Gaggenau VK414-110 Specifications Sheet

Color Variants
VK414110

Stainless steel
Width 38 cm

Included accessories

2 x cooking insert.
1 x glass cover.
1 x hand grip.
1 x residuary filter.
1 x water drain valve.

Characteristics
Product name/family

Vario/Domino steam cooker

Built-in / Free-standing

Built-in

Energy input

Electric

Type of control

Electronic

Type of control setting and signalling
devices

Cylindrical controls

Required niche size for installation
(HxWxD)

290 x 360 x 490

Width of the product (mm)

380

Dimensions of the product (mm)

290 x 380 x 520

Net weight (kg)

14.0

Gross weight (kg)

17.0

Power on indicator

Yes

Location of control panel
Type of regulation

Stepless energy regulated

Basic surface material

Stainless steel

Color of surface

Stainless steel, Stainless steel

Color of frame

Stainless steel

Approval certificates

CE, ROSTEST, VDE

Length electrical supply cord (cm)

Consumption and connection features
Electrical connection rating (W)

2000

Current (A)

10

Voltage (V)

220-240

Frequency (Hz)

60; 50

2017-03-29
Page 1

VK414110
Vario steamer 400 series

Stainless steel
Width 38 cm

Steaming in cooktop size
Exact water temperature control from
45 °C to 95 °C
Cooking on two levels, without
flavour transfer
Solid stainless steel control knob
Precision crafting of 3 mm stainless
steel
For surface mounting with a visible
edge or for flush mounting
Can be combined perfectly with other
Vario appliances of the 400 series

Cooking zones

Water capacity 1 to 6 litres.

Handling

Control knobs with illuminated ring,
temperature markings and outlet water.
Electronic water temperature control
from 45 °C to 95 °C, in 5 °C steps.

Features

Steam cooking level with electronic
steam control for pressureless cooking.
Automatic boiling point detection.
Motor-driven 1/2” water drain valve.

Safety

Safety shut-off.

Planning notes

Depending on the type of installation
(surface-mounted or flush-mounted,
with or without an appliance cover), the
specific location of the cut-out and the
knob positions may vary.
If installing with the appliance cover
VA 440 or filler strip VA 450 take into
account the additional space required
for the depth.
If combining several appliances with
at least one appliance cover, the filler
strip VA 450 is required to compensate
for the depth of the appliance without
the appliance cover.
If combining several Vario appliances
of the 400 series, a connection strip
VA 420 must be placed between the
appliances. Depending on the type
of installation, the corresponding
connection strip must be provided.
In the cut-out, the installation system
requires the side edge to be at least 10
mm for surface mounting and at least
13 mm for flush mounting. Ensure a
continuous cut surface of 90°.
The bearing capacity and stability, in
the case of thin worktops in particular,
must be supported using suitable
substructures. Take into account the
appliance weight and additional loads.
Additional instructions for flush
mounting:
Installation is possible in worktops
made of stone, synthetics or solid
wood. Heat resistance and watertight
sealing of the cut edges must
be observed. Concerning other
materials please consult the worktop
manufacturer.
The groove must be continuous and
even, so that uniform placing of the
appliance on the gasket is ensured. Do
not use discontinuous lining.
The joint width may vary due to size
tolerances of the combinations and of
the worktop cut-out.
If installing several appliances in
individual cut-outs allow for a division
bar of minimum 50 mm between the
individual cut-outs.

Built-in control panel to be integrated in
the bottom cabinet at drawer level.
Panel thickness 16 – 26 mm.
The drawing "Installation of the control
knob" must be observed if the panel is
more than 26 mm thick (there must be
a recess at the rear).
Seal the worktop cutout.
VK 414 and VF 414 must not be
installed directly next to each other.
A minimum lateral clearance of at least
40 mm from adjacent heat-sensitive
furniture.
In case of suspended cabinets a
ventilation hood must be installed
above the steamer.
If a cover is fitted, the glass lid must be
removed when closing it.
Appliance can be snapped into the
worktop from above.
Appliance weight: approx. 14 kg.

Connection

Total connected load 2.0 kW.
Plan a connection cable.

VK414110
Vario steamer 400 series

Stainless steel
Width 38 cm

2017-03-29
Page 2