GAI-Tronics TDN9413A User Manual

Pub. 43003-040A
GAI-TRONICS® CORPORATION
A HUBBELL COMPANY
Model TDN9413A
Stat-Alert Signaling Module Kit
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics retains all intellectual property and other rights in or to the information contained herein, and such information may only be used in connection with the operation of your GAI-Tronics product or system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third party.
General Information
The Model TDN9413A Stat-Alert Signaling Module Kit is intended for upgrading existing dispatch consoles manufactured by GAI-Tronics or for replacement of existing Stat-Alert modules. This kit includes the following components:
Qty Description
1 MDC-1200 Interface Module 1 Module mounting bracket
1 lot Hardware and labels
Installation
Desktop Console
1. Disconnect power from the Desktop Console and remove all attached cables from the rear cover.
2. Remove the four screws securing the rear panel. Gently pull the rear cover from the housing and
disconnect the ribbon cables (SLV-CBL-P) attached to the surge suppression PCBA. Lay the rear panel flat. See Figure 1.
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374  800-492-1212  Fax: 610-796-5954
VISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS
Pub. 43003-040A
Model TDN9413A Stat-Alert Signaling Module Kit Page: 2 of 3
Figure 1.
3. Remove the seven screws securing the top panel and gently lift the cover exposing the attached
speaker cable and master display cable. See Figure 2.
Figure 2.
4. Disconnect the speaker cable at the male-to-female connection point. Unplug the master display
cable from the top cover.
\\s_eng\gtcproddocs\radio products-current release\43003\43003-040a\43003-040a.doc 05/05
Loading...
+ 1 hidden pages