Gamo LLCP Laser and Light with Scope Mount User Manual
62120LLCP
PRECISION LASER SIGHT AND LIGHT
INSTRUCTION MANUAL
TABLE OF CONTENTS
Complies with FDA performance standards for laser products except for
deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
LASER LIGHT-AVOID DIRECT EYE EXPOSURE
CLASS 3R LASER PRODUCT
630-670nm<5mW CW
CLASSIFIED PER IEC 60825-1, ED 2, 2007-03
LASER APERT URE
Model No: 62120LLCP
Serial No:
Mfgr Date:
GAMO OUTDOOR USA, Inc.
Ft. Lauderdale, FL USA
MADE IN CHINA
A.) MOUNTING THE LASER AND LIGHT TO A 1" SCOPE TUBE.
B.) REPLACING THE FLASHLIGHT BATTERIES.
C.) REPLACING THE LASER BATTERIES.
D.) REPLACING THE LASER OR FLASHLIGHT SWITCHES.
E.) POSITIONING THE REMOTE SWITCHES.
F.) ZEROING THE LASER SIGHT.
G) ADJUSTING THE LASER WINDAGE AND ELEVATION.
H.) MAINTAINING YOUR LASER SIGHT AND LIGHT.
PUSH BUTTON
ON/OFF SWITCHES
ALLEN
WRENCH
ELEVATION ADJUSTMENT SCREW
WINDAGE ADJUSTMENTS SCREW
(on the side of laser, not shown)
LASER SIGHT
FLASHLIGHT
MOMENTARY
ON/OFF SWITCHES
2
COMPONENTS OF THE KIT
DANGER
!
WARNING
!
DANGER
!
WARNING
!
DANGER
!
WARNING
!
DANGER
!
WARNING
!
DANGER
!
WARNING
!
CAUTION
!
Triple Mount
Flashlight
Laser sight
1 Push button and 1 remote switch for flashlight
1 Push button and 1 remote switch for laser sight
1 CR123A 3V battery for flashlight
3 LR44 1.5V batteries for laser sight
2 Velcro stickers
3 “L” hex wrench set
BE CERTAIN THAT YOUR AIR GUN IS UNLOADED AND POINTING
IN A SAFE DIRECTION.
ATTENTION: THIS LASER TARGET DESIGNATOR IS A POWERFUL DEVICETHAT REQUIRES
SPECIAL ATTENTION FOR ITS USE. READ THE FOLLOWING INSTRUCTIONS AND SAFETY
PRECAUTIONS CAREFULLY BEFORE USE.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURE OTHER THAN SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
LASER LIGHT - AVOID DIRECT EYE EXPOSURE.
KEEP OUT OF REACH OF CHILDREN.
SURFACES, OR ANY OTHER OBJECT NOT INTENDED FOR DESIGNATED USE.
A.) MOUNTING THE LASER AND LIGHT TO A 1” SCOPE TUBE
1. Attach lower half of 1” mounts to rifle scope tube.
2. Attach upper half of mounts. DO NOT TIGHTEN SCREWS YET.
3. Place laser sight and flashlight onto “W” shaped lower part of mount.
DO NOT DIRECT LASER AT PEOPLE, PETS, SHINY/HIGHLY REFLECTIVE
3
Loading...