Color Variants
VI422111
Stainless steel frame
Width 38 cm
Installation Accessories
VA450401
Stainless steel filler strip 38 cm
Characteristics
Product name/family
Vario/Domino cooking zone cera
Built-in / Free-standing
CONSTR_TYPE.Built-in
Energy input
Electric
Total number of positions that can be
used at the same time
2
Required niche size for installation
(HxWxD)
55 x 360 x 490-500
Width of the product (mm)
380
Dimensions of the product (mm)
55 x 380 x 520
Dimensions of the packed product
(HxWxD) (mm)
120 x 580 x 600
Net weight (kg)
10.0
Gross weight (kg)
11.0
Residual heat indicator
Separate
Location of control panel
External control
Basic surface material
Ceramic
Color of surface
Black, Stainless steel
Color of frame
Stainless steel
Approval certificates
AENOR, CE
Length electrical supply cord (cm)
150
Consumption and connection features
Electrical connection rating (W)
3700
Gas connection rating (W)
Current (A)
16
Voltage (V)
220-240
Frequency (Hz)
50; 60
2018-03-29
Page 1
VI422111
Vario flex induction cooktop 400 series
Stainless steel frame
Width 38 cm
Flex function for combining the
rectangular cooking areas
Free positioning of cookware inside
combined cooking areas
Frying sensor function for
temperature control in pans
Easy control of all functions with
bicoloured display
Solid stainless steel control knob
Precision crafting of 3 mm stainless
steel
For surface mounting with a visible
edge or for flush mounting
Can be combined perfectly with other
Vario appliances of the 400 series
Cooking zones
2 flex induction cooking areas 19x24
cm (2200 W, with booster 3700 W),
linked together 38x24 cm (3300 W, with
booster 3700 W).
Handling
Control knobs with illuminated
ring, cooking zone and output level
markings.
Electronic power control in 12 output
levels.
User friendly control with bicoloured
display (white / orange).
Features
Flex function for rectangular cooking
areas.
Frying sensor function.
Booster function.
Stopwatch.
Short-term timer.
Options menu.
Safety
Individual residual heat indicators.
Safety shut-off.
Planning notes
Depending on the type of installation
(surface-mounted or flush-mounted),
the specific location of the cut-out and
the knob positions may vary.
The horizontal positioning of the
knobs may be aligned with the specific
cooking areas.
The drawing "Installation of the control
knob" must be observed if the panel is
more than 23 mm thick (there must be
a recess at the rear).
If installing filler strip VA 450 take into
account the additional space required
for the depth.
If combining several appliances with
at least one appliance cover, the filler
strip VA 450 is required to compensate
for the depth of the appliance without
the appliance cover.
If combining several Vario appliances
of the 400 series, a connection strip
VA 420 must be placed between the
appliances. Depending on the type
of installation, the corresponding
connection strip must be provided.
In the cut-out, the installation system
requires the side edge to be at least 10
mm for surface mounting and at least
13 mm for flush mounting. Ensure a
continuous cut surface of 90°.
The bearing capacity and stability, in
the case of thin worktops in particular,
must be supported using suitable
substructures. Take into account the
appliance weight and additional loads.
Additional instructions for flush
mounting:
Installation is possible in worktops
made of stone, synthetics or solid
wood. Heat resistance and watertight
sealing of the cut edges must
be observed. Concerning other
materials please consult the worktop
manufacturer.
The groove must be continuous and
even, so that uniform placing of the
appliance on the gasket is ensured. Do
not use discontinuous lining.
The joint width may vary due to size
tolerances of the combinations and of
the worktop cut-out.
If installing several appliances in
individual cut-outs allow for a division
bar of minimum 50 mm between the
individual cut-outs.
Operates with magnetic (induction)
iron pots and pans only. For an optimal
heat distribution, the use of sandwich
bottom cookware is recommended.
Appliance can be snapped into the
worktop from above.
Appliance weight: approx. 10 kg.
Connection
Total connected load 3.7 kW.
Connecting cable 1.5 m without plug.
VI422111
Vario flex induction cooktop 400 series
Stainless steel frame
Width 38 cm
2018-03-29
Page 2