE:

areas. You can overlay high-resolution satellite images on the land or

on both land and sea portions of the Navigation chart.

NOTE:

present only at lower zoom levels. If you cannot see highresolution images in your optional chart region, you can select to zoom in. You also can set the detail level higher by changing the map zoom detail.

This feature is available with premium charts, in some

When enabled, high-resolution satellite images are

From the Navigation chart, select Menu > Chart Setup > Satellite Photos.

Select an option:

• Select

Land Only to show standard chart information on

the water, with photos overlaying the land.

Charts and 3D Chart Views 5

• Select

Photo Map Blend to show photos on both the

water and the land at a specified opacity. Use the slider bar to adjust the photo opacity. The higher you set the percentage, the more the satellite photos cover both land and water.

Viewing Aerial Photos of Landmarks

Before you can view aerial photos on the Navigation chart, you must turn on the

Satellite Photos setting in the chart setup.

NOTE: This feature is available with premium charts, in some areas.

You can use aerial photographs of landmarks, marinas, and harbors to help orient yourself to your surroundings or to acquaint yourself with a marina or a harbor prior to arrival.

From the Navigation chart, select a camera icon:

• To view an overhead photo, select .

• To view a perspective photo, select . The photo was taken from the location of the camera, pointed in the direction of the cone.

Select

Aerial Photo.

Garmin Quickdraw™ Contours Mapping

Garmin Quickdraw Contours mapping feature allows you to

The instantly create maps with contours and depth labels for any body of water.

When Garmin Quickdraw Contours records data, a colored circle surrounds the vessel icon. This circle represents the approximate area of the map that is scanned by each pass. A green circle indicates good depth and a good GPS position. A red circle indicates that the depth or GPS position data is unavailable.

You can view Garmin Quickdraw Contours in a combination screen or as a single view on the map.

The amount of saved data depends on the size of your memory card, your sonar source, and the speed of your boat as you record data. You can record longer when you use a single-beam sonar. It is estimated that you might be able to record about 1,500 hours of data onto a 2 GB memory card.

When you record data on a memory card in your chartplotter, the new data is added to your existing Garmin Quickdraw Contours map, and is saved on the memory card. When you insert a new memory card, the existing data does not transfer onto the new card.

Mapping a Body of Water Using the Garmin Quickdraw Contours Feature

Before you can use the Garmin Quickdraw you must have a supported chartplotter with upgraded software, sonar depth, your GPS position, and a memory card with free space.

NOTE:

This feature is not available on all models.

From a chart view, select Menu > Quickdraw Contours > Start Recording.

When recording is complete, select Stop Recording.

Select Manage

> Name

, and enter a name for the map.

Adding a Label to a Garmin Quickdraw

You can add labels to a Garmin Quickdraw Contours map to mark hazards or points of interest.

From the Navigation chart, select a location.

Select

2 3

Add Quickdraw Label.

Enter text for the label, and select Done

Garmin Quickdraw Contours Settings

From the chart, select Menu Settings

> Quickdraw Contours >

Contours feature,

Contours Map

Recording Offset: Sets the distance between the sonar depth

and the contour recording depth. For example, a sonar depth of 3.6 m (12 ft.) with a recording offset of -0.5 m (-1.5 ft.) creates contours at a depth of 3.1 m (10.5 ft.).

Display Offset: Sets differences in contour depths and depth

labels on a Garmin Quickdraw Contours map to compensate for changes in the water level of a body of water, or for depth errors in recorded maps.

Survey Coloring: Sets the color of the Garmin Quickdraw

Contours display. When the setting is turned on, successfully recorded areas appear green, and unsuccessfully recorded areas appear red. When the setting is turned off, the contour areas use standard map colors.

Automatic Identification System

The Automatic Identification System (AIS) enables you to identify and track other vessels, and alerts you to area traffic. When connected to an external AIS device, the chartplotter can show some AIS information about other vessels that are within range, that are equipped with a transponder, and that are actively transmitting AIS information.

The information reported for each vessel includes the Maritime Mobile Service Identity (MMSI), location, GPS speed, GPS heading, time that has elapsed since the last position of the vessel was reported, nearest approach, and time to the nearest approach.

Some chartplotter models also support Blue Force Tracking. Vessels being tracked with Blue Force Tracking are indicated on the chartplotter with a blue-green color.

AIS Targeting Symbols

Symbol Description

AIS vessel. The vessel is reporting AIS information. The direction in which the triangle is pointing indicates the direction in which the AIS vessel is moving.

Target is selected.

Target is activated. The target appears larger on the chart. A green line attached to the target indicates the heading of the target. The MMSI, speed, and direction of the vessel appear beneath the target, if the details setting has been set to Show. If the AIS transmission from the vessel is lost, a message banner appears.

Target is lost. A green X indicates that the AIS transmission from the vessel is lost, and the chartplotter displays a message banner asking whether the vessel should continue to be tracked. If you discontinue vessel tracking, the lost target symbol disappears from the chart or the 3D chart view.

Dangerous target in range. The target flashes while an alarm sounds and a message banner appears. After the alarm has been acknowledged, a solid red triangle with a red line attached to it indicates the location and the heading of the target. If the safe-zone collision alarm has been set to Off, the target flashes, but the audible alarm does not sound and the alarm banner does not appear. If the AIS transmission from the vessel is lost, a message banner appears.

Dangerous target is lost. A red X indicates that the AIS transmission from the vessel is lost, and the chartplotter displays a message banner asking whether the vessel should continue to be tracked. If you discontinue vessel tracking, the lost dangerous target symbol disappears from the chart or the 3D chart view.

The location of this symbol indicates the closest point of approach to a dangerous target, and the numbers near the symbol indicate the time to the closest point of approach to that target.

NOTE:

feature are indicated with a blue-green color regardless of their status.

Vessels being tracked with the Blue Force Tracking

6 Charts and 3D Chart Views

Heading and Projected Course of Activated AIS Targets

When heading and course over ground information are provided by an activated AIS target, the heading of the target appears on a chart as a solid line attached to the AIS target symbol. A heading line does not appear on a 3D chart view.

The projected course of an activated AIS target appears as a dashed line on a chart or a 3D chart view. The length of the projected course line is based on the value of the projected heading setting. If an activated AIS target is not transmitting speed information, or if the vessel is not moving, a projected course line does not appear. Changes in the speed, course over ground, or rate of turn information transmitted by the vessel can impact the calculation of the projected course line.

When course over ground, heading, and rate of turn information are provided by an activated AIS target, the projected course of the target is calculated based on the course over ground and the rate of turn information. The direction in which the target is turning, which is also based on the rate of turn information, is indicated by the direction of the barb at the end of the heading line. The length of the barb does not change.

When course over ground and heading information are provided by an activated AIS target, but rate of turn information is not provided, the projected course of the target is calculated based on the course over ground information.

Showing AIS Vessels on a Chart or 3D Chart View

Before you can use AIS, you must connect the chartplotter to an external AIS device and receive active transponder signals from other vessels.

You can configure how other vessels appear on a chart or on a 3D chart view. The display range configured for one chart or one 3D chart view are applied only to that chart or to that 3D chart view. The details, projected heading, and trails settings configured for one chart or one 3D chart view are applied to all charts and to all 3D chart views.

From a chart or 3D chart view, select Menu > Other Vessels

> Display Setup. Select an option:

• To indicate the distance from your location in which AIS vessels appear, select Display Range, and select a distance.

• To show details about AIS-activated vessels, select Details > Show.

• To set the projected heading time for AIS-activated vessels, select Proj. Heading, and enter the time.

• To show the tracks of AIS vessels, select Trails, and select the length of the track that appears using a trail.

Activating a Target for an AIS Vessel

From a chart or a 3D chart view, select an AIS vessel.

Select AIS Vessel

Viewing Information about a Targeted AIS Vessel

You can view the AIS signal status, MMSI, GPS speed, GPS heading, and other information that is reported about a targeted AIS vessel.

From a chart or a 3D chart view, select an AIS vessel.

Select

Deactivating a Target for an AIS Vessel

1 2

AIS Vessel.

From a chart or a 3D chart view, select an AIS vessel.

Select AIS Vessel > Deactivate Target.

> Activate Target

Viewing a List of AIS Threats

From a chart or 3D chart view, select Menu > Other Vessels > AIS List.

Setting the Safe-Zone Collision Alarm

Before you can set a safe-zone collision alarm, you must have a compatible chartplotter connected to an AIS device.

The safe-zone collision alarm is used only with AIS. The safe zone is used for collision avoidance, and can be customized.

Select Settings

A message banner appears and an alarm sounds when an AIS-activated vessel enters the safe-zone area around your boat. The object is also labeled as dangerous on the screen. When the alarm is off, the message banner and audible alarm are disabled, but the object is still labeled as dangerous on the screen.

Select

2 3

4 5

Range.

Select a distance for the safe-zone radius around your vessel.

Select

Time To.

Select a time at which the alarm will sound if a target is determined to intersect the safe zone.

For example, to be notified of a pending intersection 10 minutes before it will likely occur, set Time To to 10, and the alarm will sound 10 minutes before the vessel intersects the safe zone.

> Alarms > AIS > AIS Alarm > On

AIS Distress Signals

Self-contained AIS distress signal devices transmit emergency position reports when activated. The chartplotter can receive signals from Search and Rescue Transmitters (SART), Emergency Position Indicating Radio Beacons (EPIRB), and other man overboard signals. Distress signal transmissions are different than standard AIS transmissions, so they appear differently on the chartplotter. Instead of tracking a distress signal transmission for collision avoidance, you track a distress signal transmission to locate and assist a vessel or person.

Navigating to a Distress Signal Transmission

When you receive a distress signal transmission, a distress signal alarm appears.

Select Review > Go To to begin navigation to the transmission.

AIS Distress Signal Device Targeting Symbols

Symbol Description

AIS distress signal device transmission. Select to see more information about the transmission and begin navigation.

Transmission lost.

Transmission test. Appears when a vessel initiates a test of their distress signal device, and does not represent a true emergency.

Transmission test lost.

Enabling AIS Transmission Test Alerts

To avoid a large number of test alerts and symbols in crowded areas such as marinas, you can select to receive or ignore AIS test messages. To test an AIS emergency device, you must enable the chartplotter to receive test alerts.

Select Settings

Select an option:

• To receive or ignore Emergency Position Indicating Radio Beacon (EPRIB) test signals, select

• To receive or ignore Man Overboard (MOB) test signals, select

• To receive or ignore Search and Rescue Transponder (SART) test signals, select AIS-SART Test.

> Alarms > AIS

AIS-MOB Test.

AIS-EPIRB Test.

Charts and 3D Chart Views 7

Turning Off AIS Reception

AIS signal reception is turned on by default.

Select Settings All AIS functionality on all charts and 3D chart views is

disabled. This includes AIS vessel targeting and tracking, collision alarms that result from AIS vessel targeting and tracking, and the display of information about AIS vessels.

> Other Vessels > AIS > Off

Chart and 3D Chart View Settings

NOTE: Not all settings apply to all charts and 3D chart views.

Some options require premium maps or connected accessories, such as radar.

These settings apply to the charts and 3D chart views, except the radar overlay and Fish Eye 3D (Fish Eye 3D Settings,

page 9)

From a chart or a 3D chart view, select Menu.

Waypoints & Tracks: See Waypoints and Tracks Settings on

Other Vessels: See Other Vessels Settings on the Charts and

Quickdraw Contours: Turns on bottom contour drawing, and

Surface Radar: Shows surface radar details on the Perspective

Weather Radar: Shows weather radar imaging on the

Navaids: Shows navigational aids on the Fishing chart. Sailing: When in sailing mode, adjusts the laylines (Laylines

Chart Setup: See Navigation and Fishing Chart Setup,

Overlay Numbers: See Overlay Numbers Settings, page 8.

Chart Appearance: See Chart Appearance Settings, page 9.

Navigation and Fishing Chart Setup

NOTE:

Some settings require external accessories or applicable premium charts.

From the Navigation chart or Fishing chart, select

Setup. Satellite Photos: Shows high-resolution satellite images on the

Water Overlay: Enables relief shading, which shows the

Tides & Currents: Shows current station indicators and tide

Roses: Shows a compass rose around your boat, indicating

Lake Level: Sets the present water level of the lake. This

Overlay Numbers: See Overlay Numbers Settings,

the Charts and Chart Views, page 8.

Chart Views, page 9.

allows you to create fishing map labels.

3D or Mariner's Eye 3D chart views.

Perspective 3D or Mariner's Eye 3D chart views.

Settings, page 8)

page 8.

This might appear in the Chart Setup menu.

This might appear in the Chart Setup

Not all settings apply to all charts and 3D chart views.

land or on both land and sea portions of the Navigation chart, when certain premium maps are used (Showing Satellite

Imagery on the Navigation Chart, page 5)

gradient of the bottom with shading, or sonar imagery, which helps identify the density of the bottom. This feature is available only with some premium maps.

station indicators on the chart (Showing Tides and Current

Indicators, page 5)

which sets the time for which tides and currents are reported on the map.

compass direction oriented to the heading of the boat. A true wind direction or apparent wind direction indicator appears if the chartplotter is connected to a compatible marine wind sensor. When in sailing mode, true and apparent wind are shown on the wind rose.

feature is available only with some premium maps.

and starting line guidance.

menu.

Menu > Chart

and enables the tides and current slider,

page

Weather: Sets which weather items are shown on the chart,

when the chartplotter is connected to a compatible weather receiver with an active subscription. Requires a compatible, connected antenna and an active subscription.

Chart Appearance: See Chart Appearance Settings,

page

Waypoints and Tracks Settings on the Charts and Chart Views

From a chart or a 3D chart view, select Menu > Waypoints & Tracks.

Tracks: Shows tracks on the chart or 3D chart view. Waypoints: Shows the list of waypoints (Viewing a List of all

Waypoints

New Waypoint: Creates a new waypoint. Waypoint Display: Sets how to display waypoints on the chart. Active Tracks: Shows the active track options menu. Saved Tracks: Shows the list of saved tracks (Viewing a List of

Saved Tracks

Tracks Display: Sets which tracks to display on the chart based

on track color.

, page

11).

14).

Laylines Settings

To use the laylines features, you must connect a wind sensor to the chartplotter.

When in sailing mode (Setting the Vessel Type, can display laylines on the navigation chart. Laylines can be very helpful when racing.

From the navigation chart, select Menu > Sailing > Display: Sets how the laylines and vessel appear on the chart,

and sets the length of the laylines.

Sailing Angle: Allows you to select how the device calculates

laylines. The Actual measured wind angle from the wind sensor. The Manual option calculates the laylines using manually entered windward and leeward angles.

Tide Correction: Corrects the laylines based on the tide.

option calculates the laylines using the

page

2), you

Laylines

Overlay Numbers Settings

From a chart, 3D chart view, the Radar screen, or a Combinations screen, select Menu > Overlay Numbers.

Edit Layout: Sets the layout of the data overlay, or data fields.

You can select the data to be shown within each data field.

Navigation Inset: Shows the navigation inset when the vessel

is navigating to a destination.

Navigation Inset Setup: Allows you to configure the navigation

inset to show inset appears before a turn or destination.

Compass Tape: Shows the compass tape data bar when the

vessel is navigating to a destination.

Editing the Data Fields

You can change the data shown in the overlay numbers displayed on the charts and other screens.

From a screen that supports overlay numbers, select Menu.

If necessary, select Chart Setup.

Select Overlay Numbers >

Select a layout.

Select a data field.

Select the type of data shown in the field.

Available data options vary based on the chartplotter and network configuration.

Route Leg Details, and to control when the

Edit Layout

Showing a Navigation Inset

You can control whether a navigation inset appears on some chart views. The navigation inset is shown only when the boat is navigating to a destination.

8 Charts and 3D Chart Views

From a chart or 3D chart view, select

If necessary, select

Select Overlay Numbers > Navigation Inset > Auto.

Select

4 5

Navigation Inset Setup.

Complete an action:

• To show waypoint velocity made good (VMG) when

navigating a route with more than one leg, select Route Leg Details > On.

• To show next-turn data based on distance, select Next

Turn

> Distance

• To show next-turn data based on time, select Next Turn > Time.

• To indicate how the destination data appears, select

Destination, and select an option.

Chart Setup.

Menu.

Chart Appearance Settings

You can adjust the appearance of the different charts and 3D chart views. Each setting is specific to the chart or chart view being used.

NOTE: Not all settings apply to all charts and 3D chart views and chartplotter models. Some options require premium maps or connected accessories.

From a chart or 3D chart view, select Menu > Chart Setup >

Chart Appearance. Orientation: Sets the perspective of the map. Detail: Adjusts the amount of detail shown on the map, at

different zoom levels.

Heading Line: Shows and adjusts the heading line, which is a

line drawn on the map from the bow of the boat in the direction of travel, and sets the data source for the heading line.

Panoptix Area: Shows and hides the area being scanned by

the

Panoptix system (AHRS) must be calibrated use this feature (Calibrating the Compass, page 19).

World Map: Uses either a basic world map or a shaded relief

map on the chart. These differences are visible only when zoomed out too far to see the detailed charts.

Spot Depths: Turns on spot soundings and sets a dangerous

depth. Spot depths that are equal to or more shallow than the dangerous depth are indicated by red text.

Shallow Shading: Sets the shades from the shoreline to the

specified depth.

Depth Range Shading: Specifies an upper and lower depth to

shade between.

Symbols: Shows and configures the appearance of various

symbols on the chart, such as the vessel icon, navaid symbols, land POIs, and light sectors.

Style: Sets how the chart appears over 3D terrain. Hazard Colors: Shows shallow water and land with a color

scale. Blue indicates deep water, yellow is shallow water, and red is very shallow water.

Preferred Depth: Sets the appearance of a safe depth for the

Mariner’s Eye 3D chart view.

NOTE:

colors for the Mariner’s Eye 3D chart view. It does not affect the safe water depth Auto Guidance setting or the sonar shallow water alarm setting.

Range Rings: Shows and configures the appearance of range

rings, which help you to visualize distances in some chart views.

Lane Width: Specifies the width of the navigation lane, which is

the magenta line in some chart views that indicates the course to your destination.

™

transducer. The attitude and heading reference

This setting affects only the appearance of hazard

Setting the Heading and Course Over Ground Lines

You can show the heading line and the course over ground (COG) line on the chart.

COG is your direction of movement. Heading is the direction the bow of the boat is pointed, when a heading sensor is connected.

From a chart view, select Menu > Chart Setup > Chart

Appearance If necessary, select Source

• To automatically use the source available, select Auto.

• To use the GPS antenna heading for COG, select GPS Heading (COG).

• To use data from a connected heading sensor, select

Heading

• To use data from both a connected heading sensor and the GPS antenna, select

This displays both the heading line and the COG line on the chart.

Select

• Select Distance line shown on the chart.

• Select Time the distance your boat will travel in the specified time at your present speed.

> Heading Line

Display, and select an option:

> Distance

> Time

, and select an option:

COG and Heading.

, and enter the length of the

, and enter the time used to calculate

Other Vessels Settings on the Charts and Chart Views

NOTE: These options require connected accessories, such as

an AIS receiver or VHF radio. From a chart or 3D chart view, select Menu > Other Vessels. AIS List: Shows the AIS list (Viewing a List of AIS Threats,

page 7).

DSC List: Shows the DSC list (DSC List Display Setup: See AIS Display Settings, page 9. DSC Trails: Shows the tracks of DSC vessels, and selects the

length of the track that appears using a trail.

AIS Alarm: Sets the safe-zone collision alarm (Setting the Safe-

Zone Collision Alarm, page 7).

AIS Display Settings

NOTE: AIS requires the use of an external AIS device and active transponder signals from other vessels.

From a chart or 3D chart view, select Menu > Other Vessels >

Display Setup. AIS Display Range: Indicates the distance from your location

within which AIS vessels appear.

Details: Shows details about AIS-activated vessels. Proj. Heading: Sets the projected heading time for AIS-

activated vessels.

Trails: Shows the tracks of AIS vessels, and select the length of

the track that appears using a trail.

, page

28).

Fish Eye 3D Settings

NOTE:

areas. From the Fish Eye 3D chart view, select Menu.

View: Sets the perspective of the 3D chart view. Tracks: Shows tracks. Sonar Cone: Shows a cone that indicates the area covered by

Fish Symbols: Shows suspended targets.

This feature is available with premium charts, in some

the transducer.

Charts and 3D Chart Views 9

+ 35 hidden pages