Garmin eTrex Legend Owner's Manual

eTrex Legend

®

personal navigator

owner’s

manual

and

reference

guide

TM

© Copyright 2005 GARMIN Ltd. or its subsidiaries
All Rights Reserved

Garmin International, Inc.
1200 East 151st Street
Olathe, KS 66062 U.S.A.
Telephone: [phone]
FAX: [phone]

Garmin (Europe) Ltd.
Unit 5, The Quadrangle, Abbey Park
Industrial Estate
Romsey SO51 9DL, U.K.
Telephone: [phone]
FAX: [phone]

Garmin Corporation
No. 68, Jangshu 2nd Road
Shijr, Taipei County, Taiwan
Telephone: [phone]
FAX: [phone]

Except as expressly provided herein, no part of this manual may be reproduced,
copied, transmitted, disseminated, downloaded or stored in any storage medium, for
any purpose without the express prior written consent of GARMIN. GARMIN hereby
grants permission to download a single copy of this manual and of any revision to this
manual onto a hard drive or other electronic storage medium to be viewed and to print
one copy of this manual or of any revision hereto, provided that such electronic or
printed copy of this manual or revision must contain the complete text of this copyright
notice and provided further that any unauthorized commercial distribution of this
manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. GARMIN
reserves the right to change or improve its products and to make changes in the content
without obligation to notify any person or organization of such changes or improve­ments.

GARMIN®, AutoLocate®, TracBack®, and Personal Navigator® are registered
trademarks, eTrex Legend™, and MapSource™ are trademarks of GARMIN Ltd. or
its subsidiaries and may not be used without the express permission of GARMIN.

April 2005 Part Number 190-00234-00 Rev. D Printed in Taiwan

Thank you for choosing the GARMIN eTrex Legend.
To get the most from your new eTrex Legend, take time to
read through this owner’s manual in order to understand
all of the operating features. This manual is organized
into three sections.

The Introduction section provides FCC, safety, war­ranty, maintenance and product registration information
along with the Table of Contents.

The Main Pages section (listed in same order as
viewed on screen) provides details about using the
features of the eTrex Legend according to topic. The
explanations for each feature in this section are divided
into: (1) An overview that discusses the feature and how
it functions and (2) A detailed Step-by-Step instruction
for using the feature.

Introduction

Introduction

About This

Manual

The Appendices include information on items such
as Specifications, Accessories, Data Field Defini-

tions, MapSource information, a Troubleshooting
Guide and a Wiring Diagram followed by the Index.

i

Introduction

FCC Compliance

Statement

The eTrex Legend complies with Part 15 of the FCC
interference limits for Class B digital devices FOR HOME
OR OFFICE USE. These limits are designed to provide
reasonable protection against harmful interference in
a residential installation, and are more stringent than
“outdoor” requirements.

Operation of this device is subject to the following
conditions: (1) This device may not cause harmful inter­ference, and (2) this device must accept any interference
received, including interference that may cause undesired
operation.

This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a par
ticular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and
receiver.

• Connect the equipment into an outlet on a circuit
different from that to which the receiver is con
nected.

• Consult the dealer or an experienced radio/TV tech
nician for help.

-

-

-

The eTrex Legend does not contain any user-service­able parts. Repairs should only be made by an autho­rized GARMIN service center. Unauthorized repairs or
modifications could result in permanent damage to the
equipment, and void your warranty and your authority to

ii

operate this device under Part 15 regulations.

Introduction

WARNING: For use in vehicles, it is the sole
responsibility of the owner/operator of the eTrex Legend
to secure the GPS unit so that it will not interfere with the
vehicle’s operating controls, obstruct the driver’s view of
driving conditions, or cause damage or personal injury in
the event of an accident. Do not mount the eTrex Legend
over air bag panels or in the field of air bag deployment.
Air bags expand with a rapid force that can propel objects
in their path toward the driver or passengers causing pos­sible injury. Refer to air bag safety precautions contained
in the vehicle owner’s manual. Do not mount the eTrex
Legend in a place where the driver or passengers are

Do Not Place Unsecured

Do Not Mount Where

Driver’s Field of Vision

likely to impact it in an accident or collision. The mount­ing hardware provided by GARMIN is not warranted
against collision damage or the consequences thereof.

Over Air Bag Panels

WARNING:

When used in vehicles, it is the sole

Do Not Mount in Front of

responsibility of the driver of the vehicle to operate the
vehicle in a safe manner, maintain full surveillance of all
driving conditions at all times, and not become distracted
by the eTrex Legend to the exclusion of safe driving
practices. It is unsafe to operate the controls of the eTrex
Legend while you are driving. Failure by the driver of a
vehicle equipped with an eTrex Legend to pay full atten­tion to operation of the vehicle and road conditions while
the vehicle is in motion could result in an accident or
collision with property damage and personal injury.

product, its packaging,
and its components
contain chemicals known
to the State of California
to cause cancer, birth
defects, or reproductive
harm. This Notice is
being provided in accor-

CAUTION: IT IS THE USER’S RESPONSIBILITY TO
USE THIS PRODUCT PRUDENTLY. THIS PRODUCT IS
INTENDED TO BE USED ONLY AS A TRAVEL AID AND
MUST NOT BE USED FOR ANY PURPOSE REQUIRING
PRECISE MEASUREMENT OF DIRECTION, DISTANCE,
LOCATION, OR TOPOGRAPHY. THIS PRODUCT
SHOULD NOT BE USED AS AN AID TO DETERMINE
GROUND PROXIMITY FOR AIRCRAFT NAVIGATION.

dance with California’s
Proposition 65. If you
have any questions or
would like additional
information, please
refer to our web site
at http://www.garmin.
com/prop65.

Warnings

and

Precautions

on the Vehicle Dash

is Blocked

Do Not Mount

an Air Bag Field of

Deployment

WARNING: This

iii

Introduction

Warnings

and

Precautions

Software License

Agreement

CAUTION: The Global Positioning System (GPS) is
operated by the government of the United States, which is
solely responsible for its accuracy and maintenance. The
system is subject to changes which could affect the accu­racy and performance of all GPS equipment. Although
the eTrex Legend is a precision electronic NAVigation AID
(NAVAID), any NAVAID can be misused or misinter­preted and, therefore, become unsafe.

MAP DATA INFORMATION:

GARMIN is to provide customers with the most complete
and accurate cartography that is available to us at a
reasonable cost. We use a combination of governmental
and private data sources, which we identify as required
in product literature and copyright messages displayed to
the consumer. Virtually all data sources contain inaccu­rate or incomplete data to some degree. This is particu­larly true outside the United States, where complete and
accurate digital data is either not available or prohibitively
expensive.

BY USING THE ETREX LEGEND, YOU AGREE TO
BE BOUND BY THE TERMS AND CONDITIONS OF
THE FOLLOWING SOFTWARE LICENSE AGREEMENT.
PLEASE READ THIS AGREEMENT CAREFULLY.

One of the goals of

GARMIN grants you a limited license to use the soft­ware embedded in this device (the “Software”) in binary
executable form in the normal operation of the product.
Title, ownership rights and intellectual property rights in
and to the Software remain in GARMIN.

You acknowledge that the Software is the property
of GARMIN and is protected under the United States of
America copyright laws and international copyright trea­ties. You further acknowledge that the structure, organiza-

iv

tion and code of the Software are valuable trade

Introduction

secrets of GARMIN and that the Software in source code
form remains a valuable trade secret of GARMIN. You
agree not to decompile, disassemble, modify, reverse
assemble, reverse engineer or reduce to human readable
form the Software or any part thereof or create any deriva­tive works based on the Software. You agree not to export
or re-export the Software to any country in violation of
the export control laws of the United States of America.

Cleaning

The eTrex Legend is constructed of high quality
materials and does not require user maintenance other
than cleaning. Clean the unit using a cloth dampened
with a mild deteregent solution and then wipe dry. Avoid
chemical cleaners and solvents that may damage plastic
components.

Storage

Storing alkaline batteries in the unit is not recom­mended. To reduce the chance for battery leakage, remove
the batteries when storing the unit for more than six
months.

Do not store the eTrex Legend where prolonged
exposure to temperature extremes may occur (such as in
the trunk of a car) as permanent damage may result. User
information, such as waypoints, routes, etc., is retained in
the unit’s memory without the need for external power. It
is always a good practice to back up important user data
by recording it manually.

Water Immersion

The eTrex Legend is waterproof to IEC Standard 529
IPX7. The internal electronics case can withstand immer­sion in 1 meter of water for 30 minutes although water
will enter the battery compartment. Prolonged submer­sion can cause damage to the unit. After submersion, be
certain to remove the batteries and dry out the battery
compartment before reuse.

Software License

Maintenance

Agreement

v

Introduction

GARMIN

Limited Warranty

This GARMIN product is warranted to be free from defects in materials or work­manship for one year from the date of purchase. Within this period, GARMIN will at
its sole option, repair or replace any components that fail in normal use. Such repairs
or replacement will be made at no charge to the customer for parts or labor, provided
that the customer shall be responsible for any transportation cost. This warranty does
not cover failures due to abuse, misuse, accident or unauthorized alteration or repairs.

THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE
AND IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED OR STATU­TORY, INCLUDING ANY LIABILITY ARISING UNDER ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, STATUTORY OR
OTHERWISE. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, WHICH
MAY VARY FROM STATE TO STATE.

IN NO EVENT SHALL GARMIN BE LIABLE FOR ANY INCIDENTAL, SPECIAL,
INDIRECT OR CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE
USE, MISUSE, OR INABILITY TO USE THIS PRODUCT OR FROM DEFECTS IN THE
PRODUCT. Some states do not allow the exclusion of incidental or consequential dam­ages, so the above limitations may not apply to you.

GARMIN retains the exclusive right to repair or replace the unit or software or
offer a full refund of the purchase price at its sole discretion. SUCH REMEDY SHALL
BE YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY.

To obtain warranty service, contact your local GARMIN authorized dealer. Or call
GARMIN Customer Service at one of the numbers shown below, for shipping instruc­tions and an RMA tracking number. The unit should be securely packed with the
tracking number clearly written on the outside of the package. The unit should then be
sent, freight charges prepaid, to any GARMIN warranty service station. A copy of the
original sales receipt is required as the proof of purchase for warranty repairs.

vi

Introduction

GARMIN

Limited Warranty

Products sold through online auctions are not eligible for rebates or other special
offers from GARMIN. Online auction confirmations are not accepted for warranty
verification. To obtain warranty service, an original or copy of the sales receipt from the
original retailer is required. GARMIN will not replace missing components from any
package purchased through an online auction.

GARMIN International, Inc. GARMIN (Europe) Ltd.

1200 East 151st Street

Olathe, Kansas 66062, U.S.A. Romsey, SO51 9DL, U.K.

Phone: [phone] Phone: [phone]

FAX: [phone] FAX: [phone]

Product Registration

Help us to better support you by completing our on-line registration today!

Have the serial number of your eTrex Legend handy and connect to our website
(www.garmin.com). Look for the Product Registration link on the Home Page.

Serial Number

Use this area to record the external serial number (8-digit number located inside
the battery compartment) in case it is lost, stolen, or needs service. Be sure to keep
your original sales receipt in a safe place or attach a photocopy to the inside of the
manual.

Unit 4, The Quadrangle, Abbey Park Industrial Estate

Serial Number:

*

NOTE: Do not confuse this external serial number with the unit i.d.
number that is displayed in the System Setup Page. The internal serial
number is relevant to the operating software and is required only when
transferring certain types of GARMIN MapSource Data to your unit.

*

vii

Table of Contents

Introduction

About This Manual .......................................i

FCC Compliance Statement .........................ii

Warnings and Precautions ......................iii-iv

Software License Agreement ....................iv-v

Maintenance ................................................v

Warranty ................................................vi-vii

Product Registration ...................................vii

Table of Contents ......................................viii

Getting Started

Setup, and Features .....................................1

Features and Button Function ......................2

Battery Installation .......................................3

Backlighting and Contrast ............................3

The Main Pages

Main Page Basics ..........................................4

Satellite

The Main Page .............................................5

Options ....................................................6-7

Navigating

Navigating with eTrex Legend ......................8

Map

The Main Page ........................................9-10

Options ................................................11-15

Using the Pan Map Option ...................12

Stop Navigation ....................................13

Hide/Show Navigation Status ................13

Hide/Show Data Fields .........................13

Setup ....................................................14-15

The Measure Distance option ................15

Navigation

The Main Page ...........................................16

Options ................................................17-18

Trip Computer

The Main Page ...........................................19

Options ................................................20-21

Finding a Waypoint ..............................28

Finding a Favorite .................................29

Finding a City .......................................29

Finding an Exit .....................................30

Finding a Point of Interest .....................31

Finding an Address or Intersection .......32

Using a Goto .........................................34

Routes Options .....................................35-40

Creating and Using A Route ..................35

Editing a Route ................................36-38

Add/Edit from the Route Map Page ..38-39

Navigating a Route ................................39

Data Fields for the Route Page ...............40

Tracks Options .....................................41-42

Setup Options ......................................43-47

Time Page .............................................43

Units Page .............................................44

Display Page .........................................45

Heading Page ........................................45

Interface Page ........................................46

System Page ..........................................47

Accessories ...........................................48-51

Sun and Moon ......................................48

Calendar Page .......................................49

Hunt and Fish Page ...............................50

Area Calculator Page .............................51

Calculator Page .....................................51

Appendices

Appendix A: Specifications .......................52

Appendix B: Accessories ...........................53

Appendix C: Data Field Definitions .....54-55

Appendix D: MapSource Setup .................56

Appendix E: Troubleshooting ...................57

Appendix F: Wiring Diagram ....................58

Index ...................................................59-64

Main Menu

The Main Page ...........................................22

Setting the Correct Time Zone ..............22

Using the Main Menu ...........................23

Mark Options .......................................24-26

Projecting a Waypoint ...........................26

Editing Waypoints ................................26

Find Options ........................................27-34

The Find Menu .....................................27

viii

Getting Started

Before you begin to explore the eTrex Legend’s operat­ing features, you should be familiar with the information
contained in the Quick Start which includes instructions
for installing batteries, how the buttons function, starting
the eTrex Legend, adjusting the screen contrast, and basic
navigation techniques to help you start enjoying your eTrex
Legend immediately.

Five Main Pages are your primary access to operat

-

and Intersection data must be
transferred to the unit using a

GARMIN MapSource CD-ROM.

See page 56 for more informa

ing the eTrex Legend. Each page provides either a basic
navigation function or access to features which enhance
navigation or customize the unit’s operation.

This manual is arranged on the Main Pages structure
with detailed instructions on using the eTrex Legend’s
features and their options.

Augmentation System (WAAS)
is currently under development

and is not fully supported by

geo-stationary satellites, effective

use of the WAAS feature may be
limited by your geographic loca­tion in relation to those satellites

Features include:

Storage for 500 Waypoints with name and graphic
symbol.

An automatic Track Log with storage capability for
2,048 points, or 10 saved Tracks with 250 points each.

There are two WAAS satellites

in service in geo-stationary orbit

above the Equator, one over the
Atlantic Ocean and one over the

Route building capability, with storage for 20 Routes
with 50 Waypoints each.

A Trip Computer for displaying a variety of navigation
data such as speed, ETA, ETE, heading, odometer, etc.

A Find Feature for locating Waypoints, Cities,
Interstate Exits, Points of Interest, Street Addresses and
Intersections.*

8 MB of detailed map data storage, allowing transfer

Currently, WAAS satellite signal

reception requires an absolute

clear view of the sky and works

best when there are no nearby
obstructions such as buildings,

mountains, etc. In fact, you may

not be able to receive or easily
maintain a WAAS satellite signal
until full satellite support for this

from GARMIN MapSource CD-ROM’s.

Wide Area Augmentation System (WAAS) capability.**

Not enabling WAAS when you

cannot receive a signal speeds

unit map drawing and conserves

Setup

and

Features

* Points of Interest, Address,

-

tion.

** About WAAS

Because the Wide Area

now in service.

Pacific Ocean.

program is complete.

battery power.

See pages 5 and 47 for enabling

WAAS and satellite reception

techniques.

1

LEGEND

Getting Started

Features and

Button

Function

LCD

Display

Power/Data

Connector Cover

The THUMB STICK

(Five Position Switch)

• Press to enter highlighted options and to
confirm messages

• Move Up/Down or Right/Left to move
through lists, highlight fields, on-screen
buttons, icons, enter data or move the map

Internal Antenna

panning arrow

• Press and hold for two seconds to mark
your current location as a waypoint

The PAGE button:

• Press to cycle through main pages.

The POWER button:

• Press and hold to turn the unit On/Off.

• Press to toggle display backlighting On/Off.

External Power and Data Connector

with Alignment Bar

The ZOOM IN/OUT buttons:

• When on the Map Page, press to
Zoom in and out.

• When on the Satellite Page, press
to adjust the screen contrast.

• When on a list, press to jump to
the first or last item on the page,
and to page up or down.

Carry

Lanyard

Slot

2

Battery

Compartment

Cover

The FIND button:

• Press to access the Find Menu

NOTE: The eTrex Legend is designed to be
held and operated in the left hand, but it
can be held and operated using the right
hand as well to suit your preference.

Installing the lanyard

Getting Started

Installing the Batteries

The eTrex Legend operates on two “AA” batteries (not

included), which are placed into the back of the unit.

Installation and

Backlight/Contrast

Rechargeable Alkaline, NiMH, NiCad or Lithium batteries
may be used.

Stored data is not lost when

the batteries are removed.

To install batteries:

1. Remove the battery cover on
the back of the unit. Turn the
D-ring 1/4 turn counter-clock
wise & pull away clockwise.

-

Follow the battery manufactur-

2. Insert batteries
observing the
polarity.

3. Reinstall the
battery cover

‘Use With GPS Off’ mode when

by turning the

D-ring

Battery Compartment

Battery Cover

D-ring 1/4
turn.

Display Backlighting and Contrast Set Up

If lighting conditions make it hard for you to see the
display screen, you can adjust the contrast or turn on the
backlight.

To turn on the backlighting:

Press the POWER button to turn on the backlight

from any page on the unit. The backlight remains
on until the set timeout period is completed or the
POWER button is pressed again.

The unit is factory set to timeout 15 seconds after

the last button press. (To reset the backlight time

-

out, refer to page 45.)

Battery

Important Note:

When replacing batteries, use

only new or fully recharged

batteries and do not mix

Alkaline, NiMH, NiCad or

Lithium batteries.

Rechargeable batteries typi

cally display less capacity than

Alkaline batteries.

er’s instructions for proper care

and disposal of used batteries.

When using ‘Battery Saver’ or

not navigating, Alkaline batter-

ies can last up to 18 hours.

Press & Release POWER

Button quickly to turn

Backlighting On/Off

-

To adjust the screen contrast:

When on the Satellite Page, use the ZOOM IN or

OUT buttons to adjust the contrast.

Use ZOOM IN & OUT

Buttons while on the Satellite

Page to Adjust Contrast

3

Getting Started

Main Page Basics

Satellite Page

Map Page Navigation Page

Trip Computer

Main Menu

All of the information you need to operate the eTrex Legend can be found on five
main pages (or display screens). You can press and release the PAGE button to cycle
through the Satellite Page, Map Page, Navigation Page, Trip Computer, and Main Menu
Page.

While these five pages provide you with different types of navigation information,
they all share common features like Option Menus and a Main Page Menu, both of
which are accessed by on-screen buttons. To display these menus, highlight the on­screen button and press in on the

Option Menu Button

Option Menu

These menus provide addi

tional features or allow you

to customize the unit to your

To exit these and other

pop-up type menus, move the

THUMB STICK to the left

THUMB STICK.

preferences.

or right.

Main Page Menu

-

Button

Main Page Menu

Use to go directly to a Main
Page and as an alternate to

cycling through the Main

Pages.

Double click the on-screen

button to toggle between

two Main Pages.

4

Status Window

Satellite

The Main Page

On-Screen

Page and Option

Menu Buttons

Inner Ring (Satel-

lites within 45°

angle from vertical)

Signal Strength bars

Satellite Page

with 10 Satellites Being

Tracked and WAAS Enabled.

WAAS Satellite is No. 35
and ‘D’ in Signal Bars for

GPS Satellites

Outer Ring

(Satellites on the

horizon)

Center (Satellite

overhead)

Your location

coordinates and

Elevation

The Satellite Page provides a picture of satellite signal tracking, tells you when the

unit is ready for navigation, and shows your location coordinates.

The Skyview graphic represents a view looking up at the sky from your current
location showing satellites and their assigned numbers. The outer ring represents the
horizon around you, the inner ring represents a view above you at a 45° angle from ver­tical, and the center represents directly overhead. Signal Strength Bars for each satellite
are shown just below the Skyview. Satellites and their signals appear as hollow shapes
until a signal is received and then they appear darkened in. The stronger the signal, the
taller the signal bar.

The Wide Area Augmentation System (WAAS) capability produces a more accurate
position fix. When enabled (the GPS mode set to ‘Normal’ and the interface set to other
than RTCM mode), this feature searches for a WAAS satellite near your location and
then receives data for correcting differentials in the GPS satellite signals and the WAAS
satellite numbers (Number 33 or above) display on the Satellite Page. When differential
correction data has been received for GPS satellites (number 32 or below), a ‘D’ displays
in the signal bar beneath the skyview. It is helpful to orient the unit antenna toward the
WAAS satellite shown in the skyview. To learn more about the WAAS System, access the
Federal Aviation Administration web site (http.//gps.faa.gov/).

5

Satellite

Options

Satellite Page Options Menu

Highlight the on-screen button

at the top of the page & press

in on the THUMB STICK.

The Satellite Page

Options Menu

“GPS Off”

Message

‘North Up’ Skyview Orientation

6

The Satellite Page options include:

Use With GPS Off - Use this option when you are
indoors, a clear view of the sky is obstructed, or you
want to save battery power. You can enter data, create
routes, etc., but cannot navigate in this mode.

Track Up/North Up - You can orient the satellite
skyview by selecting ‘Track Up’ (your direction of
travel) or ‘North Up’ (the satellite skyview oriented to
the north).

New Elevation - You can manually enter a new,
more accurate elevation, if known, to increase posi

-

tion accuracy.

New Location - If you are more than 600 miles from
where you last used the unit, select the ‘New Loca

­tion’ and then the ‘Use Map’ options to approximate
your location. This gives the unit reference informa­tion and speeds satellite acquisition.

To select the ‘Use With GPS Off’ option:

1. Use the THUMB STICK to highlight the Option

Menu button at the top of the page and then press
it in to display the Options Menu.

2. Use the

The eTrex Legend stops tracking satellites and

THUMB STICK to highlight the ‘Use With

GPS Off’ option and then press it in to activate.

should not be used for navigation. However, the
next time you turn the unit on, it returns to Normal
GPS operation.

To select ‘Track Up’ or ‘North Up’:

1. Use the THUMB STICK to highlight the Option

Menu button at the top of the page and then press
it in to display the Options Menu.

2. Highlight either the ‘Track Up’ or ‘North Up’ option

(depending on which is currently in use), and press
in on the THUMB STICK to activate.

How to enter a new elevation:

1. Use the THUMB STICK to display the Options

Menu.

2. Highlight ‘New Elevation’ and then press in on the

Satellite

3. Enter the desired elevation by using the
THUMB STICK to highlight the desired numerals
and pressing it in. Highlight ‘OK’ and press in to
complete entry.

To enter a new location:

1. Use the THUMB STICK to highlight the Option
Menu button at the top of the page and then press
it in to display the Options Menu.

2. Highlight ‘New Location’ and press in on the
THUMB STICK to display choices of ‘Auto’ or ‘Use
Map’.

If you choose ‘Auto’ the eTrex Legend determines

your new location automatically.

If you choose ‘Use Map’ a map page displays with

instructions stating, “Point to your approximate
location and press ENTER”. Use the
to move the map pointer to your location on the
map and press it in.

THUMB STICK

The eTrex Legend relies on satellite signals to provide
navigational guidance, so getting a clear view of the sky
is necessary because GPS signals do not travel through
rocks, buildings, people, metal, or heavy tree cover. At
least three satellite signals are needed to determine your
location, otherwise the unit displays a “Poor Satellite
Reception” message. This message provides four options
and a brief explanation to guide your choice:

Use with GPS Off - Select this option if you want

GPS off (for faster map drawing).

New Location - Select this option if you have moved

hundreds of miles (from where you last used the

unit).

Restart Search - Select this option if today is not

(date provided).

Continue Acquiring - Select this option if no other

option applies. (The unit will attempt to gather GPS

signals.)

Options

‘Use Map’ option helps to speed

acquisition.

There are four options for

the “Poor Satellite Reception”

message.

7

Navigating

Navigating with

eTrex Legend

A Goto

A Track

A Route

When not navigating on

a Goto, following a Track,

or Route, your travel is

indicated by the ‘Pointer

Icon’ and a dotted line

indicating your path.

Active Navigation is supported by three of the five
Main Pages: the Map Page, Navigation Page and Trip
Computer Page.

The Map Page graphically shows you map details,
your current location, marks your route to a destination
with a route line, and leaves a trail (track log) of where
you’ve been.

The Navigation Page tells you what direction to go
and the direction you are traveling.

The Trip Computer Page records and displays travel
data, such as the distance you have traveled, your speed,
the time spent moving or stopped, and other options can
be chosen to display the elevation, the time of day or the
time remaining before reaching a destination.

There are three methods of navigating when using
the eTrex Legend and each is graphically displayed on the
Map Page.

Goto - A direct path to a selected destination

(waypoint, city, address, etc.).

Track - A previous path of travel that has been stored

(logged) in the eTrex Legend. A Track allows you to

repeat a path or to return to your starting point on

the same path using the GARMIN TracBack feature.

Route - A path to a destination consisting of interme-

diate stops along the way (waypoints, cities, highway

exits, points of interest, intersections, etc.).

Travel that does not involve navigating on a Goto,
Track or Route is best explained as travel without entering
a destination in the eTrex Legend. The Map Page displays
your real-time movement as you travel with the unit
turned on and receiving satellite signals.

8

Map

The Main Page

On-Screen

Page and Option

Menu Buttons

Status Window

Position Icon

Map Scale

Map Features

The Map Page displays your present position and direction of movement using a
triangular ‘Position Icon’ that is centered on the map. As you travel, the map display
leaves a track log (“trail”) of your movements.

The map also displays geographic details such as rivers, lakes, highways, and towns.
The map shown above displays a higher level of detail than the basemap provided with
the unit (i.e. residential streets, parks, etc.), because GARMIN MapSource data has been
downloaded to the unit from the mapping program on the optional CD-ROM.

To allow you to view the map from different perspectives, the scale can be changed
from 20 feet to 500 miles. The ZOOM IN and OUT buttons on the side of the unit
allow you to zoom in or out on the map. Pressing and holding these buttons causes the
scale to change rapidly instead of changing in increments. The IN button displays less
area but more map detail, while the OUT button shows you a larger area with less map
detail.

A Status Window at the top of the page provides you with current satellite tracking
and position accuracy information.

9

Map

The Main Page

Zoom In

Zoom Out

Map Features

Map Scales

Accuracy Circle

Panning Arrow

(Map Pointer)

10

The Map Page

The Map Page shows your present position and
direction of movement as a triangular ‘Position Icon’, in
the center of the map. The map display also shows the
map scale and geographic details such as lakes, rivers,
highways, and towns.

Use the ZOOM IN and OUT buttons to change
the map scale in order to show more map area with less
detail or less map area with more detail. Press and hold
to ZOOM the map scale rapidly. The map scale in the
lower left hand side of the display is shown in units of
measurement selected in the ‘Units’ field of the Unit Setup
Page (not to be confused with the Map Setup Page). If
you zoom in so far that the resolution of the map data
is exceeded and the appearance of the map is no longer
accurate, the word, “overzoom” displays just below the
map scale.

In many instances the map displays an ‘Accuracy
Circle’ surrounding the ‘Position Icon’. The eTrex Legend
uses both map resolution and GPS accuracy in defining
your location to a point within the circle. The smaller the
circle, the more accurate your location.

When using the ‘Pan Map’ feature, a small outline
arrow (Map Pointer) can be moved about the page to
highlight and identify map items or to scroll the map to
view areas not shown on the display screen.

A Status Field at the top of the page provides satellite
tracking and location accuracy information.

Two optional Data fields at the bottom of the page
can be programmed to provide a variety of travel and
navigation information.

More detailed map features as well as information
about those features can be downloaded to the unit from
an optional GARMIN MapSource CD-ROM. When using
MapSource data, the word ‘mapsource’ displays below the
map scale whenever you zoom in to view map details.

Map

Map Page options allow a variety of operating and

custom features for your eTrex Legend.

Not all of the Map Page options are available at the
same time. Many are replaced by an opposite option
when they are selected, such as Hide Data Fields/Show
Data Fields. The Map Page options are:

Pan Map - Allows you to move the Panning Arrow

(Map Pointer) about on the map.

Stop Navigation - Stops navigating to a destination.

Hide Nav Status/Show Nav Status - Removes the

navigation status window to expand the map area or

inserts the navigation status window.

Hide Data Fields/Show Data Fields - Removes or

inserts two programmable data fields at the bottom of

the page and expands or reduces the map area.

Setup Map - Displays the Setup Map Pages, which

allows you to tailor the map to your requirements

such as changing text size, map orientation, and map

detail.

Measure Distance - Displays the distance from one

point on the map to another.

Restore Defaults - Returns the Map Page to the

original factory settings (defaults).

To select a map page option:

1. Highlight the Option Menu on-screen button at the
top of the display screen and then press in on the
THUMB STICK to open the menu.

2. Highlight the desired option on the menu and then
press in on the THUMB STICK to activate the
option.

3. To close without making a selection, move the

THUMB STICK to the left or right.

Options

On-screen Map Page

Options Menu button

Map Page Options Menu with

‘Pan Map’ selected.

When no active navigation is
being used, ‘Stop Navigation’

cannot be selected.

If ‘Show Data Fields’ is selected,

it is replaced by the ‘Hide Data

Fields’ option.

The ‘Setup Map’ option consists

of five sub-pages.

11

Map

Options

Map Page with

Panning Arrow

Highlighted Map Item

Using the Pan Map option

The Map Page pan function allows you to display
an arrow used to point at and identify items on the map,
and to move the map in order to view areas beyond the
current viewing area on the display.

The map panning function is activated from the
Options Menu on the Map Page. The THUMB STICK
moves the panning arrow (also referred to as the map
pointer) in the desired direction on the map page. If the
arrow moves to the edge of the map display, the map also
moves to reveal more area but redraws the map slowly.

Whenever the panning arrow is placed on a map
item, the name of that item is highlighted. This features
applies to waypoints, roads, lakes, rivers...nearly every­thing that is displayed.

Pressing the THUMB STICK marks the arrow
location or displays the map item information page. An
Options Menu allows you to: add it to the Favorites list,
add it to a route, project a waypoint from it, save it as
a waypoint, or view the sun and moon phase from it.
On-screen buttons at the bottom of the page allow you to
Goto the map item, display it on the map or to select ‘OK’
and return to the Map Page.

When using the panning arrow, pressing the

FIND

button displays items with the panning arrow (map
pointer) location used as a reference point for nearest
items instead of your current location. Press the PAGE
button to return to the Main Map Page.

To find details about or Goto a map item:

1. Use the THUMB STICK to move the panning arrow
to the map item that you want to learn more about.

2. When the item’s name is highlighted, press in the
THUMB STICK to display the Information Page.

3. Use the

THUMB STICK to highlight and press the

‘Goto’ button on the page to navigate to the item.

Map Item Information

12

Map

Stop Navigation

The ‘Stop Navigation’ option allows you to quit navi-

gating on a Goto, Route or Track in progress.

To stop navigation:

Select ‘Stop Navigation’ and then press in on the

THUMB STICK.

When there is no active navigation, the ‘Stop Naviga-

tion’ option is “grayed out” and is non-functional.

Hide/Show Navigation Status

The ‘Hide Nav Status/Show Nav Status’ option allows
you to view GPS navigation data in a window at the top
of the page that lists the status of satellite tracking and
accuracy of GPS positioning. When hidden, more map
area is displayed.

To hide or show Nav Status:

Select ‘Hide’ or ‘Show’ from the option list and then

press in on the THUMB STICK.

Hide/Show Data Fields

The ‘Hide Data Fields/Show Data Fields’ option allows
you to view two programmable data fields. When hidden,
more map area is displayed.

To hide or show Data Fields:

Select ‘Hide’ or ‘Show’ from the option list and then

press in on the THUMB STICK.

To program a data field:

1. Use the THUMB STICK to highlight the data field
and then press it in to display the Options Menu.

2. Highlight the desired option and then press in on
the THUMB STICK to place it in the data field.

Use the

ZOOM IN/OUT

buttons to jump to the first or

last item on the page, and to page up or down.

Bearing
Course

Destination

Current

Distance

Current
Current ETA

ETE

Current
Elevation
Final Destination
Final Distance
(Continued)

Options

‘Stop Navigation’ Option

Map Page with Nav Status and

Data Fields Hidden

Map Data Fields

with Options Menu

13

Map

Setup Options

Page Setup

Tracks Setup

Map Features Setup

Text Setup

14

(Continued)
Final ETA
Final ETE
Heading
Maximum Speed
Moving Avg. Speed
Odometer
Off Course
Overall Avg. Speed
Pointer
Speed

Sunrise
Sunset
Time of Day
To Course
Trip Odometer
Trip Time - Moving
Trip Time - Stopped
Trip Time - Total
Turn
Velocity Made Good
Vertical Speed

(For definitions, see Appendix C, pages 54-55.)

The ‘Setup Map’ option displays the five Map Setup
Pages, each accessed by an on-screen button. A list of
options displays for the features listed. Scale options
indicate the point at which Tracks, Tracks Logs, Map Fea­tures, or Text Boxes are visible, allowing you to remove
map clutter and define map features.

Page - Orientation:

top of the map display to the current track heading
or to a north heading.

Auto Zoom:

to display both your current location and the next
point to which you are navigating.

Detail:

Most, More, Normal, Less, or Least;

how much map detail you see. This setting only
applies to a map feature set to ‘Auto’. Those
features which have a specified scale or are turned
‘Off’ are unaffected by this setting.

Lock on Road:

MapSource Data is loaded; when ‘On’ the triangle
icon locks to the road that you are traveling

Display Mode:

light color while the other displays in a dark color.

Saved Tracks and Track Log:

Tracks -

‘Off’, ‘Auto’, or 20 ft.-500 miles, sets the maximum
scale at which the feature should appear on the
screen. Some types of data will display only to
certain zoom scales.

Goto Line:

pointer displays.

‘Track Up’ or ‘North Up’;

On or Off;

automatically scales the map

On or Off;

available only if

Land or Water;

Bearing or Course;

fixes the

controls

.

choice displays in

Scale options;

determines which

Map

Map Features - Points of Interest, Waypoints, Street

Label, and Land Cover,
or 20 ft.-500 miles, sets the maximum scale at
which the feature should appear on the screen.
Some types of data will display only to certain zoom
scales.

Text - Points of Interest, Waypoints, Street Label, and

Land Cover,
‘Large’

MapSource Info - Show, Check box;

Text sizes;

control the screen size of the name

Scale options;

‘None’, ‘Small’, ‘Medium’, or

‘Off’, ‘Auto’,

.

check mark

determines if map data is used or not.

To use Setup Map options:

1. Select ‘Setup Map’ from the Options Menu and then
press in on the THUMB STICK to display the Map
Setup Page.

2. Highlight the desired sub-page button to display the
features list for that sub-page.

3. Highlight a feature on the list and press in on the
THUMB STICK to display the options list for that
feature.

4. Use the

5. Press the PAGE

THUMB STICK to highlight the desired

option and then press it in to activate.

button or the on-screen ‘X’ button

to return to the Map Page.

Setup Options

Map Page Setup

Feature Options

Map Data

The Measure Distance option

To use the Measure Distance option:

1. Select ‘Measure Distance’ from the Options Menu
and then press in on the THUMB STICK to display
the Panning Arrow.

2. Use the

THUMB STICK to move about on the Map
Page until you reach the point to which you want to
measure. A new ‘Map Pointer’ field displays show
ing the location of the pointer and the direction and
distance from where you began measuring.

-

15

Navigation

The Main Page

Destination (Waypoint) Name

Time to Destination

Straight Line Distance

to the Destination

Bearing Pointer

Selectable Data Fields

Compass Ring

The Navigation Page provides active guidance with a rotating compass ring that
shows your course over ground (track) while you’re moving and a bearing pointer to
indicate the current direction to your destination (bearing) relative to the course over
ground.

The Status Window at the top of the page shows you the name of your destination,
the distance, and the time to go. Two Data Fields are provided, and can be programmed
to display a variety of navigation data.

The Bent (Bearing) Pointer arrow alerts you to the upcoming turn while you are
navigating a route. When you get within 15 seconds ETA of the current point, the
pointer “bends” to indicate the direction of the turn to the next point while still showing
the direction to the current point.

When you are not on an active Goto, Track or Route (in other words: not traveling
to a recorded destination), the window at the top of the page displays the status of the
GPS Receiver and the approximate accuracy of your current position. The Compass Ring
displays your heading while you are moving, but the data fields at the bottom of the
page will not display any destination related data, such as Estimated Time of Arrival.

16

Navigation

Navigation Page

The options include:

Stop Navigation - “Grayed out” unless you are
navigating on a Goto, Track, or Route.

Bearing Pointer/Course Pointer - Toggles between
Bearing (always directed at destination) and Course
(distinctive with dots across center of compass, shows
amount of correction needed to be back on course.)

Big Numbers/Big Compass - toggles to display data

fields in large text format while removing the Status
Window and reducing the size of the compass ring.

Restore Defaults - Returns options and data field
choices to factory designations.

At the bottom of the page are two data fields that
are user programmable with a choice of different data
options:

The Bearing Pointer and Compass Ring work inde­pendently of the direction of your movement and the
direction to your destination. The Bearing Pointer always
points directly to the destination, no matter what your
current location might be.

For example: if the arrow is pointing straight up,
you are going directly to your destination. If it points any
direction other than up, turn towards that direction until
the arrow is pointing up and then continue in that direc­tion. If you are using the ‘Course Pointer’ option instead
and you drift away from the line of travel to your destina­tion, the Course Deviation Indicator (CDI) provides
graphic indication of drift (right or left) and displays the
distance off course.

Options

Navigation Page

Options Menu

Navigation Page with

Course Pointer and

Course Deviation Indicator

(CDI) Scale active.

Use the ZOOM buttons to

adjust the CDI scale setting.

17

Navigation

Options

Bent pointer shows current

direction, the approaching turn,

and points towards the next

waypoint.

Navigation Page Data Fields

Options Menu

(The slider at the side of the

menu indicates a multi-page list

of options.)

To Setup the Navigation Page:

1. With the Navigation Page displayed, use the
THUMB STICK to highlight the Options Menu
button at the top of the page. Then press it in to
display the menu.

2. Use the

THUMB STICK to highlight your selection

and then press in to select it.

3. Use the

ZOOM IN/OUT buttons to jump to the first

or last item on the page, and to page up or down.

To change data fields:

1. Use the THUMB STICK to highlight the desired
data field and then press it in to display the list of
data options.

2. Select the desired option from the list and press in
on the THUMB STICK.

3. Use the

ZOOM IN/OUT buttons to jump to the first

or last item on the page, and to page up or down.

Bearing
Course

Destination

Current

Distance

Current
Current ETA

ETE

Current
Elevation
Final Destination
Final Distance
Final ETA
Final ETE
Heading
Maximum Speed
Moving Avg. Speed
Odometer

Off Course
Overall Avg. Speed
Pointer
Speed
Sunrise
Sunset
Time of Day
To Course
Trip Odometer
Trip Time - Moving
Trip Time - Stopped
Trip Time - Total
Turn
Velocity Made Good
Vertical Speed

(For definitions, see Appendix C, pages 54-55.)

18

Trip Computer

The Main Page

Selectable Data Fields

The Trip Computer Page displays up to eight different types of navigation data and
are user programmable. Each data field is selectable and can contain one of many data
information options. The default settings for these fields are shown in the illustration.

By selecting the information options that you prefer and arranging them in a desired
order on the page, you can customize the Trip Computer Page to meet your navigation
needs.

The Options Menu allows you to reset the Trip Computer data when you are ready
to start a new trip.

19

Trip Computer

Options

Trip Computer Page

Trip Computer Page

The Trip Computer provides a variety of data fields

with read-outs of current information as you travel.

The Option Menu for this page provides the fol­lowing options: Reset, Big Numbers, and Restore
Defaults.

To program a data field:

1. Use the THUMB STICK to highlight the desired
data field and then press it in to open the data field
Options Menu.

2. Use the

3. Press in on the

THUMB STICK to move Up or Down the

menu to highlight a desired data option.

THUMB STICK to select the option

and place it in the data field.

To access the page Options Menu:

1. Use the THUMB STICK to highlight the Options
Menu on-screen button and press it in to display the
Options Menu.

2. Highlight the desired option and then press in on
the THUMB STICK to activate.

3. To activate individual ‘Reset’ options, highlight
the item on the list and then press in on the
THUMB STICK to place or remove the check mark.

20

Trip Computer

Trip Computer Page Data Fields

Use the

ZOOM IN/OUT

buttons to jump to the first or

last item on the page, and to page up or down.

The list of data field options with definitions is in

Appendix C, pages 54-55.

Bearing
Course

Destination

Current

Distance

Current
Current ETA

ETE

Current
Elevation
Final Destination
Final Distance
Final ETA
Final ETE
Heading
Location (lat/lon)
Location (selected)
Maximum Speed
Moving Avg. Speed

Odometer
Off Course
Overall Avg. Speed
Pointer
Speed
Sunrise
Sunset
Time of Day
To Course
Trip Odometer
Trip Time - Moving
Trip Time - Stopped
Trip Time - Total
Turn
Velocity Made Good
Vertical Speed

NOTE: Use care when choosing the ‘Delete’
options, as all stored Tracks, Waypoints, and
Routes can be permanently deleted when
resetting the Trip Computer.

Options

Data Field Options Menu

Reset Options Menu

Useful when starting a new trip

to clear old data.

21

Main Menu

The Main Page

The Main Menu Page with

Feature Icons

Battery Capacity, Time/Date,
and Backlighting Status Bar.

The Main Menu provides you with a directory of the eTrex Legend’s advanced
features. From the Main Menu page you can mark and create new waypoints; find map
items such as cities, interstate exits, addresses, points of interest, etc.; create routes; save
tracks; setup system operating features; or access and use unit accessories.

Main Menu Pages

&

To exit these pages,
highlight the on-screen ‘X’
button and press in on the

THUMB STICK

.

Setting the Correct Time Zone

If the time displayed in the field at the bottom of the Main Menu does not match
the time for your current location (time zone), use the Main Menu to access the Setup
Pages, select the Time Icon and then follow instructions for setting the time on page 43.

22

Main Menu

Using the Main Menu

The Main Menu

The Main Menu provides access to additional eTrex
Legend feature pages. The pages listed below provide
enhancements to eTrex Legend operation. Press the PAGE
button repeatedly to cycle to the Main Menu or select it
from the page list at the top of each main page.

Mark Waypoint Page - Allows you to mark and

store a waypoint for your current location or a map

pointer location.

Find Menu - Allows you to locate, and Goto, or use

as part of a Route; Waypoints, Favorite Locations,

Cities, Interstate Exits, Points of Interest, Addresses,

and Intersections. (Some require MapSource data.)

Route Page - Allows you to create and store routes

for repeated use.

Main Menu with Feature Icons

Tracks Page - Provides access to the track log and

saved tracks.

Setup Page -

Allows tailoring of items such as
time format, units of measure, display backlighting
timeout and contrast adjustment, interface setups,
heading selection and system software information.

Accessories Page - Allows you to access Sun and
Moon data, a Calendar, Hunting and Fishing data, a
Calculator, and an Area Calculator.

Information about the status of backlighting, time

and date, and unit power are displayed in the window at
the bottom of the Main Menu Page.

The battery icon displays the approximate amount

of reserve power available. When the unit is powered
by a cigarette lighter adapter, a power plug icon replaces
the battery icon. The date and time are displayed in the
center of the window and when backlighting is active the
light bulb to the right appears illuminated.

Page

and Power, Date/Time, and

Backlight Status Window

Power, Date/Time, and

Backlight Status Window

23

Main Menu

Mark

Mark Waypoint Page

Map Symbol List

Marking a Waypoint with the

Panning Arrow

The Mark Waypoint Page

The Mark Waypoint Page allows you to mark and
record your current (or any other) location as a waypoint
and appears with a graphic name block (man with a flag)
that displays the assigned number for that waypoint and a
waypoint symbol.

To mark your current location as a waypoint:

1. Press in and hold the THUMB STICK until the
Mark Waypoint Page appears. You can also access
this page by highlighting the Mark Icon on the
Main Menu Page and then pressing in on the
THUMB STICK. It automatically is assigned a 3­digit number.

2. To change the name of the waypoint, use the
THUMB STICK to highlight the waypoint name
field.

3. To assign an identifying symbol to a waypoint, use
the THUMB STICK to highlight the symbol block
just above the waypoint name.

4. To save the waypoint, highlight ‘OK’ and press in on
the THUMB STICK.

5. If you do not want to save it as a new waypoint,
press the PAGE button before pressing any other to
cancel.

To create a waypoint using the map panning
arrow:

1. With the Pan Map feature active, move the panning
arrow (map pointer) to the map item you want and
highlight it.

2. Press in and release the THUMB STICK
the item information page.

3. With the Information Page displayed, highlight the
Options Menu button at the top of the page and
then press the THUMB STICK to open the menu.

4. Highlight the ‘Save As Waypoint’ option and press
the THUMB STICK to save the map item as a
waypoint.

to display

24

To create a waypoint using the panning arrow
when a map item is not highlighted:

1. With the Pan Map feature active, move the panning
arrow (map pointer) on the map to the location you
want to mark and then, press the

2. The Mark Waypoint Page displays, automatically
assigning a number to the waypoint.

Be certain to press and release the

for this operation. Pressing in and holding the
THUMB STICK marks a waypoint for your current
location.

THUMB STICK.

THUMB STICK

To create a waypoint by manually entering its
coordinates (lat/lon):

1. Press in and hold the THUMB STICK to access the
Mark Waypoint Page.

2. Highlight the Location Field on the Mark Waypoint
Page, press the
coordinates using the numerical keyboard. Highlight
and press ‘OK’ when finished.

3. You may also change the waypoint name and/or
symbol.

THUMB STICK and enter the new

To move a waypoint:

1. Use the Find Menu to display the Waypoint Page for
the waypoint you want to move.

2. Highlight and press the ‘Map’
display the map for the waypoint.

3. With the waypoint highlighted by the panning
arrow, press in and release the
word “Move” displays beneath the panning arrow.

4. Use the panning arrow to drag the waypoint
to the new location and then press in on the
THUMB STICK to place it.

5. Press the PAGE
THUMB STICK to cancel moving of the waypoint
and return to the Main Pages.

button before pressing the

on-screen button to

THUMB STICK. The

Main Menu

Mark Options

Marking a Waypoint on the

map without

highlighting a map item.

Creating a

Waypoint by

entering

coordinates.

Moving a Waypoint

25

Main Menu

Mark Options

Enter Distance and

Bearing to Project a Waypoint

Waypoint Symbol Field

Waypoint Name Field

Using the keyboard to edit

26

Projecting a Waypoint

Projecting a waypoint from any map item (another
waypoint, etc.) allows you to establish a new waypoint on
a bearing and distance projected from that map item.

To project a waypoint:

1. Select a map item from the Find Menu.

2. Highlight the Option Menu
the top of the Information Page and press the
THUMB STICK to display the Project Waypoint
Page.

3. Press the
cal keyboard for entering the distance. Move from
numeral to numeral pressing the THUMB STICK to
enter numbers.

4. Enter the distance and bearing to the projected
waypoint in the appropriate fields and then select
‘OK’ and press the THUMB STICK to complete.

THUMB STICK to display the numeri-

on-screen button at

Editing a Waypoint

You can personalize a Waypoint by changing the

Name field and map Symbol field to make them easier to
recognize or can change the coordinates or elevation. It

can also be deleted.

To edit a waypoint:

1. Use the Find Menu to display the waypoint.

2. Use the THUMB STICK to highlight the Waypoint
symbol field and then press to display the symbol
list. Use the THUMB STICK to move up and down
the list to highlight a symbol and then press to
place the symbol in the symbol field.

se the THUMB STICK to highlight the Waypoint

3. U

name,

location coordinates or elevation fields

field,

and then press to display the keyboard.

4. Use the

THUMB STICK to highlight the desired
characters and then press. Repeat the process until you
are through.

5. Highlight ‘OK’, and then press the THUMB STICK to
save the changes and close the keyboard.

Main Menu

To delete a waypoint:

1. Use the Find feature to display the waypoint.

2. Highlight the ‘Delete’ button and then press the

THUMB STICK.

To save Map or Find Menu items as waypoints:

1. Access the Information Page for the desired item
(highlighted from the map or selected from the Find
Menu).

2. Open the Options Menu at the top of the page,
select ‘Save As Waypoint’ and press in on the
THUMB STICK to save the item to the Waypoints
List.

3. Highlight the ‘Save As Waypoint’ option and press
Straight Down on the THUMB STICK.

The Find Menu

The Find Menu allows you to find stored locations
(waypoints) and map items (cities, exits, etc.). They can be
found by name or by those nearest to your current location
(Position Icon). If you are using MapSource MetroGuide
data, the list of find locations is expanded to include
categories for Points of Interest, Street Addresses and
Intersections.

Press the

For some categories, there are two methods of list

FIND button to access the Find Menu.

­ing. The “By Name” list contains every item in the map
database for the selected category, while the “Nearest” list
contains only those items that are near to your Current
Location or the Map Pointer. Categories listed by either
method displays a choose prompt.

Find

Any Map or Find Menu item
can be saved as a Waypoint.

Find Page using your

current location as a point of

reference

‘Near Map Pointer’ or ‘By

Name’ Prompt displays when

using Map Pointer

These pages are structured with a set of sub-menus and
location information pages that guide you through the pro

­cess of finding locations. Use them to construct a Route,
establish a direct line of travel (Goto), or when gathering
information.

Item Information Page

27

Main Menu

Find Options

Waypoint Find List

Waypoint Information Page

Finding a Waypoint

Waypoints that you have created and stored in the
eTrex Legend can be found by selecting the “Waypoint’
option from the Find Menu. You can find a waypoint
from the list of waypoints using the ‘By Name’ or ‘Nearest’
options as explained on the previous page. When selected
from the list, the waypoint displays on the Waypoint
Information Page.

The Waypoint Information Page displays the
waypoint name or number, a map symbol, the location in
lat/lon, elevation, distance, bearing, and three on-screen
buttons for ‘Goto’, ‘Map’, and ‘OK’ functions.

To find a waypoint:

1. Use the THUMB STICK to select the Waypoint
option from the Find List and then press it in to
display a prompt to select ‘By Name’ or ‘Nearest’.
Select, then press the
Waypoints List.

2. Use the

3. With the Information Page displayed, you can select

4. Use the Options Menu to add the waypoints to the

THUMB STICK to select the desired
waypoint from the list and then press it in to display
the Information Page for that waypoint.

‘Goto’ to create a direct line of travel to the
waypoint. Select ‘Map’ to view the waypoint loca
tion on the map or select ‘OK’ to close the page.

‘Favorites’ list, add it to an existing route, project
a new waypoint from this location, view sun and
moon, and best fishing and hunting time informa
tion for this waypoint.

THUMB STICK to display the

-

-

Favorites Category

28

Main Menu

Finding a Favorite

Favorites are map items and waypoints designated as
those you would like to give a special status, as they are
frequently used or have other special significance. The
process for finding favorite waypoints from the ‘Favorites’
list is the same as finding a regular waypoint.

To find a ‘Favorite’:

1. Use the THUMB STICK to select the ‘Favorites’
option from the Find List and then press it in to
display the list. Use the list Options Menu to select
‘By Name’ or ‘Nearest’.

2. Use the

3. With the Information Page displayed, you can select

4. Use the page Options Menu to add the item to an

Finding a City

THUMB STICK to select the desired Favor­ite from the list and then press it in to display the
Information Page for that item.

‘Goto’ to create a direct line of travel to the item.
Select ‘Map’ to view the waypoint location or select
‘OK’.

existing route, project a new waypoint from this
location, or view sun and moon position data for
this time and date.

Cities can be found by selecting the ‘Cities’ option of
the Find Menu, selecting the city from the list of ‘Nearest’
or ‘By Name’, and then displaying the City Information
Page.

The City Information Page for the selected city dis­plays the city name, the size by population, and distance
from your location. You can view it on the map or create
a Goto direct route to the city from your current location,
or from a location defined by the Panning Arrow (Map
Pointer). You can also save it as a waypoint, or add it to
an existing route.

Find Options

Favorites List

Find List for Nearest Cities

City Information Page

29

Main Menu

Find Options

List of Exit

Types

Exits List

Exit Information Page

To find a city:

1. Use the THUMB STICK to select the ‘Cities’ option,
then press it in to display the find ‘By Name’ or find
by ‘Nearest’ prompt. Selecting ‘By Name, displays
the keyboard to eliminate scrolling through the list
of cities.

2. If using find ‘By Name’, begin spelling the name
of the city by using the keyboard. When you have
entered enough characters to define the name, a
match list displays. If you are using find ‘By Nearest’
scroll through the list to find the city you want. Use

the THUMB STICK to select the desired city from
the list and then press it in to display the Informa­tion Page for that city.

3. With the Information Page displayed, you can select
‘Goto’, ‘Map’, or ‘OK’ options.

Finding an Exit

You can use the Find Exit option to locate a nearby
exit on an interstate highway. Exits are listed only by
‘Nearest’. Exit information pages provide a variety of
information about services near each exit, including rest
stops, lodging, restaurants, service stations, etc. Some
services (i.e. service stations) on this page can be selected
and a separate information page displays with specific
information concerning what types of fuel, mechanical
and food services are available.

To find an exit:

1. Press the FIND button to display the Find Menu.

2. Use the

3. Highlight and select an exit type by pressing in on

4. A list of exits nearest to you displays. The title box

THUMB STICK to highlight ‘Exits’ and then

press it in to display the Exit List.

the THUMB STICK.

indicates the interstate highway which is served
by the exits. Two fields at the bottom of the page
indicate distance and bearing to the exit.

Services Information

30

Main Menu

5. Scroll through the list to highlight the desired exit.

6. Press in on the
mation Page for that exit. This page contains the
exit description with a list of available services near
that exit along with the distance and bearing fields.

7. Use the
services and highlight a selection from the list.

8. Press in on the
mation Page for the selected service.

The Exit Services Information Page displays the

name of the service, its direction from the exit, and
a list of the services available, each marked by a
check.

At the bottom of these Information Pages are

screen buttons for ‘Goto’, ‘Map’, and ‘OK’.

9. Use the Options Menu at the top of the page to
save the exit as a waypoint, ‘Favorite’, project a
waypoint, or add to an existing route.

THUMB STICK to display the Infor-

THUMB STICK to move to the list of

THUMB STICK to display the Infor-

on-

Finding a Point of Interest

You can use the Find Point of Interest option to
locate a nearby restaurant, lodging, landmark, public
building, park, etc. However, you must have transferred
a MapSource MetroGuide map to the unit map database
otherwise this option, plus Address and Intersection
options, displays grayed out and are not functional.

Here is a list of Point of Interest categories:

Food & Drink Services

Lodging Transportation

Attractions Emergency & Govt.

Entertainment Manmade Places

Shopping

In many instances, these categories are subdivided
into types, such as in the instance of Food & Drink.
When you select Food and Drink from the list of catego­ries, you are then presented with a list of types which
includes ‘All Types’ and cuisine options such as American,
Asian, Barbecue, Chinese and many more.

Find Options

Points of Interest List

Food & Drink Categories

Nearest Fast Food List

31

Main Menu

Find Options

Point of Interest Info Page

Finding a Point of Interest -

(Continued)

Once you have selected an item, you can display the
Information Page for that item. You can then use the on­screen buttons to ‘Goto’ or view the location on the ‘Map’;
or use the Options Menu for more choices.

To find a point of interest:

1. Press the FIND button to display the Find Menu.

2. Use the

3. Use the

4. Use the

5. Use the Options Menu at the top of page to select

6. Use the

7. Use the on-screen buttons to ‘Goto’ or view on the

THUMB STICK to highlight ‘Points of
Interest’ and then press it in to display the Points of
Interest Categories List.

THUMB STICK to select the desired cat­egory and then press it in to display the Types List.

THUMB STICK to select the desired type
and then press it in to display the list for that type.

from either ‘By Name’ or ‘Nearest’ options. Selecting
‘By Name’ displays a keyboard allowing you to
enter the characters of the name you want. A list
of matches displays when enough characters are
entered.

THUMB STICK to highlight your selec­tion from the list and then press it in to display the
Information Page for that item.

‘Map’, or use the page Options Menu.

Find Address Page

Entering an Address

32

Finding an Address or Intersection

You can enter a street number, choose a street name
from a list and find an address within the area of map
data coverage or enter two street names and locate the
intersection. To use these options, however, you must be
using a MapSource MetroGuide which provides this type
of map data.

To locate an address:

1. Press the FIND button to display the Find Menu.

Main Menu

2. Use the THUMB STICK to highlight ‘Address’ and
press it in to display the ‘Find Address’ page.

3. Highlight the’ Number’ field and use the keyboard
for entering numbers.

4. Move to the ‘Street’ field using the

5. Press in on the
‘Select Street Name’ list. Find the street by using the
keyboard to enter characters until a list appears.

6. With the desired street highlighted, press in on the
THUMB STICK to place the street name on the
Find Address page. Repeat this process for city and
postal codes, if desired. A window at the bottom of
the page displays a list of matches and the quality
of each match.

7. Use the
page to ‘Goto’, view the item on the ‘Map’, ’OK’ to
close, or use the Options Menu for other choices.

THUMB STICK to display the

on-screen buttons at the bottom of the

THUMB STICK.

To locate an intersection:

1. Display the Find Menu and use the THUMB STICK
to highlight the ‘Intersection’ category and press it
in to display the ‘Find Intersection’ page.

2. Highlight the first ’Street’ field and then press in on
the THUMB STICK to display the ‘Street‘ list.

3. Enter the name of the street in the name field at
the top of the list using the keyboard data entry
method. Once you have spelled enough of the street
name, you a match displays, often with several
streets on the list. Press in on the
move the highlight to the street list and then scroll
up or down until you find the street name you want.
Press it in to place the name in the field.

4. Highlight the best match and then press in on the
THUMB STICK to display the Information Page for
the intersection. Use the on-screen buttons at the
bottom of the page to ‘Goto’, view the item on the
‘Map’, ‘OK’ to close, or use the Options Menu for
other choices.

THUMB STICK to

Find Options

Find Intersection Page

Find Street Keyboard

Information Page Options

33

Main Menu

Find Options

Information Page

Navigation Page

A Map Page Goto

34

Using a Goto to Navigate to a Destination

The Goto function allows you to create a direct route
to a destination, (waypoint, city, or point of interest).
Once you have accessed the Information Page for an item,
use the Goto button at the bottom of the page to initiate
travel to a map item using the Map and Navigation Pages
for guidance.

To activate a Goto:

1. Use the Find Menu to access the Information
Page for any desired destination and use the
THUMB STICK to highlight the Goto button.

2. Press in on the

3. Observe the Navigation Page, it displays the name
of your destination, the distance from your current
location, and a Bearing Pointer indicating the
direction you should travel. The time required to
reach your destination displays when you begin to
travel and establish a predicted rate of movement.
The Data
information relative to your travel as appropriate for
the type of data selected to appear in those fields.

4. Use the PAGE button or Main Page Menu to access
the Map Page and observe your movements and a
dark line indicating the direct path from your cur­rent location to your destination.

5. Use the Bearing Pointer on the Navigation Page to
maintain travel in the right direction and observe
distance and time information to monitor your
progress.

6. When you are close to your destination, an “Arriving
at Destination” message appears. If you move past
the destination the Bearing Pointer reverses and the
distance display increases.

THUMB STICK to start navigation.

Fields at the bottom of the page displays

To stop navigation:

1. Highlight the on-screen Options Menu button at the
top of the Navigation or Map Page and press in on
the THUMB STICK.

2. Select ‘Stop Navigation’, then press in on the
THUMB STICK.

Main Menu

Creating and Using a Route

Route navigation allows you to create a sequence
of intermediate waypoints which lead you to your final
destination. The eTrex Legend stores 20 routes, each with
up to 50 waypoints. A route can be created and modified
from the Route Page, and waypoints can be added to a
route from the Find Menu. More complex routes can be
created using a PC and MapSource mapping programs
and then transferred to the unit memory.

To create a route:

1. Access the ‘Routes’ page from the Main Menu. The
page has a ‘New’ button, a list of routes, and the
number of unused routes.

2. Use the

3. With an empty row (dashed) in the route list high

4. Use the Find Menu to select a route waypoint from

5. To add more waypoints to the route, repeat the

THUMB STICK to highlight the ‘New’
button and press it in to display the route Setup
Page.

­lighted, press in on the THUMB STICK to display
the Find Menu.

one of the Find Menu categories and display the
Information Page for the selected waypoint, city,
exit, point of interest, etc. Highlight the
‘OK’ button and press in on the THUMB STICK to
place it on the Routes List.

process in Steps 3 and 4. The route is named for the
first and last waypoints on the route.

on-screen

You can add waypoints to the end of an existing route

at any time by using the Find Menu.

To add a Find Menu item to a route:

1. Select an item from the Find Menu and display its
Information Page.

2. Display the page Options Menu and select the ‘Add
To Route’ option to display the Routes List.

3. Highlight and select the route desired and then
press in on the THUMB STICK. A “Waypoint Added
Successfully” message displays.

Routes

The Routes Page with a list

of Routes and the number of

Unused Routes.

A Route with list of waypoints.

“Add To Route” option

from the Find Menu

Information Pages

35

Main Menu

Routes Options

A Route Options Menu

Route Area in Acres

Routes List With Two Copied

Routes

Copied Routes have a ‘1’ Suffix

Delete Route Prompt

36

Editing a Route

To remove all waypoints:

1. Select the Route Page options button and press the
THUMB STICK in to access the Options Menu.

2. Highlight the ‘Remove All’ option and then press
in on the THUMB STICK. At the prompt “Do
you really want to remove all waypoints from the
route?”, select “Yes”.

To reverse the route:

1. Select the Route Page options button and press the
THUMB STICK in to access the Options Menu.

2. Highlight the ‘Reverse Route’ option and then press
in on the THUMB STICK to reverse the order of
waypoints in the list. To change the route back to
the original order, repeat this process.

To copy the route:

1. Select the Route Page options button and press the
THUMB STICK in to access the Options Menu.

2. Highlight the ‘Copy Route’ option and then press
in on the THUMB STICK to copy. The copied route
displays on the Routes Page and is named the same
but followed by a numeral 1. You may then rename
and/or modify the copied route.

To delete the route:

1. Select the Route Page options button and press the
THUMB STICK in to access the Options Menu.

2. Select ’Delete’ and then press in on the
THUMB STICK. When you see the prompt “Do you
really want to delete route?”, select “Yes”.

To figure the area encompassed by the route:

1. Select the Route Page options button and press the
THUMB STICK in to access the Options Menu.

2. Select ’Route Area’ and then press in on the
THUMB STICK to see the area expressed in acres.

Press in on the

figure expressed in other terms such as square feet,
square miles, or metric measurements.

THUMB STICK to see the area

Main Menu

To restore default settings for the route:

1. Select the Route Page options button and press the
THUMB STICK in to access the Options Menu.

2. Select ’Restore Defaults’ and then press in on the

THUMB STICK to restore factory settings.

To review a waypoint:

1. Select the waypoint from the Route Waypoints
List and press the THUMB STICK in to access the
Options Menu for the waypoint.

2. Highlight ‘Review’ and then press in on the
THUMB STICK to display the Information Page.

3. Highlight the on-screen ‘OK’ button and then press
in on the THUMB STICK to return to the Route
List.

To insert a new waypoint on the route list:

1. Select the row where you want the new waypoint
inserted before. Press the
access the Options Menu.

2. Highlight ‘Insert’ and press in on the
THUMB STICK to display the Find Menu and select
a new waypoint, city, exit, point of interest, etc.

3. With the new waypoint highlighted, press in on the
THUMB STICK to display the Information Page for
the new waypoint and then select the on-screen
‘OK’ button to add it the route.

THUMB STICK in to

To remove a waypoint from the route list:

1. Select the waypoint that you want to remove from
the Route Waypoints List and press in on the
THUMB STICK to display the Options Menu.

2. Highlight ‘Remove’ and press in on the
THUMB STICK to remove the waypoint from the
list.

To change a route waypoint:

1. Select the waypoint that you want to change
from the Route Waypoints List and press in on the
THUMB STICK to display the Options Menu.

2. Highlight ‘Change’ and press in on the

THUMB STICK to display the Find Menu or create

Routes Options

Route Page with

Waypoint List

Route Waypoint

Options Menu

Using the Find Menu to change

a Route Waypoint

37

Main Menu

Routes Options

Moving a Route Waypoint by

clicking and dragging.

Map Page Route Options

Adding a Route Waypoint to

an end point on the Route

Map Page

38

To change a route waypoint:

3. Select a new waypoint, access its Information Page
and press the on-screen ‘OK’ button to replace the
old route waypoint.

(Continued)

To move a route waypoint:

1. Select the waypoint from the Route Waypoints
List and press the THUMB STICK in to access the
Options Menu for the waypoint.

2. Highlight the ‘Move’ option and press in on the
THUMB STICK to select the waypoint.

3. Use the

THUMB STICK to move the waypoint up
or down in the list. Press in on the
to leave the waypoint in the new list order.

THUMB STICK

Adding or Editing from the Route Map Page

You can use the panning arrow with the Route Map

Page displayed to add or edit route waypoints.

To add a waypoint at either end of a route:

1. Select the Route from the Routes List and press the
THUMB STICK in to display the Route Page.

2. Highlight the on-screen ‘Map’
of the page and press in on the THUMB STICK to
display the Route Map Page.

3. Use the

4. Move the panning arrow to a map item or location

THUMB STICK to move the panning arrow
to either end of the displayed route until the end
waypoint is highlighted. Then press it in to display
the map Options Menu and select ‘Add Turns’. This
option appears only when highlighting the end
point of a route.

where you would like to extend the route and press
in on the THUMB STICK to display the Information
Page for the new waypoint. Press the on-screen
‘OK’ button to return to the map page and then
press it again to place the new waypoint.

button at the bottom

To add a route waypoint within a route:

1. Follow steps 1 and 2 in the previous instruction.

2. Use the

THUMB STICK to move the panning arrow
to a route line. When the arrow touches the line,

Main Menu

the line becomes thin. Press in on the

THUMB STICK to display the word ‘ADD’ next to
the line.

3. Drag the line to a map item or other location where
you want to establish a new waypoint and then
press in on the THUMB STICK to place the new
waypoint. A waypoint information page displays.
Press the on-screen ‘OK’ button to save the new
waypoint, then press it again after returning to the
Route Map.

To review or remove a route waypoint:

1. Select the Route from the Routes List and press the
THUMB STICK in to display the Route Page.

2. Use the

3. Use the

THUMB STICK to highlight the desired
route and press in to display the Route Page for that
route.

THUMB STICK to move the map panning
arrow to the waypoint you want to review and press
in to pop-up the Options Menu. Select ‘Review’ or
‘Remove’ and press in again to either display the
Information Page or remove it from the route.

To view the next waypoint in the route:

1. Follow Steps 1 and 2 above.

2. Place the map panning arrow on the waypoint you
are currently viewing and press in to display the
Options Menu. Select ‘Next’ and press in again to
view the next waypoint.

Routes Options

Adding a new waypoint within

a Route

Navigation Page with

Bearing Pointer

Navigating a Route

A Route can be navigated using the Map Page or the
Navigation Page. The Map Page displays your movement,
the route line, and waypoints on the route. The Naviga­tion Page shows compass direction and a bearing pointer.

To navigate a route:

1. Select a route from the Routes List and then press in
on the THUMB STICK to display the Route Page.

2. Highlight the on-screen ‘Navigate’ button at the

Navigating a Route on the

Map Page

39

Main Menu

Routes Options

Data Field Options Menu

Distance to Point vs Leg
Distance. To view Leg informa
tion, highlight the end waypoint

on a leg.

40

-

Navigating a Route

(Continued)

bottom of the page and then press in on the

THUMB STICK to begin navigating the route.

The screen changes to the Navigation Page.

3. Move to the Map Page to view the route and the
position icon indicating your current location.

4. Begin moving, watching directional information on
the Navigation Page or progress on the Map Page.

To stop navigation:

Highlight the ‘Stop Navigation’ option on either the

Navigation or Map page or select the ‘Stop’ button
on the Route Page.

Data Fields for the Route Page

When navigating a Route, the data displayed in
the data fields on the Route Page may be customized to
provide useful navigation information that is specifically
related to route navigation.

Data options (for Route Page only) include:

Distance to Point - The distance from your current location

to a route waypoint.

ETA To Point - Estimated Time of Arrival at a route waypoint

(in sequence).

ETE To Point - Estimated Time Enroute to a route waypoint.

Leg Course - The line of travel between two route waypoints.

Leg Distance - The distance between two route waypoints.

Leg Time - The time required to travel from a route waypoint

to the next.

Pointer - Direction pointer to a route waypoint.

Sunrise At Point - Time of sunrise at a route waypoint.

Sunset At Point - Time of sunset at a route waypoint.

To select data field options:

1. Use the THUMB STICK to highlight a data field
on the Route Page and then press in to display the
Data Field Options Menu.

2. Use the

THUMB STICK to highlight the desired
option and then press in to enter the option in the
data field.

Main Menu

Using Track Logs

The eTrex Legend draws an electronic bread crumb
trail on the Map Page as you travel along. This bread
crumb trail is the ‘Track Log’. The Track Log contains
information about points along its path, including time,
and position. The eTrex Legend uses this information to
allow you to navigate using the saved track.

The ‘TracBack’ feature allows you to return along a
traveled path without marking any waypoints. When you
are ready to return to where you started, the eTrex Legend
takes you back by following the ‘Track Log’ that you
left behind. You can save a total of ten tracks in the unit
memory. The Track Log starts recording as soon as the
unit gets a satellite location fix and the Track Log feature
is turned on. When you no longer need a Track Log you
can press the on-screen ‘Clear’ button to remove it.

If you want to keep a record of a certain track log or
use the ‘TracBack’ feature, clear the Track Log before you
start traveling. The percentage of memory used by the
current track log displays at the top of the page. After the
Track Log is ‘Cleared’, it displays zero percent. When the
display reaches 100%, the most recent track points start
to overwrite the least recent if the default setting ‘Wrap
When Full’ remains selected on the track log setup. To
avoid losing track points, save the Track Log when it
approaches the 99% mark.

The Saved Track Page displays the track and it also
can be displayed on the Main Map Page as you navigate.

The ‘TracBack’ feature allows you to retrace your
track in both directions. Tracks are marked BEGIN and
END.

You can set the track recording interval to change
based on Distance (from 0 to 9.99 miles), Time (up to 99
hours, 59 minutes, and 59 seconds), or Automatic ( More
Often, Normal, Less Often, or Least Often).

Use the Options Menu to delete all saved tracks.

Tracks

Tracks Page

Track on Main Map Page

For effective use of the

“TracBack” feature, clear the

Track Log before starting a

new trip or after saving the

Track Log.

Rename saved Track Logs to

help indentify them later.

41

Main Menu

Tracks Options

Saved Track Page

Save Track Options

TracBack Options

Track Log Setup Menu

Record
Method
Options

If you choose Auto-record, you

can set the recording interval

from More to Least Often. You

can set recording intervals for

Time or Distance

as desired.

42

To save and use a Track Log:

1. Access the ‘Tracks’ page from the Main Menu. The
page has On/Off buttons, a list of tracks, and the
number of unused tracks.

2. You can press in on the on-screen ‘Off’ button to
pause track logging. When track logging is active
the ‘On’ button appears to be recessed.

3. Highlight the ‘Save’ on-screen button and then
press the THUMB STICK to display the track log
‘Save Back Through’ list.

4. Use the

THUMB STICK to select the time and date

that you would like to save the track through.

5. Press in on the

THUMB STICK to save the track log

and display the Track Page.

The Track Page shows the track name, the total

distance of the track, the number of points along
the track, a ‘Show on Map’ option, and on-screen
buttons for ‘Map’, ‘OK’, and ‘Tracback’.

6. To enable the Tracback feature, highlight the
‘Tracback’ button and then press in on the
THUMB STICK. This displays the Tracback Menu
with two options. Highlight the desired option (‘To
Beginning’ or ‘To End’) and then press in on the
THUMB STICK to enable. Access the Map Page or
the Navigation Page to navigate the Track.

To use Track Log Setup options:

1. Highlight the Tracks Page Options Menu button
at the top of the page and press in on the
THUMB STICK to display the menu.

2. Highlight the ‘Tracks Log Setup’ option and then
press in on the THUMB STICK.

You can check the ‘Wrap When Full’ option

by highlighting it and then pressing in on the
THUMB STICK.

You can highlight the ‘Record Method’ and ‘Interval’

fields and press in on the

THUMB STICK to display
their options. ‘Interval’ options change to accommo
date the ‘Record Method’ choices.

-

Main Menu

The Setup Menu

The Setup Pages allow you to customize your eTrex
Legend to your personal preferences. You can choose
time settings, units of measure, display backlighting and
contrast settings, heading measurement, interface options
and system operating mode.

By highlighting the icons on the Setup Menu and
then pressing in on the THUMB STICK, you can display
the Setup Page for each of the menu items.

Time Page

You can set the time to match your location or for a
projected location anywhere in the world.

Time Format - Allows you to choose from 12 or 24
hour time format so the clock displays like a standard
clock with 12-hour AM and PM cycles or display a 24­hour cycle (Military Time).

Time Zone - Can be set to one of the eight US Time
Zones, or 24 International Time Zones (nearest city or
geographical region). Select ‘Other’ so you can enter the
UTC Time Offset.

Daylight Savings Time - Can be turned On or Off
or set to Automatic.

To set the time:

1. Use the PAGE button to access the Main Menu.

2. Use the

3. Use the

4. Use the

5. Highlight a time zone from the list and then press in

6. The correct time displays at the bottom of the page.

THUMB STICK to highlight the Setup Icon

and then press it in to display the Setup Menu.

THUMB STICK to highlight the Time Icon

and then press it in to display the Time Page.

THUMB STICK to highlight the ‘Time Zone’

field then press it in to display the time zone list.

on the THUMB STICK.

Setup

Setup Menu

Time Setup Page

Time Format

Options

Daylight

Savings
Options

Time Zone Options

43

Main Menu

Setup Options

Units Page

Position Format

Options Menu

Map Datum Options

Menu

Vertical Speed

Distance/Speed

Options

Elevation Options

44

Depth Options

Options

Units Page

The Units features are best used by individuals with
a working knowledge of map grids and datums. To learn
more about these subjects, visit the National Imagery and
Mapping Agency at http://www.nima.mil or inquire at
your library.

Position Format - Allows you to choose from
different grid formats. The default position format,
‘hddd°mm.mmm’ displays the latitude and longitude in
degrees and minutes and is most commonly used.

Map Datum - Offers a selection of nearly all map
datums in common use. Every map is based on a map
datum (a reference model of the earth’s shape) and is
usually listed in the title block of the map. If you are com­paring GPS coordinates to a paper map, chart, or other
reference, the map datum in this field must match the
horizontal map datum used to generate the map or other
reference. The default datum is WGS 84 (World Geodetic
Survey 1984). If a map does specify a datum, use the
options list to find datums applicable to the region of the
map, selecting the one that provides the best positioning
at a known point. If necessary, you also may choose the
‘User’ datum for custom designed grids.

Distance/Speed - You can choose from three units of
measure to display your rate of travel.

Elevation - You can choose from two units of mea­sure to display your elevation.

Vertical Speed - You can choose from three units of
measure to display your rate of ascent and descent.

Depth - You can choose from three units of measure
to display the depth of an area shown on a map.

To select Units Page options:

1. For all fields on this page, highlight the field and
then press the THUMB STICK to display the
Options Menu for the field.

2. Highlight the desired option on the menu and then
press the THUMB STICK to place it in the field.

Main Menu

Display Page

You can adjust the amount of time that the backlight-

ing feature stays on and adjust the screen contrast.

Backlighting Timeout - Choose from Stays On, to
delays of 15 seconds, 30 seconds, one, or two minutes
before timing out.

Contrast Adjustment - Can be adjusted from light
to dark using the slider adjacent to the contrast bar.

To set the backlighting timeout:

1. Highlight the Backlight Timeout field and then press
in on the THUMB STICK to display options.

2. Highlight the desired option and then press in on
the THUMB STICK to activate it.

To adjust the contrast:

1. Highlight the contrast slider and then press in on
the THUMB STICK to activate.

2. Move the
slider until the desired contrast has been set.

THUMB STICK up or down to move the

Heading Page

You can select the type of heading displays, the types

of North References, or enter the magnetic variation.

Display - Allows you to choose from Cardinal Let-

ters, Degrees or Mils.

North Reference - You can choose from True, Mag

­netic, Grid or User options. If ‘User’ is chosen, you must
correct for the Magnetic Variation.

To select either option:

1. Highlight the field and then press in on the
THUMB STICK to display the options.

2. Highlight the option and press in on the

THUMB STICK to activate.

Setup Options

Display Page

Backlight

Timeout
Options

Heading Page

Display

Options

North Reference

Options

45

Main Menu

Setup Options

GARMIN Mode

with No Options

GARMIN Differntial GPS Mode

with Data and Options Fields

46

Interface Page

The Interface Settings Page allows you to choose from
different input/output serial data formats. This feature is
used when connecting to external NMEA devices, a DGPS
beacon receiver, a personal computer, etc. Effective use of
this feature requires a working knowledge of these formats:

GARMIN - The proprietary format used to exchange
waypoint, track, and map data with a PC.

GARMIN DGPS - Allows DGPS input using a GARMIN
beacon receiver and a standard RTCM SC-104 and DGPS
tuning.

NMEA In/Out -

Supports the input and output of stan-

dard NMEA 0183 version 3.0 data.

Text Out - Allows ASCII text output of location and veloc­ity information without input capabilities.

RTCM In - Allows DGPS input using a standard
RTCM SC-104 format without output capabilities.

RTCM In/NMEA Out- Allows DGPS input using a
standard RTCM SC-104 format and supports the output of
standard NMEA 0183 version 3.0 data.

RTCM In/Text Out- Allows DGPS input using a standard
RTCM SC-104 format and simple ASCII text output of
location and velocity information.

None - Provides no interfacing capabilities.

If ‘GARMIN DGPS’ or ‘RTCM in/NMEA Out’ format
is selected, additional fields are provided to control a
GARMIN differential beacon receiver (e.g. GBR 21 &
GBR 23) directly from your unit. Tuning is automatic with
‘Scan’ or you can enter the beacon frequency and bit rate
when you select ‘User’ from the Beacon list to manually
tune the receiver. Refer to the beacon receiver instructions.

To select a serial data format:

1. Highlight the Serial Data Format field and then press
in on the THUMB STICK to display options.

2. Highlight an option and then press in on the
THUMB STICK to activate it.

Main Menu

System Page

The System Setup Page allows you to change:

GPS - Choose one of the four GPS options other than
‘Normal’ to significantly save battery power. The ‘Battery
Saver’ mode reduces the rate of satellite signal position
updating and the ‘Use With GPS Off’ option stops satellite
signal reception altogether. The ‘Demo Mode’ simulates
navigation.

WAAS - Switch between ‘Enabled’ and ‘Disabled’. See
page 5 for an explanation of WAAS capabilities.

Language - Change the display to any of 14 choices.

Battery - Change the type of battery used: Alkaline,

NiCad, NiMH, or Lithium, which improves the battery
gauge reliability.

Also shown on this page is the Amount of Memory
Used, Power Status, Time, Date, and Backlighting Status.

The ‘Memory Used’ figure refers to the non-volatile
memory within your unit and cannot be adjusted directly.
Saving a number of track logs and waypoints may affect
the percentage but normally will not cause any problems.

The ‘Power Status’ icon changes from a “battery” to
an “electric plug” when external power is connected. The
‘Backlight’ icon changes from a dark outline to a “bright”
outline when you press and release the POWER button.

The Option Menu allows you restore defaults or
display the current version of unit operating software and
the Unit I.D. Number.

To adjust System Page options:

Use the THUMB STICK to highlight the field

and then press in to display options. Then use the

THUMB STICK to select.

Setup Options

System Setup Page in Normal

Mode, WAAS Enabled,

Compass Off and Altimeter

Calibration on Automatic.

System Page Options Menu

47

Main Menu

Accessories

Accessory Menu

Sun & Moon Page

Overhead Moon Phase Stop

Animation Buttons

Location Options List

48

Accessories Menu

The accessory pages (features which enhance the unit
operation, but are not essential) include: sun and moon
position relative to a location, a calendar, a hunting and
fishing best times record, an area calculator, and a basic
calculator. Highlight the appropriate icon and then press
in on the THUMB STICK to display the desired acces­sory.

Sun and Moon

This feature provides you with a graphic display of
both sun and moon positioning for a certain date, time
and location with times for sunrise, sunset, moonrise, and
moonset.

On-screen buttons at the bottom of this page allow
you to animate the movement of the sun and moon and
stop it at a given date. The first button on the left ani

­mates the overhead display of the sun and moon and you
can view positions for any given date by observing the
date field and stopping movement when the desired date
is displayed. You can also display the different phases of
the moon by pressing the center button and then the far
right ‘stop button’ when the desired date appears.

To set the date and time:

1. For the Date and Current Time, highlight each field,
then press in on the THUMB STICK to begin data
entry of individual characters.

2. To display the current date and time, highlight
the page Options Menu and press in on the
THUMB STICK to display the ‘Use Current Time’
option and then press in on the THUMB STICK.

To set the location:

1. Highlight the Location field and then press the
THUMB STICK to display the ‘New Location’
options list.

2. Highlight the option desired and then press in
on the THUMB STICK to activate. If you choose
‘Current Location’ the field values displayed on
the page displays your location. If you choose ‘
Map’, a map page displays. Use the map pointer to
identify the desired location and then press in on
the THUMB STICK. If you choose ‘Use Find Menu’
follow instructions for using the Find Menu on page

Use

Main Menu

Calendar

This feature provides you with a monthly calendar
with programmable reference notes dates. You can display
one monthly calendar of days at a time and mark days on
each with reference notes using the data entry keypad.
You can create reference notes for multiple months and
for months in years yet to come. You can record 100
notes with up to 18 characters each.

To set the month and year:

1. For the month, highlight the month field and then
press in on the THUMB STICK to begin to enter
new data using the data entry keyboard.

2. For the year, highlight the year and then press in on
the THUMB STICK to begin entering the year using
the data entry keyboard.

Or...

Choose ‘Set To Current Date’ from the Options

Menu.

To create a reference note for a selected date:

1. Use the THUMB STICK to highlight the day of the
month and then press in to display the Options
Menu for the date.

2. Highlight and select ‘New Note’ to begin entering
text from the keyboard.

Observe the message as it is created in the message

block below the keyboard.

3. To edit or delete a note previously created, highlight
the date and press in on the THUMB STICK.
Options shown include ‘Edit Note’, ‘Delete Note’,
‘View Sun and Moon’, or ‘View Hunt and Fish’.

Accessories

Calendar Page

Calendar Page Options

Calendar Date Options

Calendar Page Keyboard and

Message Block

49

Main Menu

Accessories

Hunt & Fish Page

‘New Location’ Options

Hunt and Fish

This feature provides you with a listing of best
times for hunting and fishing for a chosen location
and date.

To set the date:

Highlight the date field and then press in on

the THUMB STICK to begin data entry of
individual characters. To display the current date,
highlight the page Options Menu and press
in on the THUMB STICK to display the ‘Use
Current Date’ option and then press in on the

THUMB STICK to activate.

To set the location:

1. Highlight the Location field and then press in on
the THUMB STICK to display the ‘New Loca­tion’ options list.

2. Highlight the option desired and then press in
on the THUMB STICK to activate. If you choose
‘Current Location’ the field values displayed on
the page reflects the times at your current loca­tion.

3. If you choose ‘Use Map’, a map page displays.
Use the map pointer to identify the desired loca­tion and then press in on the THUMB STICK.

If you choose ‘Use Find Menu’ follow instruc

tions for using the Find Menu on page 27.

-

50

NOTE: The times displayed are the recog­nized best and good times for hunting
and fishing. But, be certain that they are
not in conflict with state and local game
laws which may vary from location to
location. It is your responsibility to know
and abide by these laws.

Main Menu

Area Calculator

This feature provides you an area calculation as you
move about a location or view a saved track. The area
calculation displays in acres, hectares, and square feet,
square yards, square meters, square kilometers, and
square miles.

To calculate the area:

1. With the eTrex Legend “Ready to Navigate”, press
‘Start’ when you are ready to begin.

2. Begin walking or traveling the outskirts of the area
you want to measure. As soon as you change direc
tion, the eTrex Legend begins to display the area
traversed thus far.

3. Continue to the end point, then use the
THUMB STICK to stop the calculation.

4. Use the

THUMB STICK to store the area as a saved

track.

-

To review the area of a saved track:

On the Tracks page, highlight a Saved Track and

press in on the THUMB STICK to see a map with
the area shown in a data field at the bottom.

Calculator

This feature provides you with all the basic functions

of both of standard or scientific calculator. You can per

­form most calculations identified by the function symbols
along the sides of the keypad and can save the results
temporarily in the memory. The memory is cleared either
manually or when you turn off the eTrex Legend.

To change calculator options:

1. Highlight the page Options Menu and press in on
the THUMB STICK to display the ‘Scientific’ or the
‘Standard’ and ‘Radian/Degrees’ options.

2. Highlight the option you want to change and then
press in on the THUMB STICK for the change to
take effect.

3. Use the

THUMB STICK to move about the keypad,

enter numbers, and perform calculations.

Accessories

Area Calculator Start Page

Area Calculator Option

Standard calculator with

Scientific mode to select

51

Appendix A

Specifications

Physical

Case: Fully-gasketed, high-impact plastic alloy, waterproof to IPX7 stan-

Size: 4.4”H x 2”W x 1.2”D

Weight: Approx. 5.3 ounces (150 g) w/batteries

Temperature Range: 5° to 158°F (-15° to 70°C) (operating)

Performance

Receiver: Differential-ready, 12 parallel channel

Acquisition time: Approx. 15 seconds (warm start)

Update Rate: 1/second, continuous

GPS Accuracy: <15 meters (49 ft) RMS, 95% typical

DGPS (USGC) Accuracy: 3-5 meters (10-16 ft), 95% typical with DGPS corrections

DGPS (WAAS) Accuracy:

Velocity Accuracy: 0.05 meter/sec steady state

Dynamics: Performs to specifications to 6 g’s

Interfaces: NMEA 0183, RTCM 104 (for DGPS corrections) and

Antenna: Built-In patch

Power

Input: Two 1.5-volt AA batteries

Power Consumption: 0.5 watts max.

Battery Life: Up to 18 hours of typical use in ‘Battery Saver’ mode

dards (waterproof to one meter for 30 minutes)

Approx. 45 seconds (EZinit/cold start)
Approx. 5 minutes (First Time/AutoLocate™)

1

<3 meters (10 ft), 95% typical with DGPS corrections

RS-232 for PC interface

3

4

2

2

Specifications are subject to change without notice.

1

Subject to accuracy degradation to 100m 2DRMS under the U.S. DoD-imposed Selective Availability program.

2

With optional GARMIN Differential Beacon Receiver Input (such as GARMIN GBR 21 or 23).

3

The temperature rating for the eTrex Legend may exceed the usable range of some batteries. Alkaline batter-

ies can rupture at high temperatures. External power can only be applied using the GARMIN Auto Power
Adapter or PC Interface Cable with Auto Power Adapter. These cables contain a 12 Vdc to 3 Vdc voltage
regulator. Modifications or other applications voids the product warranty.

4

Alkaline batteries lose a significant amount of their capacity as temperature decreases. Use lithium batteries

when operating the eTrex Legend in below-freezing conditions. Extensive use of screen backlighting and the
electronic compass significantly reduces battery life. Different brands of batteries vary in performance.

52

Appendix B

To obtain accessories, see your local dealer or visit the
GARMIN web site at www.garmin.com and click on How
To Buy.

Automotive Mounting Bracket: Can be temporarily
or permanently mounted on the dash. (Shown at right)

Carry Lanyard: Provides convenient method for car
rying the eTrex Legend. Attaches to a slot on the bottom
of the unit. (Included)

Carrying Case: Protects the eTrex Legend and
permits use while in the case.

Carrying Holster: Allows easy access to the eTrex
Legend when clipped on a belt.

Cigarette Lighter Adapter: Provides eTrex Legend
power from an automobile cigarette lighter.

Data Cable: Wiring harness. Bare wire connections
for data input/output.

Handlebar Mounting Bracket: Allows the eTrex
Legend to be mounted on bicycle handle bars. (Shown at
right)

MapSource™

tool for creating waypoints and routes on your PC using
a background map and downloading them to your eTrex
Legend. See your GARMIN dealer for MapSource details.

Owner’s Manual or Quick Start Guide

PC Interface Cable: Allows for transfer of data from

a PC (RS-232 serial port connector) to an eTrex Legend.
(Included)

PC Interface Cable and Cigarette Lighter Power
Adapter: Allows transfer of waypoints and routes from a

PC to the eTrex Legend and provides unit power from an
automobile cigarette lighter. (Shown at right)

Replacement Battery Cover: Replacement for lost
or damaged battery compartment cover.

Map Data CD-ROMs: An excellent

(Included)

Legend Accessories

-

53

Appendix C

Data Field

Definitions

The following data field options are available on the Map, Navigation, and Trip

Computer Main Pages.

Bearing - The direction from your current location to a destination.

Course - The direction from your starting location to a destination.

Current Destination - The next waypoint on your route.

Current Distance - The remaining distance to your next waypoint.

Current ETA - The estimated time of day you will arrive at your next waypoint.

Current ETE - The estimated time needed to arrive at the next waypoint on your route.

Elevation - The altitude (height) above or below sea level.

Final Destination - The last waypoint on your route.

Final Distance - The remaining distance to your final destination.

Final ETA - The estimated time of day you will reach your final destination.

Final ETE - The estimated time needed to reach your final destination.

Heading - Your moving direction.

Location (lat/lon) - Your current GPS position.

Location (selected) - The lat/lon of point defined on map.

Maximum Speed - The maximum second-by-second speed recorded since last reset.

Moving Avg.

Odometer - A running tally of distance travelled, based upon the distance between

second-by-second position readings.

Off Course - The distance left or right you are from the original course (path of travel).

Overall Avg.

since last reset.

Pointer -

Speed - Your rate of travel can be displayed in miles per hour, kilometers per hour, or

nautical miles per hour.

Sunrise - The time at which the sun rises on this day.

Sunset - The time at which the sun sets on this day.

Time of Day - The time for the selected time zone.

Speed - Average speed while the unit is moving.

Speed - Average speed for unit for both moving and stopped speeds

Indicates the direction to the next destination.

54

Appendix C

Data Field

Definitions

To Course - The compass direction you must go in order to get back to the original

course.

Trip Odometer - A running tally of distance travelled since last reset.

Trip Time - Moving - Total time the unit has been moving since the last reset of the

trip timers.

Trip Time - Stopped -Total time the unit has been stopped since the last reset of the

trip timers.

Trip Time - Total -Total time the unit has been in operation since the last reset of the

trip timers.

Turn - The angle difference (in degrees) between the bearing to your destination and

your current line of travel. ‘L’ means turn Left. ‘R’ means turn Right.

Velocity Made Good - The speed at which you are closing on a destination along a

desired course.

Vertical Speed - Your rate of altitude gain/loss over time.

55

Appendix D

MapSource

Setup

Transferring MapSource Map Data

If you have purchased a GARMIN MapSource™
CD-ROM mapping program you may want to transfer
detailed map data before beginning use, to provide
your unit with maximum Find features and mapping
capability. The eTrex Legend accepts up to 8 MB of map

GARMIN MapSource

CD-ROM’s offer a variety of

detailed mapping data and

navigation information.

MapSource is also an exellent

medium for storage and safety

backup of Personal Waypoints,

Routes and Saved Tracks.

data from MetroGuide, Points of Interest, Fishing Hot
Spots, Topographic maps, Roads and Recreation, and
WorldMap mapping guides.

Map data transfer requires the use of a PC, a
GARMIN MapSource CD-ROM, and the PC Interface
Cable with RS-232 serial port connector supplied with
this unit. Follow detailed instructions for data transfer
in the MapSource User’s Manual.

See your GARMIN Dealer or
visit the GARMIN website at:

www.garmin.com

for information.

Transferring Map Data:

You can transfer detailed map data to the eTrex Legend from a GARMIN MapSource
CD-ROM. The eTrex Legend can accept up to 8 MB of data from any MapSource
program loaded on a PC and connected to the eTrex Legend Data Port. For this function
you need the eTrex PC Data Cable provided with your unit.

To transfer data:

1. Remove the Power/Data Port cover on the back of the unit by lifting up on the
protective cover on the back of the unit.

2. Connect the serial port connection on the cable to the PC serial port.

3. Connect the remaining cable connector to the back of the eTrex Legend by orienting
the slot on the connector with indexing bar on the back of the unit. Then, slide the
connector in place.

4. Turn on the eTrex Legend and follow instructions for map data transfer provided in
the MapSource User’s Manual.

56

Appendix E

To resolve problems that cannot be remedied using

this guide, contact GARMIN Customer Service at:

Troubleshooting

Guide

913-397-8200 or 800-800-1020

Symptom Probable Cause Remedy

Unit does not turn on.

Unit does not turn ON,

even with new batteries.

The unit turns On, then turns

Off.

It takes more than ten minutes

to get a location fix.

Cannot access a WAAS system

satellite after 2 to 5 minutes.

Cannot obtain a differential

position from WAAS.

Cannot access Point of Interest,

Street, or Intersection Find

Lists.

Batteries are exhausted.

Batteries may be installed backwards.

You are pressing and releasing the

button.

POWER

Batteries may be nearly exhausted.

The unit’s view of satellites is

obstructed.

Your view of the satellite is obstructed

or you are located too far from satellites

currently in service for the Americas.

System GPS operation is set to some-

thing other ‘Normal’ and/or interface

setting is for RTCM.

You have not collected enough infor-

mation from the WAAS satellite.

MetroGuide map data is not activated.

Move to a location with a clear view

Move to a location with a clear view

Wait 10-20 minutes for the initial col-

lection, then 1-2 minutes afterwards.

Access the Map Setup ‘Map’ option

Replace batteries.

Reinstall batteries.

You must press and hold the

button for two seconds.

POWER

Replace batteries.

of the sky.

and point the unit antenna in the

direction of the satellite.

Set system GPS to ‘Normal’ and

interface to other than RTCM.

and activate the check box.

Cannot view a track being laid

down on the map page when

traveling.

Cannot see the panning arrow

on the Map Page easily.

Cannot exit a menu or page

by moving the THUMB STICK

to the left.

The eTrex Legend is programmed to provide “pop-up” messages concerning operational characteristics and
conditions. Press in on the

The Track Log feature is turned Off.

There is too much map clutter or the

scale is such that map features are too

densely displayed.

Some menus and pages have an ‘X’

(Exit) on-screen button in the upper

THUMB STICK

right corner.

to acknowledge a message and return to the current feature.

Access the Tracks Page, highlight

the ‘ON’ button and press in on the

THUMB STICK.

Use the Map Page Setup Page to

reduce map clutter or change the

Highlight the on-screen button and
then press in on the THUMB

map scale.

STICK.

57

Appendix F

Wiring Diagram

Interface formats are selected from the Setup ‘Interface Page’ on page 46 of this
manual. The input/output lines on your eTrex Legend unit are RS-232 compatible,
allowing easy interface to a wide range of external devices, including PC’s, differential
beacon receivers, marine autopilots and /or a second GPS receiver.

The NMEA 0183 version 3.0 interface format is supported by the eTrex Legend and
enables the unit to drive up to three NMEA devices.

NMEA 0183 Version 3.0 Approved Sentences:

GPGGA, GPGLL, GPGSA, GPGSV, GPRMB, GPRMC, GPRTE, GPVTG, GPWPL,

GPBOD

GARMIN Proprietary Sentences:

PGRME (estimated error), PGRMM (datum string), PGRMZ (altitude), PSLIB

(beacon receiver control)

DGPS (Differential GPS) corrections are accepted in RTCM SC-104 version 2.0
format through the ‘Data In’ line. The GARMIN GBR 21 and GBR 23 are the recom­mended beacon receivers for use with the eTrex Legend. Other beacon receivers with
the correct RTCM format may be used, but may not correctly display status or allow
tuning control from the GPS unit.

The eTrex Legend may be hard-wired to a serial connector using the Data Cable (see
Appendix B for more information). Refer to the wiring diagram and the eTrex Legend
unit data connection illustrated below.

The PC Interface Cable provided with this unit allows you to connect your eTrex
Legend to a PC-compatible computer’s serial port.

58

Ground (-)

Data Out

Black

White

Data In

Green

Data Cable

eTrex Legend

Connector

Data In

Data Out

Ground (-)

Power (+)

Index

A

Accessories ................................................ 53

Accessories Menu ...................................... 48

Accessories Page ........................................ 23

Accuracy Circle .........................................

Activate a route ......................................... 34

Alignment Bar ............................................. 2

Amount of Memory Used ..........................

Area Calculator ..........................................

Arrow, Panning ..........................

Automotive Mounting Bracket ................... 53

Auto Zoom ................................................ 14

Average Speed ...............................

2, 10–12, 29

10

47
51

14, 18, 21

B

Backlight

Status 23, 47
Timeout

Battery

Compartment 2, 3
Cover 3
Installation 3
Level Indicator 22, 47

Type

Beacon Receiver Setup ......................... 46, 58

Bearing .............................. 13, 14, 18, 21, 54

Bearing Pointer .......................................... 17

Bent Pointer .............................................. 18

Big Compass .............................................. 17

Big Numbers ....................................... 17, 20

Buttons

About 2

CDI Scale 17

Find 12, 27, 30, 32

Goto 12, 34

Main Page Menu 4

Map 38

On screen

Page 4, 12, 15, 23–25, 34, 43

Power 3, 47

Zoom In/Out 3, 9, 10
Button Location

THUMB STICK 2

45

3, 47

20, 25, 26, 32

Find 2
Page 2
Power 2
Zoom In/Out 2

C

Calculator .................................................. 51

Calendar .................................................... 49

Cancel Goto .............................................. 34

Carrying Case ............................................

Carrying Holster ........................................ 53

Carry Lanyard & Slot ............................ 2, 53

Cautions ................................................ iii–iv

Cigarette Lighter Adapter ..........................

Cities, by name .......................................... 27

Cities, nearest ............................................ 27

Cleaning ...................................................... v

THUMB STICK ........................................... 2

Compass Ring ........................................... 17

Continue Acquiring ..................................... 7

Contrast

Adjustment 45

Set Up 3

Course ............................... 13, 14, 18, 21, 54

Course Deviation Indicator (CDI) .............. 17

Course Pointer .......................................... 17

Creating a Route ........................................ 35

Current Destination .................

Current Distance .....................

Current ETA ............................

Current ETE ............................ 13, 18, 21, 54

Current Location ....................................... 48

13, 18, 21, 54
13, 18, 21, 54
13, 18, 21, 54

53

53

D

D-ring ......................................................... 3

Data Cable ................................................. 53

Data entry ................................................... 2

Data Fields 10–11, 13, 16–20, 30, 34, 40, 46

Data Fields Definitions ..............................

Data options .............................................. 40

Date and Time

Setup 47

Status 47

Status Window

23

54

59

Index

Daylight Savings Time ............................... 43

Delete

Note 49

Waypoint

Demo Mode .............................................. 47

Depth ........................................................ 44

Destination .................................... 13, 18, 21

Detail, Map ................................................ 14

Differential GPS (DGPS) ............................

Display ...................................................... 45

Display Backlighting .................................... 3

Display Mode ............................................ 14

Display Page .............................................. 45

Distance .................................. 13, 18, 21, 44

Distance/Speed .......................................... 44

Distance to Point ....................................... 40

27

58

E

Edit

From the Route Map Page

Note 49

Route 36

Waypoint

Elevation ................................. 13, 18, 44, 54

Enable

Tracback 42

WAAS 5, 47

ETA ...............................................

ETA To Point .............................................

ETE ............................................... 13, 18, 21

ETE To Point ............................................. 40

Exits

Nearest

Services

External Power and Data Connector ............

26

27, 30

30

38

13, 18, 21

40

2

F

FCC Compliance Statement ........................ ii

Features .............................................

Fields, Data .....................................................

10–11, 13, 17–18, 20, 30–31, 34, 40, 54

Final Destination ..................... 13, 18, 21, 54

Final Distance ......................... 13, 18, 21, 54

1, 2, 23

Final ETA ................................

Final ETE ................................ 14, 18, 21, 54

Finding

32

Address
City 29
Exit 30
Favorite 29
Intersection 32
Point of Interest

Waypoint

FIND button ......................................... 2, 27

Find Menu .......................................... 23, 27

31

28

14, 18, 21, 54

G

GARMIN

DGPS 46

Limited Warranty vi, vii

Proprietary Sentences

Getting Started ............................................ 1

Glide Ratio ................................................ 21

Global Positioning System (GPS) .....................

3, 5, 47, 52, 58, iii
Goto

Cancelling (Stop Navigation) 11, 13, 34, 40

Functions 8, 12, 29, 34

Line 14

58

H

Handlebar Mounting Bracket ..................... 53

Heading .................................. 14, 18, 21, 54

Heading Page ............................................ 45

Hide Data Fields .................................. 11, 13

Hide Navigation Status ........................ 11, 13

How To

access the page Options Menu 20

activate a Goto 34

add a Find Menu item to a route 35

add a waypoint 38

adjust System Page options 47

adjust the contrast 45

calculate the area 51

change a route waypoint 37, 38

change calculator options 51

60

Index

How To (Continued)

change data fields 18
copy the route
create a reference note for a selected date
create a route
create a waypoint 24–25
delete a waypoint 27
delete the route
edit a waypoint 26
find an exit
find a city 30
find a Favorite 29
find a point of interest
find a waypoint
find details about a map item
find details about or Goto a map item 12
Goto a map item 12
hide Data Fields 13
hide Nav Status 13
hide or show Data Fields 13
insert a new waypoint on the route list 37
locate an address 32
locate an intersection 33
mark your current location as a waypoint
move a route waypoint
move a waypoint 25
navigate a route 39
program a data field
project a waypoint
remove all waypoints
restore default settings for the route 37
reverse the route 36
review a waypoint
review or remove a route waypoint
review the area of a saved track
save a Track Log 42
save Find Menu item as waypoints 27
save Map Menu item as waypoints 27
select a map page option 11
select a serial data format 46
select data field options 40
select Units Page options 44
Setup the Navigation Page 18

36

35

36

30

32

28

12

38

20

26

36–37

37

39

51

How To (Continued)

set the backlighting timeout 45
set the date and time 43, 48, 49, 50

49

set the location 48, 50
show Data Fields 13
show Nav Status 13
stop navigating 13, 34, 40
transfer data 56
use Setup Map options 15
use the Measure Distance option
use Track Log Setup options 42
view the next waypoint in the route 39

Hunt and Fish ........................................... 50

I

Installing

Batteries 3
Lanyard

2

Interface Page ............................................ 46

Internal Antenna .........................................

L

Land Cover ............................................... 15

Land or Water ...........................................

24

Language ................................................... 47

LCD Display ................................................ 2

Leg Course ................................................ 40

Leg Distance .............................................. 40

Leg Time ...................................................

Location (lat/lon) ....................................... 54

Location (marking) .................................... 24

Location (selected) .................................... 54

Lock on Road ............................................ 14

M

Maintenance ................................................ v

Main Menu Page .......................................... 4

Main Pages

Main Menu 22
Map 9
Navigation 16
Satellite 5
Trip Computer

Main Page Basics ......................................... 4

19, 20

15

2

14

40

61

Index

Main Page Menu Button .............................. 4

Maps

Features

15

MapSource CD-ROMs

Map Datum ............................................... 44

Map Page ....................................... 4, 8, 9, 10

Map Page, Main ......................................... 54

Map Page options ................................ 11–15

Map Scale .............................................. 9, 10

Marking

Location 12

Options 26

Waypoint

Maximum Speed ..................... 14, 18, 21, 54

Measure Distance ................................

Memory Used ............................................ 47

Modes

Demo 47

Normal 47

Moving Avg. Speed ............

Moving a Waypoint ............................. 25, 38

23, 24

15, 53, 56

11, 15

13, 14, 18, 21, 54

N

National Imagery and Mapping Agency ..... 44

Navigation

About 4, 8, 17

Data Fields 18

Main Page 16, 54

Options 18

Route 8, 39

Nearest (Waypoints, Cities, etc.) .......... 27–32

New Elevation ............................................. 6

New Location .............................................. 7

NMEA ........................................... 46, 52, 58

NMEA Out ................................................ 46

Normal Mode ............................................ 47

North Reference ........................................ 45

North Up .............................................. 6, 14

O

Odometer ................................ 14, 18, 21, 54

Off Course ............................... 13, 18, 21, 54

62

On-screen Button ............................................

11, 12, 14, 15, 20, 22, 25, 26, 28, 31, 32, 33,
35–38, 36, 39, 41, 42, 48, 57

Option Menus ............................................. 4

Option Menu Button ................................... 4

Orientation ................................................ 14

Overzoom ................................................. 10

P

PAGE button ............................................... 2

Page Setup ................................................. 14

Pan Map ........................................ 10, 11, 12

PC Interface Cable ..................................... 53

PC Interface Cable and Cigarette Lighter Power

Adapter ..................................................... 53

Performance .............................................. 52

Physical ..................................................... 52

Pointer .............................. 14, 18, 21, 40, 54

Points of Interest .......................................

Point of Interest categories .........................

Position Format ......................................... 44

Position Icon ............................................. 10

Power ........................................................ 52

Power/Data Connector Cover ...................... 2

POWER button ........................................... 2

Power Status .............................................. 47

Power Status Window ............................... 23

Precautions ............................................

Product Registration ..................................

Projecting a Waypoint ...............................

15
31

iii, iv

vii

26

R

Receiver Status .................................. 5–7, 47

Renaming a Waypoint .........................

Replacement Battery Cover ........................

Reset ......................................................... 20

Restart Search .............................................. 7

Restore Defaults .............................

Route

Adding Find Menu item 35
Creating 35
Definition of 8
Editing 36
Options 36–40

24–26

53

11, 17, 20

Index

Restore settings 36, 37
Route Page 23

Using 35

RTCM In ...................................................

RTCM In/NMEA Out .................................

RTCM In/Text Out ..................................... 46

46
46

S

Satellite Page ........................................... 4–7

Saved Tracks ..............................................

Saving the Track Log ........................... 41, 47

Selecting a Waypoint ................................. 28

Serial Number ........................................... vii

Setting the Correct Time Zone ...................

Setup and Features ......................................

Setup Map ........................................... 11, 14

Setup Map options .................................... 15

Setup Menu ............................................... 43

Setup Page ........................................... 22, 23

Setup the Navigation Page ......................... 18

Set course ............................................ 16–20

Show

Data Fields 11, 13

Navigation Status 13

Nav Status 11

Software License Agreement ....................... iv

Software Version (operating) ............... 23, 47

Specifications ............................................

Speed

Data Field 14, 18, 21, 54

Maximum 54

Moving Avg. 54

Overall Avg.

Units 44

Stop Navigation ............................. 11, 13, 17

Storage ........................................................ v

Street Label ............................................... 15

Sunrise .................................... 14, 18, 21, 54

Sunrise At Point ........................................ 40

Sunset ..................................... 14, 18, 21, 54

Sunset At Point .......................................... 40

Sun and Moon ........................................... 48

Symbol (Map) List ..................................... 24

54

14

22

1

52

System Page .............................................. 47

System Setup Page ..................................... 47

T

Text ........................................................... 15

Text Out .................................................... 46

Time

Format 43
Icon 22
Of Day 14, 18, 21, 54
Page 43
Status 47
Time, Date, and Backlighting Status

Time/Date

Time Zone .................................................

To Course ................................ 14, 18, 21, 55

TracBack .................................................... 41

Tracks

Definition of

Log 14

Options 14

Page 23

Track Up ...............................................

Transferring Map Data ...............................

Trip Computer ............................

Trip Odometer ......................... 14, 18, 21, 55

Trip Time

Moving 14, 18, 21, 55

Stopped 14, 18, 21, 55

Total

Troubleshooting ........................................ 57

Turn ........................................ 14, 18, 21, 55

Turning GPS Receiver “off” ..........................

47

8

14, 18, 21, 55

47

43

6, 14

56

4, 8, 19–21

6

U

Units of Measure ..................... 10, 23, 43, 44

Units Page ................................................. 44

Unit I.D. Number ...................................... 47

Use With GPS Off ....................................

Using

Find Menu 48

Goto 34

Main Menu 23

6, 7

63

Index

Map 48
Route 35
Track Log

41, 42

V

Velocity Made Good ................ 14, 18, 21, 55

Vertical Speed .................... 14, 18, 21, 44, 55

View

Hunt and Fish 49
Sun and Moon 49

View Waypoints on Route ............. 35, 37, 39

W

WAAS (Wide Area Augmentation System)

Warnings ...............................................

iii, iv

Warranty ...............................................

Water Immersion ......................................... v

Waypoints ...........................................

WGS84 (World Geodetic Survey 1984) .....

Wide Area Augmentation System (WAAS) .......

1, 47

Wiring Diagram ......................................... 58

www.GARMIN.com ...................................

www.nima.mil ...........................................

vi, vii

24–27

44

vii

44

Z

ZOOM IN ............................................. 9, 10

ZOOM IN button ........................................ 2

ZOOM OUT .......................................... 9, 10

ZOOM OUT button .................................... 2

64

For the latest free software updates throughout the life
of your GARMIN products, visit the GARMIN web site at

www.garmin.com.

© Copyright 2005 GARMIN Ltd. or its subsidiaries

Garmin International, Inc.

1200 East 151st Street

Olathe, KS 66062 U.S.A.

Telephone: [phone]

FAX: [phone]

Garmin (Europe) Ltd.

Unit 5, The Quadrangle, Abbey Park Industrial Estate

Romsey SO51 9DL, U.K.

Telephone: [phone]

FAX: [phone]

Garmin Corporation

No. 68, Jangshu 2nd Road
Shijr, Taipei County, Taiwan
Telephone: [phone]

FAX: [phone]

www.garmin.com

Part Number: 190-00234-00 Rev. D