Fujitsu M10/SPARC M10, M10, SPARC M10, SPARC M10-1 Installation Manual

Download

Page 1

Fujitsu M10/SPARC M10 Systems

PCI Card Installation Guide

Manual Code: C120-E710-04EN July 2014

Page 2

and/or its affiliates provided technical input and review on portions of this material.

Oracle

and/or its affiliates and Fujitsu Limited each own or control intellectual property rights relating to products and technology described in this document, and such products,

technology and this document are protected by copyright laws, patents, and other intellectual property laws and international treaties.

document and the product and technology to which it pertains are distributed under licenses restricting their use, copying, distribution, and decompilation. No part of such

This product or technology, or of this document, may be reproduced in any form by any means without prior written authorization of Oracle and/or its affiliates and Fujitsu Limited, and their applicable licensors, if any. The furnishings of this document to you does not give you any rights or licenses, express or implied, with respect to the product or technology to which it pertains, and this document does not contain or represent any commitment of any kind on the part of Oracle or Fujitsu Limited or any affiliate of either of them.

document and the product and technology described in this document may incorporate third-party intellectual property copyrighted by and/or licensed from the suppliers to

This Oracle and/or its affiliates and Fujitsu Limited, including software and font technology.

the terms of the GPL or LGPL, a copy of the source code governed by the GPL or LGPL, as applicable, is available upon request by the End User. Please contact Oracle and/or its

Per affiliates or Fujitsu Limited. This distribution may include materials developed by third parties. Parts of the product may be derived from Berkeley BSD systems, licensed from the University of California.

registered trademark of The Open Group.

UNIX

is a

Oracle

and Java are registered trademarks of Oracle and/or its affiliates.

Fujitsu

and the Fujitsu logo are registered trademarks of Fujitsu Limited.

SPARC

Enterprise, SPARC64, SPARC64 logo and all SPARC trademarks are trademarks or registered trademarks of SPARC International, Inc. in the United States and other

countries and used under license.

names may be trademarks of their respective owners.

Other If

this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable:

U.S.

GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered

U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such,

FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. Unless otherwise expressly set forth in such agreement, to the extent allowed by applicable law, in no event shall Oracle or Fujitsu Limited, and/or any of their affiliates have any liability to any third party under any legal theory for any loss of revenues or profits, loss of use or data, or business interruptions, or for any indirect, special, incidental or consequential damages, even if advised of the possibility of such damages. DOCUMENTATION WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID.

Copyright Oracle Oracle même, ces produits, technologies et ce document sont protégés par des lois sur le droit d’auteur, des brevets, et d'autres lois sur la propriété intellectuelle et des traités internationaux. Ce Aucune partie de ce produit, de ces technologies ou de ce document ne peut être reproduite sous quelque forme que ce soit, par quelque moyen que ce soit, sans l'autorisation écrite préalable d'Oracle et/ou ses affiliés et de Fujitsu Limited, et de leurs éventuels concédan ts de licence. Ce document, bien qu'il vous ait été fourni, ne vous confère aucun droit et aucune licence, exprès ou tacites, concernant le produit ou la technologie auxquels il se rapporte. Par ailleurs, il ne contient ni ne représente aucun engagement, de quelque type que

Ce licence par des fournisseurs à Oracle et/ou ses sociétés affiliées et Fujitsu Limited, y compris des logiciels et des technologies relatives aux polices de caractère s. Conformément Veuillez contacter Oracle et/ou ses affiliés ou Fujitsu Limited. Cette distribution peut comprendre des composants développés par des parties tierces. Des parties de ce produit pourront être dérivées des systèmes Berkeley BSD licenciés par l'Université de Californie. UNIX Oracle Fujitsu SPARC dans d'autres pays. Tout Si compte du Gouvernement des Etats-Unis, la notice suivante s'applique : U.S.

use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government. Avis produit ou toute technologie décrits dans les présentes correspondent aux garanties expressément stipulées dans le contrat de licence régissant le produit ou la technologie fournis. SAUF ENTITE DECLINENT TOUT ENGAGEMENT OU GARANTIE, QUELLE QU'EN SOIT LA NATURE (EXPRESSE OU IMPLICITE) CONCERNANT CE PRODUIT, CETTE TECHNOLOGIE OU CE DOCUMENT, LESQUELS SONT FOURNIS EN L'ETAT. EN OUTRE, TOUTES LES CONDITIONS, DECLARATIONS ET GARANTIES EXPRESSES OU TACITES, Y COMPRIS NOTAMMENT TOUTE GARANTIE IMPLICITE RELATIVE A LA QUALITE MARCHANDE, A L'APTITUDE A UNE UTILISATION PARTICULIERE OU A L'ABSENCE DE CONTREFACON, SONT EXCLUES, DANS LA MESURE AUTORISEE PAR LA LOI APPLICABLE. Sauf mention contraire expressément stipulée dans ce contrat, dans la mesure autorisée par la loi applicable, en aucun cas Oracle ou Fujitsu Limited et/ou l'une ou l'autre de leurs sociétés affiliées ne sauraient être tenues responsables envers une quelconque partie tierce, sous quelque théorie juridique que ce soit, de tout manque à gagner ou de perte de profit, de problèmes d'utilisation ou de perte de données, ou d'interruptions d'activités, ou de tout dommage indirect, spécial, secondaire ou consécutif, même si ces entités ont été préalablement informées d'une telle éventualité. LA EXCLUE, DANS LA MESURE AUTORISEE PAR LA LOI EN VIGUEUR, Y COMPRIS NOTAMMENT TOUTE GARANTIE IMPLICITE RELATIVE A LA QUALITE MARCHANDE,

The only warranties granted by Oracle and Fujitsu Limited, and/or any affiliate in connection with this document or any product or technology described herein are those

EXPRESSLY SET FORTH IN SUCH AGREEMENT, ORACLE OR FUJITSU LIMITED, AND/OR THEIR AFFILIATES MAKE NO REPRESENTATIONS OR WARRANTIE

ANY KIND (EXPRESS OR IMPLIED) REGARDING SUCH PRODUCT OR TECHNOLOGY OR THIS DOCUMENT, WHICH ARE ALL PROVIDED AS IS, AND ALL EXPRESS

IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS

PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED

et/ou ses affiliés ont fourni et vérifié des données techniques de certaines parties de ce composant. et/ou ses affiliés et Fujitsu Limited détiennent et contrôlent chacun des droits de propriété intellectuelle relatifs aux produits et technologies décrits dans ce document. De

document, le produit et les technologies afférents sont exclusivement distribués avec des licences qui en restreignent l'utilisation, la copie, la distribution et la décompilation.

soit, de la part d'Oracle ou de Fujitsu Limited, ou des sociétés affiliées de l'une ou l'autre entité.

document, ainsi que les produits et technologies qu'il décrit, peuvent inclure des droits de propriété intellectuelle de parties tierces protégés par le droit d’auteur et/ou cédés sous

aux conditions de la licence GPL ou LGPL, une copie du code source régi par la licence GPL ou LGPL, selon le cas, est disponible sur demande par l'Utilisateur Final.

est une marque déposée de The OpenGroup.

Java sont des marques déposées d'Oracle Corporation et/ou de ses affiliés.

logo Fujitsu sont des marques déposées de Fujitsu Limited.

et le

Enterprise, SPARC64, le logo SPARC64 et toutes les marques SPARC sont utilisées sous licence et sont des marques déposées de SPARC International, Inc., aux Etats-Unis et

autre nom mentionné peut correspondre à des marques appartenant à leurs propriétaires respectifs.

logiciel, ou la documentation qui l'accompagne, est concédé sous licence au Gouvernement des Etats-Unis, ou à toute entité qui délivre la licence de ce logiciel ou l'utilise pour le

GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered

U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such,

non-responsabilité : les seules garanties octroyées par Oracle et Fujitsu Limited et/ou toute société affiliée de l'une ou l'autre entité en rapport avec ce document ou tout

MENTION CONTRAIRE EXPRESSEMENT STIPULEE AU DIT CONTRAT, ORACLE OU FUJITSU LIMITED ET/OU LES SOCIETES AFFILIEES A L'UNE OU L'AUTRE

DOCUMENTATIO N EST FOURNIE "EN L'ETAT" ET TOUTE AUTRE CONDITION, DECLARATION ET GARANTIE, EXPRESSE OU TACITE, EST FORMELLEMENT

L'APTITUDE A UNE UTILISATION PARTICULIERE OU A L'ABSENCE DE CONTREFACON.

Page 3

Preface v

Chapter 1　PCI Card Mounting Rules for the SPARC M10-1　1

1.1 Prerequisites　1

1.1.1　Domain OS　1

1.1.2　System firmware XCP version　2

1.2　Maximum Number of Each Type of Mounted PCI Card and Available

PCI Slots　2

1.2.1　If XCP2050 or later is used and Oracle Solaris 11 is installed on

all the domain

1.2.2　If XCP2050 or later is used and Oracle Solaris 10 is installed on

all the domains or if XCP2050 or later is used and Oracle Solaris

and Oracle Solaris 10 are mixed　6

s　3

1.2.3　XCP2044 or earlier　12

1.3　Hardware Configuration Diagram　17

Chapter 2　PCI Card Mounting Ru

2.1　Prerequisites　19

2.1.1　Domain OS　19

2.1.2　System firmware XCP version　20

2.1.3　Number of CPUs and number of root complexes　20

2.2　Maximum Number of Each Type of Mounted PCI Card and Available

PCI Slots　21

les for the SPARC M10-4　19

iii

Page 4

2.2.1　If XCP2050 or later is used and Oracle Solaris 11 is installed on

all the domains　22

2.2.2　If XCP2050 or later is used and Oracle Solaris 10 is installed on

all the domains or if XCP2050 or later is used and Oracle Solaris

and Oracle Solaris 10 are mixed　26

2.3　XCP2044 or earlier　34

2.3　Relationship between the CPU Configuration and the Number of Root

Complexes　42

Chapter 3　PCI Card Mounting Rules for the SPARC M10-4S　47

3.1　Prerequisites　47

3.1.1　Domain OS　47

3.1.2　System firmware XCP version　48

3.1.3　Number of CPUs and number of root complexes　48

3.2　Ma

ximum Number of Each Type of Mounted PCI Card and Available

PCI Slots　49

3.2.1　If XCP2050 or later is used and Oracle Solaris 11 is installed on

all the domains　50

3.2.2　If XCP2050 or later is used and Oracle Solaris 10 is installed on

all the domains or if XCP2050 or la

and Oracle Solaris 10 are mixed　54

ter is used and Oracle Solaris

3.2.3　XCP2044 or earlier　62

3.3　Relationship between the CPU Configuration and the Number of Root

Complexes　70

Chapter 4　Factory-default Mounting Order of PCI Cards　75

Appendix A　Cards that Support PCI Hot Plug and Dynamic Reco

nfiguration

Appendix B　Cards that Support SR-IOV　89

Appendix C　Cards that Support Direct I/O　93

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 2014iv

Page 5

Preface

This document describes the rules for mounting PCI cards that are mounted in the SPARC M10 systems from Oracle or Fujitsu.

Fujitsu M10 is sold as SPARC M10 Systems by Fujitsu in Japan. Fujitsu M10 and SPARC M10 Systems are identical products.

This preface includes the following sections:

■

Audience

■

Text Conventions

This document uses the following fonts and symbols to express specific types of information.

Font/Symbol Meaning Example

aBbCc123

AaBbCc123

Italic Indicates the names of reference manuals. See the SPARC M10 Systems

" " Indicates the names of chapters, sections, items,

Indicates what you enter, in contrast to what is displayed on the screen. This font is used to indicate an example of command input.

Indicates the names of commands, files, and directories displayed in computer output and on the screen. This font is used to indicate an example of command in

buttons, and menus.

put within the relevant framework.

XSCF>

XSCF> UserName: Privileges:



Installation Guide.

See "Chapter 2 Network Connection."

Command syntax in the text

adduser jsmith

showuser-P







jsmith useradm auditadm

Though the XSCF commands have a section number of (8) or (1), it is omitted in the text. The Oracle Solaris commands have a section number such as (1M) in the text. Each command has a section number in the command name when prompting users

refer to it.

Safety Precautions

Read the following documents thoroughly before using or handling any SPARC M10 system:

■

Fujitsu M10/SPARC M10 Systems Important Legal and Safety Information

■

Fujitsu M10/SPARC M10 Systems Safety and Compliance Guide

Preface vii

Page 8

Syntax of the Command-Line Interface (CLI)

The command syntax is as follows.

■

A variable that requires input of a value is in italics.

■

An optional element is enclosed in [ ].

■

A group of options for an optional keyword is enclosed in [ ] and delimited by |.

Document Feedback

If you have any comments or requests regarding this document, please contact us from the following URL with the relevant manual number, manual title, and pages

along with specific details:

■

Japanese site

http://jp.fujitsu.com/platform/server/sparc/manual/

■

Global site

http://www.fujitsu.com/global/services/computing/server/sparc/do w nl oa ds/m a nu a l/

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 2014viii

Page 9

Chapter 1

PCI Card Mounting Rules for the SPARC M10-1

This chapter describes the maximum number of each type of mounted PCI card and the rules for mounting PCI cards in PCI slots when mounting PCI cards in the SPARC M10-1. Be sure to observe these mounting rules when designing the system and when installing a PCI card or changing the mounting location of a PCI card

■

Prerequisites

Maximum Number of Each Type of Mounted PCI Card and Available PCI Slots

Hardware Configuration Diagram

1.1 Prerequisites

■

Domain OS

■

System firmware XCP version

1.1.1 Domain OS

The maximum number of each type of mounted PCI card and the available PCI slots may vary depending on the version of the Oracle Solaris that is installed on the domain. Mounting rules vary depending on whether all OS versions of the control domain,

I/O root domain, and I/O domain are Oracle So

mixture of the two. If an Oracle Solaris 10 environment is used in the following configurations, apply the rules for Oracle Solaris 11.

■

A guest domain of an Oracle Solaris 10 environment is configured using the virtual I/O services of a control domain or the I/O root domain of Oracle Solaris

11.

■

An Oracle Solaris 10 zone is configured on an Oracle Solaris 11 domain.

laris 11 only, Oracle Solaris 10 only, or

Page 10

If there are plans to add an I/O root domain or I/O domain of Oracle Solaris 10 after the start of system operation, apply the rules for Oracle Solaris 10.

Note -

For details on the design of control domain, I/O root domain, and I/O domain

configurations, see the Fujitsu M10/SPARC M10 Systems Domain Configuration Guide.

1.1.2 System firmware XCP version

The maximum number of each type of mounted PCI card and the slots available for mounting may vary depending on the system firmware version. For XCP2050 or later, see the tables in "1.2.1 If XCP2050 or later is used and Oracle Solaris 11 is

installed on all the domains" and "1. Solaris 10 is installed on all the domains or if XCP2050 or later is used and Oracle Solaris 11 and Oracle Solaris 10 are mixed" according to the Oracle Solaris version.

For XCP2044 or earlier, see "1.2.3 XCP2044 or earlier" r Solaris version.

2.2 If XCP2050 or later is used and Oracle

egardless of the Oracle

1.2 Maximum Number of Each Type of Mounted PCI Card and Available PCI Slots

For the maximum number of each type of mounted PCI card and the available PCI slots, see Table 1-1 to Table 1-6 according to the domain OS version.

■

"Maximum number mounted" in the tables means the maximum number of PCI cards that can be mounted in the SPARC M10-1 or PCI expansion unit. The numbers in ( ) indicate the slot numbers where cards can be mounted, among the PCI slots of the SPARC M10-1. If there are no ( ), all of th mounting. In any PCI expansion unit where cards can be mounted, all of the slots are available for mounting.

■

The SPARC M10 has an I/O bandwidth of 8 GB/s per root complex. The bandwidth between the PCI expansion unit and the SPARC M10 is also 8 GB/s. The PCI cards mounted in the PCI expansion unit share that bandwidth, which caps the performance of all the PCI cards operating at th high-speed communication card requires a certain level of performance, mount the card in a PCI slot in the SPARC M10-1 instead of mounting it in the PCI expansion unit.

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

e slots are available for

e same time. If a

July 20142

Page 11

1.2.1 If XCP2050 or later is used and Oracle Solaris 11 is installed on all the domains

Table 1-1

Type Product name Product ID Maximum number mounted

Link PCI expansion unit connection card SPME8LK1F - 2 (#0,#1)

LAN Dual Gigabit Ethernet card (MMF) SP1X7GD2F 3 23

FCoE Dual 10Gbps FCoE card (for optical

FC Dual-channel 16Gbps Fibre

Maximum number of each type of mounted PCI card: SPARC M10-1 with Oracle Solaris 11 (Fujitsu product ID)

Without PCI expansion unit

Dual Gigabit Ethernet card (MMF) SP1X7GD1F 3 23

Quad Gigabit Ethernet card (UTP) SP1X7GQ2F 3 23

Quad Gigabit Ethernet card (UTP) SP1X7GQ1F 3 23

Dual 10Gigabit Ethernet card (10GBase-T)

Dual 10Gigabit Ethernet card SE1X7HE3G 3 23

cable)

Dual 10Gbps FCoE card (for Copper Twinax cable)

Dual-channel 10Gbps FCoE card (f

or optical cable) (QLogic)

Dual-channel 10Gbps FCoE card (for Copper Twinax cable) (QLogic)

Dual-channel 10Gbps FCoE card (for optical cable) (Emulex)

Dual-channel 10Gbps FCoE card (for Copper Twinax cable) (Emulex)

Channel card (SR SFP+)

Dual-channel 16Gbps Fibre Channel card (LR SFP+)

Dual-channel 16Gbps Fibre Channel card (SR SFP+)

Dual-channel 8Gbps Fibre Channel card (QLogic)

Single-channel 8Gbps Fibre Channel card (QLogic)

SP1X7HF1F 3 23

SE0X7EF12F 3 23

SE0X7EC12F 3 23

SP1X7FAR2F 3 23

SP1X7FAS2F 3 23

SP1X7FBR2F 3 23

SP1X7FBS2F 3 23

SP1X7FAA2F 3 23

SP1X7FAB2F 3 23

1X7FBA2F 3 23

SE0X7F22F 3 23

SE0X7F21F 3 23

With PCI expansion unit

Chapter 1　PCI Card Mounting Rules for the SPARC M10-1 3

Page 12

Table 1-1

Type Product name Product ID Maximum number mounted

Maximum number of each type of mounted PCI card: SPARC M10-1 with Oracle Solaris 11 (Fujitsu

product ID) (continu ed)

Dual-channel 8Gbps Fibre Channel card (Emulex)

Single-channel 8Gbps Fibre Channel card (Emulex)

Without PCI expansion unit

SE0X7F32F 3 23

SE0X7F31F 3 23

With PCI expansion unit

SAS 6Gbps SAS card SE0X7SA2F 3 23

SAS card SE0X7SA1F 3 23

FLASH Flash Accelerator F80 card SP1X7Y21F 3 23

Flash Accelerator F40 card SP1X7Y11F 3 23

IB Dual Port InfiniBand 4x QDR card SP1X7BA12F 2 (#0,#1) 1 (#0,#1)

PCI expansion unit mounting not possible

Dual Port InfiniBand 4x QDR card SE1X7BA12F 3 23

Graphic Graphics card SP0X7GR1F - -

Table 1-2

Type Product name For mounting before shipment

Maximum number of each type of mounted PCI card: SPARC M10-1 with Oracle Solaris 11 (Oracle

product ID)

from factory

(For installation on site) Without PCI

Maximum number mounted

expansion unit

With PCI expansion unit

Link Link card kit 7105513(7105576) - 2 (#0,#1)

LAN Sun Dual Port GbE PCIe2.0

LowProfileAdapter,MMF

Sun Quad PortGbE PCIe2.0 LowProfile Adapter,UTP

7100482(7100481) 3 23

7100479(7100477) 3 23

Sun Dual Port 10GBase-T Adapter 7100563(7100488) 3 23

Sun Dual 10GbE SFP+ PCIe 2.0 Low Profile Adapter

PCIe Quad port GigE (copper) x8 lane card

PCI-E Low-Profile Dual GigE MMF 7281A-2-N(X7281A-

1109A-Z(X1109A-Z) 3 23

4447A-Z-N(X4447A-

323

Z-N)

323

2-N)

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 20144

Page 13

Table 1-2

Type Product name For mounting before shipment

FC/FCoE

Maximum number of each type of mounted PCI card: SPARC M10-1 with Oracle Solaris 11 (Oracle product ID) (continued)

from factory

(For installation on site) Without PCI

Sun Storage 10 GbE PCIe FCoE Converged Network Adapter: QLogic low profile, dual port and

optics

Sun Storage 10 GbE PCIe FCoE Converged Network Adapter: QLogic low profile, dual port and Twin-AX

Sun Storage 16Gb Fibre Channel PCIe Universal Host Bus Adapter, Qlogic

with the 16 Gb FC short wave optics

with the 16 Gb FC long wave optics

with the 10 Gb FCoE short reach optics or TwinAx cables

Sun Storage 16Gb Fibre Channel PCIe Universal Host Bus Adapter, Emulex

with the 16 Gb FC short wave optics

with the 10 Gb FCo reach optics or TwinAx cables

E short

SG-PCIEFCOE2-QSR(7105381,SGXPCIEFCOE2-Q-SR)

SG-PCIEFCOE2-QTA(7105382,SGXPCIEFCOE2-Q-TA)

7101673(7101674) - -

with 7101675(7101676) 3 23

with 7101679(7101680) 3 23

with 7101677(7101678)

TwinAx cables

7101683(7101684) - -

with 7101685(7101686) 3 23

with 7101687(7101688) 3 23

8 Gb FC PCIe, QLogic, Dual Port SG-PCIE2FC-QF8-Z

(SG-XPCIE2FC-QF8-

8 Gb FC PCIe, QLogic, Single Port SG-PCIE1FC-QF8-Z

(SG-XPCIE1FC-QF8-

8 Gb FC PCIe, Emulex, Dual Port SG-PCIE2FC-EM8-

Z(SG-XPCIE2FCEM8-N)

8 Gb FC PCIe, Emulex, Single Port SG-PCIE1FC-EM8-

Z(SG-XPCIE1FCEM8-N)

SAS Sun Storage 6 Gb SAS PCIe HBA: 8

rts, external

SG-SAS6-EXT-Z (7105387,SGX-SAS6EXT-Z)

Maximum number mounted

expansion unit

With PCI expansion unit

323

Chapter 1　PCI Card Mounting Rules for the SPARC M10-1 5

Page 14

Table 1-2

Type Product name For mounting before shipment

FLASH Flash Accelerator F80 PCIe Card:

IB Oracle Dual port QDR InfiniBand

Maximum number of each type of mounted PCI card: SPARC M10-1 with Oracle Solaris 11 (Oracle

product ID) (continu ed)

from factory

(For installation on site) Without PCI

Sun StorageTek 8-port External SAS PCI-Express Host Bus Adapter

800GB, eMLC

Flash Accelerator F40 card 7104480(7104482) 3 23

Adapter M3

Sun InfiniBand QDR Host Channel Adapter PCIe: low profile

SG-PCIE8SAS-E-ZN(SG-XPCIE8SASE-Z-N)

7107091(7107092) 3 23

7104073(7104074) 2 (#0,#1) 1 (#0,#1)

4242A(X4242A) 3 23

Maximum number mounted

expansion unit

323

With PCI expansion unit

PCI expansion unit mounting not possible

1.2.2 If XCP2050 or later is used and Oracle Solaris 10 is installed on all the domains or if XCP2050 or later

used and Oracle Solaris 11 and Oracle Solaris

are mixed

Table 1-3

Type Product name Product ID Maximum number mounted

Link PCI expansion unit connection card SPME8LK1F - 2 (#0,#1)

LAN Dual Gigabit Ethernet card (MMF) SP1X7GD2F 3 23

Maximum number of each type of mounted PCI card: SPARC M10-1 with either Oracle Solaris 10

the mixture of Oracle Solaris 10 and 11 (Fujitsu product ID)

Without PCI expansion unit

Dual Gigabit Ethernet card (MMF) SP1X7GD1F 3 23

Quad Gigabit Ethernet card (UTP) SP1X7GQ2F 3 23

Quad Gigabit Ethernet card (UTP) SP1X7GQ1F 3 23

With PCI expansion unit

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 20146

Page 15

Table 1-3

Type Product name Product ID Maximum number mounted

Maximum number of each type of mounted PCI card: SPARC M10-1 with either Oracle Solaris 10

the mixture of Oracle Solaris 10 and 11 (Fujitsu product ID) (continu ed)

Dual 10Gigabit Ethernet card (10GBase-T)

Without PCI expansion unit

SP1X7HF1F 3 1 (#0,#1)

With PCI expansion unit

PCI expansion unit mounting not possible

Dual 10Gigabit Ethernet card SE1X7HE3G 3 1 (#0,#1)

PCI expansion unit mounting not possible

FCoE Dual 10Gbps FCoE card (for optical

cable)

Dual 10Gbps FCoE card (for Copper Twinax cable)

Dual-channel 10Gbps FCo (for optical cable) (QLogic)

E card

Dual-channel 10Gbps FCoE card (for Copper Twinax cable) (QLogic)

Dual-channel 10Gbps FCoE card (for optical cable) (Emulex)

SE0X7EF12F 3 1 (#0,#1)

PCI expansion unit mounting not possible

SE0X7EC12F 3 1 (#0,#1)

PCI expansion unit mounting not possible

SP1X7FAR2F 3 1 (#0,#1)

PCI expansion unit mounting not possible

SP1X7FAS2F 3 1 (#0,#1)

PCI expansion unit mounting not possible

SP1X7FBR2F 3 1 (#0,#1)

PCI expansion unit mounting not possible

Chapter 1　PCI Card Mounting Rules for the SPARC M10-1 7

Page 16

Table 1-3

Type Product name Product ID Maximum number mounted

FC Dual-channel 16Gbps Fibre

Maximum number of each type of mounted PCI card: SPARC M10-1 with either Oracle Solaris 10

the mixture of Oracle Solaris 10 and 11 (Fujitsu product ID) (continued)

Dual-channel 10Gbps FCoE card (for Copper Twinax cable) (Emulex)

Without PCI expansion unit

SP1X7FBS2F 3 1 (#0,#1)

With PCI expansion unit

PCI expansion unit mounting not possible

SP1X7FAA2F 3 23

Channel card (SR SFP+)

Dual-channel 16Gbps Fibre Channel card (LR SFP+)

Dual-channel 16Gbps Fibre Channel card (SR SFP+)

Dual-channel 8Gbps Fibre Channel card (QLogic)

Single-channel 8Gbps Fi Channel card (QLogic)

bre

Dual-channel 8Gbps Fibre Channel card (Emulex)

Single-channel 8Gbps Fibre Channel card (Emulex)

SP1X7FAB2F 3 23

SP1X7FBA2F 3 1 (#0,#1)

PCI expansion unit mounting not possible

SE0X7F22F 3 23

SE0X7F21F 3 23

SE0X7F32F 3 1 (#0,#1)

PCI expansion unit mounting not possible

SE0X7F31F 3 1 (#0,#1)

PCI expansion unit mounting not possible

SAS 6Gbps SAS card SE0X7SA2F 3 23

SAS card SE0X7SA1F 3 23

FLASH Flash Accelerator F80 card SP1X7Y21F 3 23

Flash Accelerator F40 card SP1X7Y11F 3 23

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 20148

Page 17

Table 1-3

Type Product name Product ID Maximum number mounted

Maximum number of each type of mounted PCI card: SPARC M10-1 with either Oracle Solaris 10

the mixture of Oracle Solaris 10 and 11 (Fujitsu product ID) (continu ed)

Without PCI expansion unit

With PCI expansion unit

IB Dual Port InfiniBand 4x QDR card SP1X7BA12F 2 (#0,#1) 1 (#0,#1)

PCI expansion unit mounting not possible

Dual Port InfiniBand 4x QDR card SE1X7BA12F 3 23

Graphic Graphics card SP0X7GR1F 1(#2) 1(#2)

PCI expansion unit mounting not possible

Table 1-4

Type Product name For mounting before shipment

Maximum number of each type of mounted PCI card: SPARC M10-1 with either Oracle Solaris 10

the mixture of Oracle Solaris 10 and 11 (Oracle product ID)

from factory

(For installation on site) Without PCI

Maximum number mounted

expansion unit

With PCI expansion unit

Link Link card kit 7105513(7105576) - 2 (#0,#1)

LAN Sun Dual Port GbE PCIe2.0

LowProfileAdapter,MMF

Sun Quad PortGbE PCIe2.0 LowProfile Adapter,UTP

7100482(7100481) 3 23

7100479(7100477) 3 23

Sun Dual Port 10GBase-T Adapter 7100563(7100488) 3 1 (#0,#1)

PCI expansion unit mounting not possible

Sun Dual 10GbE SFP+ PCIe 2.0 Low Profile Adapter

1109A-Z(X1109A-Z) 3 1 (#0,#1)

PCI expansion unit mounting not possible

Chapter 1　PCI Card Mounting Rules for the SPARC M10-1 9

Page 18

Table 1-4

Type Product name For mounting before shipment

Maximum number of each type of mounted PCI card: SPARC M10-1 with either Oracle Solaris 10

the mixture of Oracle Solaris 10 and 11 (Oracle product ID) (continued)

from factory

(For installation on site) Without PCI

PCIe Quad port GigE (copper) x8 lane card

4447A-Z-N(X4447AZ-N)

PCI-E Low-Profile Dual GigE MMF 7281A-2-N(X7281A-

2-N)

FC/FCoE

Sun Storage 10 GbE PCIe FCoE Converged Network Adapter: QLogic low profile, dual port and

optics

Sun Storage 10 GbE PCIe FCoE Converged Network Adapter: QLogic low profile, dual port and Twin-AX

Sun Storage 16 PCIe Universal Host Bus Adapter, Qlogic

Gb Fibre Channel

with the 16 Gb FC short wave optics

with the 16 Gb FC long wave optics

with the 10 Gb FCoE short reach optics or TwinAx cables

Sun Storage 16 PCIe Universal Host Bus Adapter, Emulex

Gb Fibre Channel

SG-PCIEFCOE2-QSR(7105381,SGXPCIEFCOE2-Q-SR)

SG-PCIEFCOE2-QTA(7105382,SGXPCIEFCOE2-Q-TA)

7101673(7101674) - -

with 7101675(7101676) 3 23

with 7101679(7101680) 3 23

with 7101677(7101678)

TwinAx cables

7101683(7101684) - -

Maximum number mounted

expansion unit

With PCI expansion unit

(#0,#1) PCI expansion unit mounting not possible

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201410

Page 19

Table 1-4

Type Product name For mounting before shipment

Maximum number of each type of mounted PCI card: SPARC M10-1 with either Oracle Solaris 10

the mixture of Oracle Solaris 10 and 11 (Oracle product ID) (continued)

from factory

(For installation on site) Without PCI

with the 16 Gb FC short wave optics

with the 10 Gb FCoE short reach optics or TwinAx cables

with 7101685(7101686) 3 1 (#0,#1)

with 7101687(7101688) 3 1 (#0,#1)

8 Gb FC PCIe, QLogic, Dual Port SG-PCIE2FC-QF8-Z

(SG-XPCIE2FC-QF8N)

8 Gb FC PCIe, QLogic, Single Port SG-PCIE1FC-QF8-Z

(SG-XPCIE1FC-QF8N)

8 Gb FC PC

Ie, Emulex, Dual Port SG-PCIE2FC-EM8-

Z(SG-XPCIE2FCEM8-N)

8 Gb FC PCIe, Emulex, Single Port SG-PCIE1FC-EM8-

Z(SG-XPCIE1FCEM8-N)

SAS Sun Storage 6 Gb SAS PCIe HBA: 8

ports, external

SG-SAS6-EXT-Z (7105387,SGX-SAS6EXT-Z)

Sun StorageTek 8-port External SAS PCI-Express Host Bus Adapter

SG-PCIE8SAS-E-ZN(SG-XPCIE8SASE-Z-N)

FLASH Flash Accelerator F80 PCIe Card:

800GB, eMLC

7107091(7107092) 3 23

Flash Accelerator F40 card 7104480(7104482) 3 23

Maximum number mounted

expansion unit

With PCI expansion unit

PCI expansion unit mounting not possible

323

(#0,#1) PCI expansion unit mounting not possible

323

Chapter 1　PCI Card Mounting Rules for the SPARC M10-1 11

Page 20

Table 1-4

Type Product name For mounting before shipment

IB Oracle Dual port QDR InfiniBand

Maximum number of each type of mounted PCI card: SPARC M10-1 with either Oracle Solaris 10

the mixture of Oracle Solaris 10 and 11 (Oracle product ID) (continued)

from factory

(For installation on site) Without PCI

7104073(7104074) 2 (#0,#1) 1 (#0,#1)

Adapter M3

Sun InfiniBand QDR Host Channel Adapter PCIe: low profile

4242A(X4242A) 3 23

1.2.3 XCP2044 or earlier

Maximum number mounted

expansion unit

With PCI expansion unit

PCI expansion unit mounting not possible

Table 1-5

Type Product name Product ID Maximum number mounted

Maximum number of each type of mounted PCI card: SPARC M10-1 with XCP2044 or earlier

(Fujitsu product ID)

Without PCI expansion unit

With PCI expansion unit

Link PCI expansion unit connection card SPME8LK1F - 2 (#0,#1)

LAN Dual Gigabit Ethernet card (MMF) SP1X7GD2F 3 23

Dual Gigabit Ethernet card (MMF) SP1X7GD1F 3 23

Quad Gigabit Ethernet card (UTP) SP1X7GQ2F 3 23

Quad Gigabit Ethernet card (UTP) SP1X7GQ1F 3 23

Dual 10Gigabit Ethernet card (10GBase-T)

SP1X7HF1F 2 (#0,#1) 1 (#0,#1)

PCI expansion unit mounting not possible

Dual 10Gigabit Ethernet card SE1X7HE3G 2 (#0,#1) 1 (#0,#1)

PCI expansion unit mounting not possible

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201412

Page 21

Table 1-5

Type Product name Product ID Maximum number mounted

FCoE Dual 10Gbps FCoE card (for optical

FC Dual-channel 16Gbps Fibre

Maximum number of each type of mounted PCI card: SPARC M10-1 with XCP2044 or earlier (Fujitsu product ID) (continued)

Without PCI expansion unit

SE0X7EF12F 2 (#0,#1) 1 (#0,#1)

cable)

Dual 10Gbps FCoE card (for Copper Twinax cable)

Dual-channel 10Gbps FCoE card (for optical cable) (QLogic)

Dual-channel 10Gbps FCoE card (for Copper Tw

inax cable) (QLogic)

Dual-channel 10Gbps FCoE card (for optical cable) (Emulex)

Dual-channel 10Gbps FCoE card (for Copper Twinax cable) (Emulex)

SE0X7EC12F 2 (#0,#1) 1 (#0,#1)

SP1X7FAR2F 2 (#0,#1) 1 (#0,#1)

SP1X7FAS2F 2 (#0,#1) 1 (#0,#1)

SP1X7FBR2F 2 (#0,#1) 1 (#0,#1)

SP1X7FBS2F 2 (#0,#1) 1 (#0,#1)

SP1X7FAA2F 3 23

Channel card (SR SFP+)

Dual-channel 16 Channel card (LR SFP+)

Gbps Fibre

SP1X7FAB2F 3 23

With PCI expansion unit

PCI expansion unit mounting not possible

Chapter 1　PCI Card Mounting Rules for the SPARC M10-1 13

Page 22

Table 1-5

Type Product name Product ID Maximum number mounted

Maximum number of each type of mounted PCI card: SPARC M10-1 with XCP2044 or earlier

(Fujitsu product ID) (continued)

Without PCI expansion unit

Dual-channel 16Gbps Fibre Channel card (SR SFP+)

Dual-channel 8Gbps Fibre Channel card (QLogic)

Single-channel 8Gbps Fibre Channel card (QLogic)

Dual-channel 8Gbps Fibre Channel card (Emulex)

Single-channel 8Gbps Fibre Channel card (Emulex)

SP1X7FBA2F 2 (#0,#1) 1 (#0,#1)

SE0X7F22F 3 23

SE0X7F21F 3 23

SE0X7F32F 2 (#0,#1) 1 (#0,#1)

SE0X7F31F 2 (#0,#1) 1 (#0,#1)

With PCI expansion unit

PCI expansion unit mounting not possible

PCI expansion unit

unting not

mo possible

SAS 6Gbps SAS card SE0X7SA2F 3 23

SAS card SE0X7SA1F 3 23

FLASH Flash Accelerator F80 card SP1X7Y21F 3 23

Flash Accelerator F40 card SP1X7Y11F 3 23

IB Dual Port InfiniBand 4x QDR card SP1X7BA12F 2 (#0,#1) 1 (#0,#1)

PCI expansion unit mounting not possible

Dual Port InfiniBand 4x QDR card SE1X7BA12F 3 23

Graphic Graphics card SP0X7GR1F 1(#2) 1(#2)

PCI expansion unit mounting not possible

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201414

Page 23

Table 1-6

Type Product name For mounting before shipment

Maximum number of each type of mounted PCI card: SPARC M10-1 with XCP2044 or earlier (Oracle product ID)

from factory

(For installation on site) Without PCI

Maximum number mounted

expansion unit

With PCI expansion unit

Link Link card kit 7105513(7105576) - 2 (#0,#1)

LAN Sun Dual Port GbE PCIe2.0

LowProfileAdapter,MMF

Sun Quad PortGbE PCIe2.0 LowProfile Adapter,UTP

7100482(7100481) 3 23

7100479(7100477) 3 23

Sun Dual Port 10GBase-T Adapter 7100563(7100488) 2 (#0,#1) 1 (#0,#1)

PCI expansion unit mounting not possible

FC/FCoE

Sun Dual 10GbE SFP+ PCIe 2.0 Low Profile Adapter

PCIe Quad port GigE (copper) x8 lane ca

PCI-E Low-Profile Dual GigE MMF 7281A-2-N(X7281A-

Sun Storage 10 GbE PCIe FCoE Converged Network Adapter: QLogic low profile, dual port and

optics

Sun Storage 10 GbE PCIe FCoE Converged Network Adapter: QLogic low profile, dual port and Twin-AX

1109A-Z(X1109A-Z) 2 (#0,#1) 1 (#0,#1)

PCI expansion unit mounting not possible

4447A-Z-N(X4447A-

Z-N)

2 (#0,#1) 1 (#0,#1)

PCI expansion unit mounting not possible

2 (#0,#1) 1 (#0,#1)

2-N)

SG-PCIEFCOE2-QSR(7105381,SGXPCIEFCOE2-Q-SR)

SG-PCIEFCOE2-QTA(7105382,SGXPCIEFCOE2-Q-TA)

2 (#0,#1) 1 (#0,#1)

PCI expansion unit mounting not possible

Chapter 1　PCI Card Mounting Rules for the SPARC M10-1 15

Page 24

Table 1-6

Type Product name For mounting before shipment

Maximum number of each type of mounted PCI card: SPARC M10-1 with XCP2044 or earlier

(Oracle product ID) (continu ed)

from factory

(For installation on site) Without PCI

Sun Storage 16Gb Fibre Channel PCIe Universal Host Bus Adapter, Qlogic

with the 16 Gb FC short wave optics

with the 16 Gb FC long wave optics

with the 10 Gb FCoE short reach optics or TwinAx cables

Sun Storage 16Gb Fibre Channel PCIe Universal Host Bus Adapter, Emulex

with the 16 Gb FC short wave optics

with the 10 Gb FCoE short reach optics or TwinAx cables

7101673(7101674) - -

with 7101675(7101676) 3 23

with 7101679(7101680) 3 23

with 7101677(7101678)

TwinAx cables

7101683(7101684) - -

with 7101685(7101686) 2 (#0,#1) 1 (#0,#1)

with 7101687(7101688) 2 (#0,#1) 1 (#0,#1)

8 Gb FC PCIe, QLogic, Dual Port SG-PCIE2FC-QF8-Z

(SG-XPCIE2FC-QF8N)

8 Gb FC PCIe, QLogic, Single Port SG-PCIE1FC-QF8-Z

(SG-XPCIE1FC-QF8N)

8 Gb FC PCIe, Emulex, Dual Port SG-PCIE2FC-EM8-

Z(SG-XPCIE2FCEM8-N)

Maximum number mounted

expansion unit

With PCI expansion unit

2 (#0,#1) 1 (#0,#1)

PCI expansion unit mounting not possible

323

2 (#0,#1) 1 (#0,#1)

PCI expansion unit mounting not possible

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201416

Page 25

Table 1-6

Type Product name For mounting before shipment

Maximum number of each type of mounted PCI card: SPARC M10-1 with XCP2044 or earlier (Oracle product ID) (continued)

from factory

(For installation on site) Without PCI

8 Gb FC PCIe, Emulex, Single Port SG-PCIE1FC-EM8-

Z(SG-XPCIE1FCEM8-N)

SAS Sun Storage 6 Gb SAS PCIe HBA: 8

ports, external

SG-SAS6-EXT-Z (7105387,SGX-SAS6EXT-Z)

Sun StorageTek 8-port External SAS PCI-Express Host Bus Adapter

SG-PCIE8SAS-E-ZN(SG-XPCIE8SASE-Z-N)

FLASH Flash Accelerator F80 PCIe Card:

800GB, eMLC

7107091(7107092) 3 23

Flash Accelerator F40 card 7104480(7104482) 3 23

IB Oracle Dual port QD

Adapter M3

Sun InfiniBand QDR Host Channel Adapter PCIe: low profile

R InfiniBand

7104073(7104074) 2 (#0,#1) 1 (#0,#1)

4242A(X4242A) 3 23

Maximum number mounted

expansion unit

With PCI expansion unit

2 (#0,#1) 1 (#0,#1)

PCI expansion unit mounting not possible

323

PCI expansion unit mounting not possible

1.3 Hardware Configuration Diagram

Figure 1-1 is a hardware configuration diagram of the SPARC M10-1.

Chapter 1　PCI Card Mounting Rules for the SPARC M10-1 17

Page 26

Figure 1-1

Hardware configuration diagram of the SPARC M10-1

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201418

Page 27

Chapter 2

PCI Card Mounting Rules for the SPARC M10-4

This chapter describes the maximum number of each type of mounted PCI card and the rules for mounting PCI cards in PCI slots when mounting PCI cards in the SPARC M10-4. Be sure to observe these mounting rules when designing the system and when installing a PCI card or changing the mounting location of a PCI card

■

Prerequisites

Maximum Number of Each Type of Mounted PCI Card and Available PCI Slots

Relationship between the CPU Configuration and the Number of Root Complexes

2.1 Prerequisites

■

Domain OS

■

System firmware XCP version

■

Number of CPUs and number of root complexes

2.1.1 Domain OS

I/O root domain, and I/O domain are Oracle So

mixture of the two. If an Oracle Solaris 10 environment is used in the following configurations, apply the rules for Oracle Solaris 11.

■

A guest domain of an Oracle Solaris 10 environment is configured using the virtual I/O services of a control domain or the I/O root domain of Oracle Solaris

11.

laris 11 only, Oracle Solaris 10 only, or

Page 28

■

An Oracle Solaris 10 zone is configured on an Oracle Solaris 11 domain.

If there are plans to add an I/O root domain or I/O domain of Oracle Solaris 10 after the start of system operation, apply the rules for Oracle Solaris 10.

Note -

For details on the design of control domain, I/O root domain, and I/O domain

configurations, see the Fujitsu M10/SPARC M10 Systems Domain Configuration Guide.

2.1.2 System firmware XCP version

The maximum number of each type of mounted PCI card and the slots available for mounting may vary depending on the system firmware version. For XCP2050 or later, see the tables in "2.2.1 If XCP2050 or later is used and Oracle Solaris 11 is

installed on all the domains" and "2. Solaris 10 is installed on all the domains or if XCP2050 or later is used and Oracle Solaris 11 and Oracle Solaris 10 are mixed" according to the Oracle Solaris version.

For XCP2044 or earlier, see "2.2.3 XCP2044 or earlier" r Solaris version.

2.2 If XCP2050 or later is used and Oracle

egardless of the Oracle

2.1.3 Number of CPUs and number of root complexes

A root complex consists of an I/O controller mounted on a processor and the PCI switches, PCI devices, etc. under the I/O controller. For details, see "2.3 Relationship between the CPU Configuration and the Number

Root Complexes."

The maximum number of each type of mounted PCI card and the available PCI sl vary depending on the number of root complexes. The number of root complexes of the SPARC M10-4 is as follows according to the CPU configuration.

■

For a 2-CPU configuration, four root complexes

■

For a 4-CPU configuration, four or eight root complexes

Note -

For cases where a CPU module is installed after the installation of the equipment with a change from the 2-CPU configuration to the 4-CPU configuration, the recommended configuration is the one with four root complexes. This configuration inherits the I/O bus configuration and mounting rules of the 2-CPU configuration. Changing the conf into one with eight root complexes increases the maximum number of mounted PCI cards. However, system reconfiguration is required because the I/O bus is reconfigured.

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

ots

iguration

July 201420

Page 29

2.2 Maximum Number of Each Type of Mounted PCI Card and Available PCI Slots

For the maximum number of each type of mounted PCI card and the available PCI slots, see Table 2-1 to Table 2-6 according to the domain OS version.

■

"Maximum number mounted" means the maximum number of PCI cards that can

mounted in the SPARC M10-4 or PCI expansion unit. The numbers in ( ) indicate the slot numbers where cards can be mounted, among the PCI slots of the SPARC M10-4. If there are no ( ), all of the slo PCI expansion unit where cards can be mounted, all of the slots are available for mounting.

■

"2CPU" and "4CPU" under "Maximum number mounted" in the tables refer to the following cases.

- 2CPU: Configuration with 4 root complexes

In one case, a CPU memory unit has not been installed. In another case, a CPU memory unit has been installed on site, and the I/O bus has not been reconfigured.

- 4C

PU: Configuration with 8 root complexes In one case, a CPU memory unit has been ordered together with the server (installed at the factory). In another case, a CPU memory unit has been installed on site and the I/O bus has been reconfigured.

■

The SPARC M10 has an I/O bandwidth of 8 GB/s per root complex. The bandwidth between the PCI expansion unit and the SPARC M10 is also 8 GB/s. The PCI cards mounted in the PCI expansion unit share that bandwidth, which caps the performance of all the PCI cards operating at the sam high-speed communication card requires a certain level of performance, mount the card in a PCI slot in the SPARC M10-4 instead of mounting it in the PCI expansion unit.

ts are available for mounting. In any

e time. If a

Chapter 2　PCI Card Mounting Rules for the SPARC M10-4 21

Page 30

2.2.1 If XCP2050 or later is used and Oracle Solaris 11 is installed on all the domains

Table 2-1

Type Product name Product ID Maximum number mounted

Link PCI expansion unit connection card SPME8LK1F - 2CPU:3(#0,#3,

LAN Dual Gigabit Ethernet card (MMF) SP1X7GD2F 11 2CPU:41

FCoE Dual 10Gbps FCoE card (for optical

FC Dual-channel 16Gbps Fibre

Maximum number of each type of mounted PCI card: SPARC M10-4 with Oracle Solaris 11 (Fujitsu

product ID)

Without PCI expansion unit

Dual Gigabit Ethernet card (MMF) SP1X7GD1F 11 2CPU:41

Quad Gigabit Ethernet card (UTP) SP1X7GQ2F 11 2CPU:41

Quad Gigabit Ethernet card (UTP) SP1X7GQ1F 11 2CPU:41

Dual 10Gigabit Ethernet card (10GBase-T)

Dual 10Gigabit Ethernet card SE1X7HE3G 11 2CPU:41

cable)

Dual 10Gbps FCoE card (for Copper Twinax cable)

Dual-channel 10Gbps FCoE card (for optical cable) (QLogic)

Dual-channel 10Gbps FCoE card (for Copper Twinax cable) (QLogic)

Dual-channel 10Gbps FCoE card (for optical cable) (Emulex)

Dual-channel 10Gbps FCoE card (for Copper Twinax cable) (Emulex)

Channel card (SR SFP+)

Dual-channel 16Gbps Fibre Channel card (LR SFP+)

SP1X7HF1F 11 2CPU:41

SE0X7EF12F 11 2CPU:41

SE0X7EC12F 11 2CPU:41

SP1X7FAR2F 11 2CPU:41

SP1X7FAS2F 11 2CPU:41

SP1X7FBR2F 11 2CPU:41

SP1X7FBS2F 11 2CPU:41

SP1X7FAA2F 11 2CPU:41

P1X7FAB2F 11 2CPU:41

With PCI expansion unit

#7) 4CPU:6(#0,#1, #3,#5,#7,#9)

4CPU:71

PU:71

4CPU:71

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201422

Page 31

Table 2-1

Type Product name Product ID Maximum number mounted

Maximum number of each type of mounted PCI card: SPARC M10-4 with Oracle Solaris 11 (Fujitsu product ID) (continued)

Dual-channel 16Gbps Fibre Channel card (SR SFP+)

Dual-channel 8Gbps Fibre Channel card (QLogic)

Single-channel 8Gbps Fibre Channel card (QLogic)

Dual-channel 8Gbps Fibre Channel card (Emulex)

Single-channel 8Gbps Fibre Channel card (Emulex)

Without PCI expansion unit

SP1X7FBA2F 11 2CPU:41

SE0X7F22F 11 2CPU:41

SE0X7F21F 11 2CPU:41

SE0X7F32F 11 2CPU:41

SE0X7F31F 11 2CPU:41

With PCI expansion unit

4CPU:71

SAS 6Gbps SAS card SE0X7SA2F 11 2CPU:41

4CPU:71

SAS card SE0X7SA1F 11 2CPU:41

4CPU:71

FLASH Flash Accelerator F80 card SP1X7Y21F 11 2CPU:41

4CPU:71

Flash Accelerator F40 card SP1X7Y11F 11 2CPU:41

4CPU:71

IB Dual Port InfiniBand 4x QDR c

ard SP1X7BA12F 2CPU:3(#0,#3,

#7)(*1) 4CPU:6(#0,#1, #3,#5,#7,#9)

2CPU:2(#0,#3, #7)(*1) 4CPU:5(#0,#1, #3,#5,#7,#9) PCI expansion unit mounting not possible

Dual Port InfiniBand 4x QDR card SE1X7BA12F 11 2CPU:41

4CPU:71

Graphic Graphics card SP0X7GR1F - -

*1 If this card is mounted in Slot#0 in a 2-CPU configuration, Slot#2 cannot be used. If this card is mounted in Slot#3, Slot#5 and #6 cannot be used. If this card is mounted in Slot#7, Slot#9 and #10 cannot be used.

Chapter 2　PCI Card Mounting Rules for the SPARC M10-4 23

Page 32

Table 2-2

Type Product name For mounting before shipment

Maximum number of each type of mounted PCI card: SPARC M10-4 with Oracle Solaris 11 (Oracle

product ID)

from factory

(For installation on site) Without PCI

Maximum number mounted

expansion unit

With PCI expansion unit

Link Link card kit 7105513(7105576) - 2CPU:3(#0,#3,

#7) 4CPU:6(#0,#1, #3,#5,#7,#9)

LAN Sun Dual Port GbE PCIe2.0

LowProfileAdapter,MMF

Sun Quad PortGbE PCIe2.0 LowProfile Adapter,UTP

7100482(7100481) 11 2CPU:41

4CPU:71

7100479(7100477) 11 2CPU:41

4CPU:71

Sun Dual Port 10GBase-T Adapter 7100563(7100488) 11 2CPU:41

4CPU:71

FC/FCoE

Sun Dual 10GbE SFP+ PCIe 2.0 Low Profile Adapter

PCIe Quad port GigE (copper) x8 lane card

PCI-E Low-Profile Dual GigE MMF 7281A-2-N(X7281A-

Sun Storage 10 GbE PCIe FCoE Converged Network Adapter: QLogic low profile, dual port and

optics

Sun Storage 10 GbE PCIe FCoE Converged Network Adapter: QLogic low profile, dual port and Twin-AX

Sun Storage 16Gb Fibre Channel PCIe Universal Host Bus Adapter, Qlogic

with the 16 Gb FC short wave optics

with the 16 Gb FC long wave optics

with the 10 Gb FCoE short reach optics or TwinAx cables

Sun Storage 16Gb Fibre Channel PCIe Universal Host Bus Adapter, Emulex

with the 16 Gb FC short wave optics

1109A-Z(X1109A-Z) 11 2CPU:41

4CPU:71

4447A-Z-N(X4447AZ-N)

11 2CPU:41

4CPU:71

11 2CPU:41

2-N)

SG-PCIEFCOE2-QSR(7105381,SG-

11 2CPU:41

4CPU:71

XPCIEFCOE2-Q-SR)

SG-PCIEFCOE2-QTA(7105382,SG-

11 2CPU:41

4CPU:71

XPCIEFCOE2-Q-TA)

7101673(7101674) - -

with 7101675(7101676) 11 2CPU:41

4CPU:71

with 7101679(7101680) 11 2CPU:41

4CPU:71

with 7101677(7101678)

TwinAx cables

11 2CPU:41

4CPU:71

7101683(7101684) - -

wit

h 7101685(7101686) 11 2CPU:41

4CPU:71

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201424

Page 33

Table 2-2

Type Product name For mounting before shipment

Maximum number of each type of mounted PCI card: SPARC M10-4 with Oracle Solaris 11 (Oracle product ID) (continued)

from factory

(For installation on site) Without PCI

with the 10 Gb FCoE short reach optics or TwinAx cables

with 7101687(7101688) 11 2CPU:41

8 Gb FC PCIe, QLogic, Dual Port SG-PCIE2FC-QF8-Z

(SG-XPCIE2FC-QF8-

Maximum number mounted

expansion unit

With PCI expansion unit

4CPU:71

11 2CPU:41

4CPU:71

8 Gb FC PCIe, QLogic, Single Port SG-PCIE1FC-QF8-Z

(SG-XPCIE1FC-QF8-

11 2CPU:41

4CPU:71

8 Gb FC PCIe, Emulex, Dual Port SG-PCIE2FC-EM8-

Z(SG-XPCIE2FC-

11 2CPU:41

4CPU:71

EM8-N)

8 Gb FC PCIe, Emulex, Single Port SG-PCIE1FC-EM8-

Z(SG-XPCIE1FC-

11 2CPU:41

4CPU:71

EM8-N)

SAS Sun Storage 6 Gb SAS PC

ports, external

Ie HBA: 8

SG-SAS6-EXT-Z (7105387,SGX-SAS6-

11 2CPU:41

4CPU:71

EXT-Z)

Sun StorageTek 8-port External SAS PCI-Express Host Bus Adapter

SG-PCIE8SAS-E-ZN(SG-XPCIE8SAS-

11 2CPU:41

4CPU:71

E-Z-N)

FLASH Flash Accelerator F80 PCIe Card:

800GB, eMLC

7107091(7107092) 11 2CPU:41

4CPU:71

Flash Accelerator F40 card 7104480(7104482) 11 2CPU:41

4CPU:71

IB Oracle Dual port QDR InfiniBand

Adapter M3

7104073(7104074) 2CPU:3(#0,#3,

#7)(*1) 4CPU:6(#0,#1, #3,#5,#7,#9)

2CPU:2(#0,#3, #7)(*1) 4CPU:5(#0,#1, #3,#5,#7,#9) PCI expansion unit mounting not possible

Sun InfiniBand QDR Host Channel Adapter PCIe: low profile

4242A(X4242A) 11 2CPU:41

4CPU:71

Chapter 2　PCI Card Mounting Rules for the SPARC M10-4 25

Page 34

2.2.2 If XCP2050 or later is used and Oracle Solaris 10 is installed on all the domains or if XCP2050 or later

used and Oracle Solaris 11 and Oracle Solaris

are mixed

Table 2-3

Type Product name Product ID Maximum number mounted

Link PCI expansion unit connection card SPME8LK1F - 2CPU:3(#0,#3,

LAN Dual Gigabit Ethernet card (MMF) SP1X7GD2F 11 2CPU:41

Maximum number of each type of mounted PCI card: SPARC M10-4 with either Oracle Solaris 10

the mixture of Oracle Solaris 10 and 11 (Fujitsu product ID)

Without PCI expansion unit

Dual Gigabit Ethernet card (MMF) SP1X7GD1F 11 2CPU:41

Quad Gigabit Ethernet card (UTP) SP1X7GQ2F 11 2CPU:41

Quad Gigabit Ethernet card (UTP) SP1X7GQ1F 11 2CPU:41

Dual 10Gigabit Ethernet card (10GBase-T)

Dual 10Gigabit Ethernet card SE1X7HE3G 11 (*1) 2CPU:2(#0,#3,

SP1X7HF1F 11 (*1) 2CPU:2(#0,#3,

With PCI expansion unit

#7) 4CPU:6(#0,#1, #3,#5,#7,#9)

4CPU:71

#7) 4CPU:5(#0,#1, #3,#5,#7,#9) PCI expansion unit mounting not possible

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201426

Page 35

Table 2-3

Type Product name Product ID Maximum number mounted

FCoE Dual 10Gbps FCoE card (for optical

Maximum number of each type of mounted PCI card: SPARC M10-4 with either Oracle Solaris 10

the mixture of Oracle Solaris 10 and 11 (Fujitsu product ID) (continu ed)

Without PCI expansion unit

With PCI expansion unit

SE0X7EF12F 11 (*1) 2CPU:2(#0,#3,

cable)

#7) 4CPU:5(#0,#1, #3,#5,#7,#9) PCI expansion unit mounting not possible

Dual 10Gbps FCoE card (for Copper Twinax cable)

SE0X7EC12F 11 (*1) 2CPU:2(#0,#3,

#7) 4CPU:5(#0,#1, #3,#5,#7,#9) PCI expansion unit mounting not possible

Dual-channel 10Gbps FCoE card (for optical cable) (QLogic)

SP1X7FAR2F 11 (*1) 2CPU:2(#0,#3,

#7) 4CPU:5(#0,#1, #3,#5,#7,#9) PCI expansion unit mounting not possible

Dual-channel 10Gbps FCoE card

or Copper Twinax cable) (QLogic)

SP1X7FAS2F 11 (*1) 2CPU:2(#0,#3,

#7) 4CPU:5(#0,#1, #3,#5,#7,#9) PCI expansion unit mounting not possible

Chapter 2　PCI Card Mounting Rules for the SPARC M10-4 27

Page 36

Table 2-3

Type Product name Product ID Maximum number mounted

Maximum number of each type of mounted PCI card: SPARC M10-4 with either Oracle Solaris 10

the mixture of Oracle Solaris 10 and 11 (Fujitsu product ID) (continued)

Dual-channel 10Gbps FCoE card (for optical cable) (Emulex)

Without PCI expansion unit

SP1X7FBR2F 2CPU:3(#0,#3,

#7)(*2)

4CPU:11

With PCI expansion unit

2CPU:2(#0,#3, #7) 4CPU:5(#0,#1, #3,#5,#7,#9) PCI expansion unit mounting not possible

Dual-channel 10Gbps FCoE card (for Copper Twinax cable) (Emulex)

SP1X7FBS2F 2CPU:3(#0,#3,

#7)(*2) 4CPU:11

2CPU:2(#0,#3, #7) 4CPU:5(#0,#1, #3,#5,#7,#9) PCI expansion unit mounting not possible

FC Dual-channel 16Gbps Fibre

Channel card (SR SFP+)

Dual-channel 16Gbps Fibre Channel card (LR SFP+)

Dual-channel 16Gbps Fib Channel card (SR SFP+)

SP1X7FAA2F 11 2CPU:41

4CPU:71

SP1X7FAB2F 11 2CPU:41

4CPU:71

SP1X7FBA2F 11 2CPU:2(#0,#3,

#7) 4CPU:5(#0,#1, #3,#5,#7,#9) PCI expansion unit mounting not possible

Dual-channel 8Gbps Fibre Channel card (QLogic)

Single-channel 8Gbps Fibre Channel card (QLogic)

SE0X7F22F 11 2CPU:41

4CPU:71

SE0X7F21F 11 2CPU:41

4CPU:71

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201428

Page 37

Table 2-3

Type Product name Product ID Maximum number mounted

Maximum number of each type of mounted PCI card: SPARC M10-4 with either Oracle Solaris 10

the mixture of Oracle Solaris 10 and 11 (Fujitsu product ID) (continu ed)

Dual-channel 8Gbps Fibre Channel card (Emulex)

Without PCI expansion unit

SE0X7F32F 11 2CPU:2(#0,#3,

With PCI expansion unit

#7) 4CPU:5(#0,#1, #3,#5,#7,#9) PCI expansion unit mounting not possible

Single-channel 8Gbps Fibre Channel card (Emulex)

SE0X7F31F 11 2CPU:2(#0,#3,

#7) 4CPU:5(#0,#1, #3,#5,#7,#9) PCI expansion unit mounting not possible

SAS 6Gbps SAS card SE0X7SA2F 11 2CPU:41

4CPU:71

SAS card SE0X7SA1F 11 2CPU:41

4CPU:71

FLASH Flash Accelerator F80 card SP1X7Y21F 11 2CPU:41

4CPU:71

Flash Accelerator F40 card SP1X7Y11F 11 2CPU:41

4CPU:71

IB Dual Port InfiniBand 4x QDR card SP1X7BA12F 2CPU:3(#0,#3,

#7)(*3) 4CPU:6(#0,#1, #3,#5,#7,#9)

2CPU:2(#0,#3, #7)(*3) 4CPU:5(#0,#1, #3,#5,#7,#9) PCI expansion unit

ing not

mount possible

Dual Port InfiniBand 4x QDR card SE1X7BA12F 11 2CPU:41

4CPU:71

Chapter 2　PCI Card Mounting Rules for the SPARC M10-4 29

Page 38

Table 2-3

Type Product name Product ID Maximum number mounted

Maximum number of each type of mounted PCI card: SPARC M10-4 with either Oracle Solaris 10

the mixture of Oracle Solaris 10 and 11 (Fujitsu product ID) (continued)

Without PCI expansion unit

With PCI expansion unit

Graphic Graphics card SP0X7GR1F 1(#1) 1(#1)

PCI expansion unit mounting not possible

*1 If JumboFrame is used in a 2-CPU configuration, the maximum number of mounted PCI cards is 7 and the available PCI slots are Slot#0, #1, #2, #3, #4, #7, and #8. *2 If JumboFrame is used in a 2-CPU configuration, this card cannot be mounted. *3 If this card is mounted in Sl be used. If this card is mounted in Slot#7, Slot#9 and #10 cannot be used.

ot#0 in a 2-CPU configuration, Slot#2 cannot be used. If this card is mounted in Slot#3, Slot#5 and #6 cannot

Table 2-4

Type Product name For mounting before shipment

Maximum number of each type of mounted PCI card: SPARC M10-4 with either Oracle Solaris 10

the mixture of Oracle Solaris 10 and 11 (Oracle product ID)

from factory

(For installation on site) Without PCI

Maximum number mounted

expansion unit

With PCI expansion unit

Link Link card kit 7105513(7105576) - 2CPU:3(#0,#3,

#7) 4CPU:6(#0,#1, #3,#5,#7,#9)

LAN Sun Dual Port GbE PCIe2.0

LowProfileAdapter,MMF

Sun Quad PortGbE PCIe2.0 LowProfile Adapter,UTP

7100482(7100481) 11 2CPU:41

4CPU:71

7100479(7100477) 11 2CPU:41

4CPU:71

Sun Dual Port 10GBase-T Adapter 7100563(7100488) 11 (*1) 2CPU:2(#0,#3,

#7) 4CPU:5(#0,#1, #3,#5,#7,#9) PCI expansion unit mounting not possible

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201430

Page 39

Table 2-4

Type Product name For mounting before shipment

Maximum number of each type of mounted PCI card: SPARC M10-4 with either Oracle Solaris 10

the mixture of Oracle Solaris 10 and 11 (Oracle product ID) (continued)

from factory

(For installation on site) Without PCI

Sun Dual 10GbE SFP+ PCIe 2.0 Low Profile Adapter

PCIe Quad port GigE (copper) x8 lane card

1109A-Z(X1109A-Z) 11 (*1) 2CPU:2(#0,#3,

4447A-Z-N(X4447AZ-N)

PCI-E Low-Profile Dual GigE MMF 7281A-2-N(X7281A-

2-N)

FC/FCoE

Sun Storage 10 GbE PCIe FCoE Converged Network Adapter: QLogic low profile, dual port and

optics

SG-PCIEFCOE2-QSR(7105381,SGXPCIEFCOE2-Q-SR)

Maximum number mounted

expansion unit

With PCI expansion unit

#7) 4CPU:5(#0,#1, #3,#5,#7,#9) PCI expansion unit mounting not possible

11 (*1) 2CPU:2(#0,#3,

#7) 4CPU:5(#0,#1, #3,#5,#7,#9) PCI expansion unit mounting not possible

11 (*1) 2CPU:2(#0,#3,

#7) 4CPU:5(#0,#1, #3,#5,#7,#9) PCI expansion unit mounting not possible

11 (*1) 2CPU:2(#0,#3,

#7) 4CPU:5(#0,#1, #3,#5,#7,#9) PCI expansion unit mounting not possible

Chapter 2　PCI Card Mounting Rules for the SPARC M10-4 31

Page 40

Table 2-4

Type Product name For mounting before shipment

Maximum number of each type of mounted PCI card: SPARC M10-4 with either Oracle Solaris 10

the mixture of Oracle Solaris 10 and 11 (Oracle product ID) (continued)

from factory

(For installation on site) Without PCI

Sun Storage 10 GbE PCIe FCoE Converged Network Adapter: QLogic low profile, dual port and Twin-AX

Sun Storage 16Gb Fibre Channel PCIe Universal Host Bus Adapter, Qlogic

with the 16 Gb FC short wave optics

with the 16 Gb FC lo optics

ng wave

with the 10 Gb FCoE short reach optics or TwinAx cables

Sun Storage 16Gb Fibre Channel PCIe Universal Host Bus Adapter, Emulex

with the 16 Gb FC short wave optics

SG-PCIEFCOE2-QTA(7105382,SGXPCIEFCOE2-Q-TA)

7101673(7101674) - -

with 7101675(7101676) 11 2CPU:41

with 7101679(7101680) 11 2CPU:41

with 7101677(7101678)

TwinAx cables

7101683(7101684) - -

with 7101685(7101686) 11 2CPU:2(#0,#3,

Maximum number mounted

expansion unit

With PCI expansion unit

11 (*1) 2CPU:2(#0,#3,

#7) 4CPU:5(#0,#1, #3,#5,#7,#9) PCI expansion unit mounting not possible

4CPU:71

11 (*1) 2CPU:2(#0,#3,

#7) 4CPU:5(#0,#1, #3,#5,#7,#9) PCI expansion unit mounting not possible

#7) 4CPU:5(#0,#1, #3,#5,#7,#9) PCI

xpansion

e unit mounting not possible

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201432

Page 41

Table 2-4

Type Product name For mounting before shipment

Maximum number of each type of mounted PCI card: SPARC M10-4 with either Oracle Solaris 10

the mixture of Oracle Solaris 10 and 11 (Oracle product ID) (continued)

from factory

(For installation on site) Without PCI

with the 10 Gb FCoE short reach optics or TwinAx cables

with 7101687(7101688) 2CPU:3(#0,#3,

8 Gb FC PCIe, QLogic, Dual Port SG-PCIE2FC-QF8-Z

(SG-XPCIE2FC-QF8N)

8 Gb FC PCIe, QLogic, Single Port SG-PCIE1FC-QF8-Z

(SG-XPCIE1FC-QF8N)

8 Gb FC PCIe, Emulex, Dual Port SG-PCIE2FC-EM8-

Z(SG-XPCIE2FCEM8-N)

8 Gb FC PCIe, Emulex, Single Port SG-PCIE1FC-EM8-

Z(SG-XPCIE1FCEM8-N)

SAS Sun Storage 6 Gb SAS PCIe HBA: 8

ports, external

SG-SAS6-EXT-Z (7105387,SGX-SAS6EXT-Z)

Sun StorageTek 8-port External SAS PCI-Express Host Bus Adapter

SG-PCIE8SAS-E-ZN(SG-XPCIE8SASE-Z-N)

FLASH Flash Accelerator F80 PCIe Card:

800GB, eMLC

7107091(7107092) 11 2CPU:41

Maximum number mounted

expansion unit

With PCI expansion unit

2CPU:2(#0,#3, #7)(*2) 4CPU:11

#7)

4CPU:5(#0,#1,

#3,#5,#7,#9)

PCI

expansion

unit

mounting not

possible

11 2CPU:41

4CPU:71

11 2CPU:41

4CPU:71

11 2CPU:2(#0,#3,

#7)

4CPU:5(#0,#1,

#3,#5,#7,#9)

PCI

expansion

unit

mounting no

possible

11 2CPU:2(#0,#3,

#7)

4CPU:5(#0,#1,

#3,#5,#7,#9)

PCI

expansion

unit

mounting not

possible

11 2CPU:41

4CPU:71

11 2CPU:41

4CPU:71

Chapter 2　PCI Card Mounting Rules for the SPARC M10-4 33

Page 42

Table 2-4

Type Product name For mounting before shipment

Maximum number of each type of mounted PCI card: SPARC M10-4 with either Oracle Solaris 10

the mixture of Oracle Solaris 10 and 11 (Oracle product ID) (continued)

from factory

(For installation on site) Without PCI

Maximum number mounted

expansion unit

With PCI expansion unit

Flash Accelerator F40 card 7104480(7104482) 11 2CPU:41

4CPU:71

IB Oracle Dual port QDR InfiniBand

Adapter M3

7104073(7104074) 2CPU:3(#0,#3,

#7)(*3)

4CPU:6(#0,#1,

#3,#5,#7,#9)

2CPU:2(#0,#3, #7)(*3) 4CPU:5(#0,#1, #3,#5,#7,#9) PCI expansion unit mounting not possible

Sun InfiniBand QDR Host Channel Adapter PCIe: low profile

ot#0 in a 2-CPU configuration, Slot#2 cannot be used. If this card is mounted in Slot#3, Slot#5 and #6 cannot

4242A(X4242A) 11 2CPU:41

4CPU:71

2.2.3 XCP2044 or earlier

Table 2-5

Type Product name Product ID Maximum number mounted

Link PCI expansion unit connection card SPME8LK1F - 2CPU:3(#0,#3,

LAN Dual Gigabit Ethernet card (MMF) SP1X7GD2F 11 2CPU:41

Maximum number of each type of mounted PCI card: SPARC M10-4 with XCP2044 or earlier

(Fujitsu product ID)

Without PCI expansion unit

Dual Gigabit Ethernet card (MMF) SP1X7GD1F 11 2CPU:41

Quad Gigabit Ethernet card (UTP) SP1X7GQ2F 11 2CPU:41

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201434

With PCI expansion unit

#7) 4CPU:6(#0,#1, #3,#5,#7,#9)

4CPU:71

Page 43

Table 2-5

Type Product name Product ID Maximum number mounted

Maximum number of each type of mounted PCI card: SPARC M10-4 with XCP2044 or earlier (Fujitsu product ID) (continued)

Without PCI expansion unit

With PCI

expansion unit

Quad Gigabit Ethernet card (UTP) SP1X7GQ1F 11 2CPU:41

4CPU:71

Dual 10Gigabit Ethernet card (10GBase-T)

SP1X7HF1F 2CPU:3(#0,#3,

#7) 4CPU:6(#0,#1, #3,#5,#7,#9)

2CPU:2(#0,#3,

#7)

4CPU:5(#0,#1,

#3,#5,#7,#9)

PCI

expansion

unit

mounting not

possible

Dual 10Gigabit Ethernet card SE1X7HE3G 2CPU:3(#0,#3,

#7) 4CPU:6(#0,#1, #3,#5,#7,#9)

2CPU:2(#0,#3,

#7)

4CPU:5(#0,#1,

#3,#5,#7,#9)

PCI

expansion

unit

mounting not

possible

FCoE Dual 10Gbps FCoE card (for optical

cable)

SE0X7EF12F 2CPU:3(#0,#3,

#7) 4CPU:6(#0,#1, #3,#5,#7,#9)

2CPU:2(#0,#3,

#7)

4CPU:5(#0,#1,

#3,#5,#7,#9)

PCI

expansion

unit

mounting not

possible

Dual 10Gbps FCoE card ( Copper Twinax cable)

for

SE0X7EC12F 2CPU:3(#0,#3,

#7) 4CPU:6(#0,#1, #3,#5,#7,#9)

2CPU:2(#0,#3,

#7)

4CPU:5(#0,#1,

#3,#5,#7,#9)

PCI

expansion

unit

mounting not

possible

Chapter 2　PCI Card Mounting Rules for the SPARC M10-4 35

Page 44

Table 2-5

Type Product name Product ID Maximum number mounted

Maximum number of each type of mounted PCI card: SPARC M10-4 with XCP2044 or earlier

(Fujitsu product ID) (continued)

Without PCI expansion unit

Dual-channel 10Gbps FCoE card (for optical cable) (QLogic)

SP1X7FAR2F 2CPU:3(#0,#3,

#7)

4CPU:6(#0,#1,

#3,#5,#7,#9)

With PCI expansion unit

2CPU:2(#0,#3, #7) 4CPU:5(#0,#1, #3,#5,#7,#9) PCI expansion unit mounting not possible

Dual-channel 10Gbps FCoE card (for Copper Twinax cable) (QLogic)

SP1X7FAS2F 2CPU:3(#0,#3,

#7) 4CPU:6(#0,#1, #3,#5,#7,#9)

2CPU:2(#0,#3, #7) 4CPU:5(#0,#1, #3,#5,#7,#9) PCI expansion unit mounting not possible

Dual-channel 10Gbps FCoE card (for optical cable) (Emulex)

SP1X7FBR2F 2CPU:3(#0,#3,

#7) 4CPU:6(#0,#1, #3,#5,#7,#9)

2CPU:2(#0,#3, #7) 4CPU:5(#0,#1, #3,#5,#7,#9) PCI expansion unit mounting not

ossible

Dual-channel 10Gbps FCoE card (for Copper Twinax cable) (Emulex)

SP1X7FBS2F 2CPU:3(#0,#3,

#7) 4CPU:6(#0,#1, #3,#5,#7,#9)

2CPU:2(#0,#3, #7) 4CPU:5(#0,#1, #3,#5,#7,#9) PCI expansion unit mounting not possible

FC Dual-channel 16Gbps Fibre

Channel card (SR SFP+)

Dual-channel 16Gbps Fibre Channel card (LR SFP+)

SP1X7FAA2F 11 2CPU:41

4CPU:71

SP1X7FAB2F 11 2CPU:41

4CPU:71

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201436

Page 45

Table 2-5

Type Product name Product ID Maximum number mounted

Maximum number of each type of mounted PCI card: SPARC M10-4 with XCP2044 or earlier (Fujitsu product ID) (continued)

Without PCI expansion unit

Dual-channel 16Gbps Fibre Channel card (SR SFP+)

SP1X7FBA2F 2CPU:3(#0,#3,

#7) 4CPU:6(#0,#1, #3,#5,#7,#9)

With PCI

expansion unit

2CPU:2(#0,#3,

#7)

4CPU:5(#0,#1,

#3,#5,#7,#9)

PCI

expansion

unit

mounting not

possible

Dual-channel 8Gbps Fibre Channel card (QLogic)

Single-channel 8Gbps Fibre Channel card (QLogic)

Dual-channel 8Gbps Fibre Channel card (Emulex)

SE0X7F22F 11 2CPU:41

4CPU:71

SE0X7F21F 11 2CPU:41

4CPU:71

SE0X7F32F 2CPU:3(#0,#3,

#7) 4CPU:6(#0,#1, #3,#5,#7,#9)

2CPU:2(#0,#3,

#7)

4CPU:5(#0,#1,

#3,#5,#7,#9)

PCI

expansion

unit

mounting not

possible

Single-channel 8Gbps Fibre Channel card (Emulex)

SE0X7F31F 2CPU:3(#0,#3,

#7) 4CPU:6(#0,#1,

,#5,#7,#9)

2CPU:2(#0,#3,

#7)

4CPU:5(#0,#1,

#3,#5,#7,#9)

PCI

expansion

unit

mounting not

possible

SAS 6Gbps SAS card SE0X7SA2F 11 2CPU:41

4CPU:71

SAS card SE0X7SA1F 11 2CPU:41

4CPU:71

FLASH Flash Accelerator F80 card SP1X7Y21F 11 2CPU:41

4CPU:71

Flash Accelerator F40 card SP1X7Y11F 11 2CPU:41

4CPU:71

Chapter 2　PCI Card Mounting Rules for the SPARC M10-4 37

Page 46

Table 2-5

Type Product name Product ID Maximum number mounted

IB Dual Port InfiniBand 4x QDR card SP1X7BA12F 2CPU:3(#0,#3,

Maximum number of each type of mounted PCI card: SPARC M10-4 with XCP2044 or earlier

(Fujitsu product ID) (continued)

Without PCI expansion unit

#7)(*1)

4CPU:6(#0,#1,

#3,#5,#7,#9)

With PCI expansion unit

2CPU:2(#0,#3, #7)(*1) 4CPU:5(#0,#1, #3,#5,#7,#9) PCI expansion unit mounting not possible

Dual Port InfiniBand 4x QDR card SE1X7BA12F 11 2CPU:41

4CPU:71

Graphic Graphics card SP0X7GR1F 1(#1) 1(#1)

PCI expansion unit mounting not possible

Table 2-6

Type Product name For mounting before shipment

Maximum number of each type of mounted PCI card: SPARC M10-4 with XCP2044 or earlier

(Oracle product ID)

from factory

(For installation on site) Without PCI

Maximum number mounted

expansion unit

With PCI expansion unit

Link Link card kit 7105513(7105576) - 2CPU:3(#0,#3,

#7) 4CPU:6(#0,#1, #3,#5,#7,#9)

LAN Sun Dual Port GbE PCIe2.0

LowProfileAdapter,MMF

Sun Quad PortGbE PCIe2.0 LowProfile Adapter,UTP

7100482(7100481) 11 2CPU:41

4CPU:71

7100479(7100477) 11 2CPU:41

4CPU:71

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201438

Page 47

Table 2-6

Type Product name For mounting before shipment

Maximum number of each type of mounted PCI card: SPARC M10-4 with XCP2044 or earlier (Oracle product ID) (continued)

from factory

(For installation on site) Without PCI

Sun Dual Port 10GBase-T Adapter 7100563(7100488) 2CPU:3(#0,#3,

Sun Dual 10GbE SFP+ PCIe 2.0 Low Profile Adapter

PCIe Quad port GigE (copper) x8 lane card

PCI-E Low-Profile Dua

l GigE MMF 7281A-2-N(X7281A-

1109A-Z(X1109A-Z) 2CPU:3(#0,#3,

4447A-Z-N(X4447AZ-N)

2-N)

Maximum number mounted

expansion unit

With PCI

expansion unit

2CPU:2(#0,#3, #7) 4CPU:6(#0,#1, #3,#5,#7,#9)

#7)

4CPU:5(#0,#1,

#3,#5,#7,#9)

PCI

expansion

unit

mounting not

possible

2CPU:2(#0,#3, #7) 4CPU:6(#0,#1, #3,#5,#7,#9)

#7)

4CPU:5(#0,#1,

#3,#5,#7,#9)

PCI

expansion

unit

mounting not

possible

2CPU:3(#0,#3, #7) 4CPU:6(#0,#1, #3,#5,#7,#9)

2CPU:2(#0,#3,

#7)

4CPU:5(#0,#1,

#3,#5,#7,#9)

PCI

expansion

unit

mounting not

possible

2CPU:3(#0,#3, #7) 4CPU:6(#0,#1, #3,#5,#7,#9)

2CPU:2(#0,#3,

#7)

4CPU:5(#0,#1,

#3,#5,#7,#9)

PCI

expansion

unit

mounting not

possible

Chapter 2　PCI Card Mounting Rules for the SPARC M10-4 39

Page 48

Table 2-6

Type Product name For mounting before shipment

FC/FCoE

Maximum number of each type of mounted PCI card: SPARC M10-4 with XCP2044 or earlier

(Oracle product ID) (continu ed)

from factory

(For installation on site) Without PCI

Sun Storage 10 GbE PCIe FCoE Converged Network Adapter: QLogic low profile, dual port and

optics

Sun Storage 10 GbE PCIe FCoE Converged Network Adapter: QLogic low profile, dual port and Twin-AX

Sun Storage 16Gb Fibre Channel PCIe Universal Host Bus Adapter, Qlogic

with the 16 Gb FC short wave optics

with the 16 Gb FC long wave optics

with the 10 Gb FCoE short reach optics or TwinAx cables

Sun Storage 16Gb Fibre Channel PCIe Universal Host Bus Adapter, Emulex

SG-PCIEFCOE2-QSR(7105381,SGXPCIEFCOE2-Q-SR)

SG-PCIEFCOE2-QTA(7105382,SGXPCIEFCOE2-Q-TA)

7101673(7101674) - -

with 7101675(7101676) 11 2CPU:41

with 7101679(7101680) 11 2CPU:41

with 7101677(7101678)

TwinAx cables

7101683(7101684) - -

Maximum number mounted

expansion unit

2CPU:3(#0,#3,

#7)

4CPU:6(#0,#1,

#3,#5,#7,#9)

With PCI expansion unit

2CPU:2(#0,#3, #7) 4CPU:5(#0,#1, #3,#5,#7,#9) PCI expansion unit mounting not possible

2CPU:3(#0,#3,

#7)

4CPU:6(#0,#1,

#3,#5,#7,#9)

2CPU:2(#0,#3, #7) 4CPU:5(#0,#1, #3,#5,#7,#9) PCI expansion unit mo possible

4CPU:71

2CPU:3(#0,#3, #7) 4CPU:6(#0,#1, #3,#5,#7,#9)

2CPU:2(#0,#3, #7) 4C

PU:5(#0,#1, #3,#5,#7,#9) PCI expansion unit mounting not possible

unting not

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201440

Page 49

Table 2-6

Type Product name For mounting before shipment

Maximum number of each type of mounted PCI card: SPARC M10-4 with XCP2044 or earlier (Oracle product ID) (continued)

from factory

(For installation on site) Without PCI

with the 16 Gb FC short wave optics

with the 10 Gb FCoE short reach optics or TwinAx cables

with 7101685(7101686) 2CPU:3(#0,#3,

with 7101687(7101688) 2CPU:3(#0,#3,

8 Gb FC PCIe, QLogic, Dual Port SG-PCIE2FC-QF8-Z

(SG-XPCIE2FC-QF8N)

8 Gb FC PCIe, QL

ogic, Single Port SG-PCIE1FC-QF8-Z

(SG-XPCIE1FC-QF8-

8 Gb FC PCIe, Emulex, Dual Port SG-PCIE2FC-EM8-

Z(SG-XPCIE2FCEM8-N)

8 Gb FC PCIe, Emulex, Single Port SG-PCIE1FC-EM8-

Z(SG-XPCIE1FCEM8-N)

Maximum number mounted

expansion unit

With PCI expansion unit

2CPU:2(#0,#3, #7) 4CPU:6(#0,#1, #3,#5,#7,#9)

#7)

4CPU:5(#0,#1,

#3,#5,#7,#9)

PCI

expansion

unit

mounting not

possible

2CPU:2(#0,#3, #7) 4CPU:6(#0,#1, #3,#5,#7,#9)

#7)

4CPU:5(#0,#1,

#3,#5,#7,#9)

PCI

expansion

unit

mounting not

possible

11 2CPU:41

4CPU:71

11 2CPU:41

4CPU:71

2CPU:3(#0,#3, #7) 4CPU:6(#0,#1, #3,#5,#7,#9)

2CPU:2(#0,#3,

#7)

4CPU:5(#0,#1,

#3,#5,#7,#9)

PCI

expansion

unit

mounting not

possible

2CPU:3(#0,#3, #7) 4CPU:6(#0,#1, #3,#5,#7,#9)

2CPU:2(#0,#3,

#7)

4CPU:5(#0,#1,

#3,#5,#7,#9)

PCI

expansion

unit

mounting not

possible

Chapter 2　PCI Card Mounting Rules for the SPARC M10-4 41

Page 50

Table 2-6

Type Product name For mounting before shipment

SAS Sun Storage 6 Gb SAS PCIe HBA: 8

FLASH Flash Accelerator F80 PCIe Card:

IB Oracle Dual port QDR InfiniBand

Maximum number of each type of mounted PCI card: SPARC M10-4 with XCP2044 or earlier

(Oracle product ID) (continu ed)

from factory

(For installation on site) Without PCI

SG-SAS6-EXT-Z

ports, external

Sun StorageTek 8-port External SAS PCI-Express Host Bus Adapter

800GB, eMLC

Flash Accelerator F40 card 7104480(7104482) 11 2CPU:41

Adapter M3

Sun InfiniBand QDR Host Channel Adapter PCIe: low profile

(7105387,SGX-SAS6EXT-Z)

SG-PCIE8SAS-E-ZN(SG-XPCIE8SASE-Z-N)

7107091(7107092) 11 2CPU:41

7104073(7104074) 2CPU:3(#0,#3,

4242A(X4242A) 11 2CPU:41

Maximum number mounted

expansion unit

11 2CPU:41

#7)(*1) 4CPU:6(#0,#1, #3,#5,#7,#9)

With PCI expansion unit

4CPU:71

2CPU:2(#0,#3, #7)(*1) 4CPU:5(#0,#1, #3,#5,#7,#9) PCI expansion unit mounting not possible

4CPU:71

2.3 Relationship between the CPU Configuration and the Number of Root Complexes

The 2-CPU configuration of the SPARC M10-4 consists of four root complexes, and the 4-CPU configuration consists of four or eight root complexes. A root complex consists of an I/O controller mounted on a processor and the PCI switches, PCI

devices, etc. under the I/O controller.

The number of root complexes when a CP

the default value of 4, by default. In this case, the system configuration can be kept as

since the I/O bus is not reconfigured, but the PCI card mounting rules are also kept,

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

U memory unit is installed on site is kept at

July 201442

･

Page 51

they are the same as those for the 2-CPU configuration.

To change the number of root complexes to eight, the system administrator needs to change the XSCF settings to reconfigure the I/O bus reconfiguration. For details on how to configure the I/O bus, see "I/O bus reconfiguration (ioreconfigure)" in the

jitsu M10/SPARC M10 Systems XSCF Reference Manual. Changing the number of

root complexes to eight increases the maximum number of mounted PCI cards. However, because device path names change with the reconfiguration of the I/O bus, system reconfiguration such as to set a device path name again may be required for an

y device path names used by applications.

Table 2-7

Number of CPUs2444

Number of root complexes

Relationship between the CPU configuration and the number of root complexes

Order for M10-4 only Order for CPU memory unit

Ordered together with M10-4 (installed at factory)

4848

Ordered separately from M10-4 (installed on site)

Without I/O bus reconfiguration

With I/O bus reconfiguration

Figure 2-1 is a hardware configuration diagram of the SPARC M10-4 with two CPUs. Figure 2-2 is a hardware configuration diagram of the SPARC M10-4 with four CPUs

(four root complexes). Figure 2-3 is a hardware configuration diagram of the SPARC

M10-4 with fo

ur CPUs (eight root complexes).

Chapter 2　PCI Card Mounting Rules for the SPARC M10-4 43

Page 52

Figure 2-1

Hardware configuration diagram of the SPARC M10-4 with 2 CPUs

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201444

Page 53

Figure 2-2

Hardware configuration diagram of the SPARC M10-4 with 4 root complexes

Chapter 2　PCI Card Mounting Rules for the SPARC M10-4 45

Page 54

Figure 2-3

Hardware configuration diagram of the SPARC M10-4 with 8 root complexes

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201446

Page 55

Chapter 3

PCI Card Mounting Rules for the SPARC M10-4S

This chapter describes the maximum number of each type of mounted PCI card and the rules for mounting PCI cards in PCI slots when mounting PCI cards in the SPARC M10-4S. Be sure to observe these mounting rules when designing the system and when installing a PCI card or changing the mounting location of a PCI card

■

Prerequisites

Maximum Number of Each Type of Mounted PCI Card and Available PCI Slots

Relationship between the CPU Configuration and the Number of Root Complexes

3.1 Prerequisites

■

Domain OS

■

System firmware XCP version

■

Number of CPUs and number of root complexes

3.1.1 Domain OS

I/O root domain, and I/O domain are Oracle So

mixture of the two. If an Oracle Solaris 10 environment is used in the following configurations, apply the rules for Oracle Solaris 11.

■

A guest domain of an Oracle Solaris 10 environment is configured using the virtual I/O services of a control domain or the I/O root domain of Oracle Solaris

11.

laris 11 only, Oracle Solaris 10 only, or

Page 56

■

An Oracle Solaris 10 zone is configured on an Oracle Solaris 11 domain.

If there are plans to add an I/O root domain or I/O domain of Oracle Solaris 10 after the start of system operation, apply the rules for Oracle Solaris 10.

Note -

For details on the design of control domain, I/O root domain, and I/O domain

configurations, see the Fujitsu M10/SPARC M10 Systems Domain Configuration Guide.

3.1.2 System firmware XCP version

The maximum number of each type of mounted PCI card and the slots available for mounting may vary depending on the system firmware version. For XCP2050 or later, see the tables in "3.2.1 If XCP2050 or later is used and Oracle Solaris 11 is

installed on all the domains" and "3. Solaris 10 is installed on all the domains or if XCP2050 or later is used and Oracle Solaris 11 and Oracle Solaris 10 are mixed" according to the Oracle Solaris version.

For XCP2044 or earlier, see "3.2.3 XCP2044 or earlier" r Solaris version.

2.2 If XCP2050 or later is used and Oracle

egardless of the Oracle

3.1.3 Number of CPUs and number of root complexes

A root complex consists of an I/O controller mounted on a processor and the PCI switches, PCI devices, etc. under the I/O controller. For details, see "3.3 Relationship between the CPU Configuration and the Number

Root Complexes."

The maximum number of each type of mounted PCI card and the available PCI sl vary depending on the number of root complexes. The number of root complexes of the SPARC M10-4S is as follows according to the CPU configuration.

■

For a 2-CPU configuration, four root complexes

■

For a 4-CPU configuration, four or seven root complexes

Note -

For cases where a CPU module is installed after the installation of the equipment with a change from the 2-CPU configuration to the 4-CPU configuration, the recommended configuration is the one with four root complexes. This configuration inherits the I/O bus configuration and mounting rules of the 2-CPU configuration. Changing the conf into one with seven root complexes increases the maximum number of mounted PCI cards. However, system reconfiguration is required because the I/O bus is reconfigured.

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

ots

iguration

July 201448

Page 57

3.2 Maximum Number of Each Type of Mounted PCI Card and Available PCI Slots

For the maximum number of each type of mounted PCI card and the available PCI slots, see Table 3-1 to Table 3-6 according to the domain OS version.

■

"Maximum number mounted" means the maximum number of PCI cards that can

mounted in the SPARC M10-4S or PCI expansion unit. The numbers in ( ) indicate the slot numbers where cards can be mounted, among the PCI slots of the SPARC M10-4S. If there are no ( ), all of the sl any PCI expansion unit where cards can be mounted, all of the slots are available for mounting.

■

"2CPU" and "4CPU" under "Maximum number mounted" in the tables refer to the following cases.

- 2CPU: Configuration with 4 root complexes

In one case, a CPU memory unit has not been installed. In another case, a CPU memory unit has been installed on site, and the I/O bus has not been reconfigured.

- 4C

PU: Configuration with 7 root complexes In one case, a CPU memory unit has been ordered together with the server (installed at the factory). In another case, a CPU memory unit has been installed on site and the I/O bus has been reconfigured.

■

The SPARC M10 has an I/O bandwidth of 8 GB/s per root complex. The bandwidth between the PCI expansion unit and the SPARC M10 is also 8 GB/s. The PCI cards mounted in the PCI expansion unit share that bandwidth, which caps the performance of all the PCI cards operating at the sam high-speed communication card requires a certain level of performance, mount the card in a PCI slot in the SPARC M10-4S instead of mounting it in the PCI expansion unit.

ots are available for mounting. In

e time. If a

Chapter 3　PCI Card Mounting Rules for the SPARC M10-4S 49

Page 58

3.2.1 If XCP2050 or later is used and Oracle Solaris 11 is installed on all the domains

Table 3-1

Type Product name Product ID Maximum number mounted

Link PCI expansion unit connection card SPME8LK1F - 2CPU:3(#0,#3,

LAN Dual Gigabit Ethernet card (MMF) SP1X7GD2F 8 2CPU:38

FCoE Dual 10Gbps FCoE card (for optical

FC Dual-channel 16Gbps Fibre

Maximum number of each type of mounted PCI card: SPARC M10-4S with Oracle Solaris 11

(Fujitsu product ID)

Without PCI expansion unit

Dual Gigabit Ethernet card (MMF) SP1X7GD1F 8 2CPU:38

Quad Gigabit Ethernet card (UTP) SP1X7GQ2F 8 2CPU:38

Quad Gigabit Ethernet card (UTP) SP1X7GQ1F 8 2CPU:38

Dual 10Gigabit Ethernet card (10GBase-T)

Dual 10Gigabit Ethernet card SE1X7HE3G 8 2CPU:38

cable)

Dual 10Gbps FCoE card (for Copper Twinax cable)

Dual-channel 10Gbps FCoE card (for optical cable) (QLogic)

Dual-channel 10Gbps FCoE card (for Copper Twinax cable) (QLogic)

Dual-channel 10Gbps FCoE card (for optical cable) (Emulex)

Dual-channel 10Gbps FCoE card (for Copper Twinax cable) (Emulex)

Channel card (SR SFP+)

Dual-channel 16Gbps Fibre Channel card (LR SFP+)

SP1X7HF1F 8 2CPU:38

SE0X7EF12F 8 2CPU:38

SE0X7EC12F 8 2CPU:38

SP1X7FAR2F 8 2CPU:38

SP1X7FAS2F 8 2CPU:38

SP1X7FBR2F 8 2CPU:38

SP1X7FBS2F 8 2CPU:38

SP1X7FAA2F 8 2CPU:38

P1X7FAB2F 8 2CPU:38

With PCI expansion unit

#7) 4CPU:5(#0,#1, #3,#5,#7)

4CPU:58

PU:58

4CPU:58

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201450

Page 59

Table 3-1

Type Product name Product ID Maximum number mounted

Maximum number of each type of mounted PCI card: SPARC M10-4S with Oracle Solaris 11 (Fujitsu product ID) (continued)

Without PCI expansion unit

Dual-channel 16Gbps Fibre Channel card (SR SFP+)

Dual-channel 8Gbps Fibre Channel card (QLogic)

Single-channel 8Gbps Fibre Channel card (QLogic)

Dual-channel 8Gbps Fibre Channel card (Emulex)

Single-channel 8Gbps Fibre Channel card (Emulex)

SP1X7FBA2F 8 2CPU:38

SE0X7F22F 8 2CPU:38

SE0X7F21F 8 2CPU:38

SE0X7F32F 8 2CPU:38

SE0X7F31F 8 2CPU:38

With PCI expansion unit

4CPU:58

SAS 6Gbps SAS card SE0X7SA2F 8 2CPU:38

4CPU:58

SAS card SE0X7SA1F 8 2CPU:38

4CPU:58

FLASH Flash Accelerator F80 card SP1X7Y21F 8 2CPU:38

4CPU:58

Flash Accelerator F40 card SP1X7Y11F 8 2CPU:38

4CPU:58

IB Dual Port InfiniBand 4x QDR c

ard SP1X7BA12F 2CPU:3(#0,#3,

#7)(*1) 4CPU:5(#0,#1, #3,#5,#7)

2CPU:2(#0,#3, #7)(*1) 4CPU:4(#0,#1, #3,#5,#7) PCI expansion unit mounting not possible

Dual Port InfiniBand 4x QDR card SE1X7BA12F 8 2CPU:38

4CPU:58

Graphic Graphics card SP0X7GR1F - -

*1 If this card is mounted in Slot#0 in a 2-CPU configuration, Slot#2 cannot be used. If this card is mounted in Slot#3, Slot#5 and #6 cannot be used.

Chapter 3　PCI Card Mounting Rules for the SPARC M10-4S 51

Page 60

Table 3-2

Type Product name For mounting before shipment

Maximum number of each type of mounted PCI card: SPARC M10-4S with Oracle Solaris 11

(Oracle product ID)

from factory

(For installation on site) Without PCI

Maximum number mounted

expansion unit

With PCI expansion unit

Link Link card kit 7105513(7105576) - 2CPU:3(#0,#3,

#7) 4CPU:5(#0,#1, #3,#5,#7)

LAN Sun Dual Port GbE PCIe2.0

LowProfileAdapter,MMF

Sun Quad PortGbE PCIe2.0 LowProfile Adapter,UTP

7100482(7100481) 8 2CPU:38

4CPU:58

7100479(7100477) 8 2CPU:38

4CPU:58

Sun Dual Port 10GBase-T Adapter 7100563(7100488) 8 2CPU:38

4CPU:58

FC/FCoE

Sun Dual 10GbE SFP+ PCIe 2.0 Low Profile Adapter

PCIe Quad port GigE (copper) x8 lane card

PCI-E Low-Profile Dual GigE MMF 7281A-2-N(X7281A-

Sun Storage 10 GbE PCIe FCoE Converged Network Adapter: QLogic low profile, dual port and

optics

Sun Storage 10 GbE PCIe FCoE Converged Network Adapter: QLogic low profile, dual port and Twin-AX

Sun Storage 16Gb Fibre Channel PCIe Universal Host Bus Adapter, Qlogic

with the 16 Gb FC short wave optics

with the 16 Gb FC long wave optics

with the 10 Gb FCoE short reach optics or TwinAx cables

Sun Storage 16Gb Fibre Channel PCIe Universal Host Bus Adapter, Emulex

with the 16 Gb FC short wave optics

1109A-Z(X1109A-Z) 8 2CPU:38

4CPU:58

4447A-Z-N(X4447AZ-N)

8 2CPU:38

4CPU:58

8 2CPU:38

2-N)

SG-PCIEFCOE2-QSR(7105381,SG-

8 2CPU:38

4CPU:58

XPCIEFCOE2-Q-SR)

SG-PCIEFCOE2-QTA(7105382,SG-

8 2CPU:38

4CPU:58

XPCIEFCOE2-Q-TA)

7101673(7101674) - -

with 7101675(7101676) 8 2CPU:38

4CPU:58

with 7101679(7101680) 8 2CPU:38

4CPU:58

with 7101677(7101678)

TwinAx cables

8 2CPU:38

4CPU:58

7101683(7101684) - -

wit

h 7101685(7101686) 8 2CPU:38

4CPU:58

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201452

Page 61

Table 3-2

Type Product name For mounting before shipment

Maximum number of each type of mounted PCI card: SPARC M10-4S with Oracle Solaris 11 (Oracle product ID) (continued)

from factory

(For installation on site) Without PCI

with the 10 Gb FCoE short reach optics or TwinAx cables

with 7101687(7101688) 8 2CPU:38

8 Gb FC PCIe, QLogic, Dual Port SG-PCIE2FC-QF8-Z

Maximum number mounted

expansion unit

82CPU:38

(SG-XPCIE2FC-QF8-

With PCI expansion unit

4CPU:58

8 Gb FC PCIe, QLogic, Single Port SG-PCIE1FC-QF8-Z

(SG-XPCIE1FC-QF8-

82CPU:38

4CPU:58

8 Gb FC PCIe, Emulex, Dual Port SG-PCIE2FC-EM8-

Z(SG-XPCIE2FC-

82CPU:38

4CPU:58

EM8-N)

8 Gb FC PCIe, Emulex, Single Port SG-PCIE1FC-EM8-

Z(SG-XPCIE1FC-

82CPU:38

4CPU:58

EM8-N)

SAS Sun Storage 6 Gb SAS PC

ports, external

Ie HBA: 8

SG-SAS6-EXT-Z (7105387,SGX-SAS6-

82CPU:38

4CPU:58

EXT-Z)

Sun StorageTek 8-port External SAS PCI-Express Host Bus Adapter

SG-PCIE8SAS-E-ZN(SG-XPCIE8SAS-

82CPU:38

4CPU:58

E-Z-N)

FLASH Flash Accelerator F80 PCIe Card:

800GB, eMLC

7107091(7107092) 8 2CPU:38

4CPU:58

Flash Accelerator F40 card 7104480(7104482) 8 2CPU:38

4CPU:58

IB Oracle Dual port QDR InfiniBand

Adapter M3

7104073(7104074) 2CPU:3(#0,#3,

#7)(*1) 4CPU:5(#0,#1, #3,#5,#7)

2CPU:2(#0,#3, #7)(*1) 4CPU:4(#0,#1, #3,#5,#7) PCI expansion unit mounting not possible

Sun InfiniBand QDR Host Channel Adapter PCIe: low profile

*1 If this card is mounted in Slot#0 in a 2-CPU configuration, Slot#2 cannot be used. If this card is mounted in Slot#3, Slot#5 and #6 cannot be used.

4242A(X4242A) 8 2CPU:38

4CPU:58

Chapter 3　PCI Card Mounting Rules for the SPARC M10-4S 53

Page 62

3.2.2 If XCP2050 or later is used and Oracle Solaris 10 is installed on all the domains or if XCP2050 or later

used and Oracle Solaris 11 and Oracle Solaris

are mixed

Table 3-3

Type Product name Product ID Maximum number mounted

Link PCI expansion unit connection card SPME8LK1F - 2CPU:3(#0,#3,

LAN Dual Gigabit Ethernet card (MMF) SP1X7GD2F 8 2CPU:38

Maximum number of each type of mounted PCI card: SPARC M10-4S with either Oracle Solaris 10

the mixture of Oracle Solaris 10 and 11 (Fujitsu product ID)

Without PCI expansion unit

Dual Gigabit Ethernet card (MMF) SP1X7GD1F 8 2CPU:38

Quad Gigabit Ethernet card (UTP) SP1X7GQ2F 8 2CPU:38

Quad Gigabit Ethernet card (UTP) SP1X7GQ1F 8 2CPU:38

Dual 10Gigabit Ethernet card (10GBase-T)

Dual 10Gigabit Ethernet card SE1X7HE3G 8 (*1) 2CPU:2(#0,#3,

SP1X7HF1F 8 (*1) 2CPU:2(#0,#3,

With PCI expansion unit

#7) 4CPU:5(#0,#1, #3,#5,#7)

4CPU:58

#7) 4CPU:4(#0,#1, #3,#5,#7) PCI expansion unit mounting not possible

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201454

Page 63

Table 3-3

Type Product name Product ID Maximum number mounted

FCoE Dual 10Gbps FCoE card (for optical

Maximum number of each type of mounted PCI card: SPARC M10-4S with either Oracle Solaris 10

the mixture of Oracle Solaris 10 and 11 (Fujitsu product ID) (continu ed)

Without PCI expansion unit

With PCI expansion unit

SE0X7EF12F 8 (*1) 2CPU:2(#0,#3,

cable)

#7) 4CPU:4(#0,#1, #3,#5,#7) PCI expansion unit mounting not possible

Dual 10Gbps FCoE card (for Copper Twinax cable)

SE0X7EC12F 8 (*1) 2CPU:2(#0,#3,

#7) 4CPU:4(#0,#1, #3,#5,#7) PCI expansion unit mounting not possible

Dual-channel 10Gbps FCoE card (for optical cable) (QLogic)

SP1X7FAR2F 8 (*1) 2CPU:2(#0,#3,

#7) 4CPU:4(#0,#1, #3,#5,#7) PCI expansion unit mounting not possible

Dual-channel 10Gbps FCoE card

or Copper Twinax cable) (QLogic)

SP1X7FAS2F 8 (*1) 2CPU:2(#0,#3,

#7) 4CPU:4(#0,#1, #3,#5,#7) PCI expansion unit mounting not possible

Chapter 3　PCI Card Mounting Rules for the SPARC M10-4S 55

Page 64

Table 3-3

Type Product name Product ID Maximum number mounted

Maximum number of each type of mounted PCI card: SPARC M10-4S with either Oracle Solaris 10

the mixture of Oracle Solaris 10 and 11 (Fujitsu product ID) (continued)

Dual-channel 10Gbps FCoE card (for optical cable) (Emulex)

Without PCI expansion unit

SP1X7FBR2F 2CPU:3(#0,#3,

#7)(*2)

4CPU:8

With PCI expansion unit

2CPU:2(#0,#3, #7) 4CPU:4(#0,#1, #3,#5,#7) PCI expansion unit mounting not possible

Dual-channel 10Gbps FCoE card (for Copper Twinax cable) (Emulex)

SP1X7FBS2F 2CPU:3(#0,#3,

#7)(*2) 4CPU:8

2CPU:2(#0,#3, #7) 4CPU:4(#0,#1, #3,#5,#7) PCI expansion unit mounting not possible

FC Dual-channel 16Gbps Fibre

Channel card (SR SFP+)

Dual-channel 16Gbps Fibre Channel card (LR SFP+)

Dual-channel 16Gbps Fib Channel card (SR SFP+)

SP1X7FAA2F 8 2CPU:38

4CPU:58

SP1X7FAB2F 8 2CPU:38

4CPU:58

SP1X7FBA2F 8 2CPU:2(#0,#3,

#7) 4CPU:4(#0,#1, #3,#5,#7) PCI expansion unit mounting not possible

Dual-channel 8Gbps Fibre Channel card (QLogic)

Single-channel 8Gbps Fibre Channel card (QLogic)

SE0X7F22F 8 2CPU:38

4CPU:58

SE0X7F21F 8 2CPU:38

4CPU:58

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201456

Page 65

Table 3-3

Type Product name Product ID Maximum number mounted

Maximum number of each type of mounted PCI card: SPARC M10-4S with either Oracle Solaris 10

the mixture of Oracle Solaris 10 and 11 (Fujitsu product ID) (continu ed)

Dual-channel 8Gbps Fibre Channel card (Emulex)

Without PCI expansion unit

SE0X7F32F 8 2CPU:2(#0,#3,

With PCI expansion unit

#7) 4CPU:4(#0,#1, #3,#5,#7) PCI expansion unit mounting not possible

Single-channel 8Gbps Fibre Channel card (Emulex)

SE0X7F31F 8 2CPU:2(#0,#3,

#7) 4CPU:4(#0,#1, #3,#5,#7) PCI expansion unit mounting not possible

SAS 6Gbps SAS card SE0X7SA2F 8 2CPU:38

4CPU:58

SAS card SE0X7SA1F 8 2CPU:38

4CPU:58

FLASH Flash Accelerator F80 card SP1X7Y21F 8 2CPU:38

4CPU:58

Flash Accelerator F40 card SP1X7Y11F 8 2CPU:38

4CPU:58

IB Dual Port InfiniBand 4x QDR card SP1X7BA12F 2CPU:3(#0,#3,

#7)(*3) 4CPU:5(#0,#1, #3,#5,#7)

2CPU:2(#0,#3, #7)(*3) 4CPU:4(#0,#1, #3,#5,#7) PCI expansion unit

ing not

mount possible

Dual Port InfiniBand 4x QDR card SE1X7BA12F 8 2CPU:38

4CPU:58

Chapter 3　PCI Card Mounting Rules for the SPARC M10-4S 57

Page 66

Table 3-3

Type Product name Product ID Maximum number mounted

Maximum number of each type of mounted PCI card: SPARC M10-4S with either Oracle Solaris 10

the mixture of Oracle Solaris 10 and 11 (Fujitsu product ID) (continued)

Without PCI expansion unit

With PCI expansion unit

Graphic Graphics card SP0X7GR1F 1(#1) 1(#1)

PCI expansion unit mounting not possible

*1 If JumboFrame is used in a 2-CPU configuration, the maximum number of mounted PCI cards is 6 and the available PCI slots are Slot#0, #1, #2, #3, #4, and #7. *2 If JumboFrame is used in a 2-CPU configuration, this card cannot be mounted. *3 If this card is mounted in Slot#0 in a 2-CPU c be used.

onfiguration, Slot#2 cannot be used. If this card is mounted in Slot#3, Slot#5 and #6 cannot

Table 3-4

Type Product name For mounting before shipment

Maximum number of each type of mounted PCI card: SPARC M10-4S with either Oracle Solaris 10

the mixture of Oracle Solaris 10 and 11 (Oracle product ID)

from factory

(For installation on site) Without PCI

Maximum number mounted

expansion unit

With PCI expansion unit

Link Link card kit 7105513(7105576) - 2CPU:3(#0,#3,

#7) 4CPU:5(#0,#1, #3,#5,#7)

LAN Sun Dual Port GbE PCIe2.0

LowProfileAdapter,MMF

Sun Quad PortGbE PCIe2.0 LowProfile Adapter,UTP

7100482(7100481) 8 2CPU:38

4CPU:58

7100479(7100477) 8 2CPU:38

4CPU:58

Sun Dual Port 10GBase-T Adapter 7100563(7100488) 8 (*1) 2CPU:2(#0,#3,

#7) 4CPU:4(#0,#1, #3,#5,#7) PCI expansion unit mounting not possible

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201458

Page 67

Table 3-4

Type Product name For mounting before shipment

Maximum number of each type of mounted PCI card: SPARC M10-4S with either Oracle Solaris 10

the mixture of Oracle Solaris 10 and 11 (Oracle product ID) (continued)

from factory

(For installation on site) Without PCI

Sun Dual 10GbE SFP+ PCIe 2.0 Low Profile Adapter

PCIe Quad port GigE (copper) x8 lane card

1109A-Z(X1109A-Z) 8 (*1) 2CPU:2(#0,#3,

4447A-Z-N(X4447AZ-N)

PCI-E Low-Profile Dual GigE MMF 7281A-2-N(X7281A-

2-N)

FC/FCoE

Sun Storage 10 GbE PCIe FCoE Converged Network Adapter: QLogic low profile, dual port and

optics

SG-PCIEFCOE2-QSR(7105381,SGXPCIEFCOE2-Q-SR)

Maximum number mounted

expansion unit

With PCI expansion unit

#7) 4CPU:4(#0,#1, #3,#5,#7) PCI expansion unit mounting not possible

8 (*1) 2CPU:2(#0,#3,

#7) 4CPU:4(#0,#1, #3,#5,#7) PCI expansion unit mounting not possible

8 (*1) 2CPU:2(#0,#3,

#7) 4CPU:4(#0,#1, #3,#5,#7) PCI expansion unit mounting not possible

8 (*1) 2CPU:2(#0,#3,

#7) 4CPU:4(#0,#1, #3,#5,#7) PCI expansion unit mounting not possible

Chapter 3　PCI Card Mounting Rules for the SPARC M10-4S 59

Page 68

Table 3-4

Type Product name For mounting before shipment

Maximum number of each type of mounted PCI card: SPARC M10-4S with either Oracle Solaris 10

the mixture of Oracle Solaris 10 and 11 (Oracle product ID) (continued)

from factory

(For installation on site) Without PCI

Sun Storage 10 GbE PCIe FCoE Converged Network Adapter: QLogic low profile, dual port and Twin-AX

Sun Storage 16Gb Fibre Channel PCIe Universal Host Bus Adapter, Qlogic

with the 16 Gb FC short wave optics

with the 16 Gb FC lo optics

ng wave

with the 10 Gb FCoE short reach optics or TwinAx cables

Sun Storage 16Gb Fibre Channel PCIe Universal Host Bus Adapter, Emulex

with the 16 Gb FC short wave optics

SG-PCIEFCOE2-QTA(7105382,SGXPCIEFCOE2-Q-TA)

7101673(7101674) - -

with 7101675(7101676) 8 2CPU:38

with 7101679(7101680) 8 2CPU:38

with 7101677(7101678)

TwinAx cables

7101683(7101684) - -

with 7101685(7101686) 8 2CPU:2(#0,#3,

Maximum number mounted

expansion unit

With PCI expansion unit

8 (*1) 2CPU:2(#0,#3,

#7) 4CPU:4(#0,#1, #3,#5,#7) PCI expansion unit mounting not possible

4CPU:58

8 (*1) 2CPU:2(#0,#3,

#7) 4CPU:4(#0,#1, #3,#5,#7) PCI expansion unit mounting not possible

#7) 4CPU:4(#0,#1, #3,#5,#7) PCI

xpansion

e unit mounting not possible

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201460

Page 69

Table 3-4

Type Product name For mounting before shipment

Maximum number of each type of mounted PCI card: SPARC M10-4S with either Oracle Solaris 10

the mixture of Oracle Solaris 10 and 11 (Oracle product ID) (continued)

from factory

(For installation on site) Without PCI

with the 10 Gb FCoE short reach optics or TwinAx cables

with 7101687(7101688) 2CPU:3(#0,#3,

8 Gb FC PCIe, QLogic, Dual Port SG-PCIE2FC-QF8-Z

(SG-XPCIE2FC-QF8N)

8 Gb FC PCIe, QLogic, Single Port SG-PCIE1FC-QF8-Z

(SG-XPCIE1FC-QF8N)

8 Gb FC PCIe, Emulex, Dual Port SG-PCIE2FC-EM8-

Z(SG-XPCIE2FCEM8-N)

8 Gb FC PCIe, Emulex, Single Port SG-PCIE1FC-EM8-

Z(SG-XPCIE1FCEM8-N)

SAS Sun Storage 6 Gb SAS PCIe HBA: 8

ports, external

SG-SAS6-EXT-Z (7105387,SGX-SAS6EXT-Z)

Sun StorageTek 8-port External SAS PCI-Express Host Bus Adapter

SG-PCIE8SAS-E-ZN(SG-XPCIE8SASE-Z-N)

FLASH Flash Accelerator F80 PCIe Card:

800GB, eMLC

7107091(7107092) 8 2CPU:38

Maximum number mounted

expansion unit

With PCI expansion unit

2CPU:2(#0,#3, #7)(*2) 4CPU:8

#7)

4CPU:4(#0,#1,

#3,#5,#7)

PCI

expansion

unit

mounting not

possible

82CPU:38

4CPU:58

82CPU:38

4CPU:58

8 2CPU:2(#0,#3,

#7)

4CPU:4(#0,#1,

#3,#5,#7)

PCI

expansion

unit

mounting no

possible

8 2CPU:2(#0,#3,

#7)

4CPU:4(#0,#1,

#3,#5,#7)

PCI

expansion

unit

mounting not

possible

82CPU:38

4CPU:58

82CPU:38

4CPU:58

Chapter 3　PCI Card Mounting Rules for the SPARC M10-4S 61

Page 70

Table 3-4

Type Product name For mounting before shipment

Maximum number of each type of mounted PCI card: SPARC M10-4S with either Oracle Solaris 10

the mixture of Oracle Solaris 10 and 11 (Oracle product ID) (continued)

from factory

(For installation on site) Without PCI

Maximum number mounted

expansion unit

With PCI expansion unit

Flash Accelerator F40 card 7104480(7104482) 8 2CPU:38

4CPU:58

IB Oracle Dual port QDR InfiniBand

Adapter M3

7104073(7104074) 2CPU:3(#0,#3,

#7)(*3)

4CPU:5(#0,#1,

#3,#5,#7)

2CPU:2(#0,#3, #7)(*3) 4CPU:4(#0,#1, #3,#5,#7) PCI expansion unit mounting not possible

Sun InfiniBand QDR Host Channel Adapter PCIe: low profile

onfiguration, Slot#2 cannot be used. If this card is mounted in Slot#3, Slot#5 and #6 cannot

4242A(X4242A) 8 2CPU:38

4CPU:58

3.2.3 XCP2044 or earlier

Table 3-5

Type Product name Product ID Maximum number mounted

Link PCI expansion unit connection card SPME8LK1F - 2CPU:3(#0,#3,

LAN Dual Gigabit Ethernet card (MMF) SP1X7GD2F 8 2CPU:38

Maximum number of each type of mounted PCI card: SPARC M10-4S with XCP2044 or earlier

(Fujitsu product ID)

Without PCI expansion unit

Dual Gigabit Ethernet card (MMF) SP1X7GD1F 8 2CPU:38

Quad Gigabit Ethernet card (UTP) SP1X7GQ2F 8 2CPU:38

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201462

With PCI expansion unit

#7) 4CPU:5(#0,#1, #3,#5,#7)

4CPU:58

Page 71

Table 3-5

Type Product name Product ID Maximum number mounted

Maximum number of each type of mounted PCI card: SPARC M10-4S with XCP2044 or earlier (Fujitsu product ID) (continued)

Without PCI expansion unit

With PCI

expansion unit

Quad Gigabit Ethernet card (UTP) SP1X7GQ1F 8 2CPU:38

4CPU:58

Dual 10Gigabit Ethernet card (10GBase-T)

SP1X7HF1F 2CPU:3(#0,#3,

#7) 4CPU:5(#0,#1, #3,#5,#7)

2CPU:2(#0,#3,

#7)

4CPU:4(#0,#1,

#3,#5,#7)

PCI

expansion

unit

mounting not

possible

Dual 10Gigabit Ethernet card SE1X7HE3G 2CPU:3(#0,#3,

#7) 4CPU:5(#0,#1, #3,#5,#7)

2CPU:2(#0,#3,

#7)

4CPU:4(#0,#1,

#3,#5,#7)

PCI

expansion

unit

mounting not

possible

FCoE Dual 10Gbps FCoE card (for optical

cable)

SE0X7EF12F 2CPU:3(#0,#3,

#7) 4CPU:5(#0,#1, #3,#5,#7)

2CPU:2(#0,#3,

#7)

4CPU:4(#0,#1,

#3,#5,#7)

PCI

expansion

unit

mounting not

possible

Dual 10Gbps FCoE card ( Copper Twinax cable)

for

SE0X7EC12F 2CPU:3(#0,#3,

#7) 4CPU:5(#0,#1, #3,#5,#7)

2CPU:2(#0,#3,

#7)

4CPU:4(#0,#1,

#3,#5,#7)

PCI

expansion

unit

mounting not

possible

Chapter 3　PCI Card Mounting Rules for the SPARC M10-4S 63

Page 72

Table 3-5

Type Product name Product ID Maximum number mounted

Maximum number of each type of mounted PCI card: SPARC M10-4S with XCP2044 or earlier

(Fujitsu product ID) (continued)

Without PCI expansion unit

Dual-channel 10Gbps FCoE card (for optical cable) (QLogic)

SP1X7FAR2F 2CPU:3(#0,#3,

#7)

4CPU:5(#0,#1,

#3,#5,#7)

With PCI expansion unit

2CPU:2(#0,#3, #7) 4CPU:4(#0,#1, #3,#5,#7) PCI expansion unit mounting not possible

Dual-channel 10Gbps FCoE card (for Copper Twinax cable) (QLogic)

SP1X7FAS2F 2CPU:3(#0,#3,

#7) 4CPU:5(#0,#1, #3,#5,#7)

2CPU:2(#0,#3, #7) 4CPU:4(#0,#1, #3,#5,#7) PCI expansion unit mounting not possible

Dual-channel 10Gbps FCoE card (for optical cable) (Emulex)

SP1X7FBR2F 2CPU:3(#0,#3,

#7) 4CPU:5(#0,#1, #3,#5,#7)

2CPU:2(#0,#3, #7) 4CPU:4(#0,#1, #3,#5,#7) PCI expansion unit mounting not

ossible

Dual-channel 10Gbps FCoE card (for Copper Twinax cable) (Emulex)

SP1X7FBS2F 2CPU:3(#0,#3,

#7) 4CPU:5(#0,#1, #3,#5,#7)

2CPU:2(#0,#3, #7) 4CPU:4(#0,#1, #3,#5,#7) PCI expansion unit mounting not possible

FC Dual-channel 16Gbps Fibre

Channel card (SR SFP+)

Dual-channel 16Gbps Fibre Channel card (LR SFP+)

SP1X7FAA2F 8 2CPU:38

4CPU:58

SP1X7FAB2F 8 2CPU:38

4CPU:58

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201464

Page 73

Table 3-5

Type Product name Product ID Maximum number mounted

Maximum number of each type of mounted PCI card: SPARC M10-4S with XCP2044 or earlier (Fujitsu product ID) (continued)

Without PCI expansion unit

Dual-channel 16Gbps Fibre Channel card (SR SFP+)

SP1X7FBA2F 2CPU:3(#0,#3,

#7) 4CPU:5(#0,#1, #3,#5,#7)

With PCI

expansion unit

2CPU:2(#0,#3,

#7)

4CPU:4(#0,#1,

#3,#5,#7)

PCI

expansion

unit

mounting not

possible

Dual-channel 8Gbps Fibre Channel card (QLogic)

Single-channel 8Gbps Fibre Channel card (QLogic)

Dual-channel 8Gbps Fibre Channel card (Emulex)

SE0X7F22F 8 2CPU:38

4CPU:58

SE0X7F21F 8 2CPU:38

4CPU:58

SE0X7F32F 2CPU:3(#0,#3,

#7) 4CPU:5(#0,#1, #3,#5,#7)

2CPU:2(#0,#3,

#7)

4CPU:4(#0,#1,

#3,#5,#7)

PCI

expansion

unit

mounting not

possible

Single-channel 8Gbps Fibre Channel card (Emulex)

SE0X7F31F 2CPU:3(#0,#3,

#7) 4CPU:5(#0,#1,

,#5,#7)

2CPU:2(#0,#3,

#7)

4CPU:4(#0,#1,

#3,#5,#7)

PCI

expansion

unit

mounting not

possible

SAS 6Gbps SAS card SE0X7SA2F 8 2CPU:38

4CPU:58

SAS card SE0X7SA1F 8 2CPU:38

4CPU:58

FLASH Flash Accelerator F80 card SP1X7Y21F 8 2CPU:38

4CPU:58

Flash Accelerator F40 card SP1X7Y11F 8 2CPU:38

4CPU:58

Chapter 3　PCI Card Mounting Rules for the SPARC M10-4S 65

Page 74

Table 3-5

Type Product name Product ID Maximum number mounted

IB Dual Port InfiniBand 4x QDR card SP1X7BA12F 2CPU:3(#0,#3,

Maximum number of each type of mounted PCI card: SPARC M10-4S with XCP2044 or earlier

(Fujitsu product ID) (continued)

Without PCI expansion unit

#7)(*1)

4CPU:5(#0,#1,

#3,#5,#7)

With PCI expansion unit

2CPU:2(#0,#3, #7)(*1) 4CPU:4(#0,#1, #3,#5,#7) PCI expansion unit mounting not possible

Dual Port InfiniBand 4x QDR card SE1X7BA12F 8 2CPU:38

4CPU:58

Graphic Graphics card SP0X7GR1F 1(#1) 1(#1)

PCI expansion unit mounting not possible

*1 If this card is mounted in Slot#0 in a 2-CPU configuration, Slot#2 cannot be used. If this card is mounted in Slot#3, Slot#5 and #6 cannot be used.

Table 3-6

Type Product name For mounting before shipment

Maximum number of each type of mounted PCI card: SPARC M10-4S with XCP2044 or earlier

(Oracle product ID)

from factory

(For installation on site) Without PCI

Maximum number mounted

expansion unit

With PCI expansion unit

Link Link card kit 7105513(7105576) - 2CPU:3(#0,#3,

#7) 4CPU:5(#0,#1, #3,#5,#7)

LAN Sun Dual Port GbE PCIe2.0

LowProfileAdapter,MMF

Sun Quad PortGbE PCIe2.0 LowProfile Adapter,UTP

7100482(7100481) 8 2CPU:38

4CPU:58

7100479(7100477) 8 2CPU:38

4CPU:58

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201466

Page 75

Table 3-6

Type Product name For mounting before shipment

Maximum number of each type of mounted PCI card: SPARC M10-4S with XCP2044 or earlier (Oracle product ID) (continued)

from factory

(For installation on site) Without PCI

Sun Dual Port 10GBase-T Adapter 7100563(7100488) 2CPU:3(#0,#3,

Sun Dual 10GbE SFP+ PCIe 2.0 Low Profile Adapter

PCIe Quad port GigE (copper) x8 lane card

PCI-E Low-Profile Dua

l GigE MMF 7281A-2-N(X7281A-

1109A-Z(X1109A-Z) 2CPU:3(#0,#3,

4447A-Z-N(X4447AZ-N)

2-N)

Maximum number mounted

expansion unit

With PCI

expansion unit

2CPU:2(#0,#3, #7) 4CPU:5(#0,#1, #3,#5,#7)

#7)

4CPU:4(#0,#1,

#3,#5,#7)

PCI

expansion

unit

mounting not

possible

2CPU:2(#0,#3, #7) 4CPU:5(#0,#1, #3,#5,#7)

#7)

4CPU:4(#0,#1,

#3,#5,#7)

PCI

expansion

unit

mounting not

possible

2CPU:3(#0,#3, #7) 4CPU:5(#0,#1, #3,#5,#7)

2CPU:2(#0,#3,

#7)

4CPU:4(#0,#1,

#3,#5,#7)

PCI

expansion

unit

mounting not

possible

2CPU:3(#0,#3, #7) 4CPU:5(#0,#1, #3,#5,#7)

2CPU:2(#0,#3,

#7)

4CPU:4(#0,#1,

#3,#5,#7)

PCI

expansion

unit

mounting not

possible

Chapter 3　PCI Card Mounting Rules for the SPARC M10-4S 67

Page 76

Table 3-6

Type Product name For mounting before shipment

FC/FCoE

Maximum number of each type of mounted PCI card: SPARC M10-4S with XCP2044 or earlier

(Oracle product ID) (continu ed)

from factory

(For installation on site) Without PCI

Sun Storage 10 GbE PCIe FCoE Converged Network Adapter: QLogic low profile, dual port and

optics

Sun Storage 10 GbE PCIe FCoE Converged Network Adapter: QLogic low profile, dual port and Twin-AX

Sun Storage 16Gb Fibre Channel PCIe Universal Host Bus Adapter, Qlogic

with the 16 Gb FC short wave optics

with the 16 Gb FC long wave optics

with the 10 Gb FCoE short reach optics or TwinAx cables

Sun Storage 16Gb Fibre Channel PCIe Universal Host Bus Adapter, Emulex

SG-PCIEFCOE2-QSR(7105381,SGXPCIEFCOE2-Q-SR)

SG-PCIEFCOE2-QTA(7105382,SGXPCIEFCOE2-Q-TA)

7101673(7101674) - -

with 7101675(7101676) 8 2CPU:38

with 7101679(7101680) 8 2CPU:38

with 7101677(7101678)

TwinAx cables

7101683(7101684) - -

Maximum number mounted

expansion unit

2CPU:3(#0,#3,

#7)

4CPU:5(#0,#1,

#3,#5,#7)

With PCI expansion unit

2CPU:2(#0,#3, #7) 4CPU:4(#0,#1, #3,#5,#7) PCI expansion unit mounting not possible

2CPU:3(#0,#3,

#7)

4CPU:5(#0,#1,

#3,#5,#7)

2CPU:2(#0,#3, #7) 4CPU:4(#0,#1, #3,#5,#7) PCI expansion unit mo possible

4CPU:58

2CPU:3(#0,#3, #7) 4CPU:5(#0,#1, #3,#5,#7)

2CPU:2(#0,#3, #7) 4C

PU:4(#0,#1, #3,#5,#7) PCI expansion unit mounting not possible

unting not

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201468

Page 77

Table 3-6

Type Product name For mounting before shipment

Maximum number of each type of mounted PCI card: SPARC M10-4S with XCP2044 or earlier (Oracle product ID) (continued)

from factory

(For installation on site) Without PCI

with the 16 Gb FC short wave optics

with the 10 Gb FCoE short reach optics or TwinAx cables

with 7101685(7101686) 2CPU:3(#0,#3,

with 7101687(7101688) 2CPU:3(#0,#3,

8 Gb FC PCIe, QLogic, Dual Port SG-PCIE2FC-QF8-Z

(SG-XPCIE2FC-QF8N)

8 Gb FC PCIe, QL

ogic, Single Port SG-PCIE1FC-QF8-Z

(SG-XPCIE1FC-QF8-

8 Gb FC PCIe, Emulex, Dual Port SG-PCIE2FC-EM8-

Z(SG-XPCIE2FCEM8-N)

8 Gb FC PCIe, Emulex, Single Port SG-PCIE1FC-EM8-

Z(SG-XPCIE1FCEM8-N)

Maximum number mounted

expansion unit

With PCI expansion unit

2CPU:2(#0,#3, #7) 4CPU:5(#0,#1, #3,#5,#7)

#7)

4CPU:4(#0,#1,

#3,#5,#7)

PCI

expansion

unit

mounting not

possible

2CPU:2(#0,#3, #7) 4CPU:5(#0,#1, #3,#5,#7)

#7)

4CPU:4(#0,#1,

#3,#5,#7)

PCI

expansion

unit

mounting not

possible

82CPU:38

4CPU:58

82CPU:38

4CPU:58

2CPU:3(#0,#3, #7) 4CPU:5(#0,#1, #3,#5,#7)

2CPU:2(#0,#3,

#7)

4CPU:4(#0,#1,

#3,#5,#7)

PCI

expansion

unit

mounting not

possible

2CPU:3(#0,#3, #7) 4CPU:5(#0,#1, #3,#5,#7)

2CPU:2(#0,#3,

#7)

4CPU:4(#0,#1,

#3,#5,#7)

PCI

expansion

unit

mounting not

possible

Chapter 3　PCI Card Mounting Rules for the SPARC M10-4S 69

Page 78

Table 3-6

Type Product name For mounting before shipment

SAS Sun Storage 6 Gb SAS PCIe HBA: 8

FLASH Flash Accelerator F80 PCIe Card:

IB Oracle Dual port QDR InfiniBand

*1 If this card is mounted in Slot#0 in a 2-CPU configuration, Slot#2 cannot be used. If this card is mounted in Slot#3, Slot#5 and #6 cannot be used.

Maximum number of each type of mounted PCI card: SPARC M10-4S with XCP2044 or earlier

(Oracle product ID) (continu ed)

from factory

(For installation on site) Without PCI

SG-SAS6-EXT-Z

ports, external

Sun StorageTek 8-port External SAS PCI-Express Host Bus Adapter

800GB, eMLC

Flash Accelerator F40 card 7104480(7104482) 8 2CPU:38

Adapter M3

Sun InfiniBand QDR Host Channel Adapter PCIe: low profile

(7105387,SGX-SAS6EXT-Z)

SG-PCIE8SAS-E-ZN(SG-XPCIE8SASE-Z-N)

7107091(7107092) 8 2CPU:38

7104073(7104074) 2CPU:3(#0,#3,

4242A(X4242A) 8 2CPU:38

Maximum number mounted

expansion unit

8 2CPU:38

#7)(*1) 4CPU:5(#0,#1, #3,#5,#7)

With PCI expansion unit

4CPU:58

2CPU:2(#0,#3, #7)(*1) 4CPU:4(#0,#1, #3,#5,#7) PCI expansion unit mounting not possible

4CPU:58

3.3 Relationship between the CPU Configuration and the Number of Root Complexes

The 2-CPU configuration of the SPARC M10-4S consists of four root complexes, and the 4-CPU configuration consists of four or seven root complexes. A root complex consists of an I/O controller mounted on a processor and the PCI switches, PCI

devices, etc. under the I/O controller.

The number of root complexes when a CP

the default value of 4, by default. In this case, the system configuration can be kept as

since the I/O bus is not reconfigured, but the PCI card mounting rules are also kept,

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

U memory unit is installed on site is kept at

July 201470

･

Page 79

they are the same as those for the 2-CPU configuration.

To change to the number of root complexes to seven, the system administrator needs

change the XSCF settings to reconfigure the I/O bus. For details on how to

configure the I/O bus, see "I/O bus reconfiguration (ioreconfigure)" in the Fu M10/SPARC M10 Systems XSCF Reference Manual. Changing the number of root complexes to seven increases the maximum number of mounted PCI cards. However, because device path names change with the reconfiguration of the I/O bus, system

reconfiguration such as to set a device path name again may be required fo

device path names used by applications.

jitsu

r any

Table 3-7

Number of CPUs2444

Number of root complexes

Relationship between the CPU configuration and the number of root complexes

Order for M10-4S only Order for CPU memory unit

Ordered together with M10-4S (installed at factory)

4747

Ordered separately from M10-4S (installed on site)

Without I/O bus reconfiguration

With I/O bus reconfiguration

Figure 3-1 is a hardware configuration diagram of the SPARC M10-4S with two

CPUs. Figure 3-2 is a hardware configuration diagram of the SPARC M10-4S with

four CPUs (four root complexes). Figure 3-3 is a hardware configuration diagram of

the SPARC M10-4S with fo

ur CPUs (seven root complexes).

Chapter 3　PCI Card Mounting Rules for the SPARC M10-4S 71

Page 80

Figure 3-1

Hardware configuration diagram of the SPARC M10-4S with 2 CPUs

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201472

Page 81

Figure 3-2

Hardware configuration diagram of the SPARC M10-4S with 4 CPUs

root complexes)

Chapter 3　PCI Card Mounting Rules for the SPARC M10-4S 73

Page 82

Figure 3-3

Hardware configuration diagram of the SPARC M10-4S with 4 CPUs

root complexes)

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201474

Page 83

Chapter 4

Factory-default Mounting Order of PCI Cards

This chapter describes the factory-default mounting order of PCI cards. PCI cards ordered together with a SPARC M10 system or PCI expansion unit are mounted in each chassis according to the rules described in this chapter and shipped

from the factory.

PCI cards are classified into groups A, B, and C, and m mounting priority (from highest to lowest) shown in Table 4-1 or Table 4-2. In the PCI slots of the SPARC M10-1, the PCI cards of each group are mounted in the PCI slot order shown in the corresponding column of Table 4-3. In the PCI slots of th PCI slot order shown in the corresponding column of Table 4-4. In the PCI slots of the SPARC M10-4S, the PCI cards of each group are mounted in the PCI slot order shown in the corresponding c In the PCI slots in the PCI expansion unit, the PCI cards are mounted in the order shown in Table 4-6.

ounted in the order of

e SPARC M10-4, the PCI cards of each group are mounted in the

olumn of Table 4-5.

Table 4-1

Group Product name Product ID Mounting priority

APCI

CGraphics

ADual

A Dual-channel 10Gbps FCoE card (for

ADual

Mounting priority order of PCI cards (Fujitsu product ID)

expansion unit connection card SPME8LK1F High

card SP0X7GR1F |

Port InfiniBand 4x QDR card SP1X7BA12F |

SP1X7FBR2F |

optical cable)

SP1X7FBS2F |

Copper Twinax cable)

SP1X7FAR2F |

optical cable)

SP1X7FAS2F |

Copper Twinax cable)

10Gbps FCoE card (for optical cable) SE0X7EF12F |

10Gbps FCoE

Twinax cable)

card (f

or Copper

SE0X7EC12F |

order

Page 84

Table 4-1

Group Product name Product ID Mounting priority

ADual

A Dual-channel 16Gbps Fibre Channel card

Mounting priority order of PCI cards (Fujitsu product ID) (continu ed)

10Gigabit Ethernet card SE1X7HE3G |

10Gigabit Ethernet card (10GBase-T) SP1X7HF1F |

SP1X7FBA2F |

(SR SFP+)

order

A Dual-channel 8Gbps Fibre Channel card SE0X7F32F |

A Single-channel 8Gbps Fibre Channel card SE0X7F31F Low

BDual

B Dual-channel 16Gbps Fibre Channel card

BFlash

Port InfiniBand 4x QDR card SE1X7BA12F High

SP1X7FAA2F |

(SR SFP+)

SP1X7FAB2F |

(LR SFP+)

Accelerator F80 card SP1X7Y21F |

Accelerator F40 ca

rd SP1X7Y11F |

B Dual-channel 8Gbps Fibre Channel card SE0X7F22F |

B 6Gbps SAS card SE0X7SA2F |

B Single-channel 8Gbps Fibre Channel card SE0X7F21F |

BSAS card SE0X7SA1F |

BQuad

BDual

Gigabit Ethernet card (UTP) SP1X7GQ2F |

Gigabit Ethernet card (UTP) SP1X7GQ1F |

Gigabit Ethernet card (MMF) SP1X7GD2F |

Gigabit Ethernet card (MMF) SP1X7GD1F Low

Table 4-2

Group Product name ATO product ID Mounting priority

ALink

A Oracle Dual Port QDR InfiniBand Adapter

ASun

Mounting priority order of PCI cards (Oracle product ID)

card kit

7105513 High

7104073 |

Storage 16Gb Fibre Channel PCIe Universal Host Bus Adapter, Emulex (with FCoE transceivers or TwinAx cables)

Storage 16Gb Fibre Channel PCIe Universal Host Bus Adapter, QLogic (with FCoE transceivers or TwinAx cables)

Storage 10 GbE PCIe FCoE Converged Network Adapter: QLogic low profile, dual port and SR optics

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

7101683 (with FCoE transceivers or no transceiver)

7101673 (with FC

transceiver)

SG-PCIEFCOE2-Q-SR |

oE transceivers or no

July 201476

･

order

Page 85

Table 4-2

Group Product name ATO product ID Mounting priority

ASun

APCI-E

ASun

BSun

B Flash Accelerator F80 PCIe Card: 800GB,

B Flash Accelerator F40 PCIe Card: 400GB,

BSun

Mounting priority order of PCI cards (Oracle product ID) (continu ed)

Storage 10 GbE PCIe FCoE Converged Network Adapter: QLogic low profile, dual port and Twin-AX

Dual 10GbE SFP+ PCIe 2.0 Low Profile Adapter

Dual Port 10GBase-T Adapter

PCIe Quad port GigE (copper) x8 lane card

Low-Profile Dual GigE MMF, low profile bracket on board, stand bracket included

Universal Host Bus Adapter, Emulex (with 16Gb FC transceivers)

PCIe

Universal Host Bus Adapter, QLogic (with 16Gb FC transceivers)

Storage 16Gb Fibre Channel PCIe

Gb FC

PCIe, Emulex, Dual Port

Gb FC

PCIe, Emulex, Single Port

InfiniBand QDR Ho

Storage 16Gb Fibre Channel PCIe

st Channel Adapter

SG-PCIEFCOE2-Q-TA |

1109A-Z |

7100563 |

4447A-Z-N |

7281A-2-N |

7101683 (with 16Gb FC transceivers)

SG-PCIE2FC-EM8-Z |

SG-PCIE1FC-EM8-Z Low

4242A High

7101673 (with 16Gb FC transceivers)

7107091 |

eMLC

7104480 |

eMLC

Gb FC

PCIe, QLogic, Dual Port

Storage 6 Gb SAS

external

PCI-Express Host Bus Adapter

Adapter, UTP

Adapter, MMF

Gb FC

PCIe, QLogic, Single Port

StorageTek 8-port External SAS

Quad Port GbE PCIe 2.0 Low Profile

Dual Port GbE PCIe 2.0 Low Profile

Ie HBA: 8 ports,

SG-PCIE2FC-QF8-Z |

SG-SAS6-EXT-Z |

SG-PCIE1FC-QF8-Z |

SG-PCIE8SAS-E-Z-N |

7100479 |

7100482 Low

order

Chapter 4　Factory-default Mounting Order of PCI Cards 77

Page 86

Table 4-3

PCI slot number Group A Group B Group C Group A Group B Group C

Mounting order of PCI slots of SPARC M10-1

Mounting order of PCI slots (*)

For Oracle Solaris 11 or for Oracle Solaris 10 without PCI expansion unit connection cards ordered together

For Oracle Solaris 10 with PCI expansion unit connection cards ordered together

Slot#0 2nd 2nd - 2nd 2nd -

Slot#1 1st 3rd - 1st 3rd -

Slot#2 3rd 1st 1st - 1st 1st

*1 The version of Oracle Solaris must comply with the version of the preinstalled OS.

Table 4-4

PCI slot number Group A Group B Group C Group A:

Mounting order of PCI slots of SPARC M10-4

Mounting order of PCI slots (*1) (*3)

For Oracle Solaris 11 or for Oracle Solaris 10 without PCI expansion unit connection cards ordered together (*2)

For Oracle Solaris 10 with PCI expansion unit connection cards ordered together

2CPU

Group A: 4CPU

Group B Group C

Slot#0 1st 11th - 1st 1st 11th -

Slot#1 4th 8th 1st - 4th 8th 1st

Slot#29th3rd---3rd-

Slot#3 2nd 10th - 2nd 2nd 10th -

Slot#47th5th---5th-

Slot#5 5th 7th - - 5th 7th -

Slot#610th2nd---2nd-

Slot#7 3rd 9th - 3rd 3rd 9th -

Slot#88th4th---4th-

Slot#9 6th 6th - - 6th 6th -

Slot#1011th1st---1st-

*1 The version of Oracle Solaris must comply with the version of the preinstalled OS. *2 The cards below may be shipped after being mounted in slots that become unavailable for mounting when JamboFrame is used. In that case, move the cards to available slots. [LAN] SP1X7HF1F, SE1X7HE3G

7100563, 1109A-Z, 4447A-Z-N, 7281A-2-N

[FCoE] S

E0X7EF12F, SE0X7EC12F, SP1X7FAR2F, SP1X7FAS2F

SG-PCIEFCOE2-Q-SR,SG-PCIEFCOE2-Q-TA

7101673 (with FCoE transceiver or no transceiver)

7101683 (with FCoE transceiver or no transceiver) *3 In a 2-CPU configuration with the Dual Port InfiniBand 4x QDR card (SP1X7BA12F) or InfiniBand Adapter M3 (7104073) mounted in Slot#0, Slot#2 cannot be used. If this card is mounted in Slot#3, S #10 cannot be used.

lot#5 and #6 cannot be used. If this card is mounted in Slot#7, Slot#9 and

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201478

Page 87

Table 4-5

PCI slot number Group A Group B Group C Group A:

Mounting order of PCI slots of SPARC M10-4S

Mounting order of PCI slots (*1) (*3)

For Oracle Solaris 11 or for Oracle Solaris 10 without PCI expansion unit connection cards ordered together (*2)

For Oracle Solaris 10 with PCI expansion unit connection cards ordered together

2CPU

Group A: 4CPU

Group B Group C

Slot#0 1st 8th - 1st 1st 8th -

Slot#1 4th 5th 1st - 4th 5th 1st

Slot#27th2nd---2nd-

Slot#3 2nd 7th - 2nd 2nd 7th -

Slot#46th3rd---3rd-

Slot#5 5th 4th - - 5th 4th -

Slot#68th1st---1st-

Slot#7 3rd 6th - 3rd 3rd 6th -

7100563, 1109A-Z, 4447A-Z-N, 7281A-2-N

[FCoE] SE

*3 In a 2-CPU configuration with the Dual Port InfiniBand 4x QDR card (SP1X7BA12F) or InfiniBand Adapter M3 (7104073) mounted in Slot#0, Slot#2 cannot be used. If this card is mounted in Sl

0X7EF12F, SE0X7EC12F, SP1X7FAR2F, SP1X7FAS2F SG-PCIEFCOE2-Q-SR,SG-PCIEFCOE2-Q-TA 7101673 (with FCoE transceiver or no transceiver) 7101683 (with FCoE transceiver or no transceiver)

ot#3, Slot#5 and #6 cannot be used.

Table 4-6

PCI slot number Mounting order of PCI slots

Mounting order of PCI slots of PCI expansion unit

Slot#1 1st

Slot#2 6th

Slot#3 7th

Slot#4 2nd

Slot#5 5th

Slot#6 8th

Slot#7 11th

Slot#8 3rd

Slot#9 4th

Slot#10 9th

Slot#11 10th

Chapter 4　Factory-default Mounting Order of PCI Cards 79

Page 88

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201480

Page 89

Appendix A

Cards that Support PCI Hot Plug and Dynamic Reconfiguration

This appendix describes cards that support PCI Hot Plug and Dynamic Reconfiguration.

The SPARC M10-4/M10-4S on-board PCI slot and PCI expansion unit support active replacement and active addition of PCI cards using PCI Hot Plug (PHP). The SPARC M10-1 on-board PCI slot does not support this function. The SPARC M10-4S supports the dynamic reconfiguration (DR) function for a

physical partition. The SPARC M10-4/M10-1 do not su that does not support the dynamic reconfiguration function is mounted in a physical partition, dynamic reconfiguration (DR) for the physical partition cannot be performed. In that case, perform replacement or maintenance in the inactive state.

Table A-1 lists the PHP/DR supporting cards that have Fu

lists the PHP/DR supporting cards that have Oracle product IDs.

pport this function. If a card

jitsu product IDs. Table A-2

Table A-1

Category Name Product ID Driver

Link PCI expansion

LAN Dual Gigabit

Cards that support PHP/DR (Fujitsu product ID)

name Software product name

unit connection card

Ethernet card (MMF)

Dual Gigabit Ethernet card (MMF)

Quad Gigabit Ethernet card (UTP)

SPME8L K1F

SP1X7G D2F

SP1X7G D1F

SP1X7G Q2F

SP1X7G Q1F

None Yes No Yes Yes 0.1 sec.

igb Yes Yes

igb Yes Yes To be supported

igb Yes Yes Yes Yes 0.8 sec.

PHP: PCI Hot Plug DR: Dynamic Reconfiguration Path

Active replace ment support

Active

addition

support

Active replace ment support

To be supported

Active

addition

support

Suspend/ resume

processing

time (*2)

(*3)

redundancy software

None

Oracle Solaris standard multi-path function (IPMP), or PRIMECLU STER GLS

4.3A20 or later

Page 90

Table A-1

Category Name Product ID Driver

FCoE Dual-channel

FC Single-channel

Cards that support PHP/DR (Fujitsu product ID) (continu ed)

name Software product name

Dual 10 Gigabit Ethernet card

Dual 10Gigabit Ethernet card (10GBase-T)

10Gbps FCoE card (for optical cable)

Dual-channel 10Gbps car Copper Twinax cable)

FCoE

d (for

Dual-channel 10Gbps FCoE card (for optical cable)

Dual-channel 10Gbps FCoE card (for Copper Twinax cable)

Dual 10Gbps FCoE card (for optical cable)

Dual 10Gbps

card (fo

FCoE Copper Twinax cable)

8Gbps Fibre Channel card

Dual-channel 8Gbps Fibre Channel card

Single-channel

8Gbps Fibre Channel card

SE1X7H E3G

SP1X7H F1F

SP1X7F AR2F

SP1X7F AS2F

SP1X7FB R2F

SP1X7FB S2F

SE0X7EF 12F

SE0X7E

C12F

SE0X7F21F

SE0X7F22F

SE0X7F31F

ixgbe Yes Yes Yes Yes 0.4 sec.

qlc, qlcnic

emlxs, oce

qlc, qlge Yes Yes To be supported

qlc Yes Yes Yes Yes 10 sec. Oracle

qlc Yes Yes Yes Yes 20 sec.

emlxs Yes Yes Yes Yes 18.5 sec.

PHP: PCI Hot Plug DR: Dynamic Reconfiguration Path

Active replace ment support

Active

addition

support

Active replace ment support

Active

addition

support

Suspend/ resume

processing

time (*2)

redundancy software

No No To be supported Network

redundancy: Oracle Solaris

No No To be supported

standard multi-path function (IPMP) FC redundancy:

No No To be supported

Oracle Solaris standard multi-path function (mpxio) or ETERNUS multi-path driver 3.1.0

later

Solaris standard multi-path function (mpxio) or ETERNUS multi-path driver 3.1.0

later

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201482

Page 91

Table A-1

Category Name Product ID Driver

Cards that support PHP/DR (Fujitsu product ID) (continued)

name Software product name

Dual-channel 8Gbps Fibre Channel card

Dual-channel 16Gbps Fibre Channel card (SR SFP+)

Dual-channel 16Gbps Fibre Channel card (LR SFP+)

Dual-channel 16Gbps Fibre Channel card (SR SFP+)

SE0X7F32F

SP1X7F AA2F

SP1X7F AB2F

SP1X7FB A2F

emlxs Yes Yes Yes Yes 37 sec.

qlc Yes Yes Yes Yes 20 sec.

emlxs Yes Yes Yes Yes 37 sec.

SAS SAS card SE0X7SA1FFUJITSU

ULTRA LVD SCSI

Host Bus

Adapter

Driver

2.1 Update1

later

FLASH Flash

Infini

Band

6Gbps SAS card

Accelerator F80 card

Flash Accelerator F40 card

Dual Port InfiniBand 4x QDR card

SE0X7SA2Fmpt_sas Yes

SP1X7Y21F

SP1X7Y11F

SP1X7B

mpt_sas Yes Yes Yes Yes 0.2 sec. None (*5)

mpt_sas Yes Yes Yes Yes 0.2 sec.

hermon No No No No - Oracle

A12F

SE1X7B

hermon No No No No -

A12F

PHP: PCI Hot Plug DR: Dynamic Reconfiguration Path

Active replace ment support

Active

addition

support

Active replace ment support

Active

addition

support

Suspend/ resume

processing

time (*2)

redundancy software

YesYesYesYes0.2 sec. For

ETERNUS connection, ETERNUS multi-path driver l

ater

(*1)

Yes (*1)

Yes (*4)

0.2 sec. Oracle Solaris standard multi-path function (mpxio)

Solaris standard multi-path function (IPMP)

3.0 or

Appendix A　Cards that Support PCI Hot Plug and Dynamic Reconfiguration 83

Page 92

Table A-1

Category Name Product ID Driver

Graphic Graphics card SP0X7G

*1 PHP disconnection processing may fail. If disconnection processing fails, perform inactive replacement. *2 The suspend/resume processing time means the time required for the suspend/resume processing per PCI card. Calculate the total suspend/resume processing time for the PCI cards to be used. *3 Add up the suspend/resume processing time for all the PCI ca *4 Disconnection processing may return the busy status and fail in a configuration in which an expansion file unit is connected. Perform the disconnection processing after suspending the fmd service.

*5: When data must be inherited after card replacement with PHP, configure the disk, etc. that is the card connection destination in a

Cards that support PHP/DR (Fujitsu product ID) (continu ed)

name Software product name

mko

R1F

Example: Suspension/resumption of the fmd service

(Suspension) # svcadm disable svc:/system/fmd:default (Resumption) # svcadm en

redundant configuration beforehand by mirroring the disk, etc. with ZFS, GDS, etc.

able svc:/system/fmd:default

(TSI)

PHP: PCI Hot Plug DR: Dynamic Reconfiguration Path

Active replace ment support

Active

addition

support

No No No No - None

rds mounted in the PCI expansion unit.

Active replace ment support

Active

addition

support

Suspend/ resume

processing

time (*2)

redundancy software

Table A-2

Category Name For

Link Link card kit

Cards that support PHP/DR (Oracle product ID)

mounting before shipment from factory (For

installation

7105513

(7105576)

LAN Sun Dual Port

GbE PCIe2.

7100482

(7100481)

0LowProfileAda pter,MMF

Sun Quad Port GbE PCIe 2.0 Low Profile Adapter, UTP

Sun Dual Port 10GBase-T Adapter

Sun Dual 10GbE SFP+ PCIe 2.0 Low Profile Adapter

7100479

(7100477)

7100563

(7100488)

1109A-Z (X1109A

-Z)

site)

Driver name Software product name

None Yes No Yes Yes 0.1 sec.

PHP: PCI Hot Plug DR: Dynamic Reconfiguration Path

Active replace ment support

Active

addition

support

Active replace ment support

Active

addition

support

Suspend/ resume

processing

time (*2)

redundancy software

None

(*2)

igb Yes Yes To be supported Oracle

Solaris standard multi-path function (IPMP)

igb Yes Yes Yes Yes 0.8 sec.

ixgbe Yes Yes Yes Yes 0.4 sec.

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201484

Page 93

Table A-2

Category Name For

Cards that support PHP/DR (Oracle product ID) (continued)

mounting before shipment from factory (For

installation

PCIe Quad port GigE (copper) x8 lane card

4447AZ-N (X4447A

-Z-N)

FCoE/FC Sun Storage 10

PCI-E Low-Profile Dual GigE MMF

GbE PCIe FCoE Converged Network Adapter: QLogic low profile, dual port and SR optics

Sun Storage 10 GbE PCIe FCoE Converged Network Adapter: QLogic low profile, dual port and Twin-AX

Sun Storage 16Gb Fibre Channel PCIe Universal Host Bus Adapter, Qlogic

with the 16

Gb FC

short

wave optics

with the 16

Gb FC

long

wave optics

with the 10

FCoE short reach optics or TwinAx cables

7281A-2-N

(X7281A

-2-N)

SGPCIEFC

OE2-Q-SR

(7105381, SGXPCIEF COE2-QSR)

SGPCIEFC

OE2-Q-TA

(7105382, SGXPCIEF COE2-QTA)

7101673

(7101674)

with 7101675

(7101676)

with 7101679

(7101680)

with 7101677

(7101678)

or TwinAx cables

site)

Driver name Software product name

nxgeYesYesYesYes0.8 sec.

e1000g Yes Yes Yes Yes 0.4 sec.

PHP: PCI Hot Plug DR: Dynamic Reconfiguration Path

Active replace ment support

Active

addition

support

Active replace ment support

Active

addition

support

Suspend/ resume

processing

time (*2)

redundancy software

qlc,qlge Yes Yes To be supported Oracle

Solaris standard multi-path function (IPMP), and Oracle Solaris

qlc,qlge Yes Yes To be supported

standard multi-path function (mpxio)

- -----

qlc Yes Yes Yes Yes 20 sec.

qlc,

Yes Yes To be supported

qlcnic

Appendix A　Cards that Support PCI Hot Plug and Dynamic Reconfiguration 85

Page 94

Table A-2

Category Name For

Cards that support PHP/DR (Oracle product ID) (continu ed)

mounting before shipment from factory (For

installation

Sun Storage 16Gb Fibre Channel PCIe Universal Host Bus Adapter, Emulex

with the 16

Gb FC

short

wave optics

with the 10

FCoE short reach optics or TwinAx cables

8 Gb FC PCIe, QLogic, Dual Port

7101683

(7101684)

with 7101685

(7101686)

with 7101687

(7101688)

SGPCIE2FC

-QF8-Z (SGXPCIE2F

C-QF8-N)

8 Gb FC PCIe, QLogic, Single Port

SGPCIE1FC

-QF8-Z (SGXPCIE1F

C-QF8-N)

8 Gb FC PCIe, Emulex, Dual Port

SGPCIE2FC

-EM8-Z (SGXPCIE2F C-EM8N)

8 Gb FC PCIe, Emulex, Single Port

SGPCIE1FC

-EM8-Z (SGXPCIE1F C-EM8N)

site)

Driver name Software product name

PHP: PCI Hot Plug DR: Dynamic Reconfiguration Path

Active replace ment support

Active

addition

support

Active replace ment support

Active

addition

support

Suspend/ resume

processing

time (*2)

- -----

emlxs Yes Yes Yes Yes 37 sec.

emlxs,

Yes Yes To be supported

oce

qlc Yes Yes Yes Yes 20 sec.

qlc Yes Yes Yes Yes 10 sec.

emlxs Yes Yes Yes Yes 37 sec.

emlxs Yes Yes Yes Yes 18.5 sec.

redundancy software

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201486

Page 95

Table A-2

Category Name For

SAS Sun Storage 6 Gb

Cards that support PHP/DR (Oracle product ID) (continued)

SAS PCIe HBA: 8 ports, external

mounting before shipment from factory (For

installation

site)

SGSAS6EXT-Z

Driver name Software product name

mpt_sas

PHP: PCI Hot Plug DR: Dynamic Reconfiguration Path

Active replace ment support

Active

addition

support

YesYesYesYes0.2 sec. Oracle

(7105387, SGXSAS6-

Active replace ment support

Active

addition

support

Suspend/ resume

processing

time (*2)

redundancy software

Solaris standard multi-path function (mpxio)

EXT-Z)

Sun StorageTek 8-port External SAS PCI-Express Host Bus Adapter

SGPCIE8SA S-E-Z-N (SGXPCIE8S

mpt_sas

YesYesYesYes0.2 sec.

AS-E-ZN)

FLASH

Flash Accelerator

F80 PCIe Card: 800GB, eMLC

Flash Accelerator

F40 card

IB Oracle Dual port

QDR InfiniBand Adapter M3

*1 Apply the total suspend/resume processing time for the PCI cards to be used. *2 Add the suspend/resume processing time for all the PCI cards mounted in the PCI expansion unit to the suspend/resume processing time for the link card. *3 When data must be managed after PHP, configure the disk, etc. that is the ca mirroring the disk, etc. with ZFS, etc. before using PHP.

Sun InfiniBand QDR Host Channel Adapter PCIe: low profile

7107091

(7107092)

7104480

(7104482)

7104073

(7104074)

4242A

(X4242A)

mpt_sas

YesYesYesYes0.2 sec. None (*3)

YesYesYesYes0.2 sec.

hermon No No No No - Oracle

Solaris standard

hermon Yes Yes No No -

rd connection destination in a redundant configuration by

multi-path function (IPMP), and Oracle Solaris standard multi-path function (mpxio)

Appendix A　Cards that Support PCI Hot Plug and Dynamic Reconfiguration 87

Page 96

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201488

Page 97

Appendix B

Cards that Support SR-IOV

This appendix describes the cards that support SR-IOV. The SPARC M10 system with the following XCP firmware version and Oracle VM Server for SPARC version supports the SR-IOV function.

- XCP firmware version: XCP2210 or later

- Oracle VM Server for SPARC version: 3.0 or later

For a list of the SR-IOV supporting card

Table B-2 lists the SR-IOV supporting cards that have Oracle product IDs.

Table B-1

Category Name Product ID Software product name

LAN Dual Gigabit Ethernet card

InfiniBand (*1) Dual Port InfiniBand 4x QDR

FC (*2) Dual-channel 16Gbps Fibre

*1 Oracle VM Server for SPARC 3.1 and later support use of this card. An Infiniband switch that supports SR-IOV is required. For details, see the Oracle VM Server for SPARC 3.1 Release Notes. *2 For details on the Fibre Channel SR-IOV, see the Oracle VM Server for SPARC 3.1 Release Notes.

Cards that support SR-IOV (Fujitsu product ID)

(MMF)

Quad Gigabit Ethernet card (UTP)

Dual 10Gigabit Ethernet card SE1X7HE3G Oracle Solaris (ixgbe)

Dual 10Gigabit Ethernet card (10GBase-T)

card

Dual Port InfiniBand 4x QDR card

Channel card (SR

SFP+)

s that have Fujitsu product IDs, see Table B-1.

(driver name)

SP1X7GD2F Oracle Solaris (igb)

SP1X7GQ2F Oracle Solaris (igb)

SP1X7HF1F Oracle Solaris (ixgbe)

SE1X7BA12F Oracle Solaris (hermon)

SP1X7BA12F Oracle Solaris (hermon)

SP1X

7FBA2F Oracle Solaris (emlxs)

Page 98

Table B-2

Category Name For mounting before

LAN Sun Dual Port GbE PCIe 2.0

InfiniBand (*1) Sun InfiniBand QDR Ho

FC (*2) Sun Storage 16Gb Fibre

Cards that support SR-IOV (Oracle product ID)

Low Profile Adapter, MMF

Sun Quad Port GbE PCIe 2.0 Low Profile Adapter, UTP

Sun Dual Port 10GBase-T Adapter

Sun Dual 10GbE SFP+ PCIe 2.0 Low Profile Adapter

st Channel Adapter PCIe: low profile

Oracle Dual Port QDR InfiniBand Adapter M3

Channel PCIe Universal Host Bus Adapter, Emulex with the 16Gb FC short wave optics with emlxs

shipment from factory (For installation on site)

7100482 (7100481)

7100479 (7100477)

7100563 (7100488)

1109A-Z (X1109A-Z)

4242A (X4242A)

7104073 (7104074)

7101683 (7101684)

＋

7101685

(7101686)

Software product name (driver name)

Oracle Solaris (igb)

Oracle Solaris (ixgbe)

Oracle Solaris (hermon)

Oracle Solaris (emlxs)

Table B-3 lists the numbers of PFs (Physical Functions)/VFs (Virtual Functions) on the

SR-IOV supporting cards that have Fujitsu product IDs, andTable B-4 lists the numbers of PFs/VFs on the SR-IOV supporting cards that have Oracle product IDs.

Table B-3

Category Name Product ID Number of

LAN Dual Gigabit Ethernet card

InfiniBand Dual Port InfiniBand 4x QDR

Numbers of PFs/VFs on the SR-IOV supporting cards (Fujitsu product ID)

SP1X7GD2F 2 7

(MMF)

Quad Gigabit Ethernet card (UTP)

SP1X7GQ2F 4 7

Dual 10Gigabit Ethernet card SE1X7HE3G 2 63

Dual 10Gigabit Ethernet card (10GBase-T)

SP1X7HF1F 2 63

SE1X7BA12F 1 63

card

Dual Port InfiniBand 4x QDR card

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

SP1X7BA12F 1 63

･

PFs/card (*1)

July 201490

Number of

VFs/port (*2)

Page 99

Table B-3

Category Name Product ID Number of

FC Dual-channel 16Gbps Fibre

*1 The number of PFs created for each card *2 The number of VFs created for a port (PF) of each card

Numbers of PFs/VFs on the SR-IOV supporting cards (Fujitsu product ID) (continued)

PFs/card (*1)

SP1X7FBA2F 2 8

Channel card (SR SFP+)

Number of VFs/port (*2)

Table B-4

Category Name For mounting before

LAN Sun Dual Port GbE PCIe 2.0

InfiniBand Sun InfiniBand QDR Host

FC Sun Storage 16Gb Fibre

*1 The number of PFs created for each card *2 The number of VFs created for a port (PF) of each card

Numbers of PFs/VFs on the SR-IOV supporting cards (Oracle product ID)

shipment from factory (For installation on site)

7100482

Low Profile Adapter, MMF

Sun Quad Port GbE PCIe 2.0 Low Profile Adapter, UTP

Sun Dual Port 10GBase-T Adapter

Sun Dual 10GbE SFP+ PCIe 2.0 Low Profile Adapter

(7100481)

7100479 (7100477)

7100563 (7100488)

1109A-Z (X1109A-Z)

4242A Channel Adapter PCIe: low profile

Oracle Dua InfiniBand Adapter M3

l Port QDR

(X4242A)

7104073 (7104074)

7101683 Channel PCIe Universal Host Bus Adapter, Emulex with the 16Gb FC short wave optics with emlxs

(7101684)

＋

7101685

(7101686)

Number of PFs/card (*1)

Number of VFs/port (*2)

263

163

Appendix B　Cards that Support SR-IOV 91

Page 100

Fujitsu M10/SPARC M10 Systems PCI Card Installation Guide

･

July 201492

Fujitsu M10/SPARC M10, M10, SPARC M10, SPARC M10-1 Installation Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Contents

Preface

Audience

Related Documentation

Text Conventions

Command syntax in the text

Safety Precautions

Syntax of the Command-Line Interface (CLI)

Document Feedback

1.1 Prerequisites

1.1.1 Domain OS

1.1.2 System firmware XCP version

1.2 Maximum Number of Each Type of Mounted PCI Card and Available PCI Slots

1.2.1 If XCP2050 or later is used and Oracle Solaris 11 is installed on all the domains

1.2.3 XCP2044 or earlier

1.3 Hardware Configuration Diagram

2.1 Prerequisites

2.1.1 Domain OS

2.1.2 System firmware XCP version

2.1.3 Number of CPUs and number of root complexes

2.2 Maximum Number of Each Type of Mounted PCI Card and Available PCI Slots

2.2.1 If XCP2050 or later is used and Oracle Solaris 11 is installed on all the domains

2.2.3 XCP2044 or earlier

2.3 Relationship between the CPU Configuration and the Number of Root Complexes

3.1 Prerequisites

3.1.1 Domain OS

3.1.2 System firmware XCP version

3.1.3 Number of CPUs and number of root complexes

3.2 Maximum Number of Each Type of Mounted PCI Card and Available PCI Slots

3.2.1 If XCP2050 or later is used and Oracle Solaris 11 is installed on all the domains

3.2.3 XCP2044 or earlier

3.3 Relationship between the CPU Configuration and the Number of Root Complexes