Color Variants
VG415211
Stainless steel
Width 38 cm
Included accessories
1 x WOK attachment ring.
Optional accessories
WP400001
Wok pan made of multiple-layer
material
Installation Accessories
VA420000
Connection strip for combination with
other Vario appliances of the 400 series
for flush installation
VA420001
Connection strip for combination with
other Vario appliances of the 400 series
for flush installation with appliance
cover/adjustment strip
VA420010
Connection strip for combination with
other Vario appliances of the 400 series
for surface installation
VA420011
Connection strip for combination with
other Vario appliances of the 400 series
for surface installation with appliance
cover/adjustment strip
VA440010
Stainless steel appliance cover with
mounting strip
VA450400
Stainless steel adjustment strip 38 cm
Characteristics
Product name/family
Vario/Domino gas hob
Built-in / Free-standing
CONSTR_TYPE.Built-in
Energy input
Gas
Total number of positions that can be
used at the same time
1
Required niche size for installation
(HxWxD)
131 x 360 x 492
Width of the product (mm)
380
Dimensions of the product (mm)
131 x 380 x 520
Dimensions of the packed product
(HxWxD) (mm)
300 x 500 x 610
Net weight (kg)
15.0
Gross weight (kg)
17.0
Residual heat indicator
Separate
Location of control panel
External control
Basic surface material
brushed stainless steel
Color of surface
Stainless steel, Stainless steel
Color of frame
Stainless steel, Stainless steel
Approval certificates
CE, Eurasian, Ukraine, VDE
Length of electrical supply cord (cm)
140
EAN code
4242006261276
Consumption and connection features
Electrical connection rating (W)
15
Gas connection rating (W)
6000
Current (A)
2
Voltage (V)
220-240
Frequency (Hz)
60; 50
created on 2018-02-21
Page 1
VG415211
Vario gas wok 400 series
Stainless steel
Width 38 cm
Natural gas 20 mbar
Wok burner with 6 KW
Multi-ring burner with 6 KW
Full electronic power level regulation
on 12 levels
Precise and reproducible flame size
Automatic fast ignition, electronic
flame monitoring with automatic reignition
Simmer function for cooking on a
very low output level
Solid stainless steel control knob
Precision crafting of 3 mm stainless
steel
For surface installation with a visible
edge or for flush installation
Can be combined perfectly with other
Vario appliances of the 400 series
Cooking zones
1 multi-ring wok burner (300 W – 6000
W), suitable for pots up to max. ø 32
cm.
Handling
Control knobs with illuminated
ring, cooking zone and output level
markings.
One-handed operation.
Full electronic control in 12 output
levels for exact power level adjustment
plus simmer function.
Automatic fast ignition.
Features
Simmer function.
Cast pan support with flat, continuous
pot surface.
Brass burner rings.
Safety
Electronic flame monitoring with
automatic re-ignition.
Residual heat indication.
Safety shut-off.
Planning notes
Depending on the type of installation
(surface-mounted or flush-mounted,
with or without an appliance cover), the
specific location of the cut-out and the
knob positions may vary.
The drawing "Installation of the control
knob" must be observed if the panel is
more than 23 mm thick (there must be
a recess at the rear).
If installing with the appliance cover
VA 440 or adjustement strip VA 450
take into account the additional space
required for the depth.
If combining several appliances with
at least one appliance cover, the
adjustment strip VA 450 is required
to compensate for the depth of the
appliance without the appliance cover.
If combining several Vario appliances
of the 400 series, a connection strip
VA 420 must be placed between the
appliances. Depending on the type
of installation, the corresponding
connection strip must be provided.
In the cut-out, the installation system
requires the side edge to be at least 10
mm for surface installation and at least
13 mm for flush installation. Ensure a
continuous cut surface of 90°.
The bearing capacity and stability, in
the case of thin worktops in particular,
must be supported using suitable
substructures. Take into account the
appliance weight and additional loads.
Additional instructions for flush
installation:
Installation is possible in worktops
made of stone, synthetics or solid
wood. Heat resistance and watertight
sealing of the cut edges must
be observed. Concerning other
materials please consult the worktop
manufacturer.
The groove must be continuous and
even, so that uniform placing of the
appliance on the gasket is ensured. Do
not use discontinuous lining.
The joint width may vary due to size
tolerances of the combinations and of
the worktop cut-out.
If installing several appliances in
individual cut-outs allow for a division
bar of minimum 50 mm between the
individual cut-outs.
Special nozzles can be ordered as
spare parts.
Plan for an electrical connection (the
appliance is not operable without
power supply).
Air intake from above.
No intermediate shelf required.
Rear panel and wall trims must be
heat-resistant and consist of a nonflammable material.
A minimum clearance of at least 150
mm from adjacent heat-sensitive
furniture or contact surfaces must be
observed or thermal insulation fitted.
If operated next to the downdraft
ventilation VL 414, the air baffle AA 414
is recommended to ensure maximum
performance of the cooktop.
With a total connected load of
more than 12 kW local regulations
concerning room ventilation, room
size and combination of extraction or
recirculation hoods must be observed.
Minimum clearance between gas
cooktop(s) with more than 12 kW and
ventilation hood 70 cm.
Appliance can be snapped into the
worktop from above.
Appliance weight: approx. 15 kg.
Connection
Total connected load gas 6.0 kW.
Total connected load electric 15.0 W.
Connecting cable 1.4 m with plug.
VG415211
Vario gas wok 400 series
Stainless steel
Width 38 cm
Natural gas 20 mbar
Wok burner with 6 KW
created on 2018-02-21
Page 2