Fujitsu P-TE1000E, P-TE1010E, P42VHA20E User Manual

USER’S MANUAL
42”/50” WIDE PLASMA DISPLAY
FOR FUJITSU 42” WIDE (MODEL: P42VHA10E/P42HHA10E/P42VHA20E) WITH OPTIONAL VIDEOBOARD (P-TE1000E/P-TE1010E).
FOR FUJITSU 50” WIDE (MODEL: P50XHA10E) WITH OPTIONAL VIDEOBOARD (P-TE1000E/P-TE1010E).
Contents
English
Page Page
Before Use
• Safety Precautions ··································· E-2–E-3
• Accessories ······················································ E-5
• Handy Tips ······················································· E-5
Usage
• Part Names and Functions ···················· E-7–E-10
• Using the Remote Control ··················· E-11–E-12
• Connecting the Display to External Equipment ············································ E-13–E-18
• Basic Operations ············································E-19
• Selecting Input Mode·····································E-20
• Other Basic Operations································· E-21
Watching Pictures on the Wide Screen ···
* is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas.
E-22–E-23
Adjustments
• Adjustment Menu ········································· E-24
• Adjusting Pictures (PICTURE Menu) ··· E-25–E-27
• Adjusting Screen Position and Size (POSITION/SIZE Menu) ························ E-28–E-29
• Adjusting AUDIO (AUDIO Menu) ········ E-30–E-31
Other Adjustments (FEATURES Menu) ···
• Initialization of User Adjustment Value (FACTORY DEFAULT) ·····································E-41
Others
• Options ·················································· E-42–E-43
• Factory Settings ············································ E-44
• Specification ········································· E-45–E-46
• Cleaning and Maintenance····························E-47
Please Note: Video functionality is only available if the plasma screen has the optional
videoboard P-TE1000E or P-TE1010E fitted.
Before using the display, read this manual carefully so that you know how to use the display correctly. Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the
safety precautions. Keep this manual where the user can see it easily. * Installation and removal require special expertise. Consult your product dealer for details.
E-32–E-40
Downloaded From TV-Manual.com Manuals
SAFETY PRECAUTIONS
IMPORTANT INFORMATION
IMPORTANT
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING: This is a Class B product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
FCC NOTICE
• P42VHA10E/P42HHA10E/P50XHA10E/P42VHA20E with optional Videoboard (P-TE1000E/P-TE1010E): A Class B digital device
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT SAFETY INSTRUCTIONS
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to defeat the safeguards incorporated into this product, observe the following basic rules for its installation, use and service. Please read these “Important Safeguards” carefully before use.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifier’s) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit
from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
Downloaded From TV-Manual.com Manuals
E-2
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, dose not operate normally, or has been dropped.
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Do not use attachments not recommended by the product manufacturer as they may cause hazards.
Do not use immediately after moving from a low temperature to high temperature, as this causes condensation, which may result in fire,
electric shock, or other hazards.
The apparatus shall not be exposed to dripping or splashing.
No objects filled with liquids, such as vases, shall be placed on the apparatus.
Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or adult, and serious
damage to the product. The product should be mounted according to the manufacturer’s instructions, and should use a mount recommended by the manufacturer.
– When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and uneven surfaces which may cause the
product and cart to overturn, damaging equipment or causing possible injury to the operator.
– Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the product and protect it from
overheating. These openings must not be blocked or covered. (The openings should never be blocked by placing the product on bed, sofa, rug, or other similar surface. It should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided and the manufacturer’s instructions have been adhered to.)
For proper ventilation, separate the product from other equipment, which may prevent ventilation, and keep distance more than 10 cm.
– This product should be operated only from the type of power source indicated on the label. If you are not sure of the type of power
supply of your home, consult your product dealer or local power company.
– This product is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you are unable to insert the plug
into the outlet, contact your electrician to install the proper outlet. Do not defeat the safety purpose of the grounded plug.
– Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay
particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product.
– For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the cable system. This will prevent damage to the product due to lightning and power line surges.
Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electric shock.
Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that
could result in a fire or electric shock. Never spill liquid of any kind on the product.
– Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltages and other hazards.
Refer all service to qualified service personnel.
Unplug this product from the wall outlet and refer service to qualified service personnel if the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the Operation Manual, as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.
– When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or with
same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
– Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the
product is in proper operating condition.
– The product should be placed more than one foot away from heat sources such as radiators, heat registers, stoves, and other products
(including amplifiers) that produce heat.
– When connecting other products such as VCRs, and personal computers, you should turn off the power of this product for protection
against electric shock.
– Do not place combustibles behind the cooling fan. For example, cloth, paper, matches, aerosol cans or gas lighters that present special
hazards when overheated.
– Use only the accessory cord designed for this product to prevent shock.
The power supply voltage rating of this product is AC110–240 V (42”) and AC220–240 V (50”), and the power cord attached conforms to the following power supply voltage. Use only the power cord designated by our dealer to ensure Safety and EMC.
When it is used with other power supply voltage, the power cable must be changed.
Use the standard power plug and cord set of the specified country.
Consult your product dealer.
Power cord
English
Power supply voltage:
Downloaded From TV-Manual.com Manuals
AC 100–125 V
(Not included)
AC 200–240 V
(Included)
AC 240 V (SAA TYPE)
(Not included)
E-3
FEATURES
Variety of input signals
In addition to mD-sub terminal, the display also supports input of digital RGB signal input enabling DVI standard (HDCP*) high definition picture quality.
Depending on the model, the display supports video input for different colour television systems as follows: NTSC, PAL, SECAM, PAL60, N-PAL, M-PAL, 4.43NTSC.
Desired screen size
This display offers a total of five different screen sizes in video input mode: Normal, Wide1, Wide2, Zoom1, and Zoom2.
A Normal mode is also available for displaying of normal-size (4:3 aspect ratio) pictures.
The display has a Compose mode to switch screen size automatically depending on the contents of software.
Three different screen sizes in RGB input mode (Normal, Wide, and Zoom) are also available.
Picture quality
Pro-setting allows adjustment for even higher picture quality.
Noise reduction function reduces noise to ensure clear pictures.
A display suitable for such film materials as movie pictures can be made by 24 frame mode function.
Convenient power saving setting
When no video signal is input to the display or the remote control is not operated for a long time, this function automatically reduces the power consumption of the unit.
Others
The white screen and screen orbiter functions are available to minimize phosphor burn-in.
3 audio input terminals and 20 W + 20 W (42)/12 W + 12 W (50”) external speaker output terminal are available.
* The HDCP (High-bandwidth Digital Content Protection) function ensures that high-vision digital contents (movies, etc.) provided with
copy-guard protection can be displayed on the plasma display.
Downloaded From TV-Manual.com Manuals
E-4
ACCESSORIES
CHECKING ACCESSORIES
One remote
control
Two AA batteries One users
manual
Manual
One power cable Two big ferrite
cores
Two small ferrite
cores
HANDY TIPS
Viewing the screen constantly for extended periods can strain your eyes. Be sure to stay at a proper distance (at least 1.5 m or 5 feet (42)/1.9 m or 6.3 feet (50)) from the screen and to look occasionally away while working.
Have the display inspected and cleaned by your dealer at regular intervals.
Pictures may become burnt into the screen phosphors if the screen is left on for extended periods. To ensure that the display has a
prolonged service life, be sure to use a screen orbiter, white screen. This will ensure the same picture or pattern is not constantly displayed for long periods. (See P. E-39–E-40.)
The plasma display panel, which is built for maximum precision, provides more than 99.99% effective pixels. You may find, however, that some pixels constantly remain lit or dimmed.
The display has a fan to prevent its internal temperature from rising.
Be careful with the air delivered by the fan. It may be very hot.
Contact your dealer if you find that the display does not seem to function properly when used with other audio-visual equipment.
You may need to move your display if it produces degraded pictures or noise due to electromagnetic radiation, or if the infrared remote control does not function properly.
Pictures may not be displayed properly if you connect a non-standard PC to the RGB input terminal. In this case, contact your dealer for more information.
The protective circuit, built into the display, automatically turns off the power if the display has a problem. In this case, you will see that the power indicator lamp flashes red.
English
Warning
If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the power plug from the receptacle to prevent fire or electric shock. Then, check the display in accordance with the instructions given on P. E-47, or contact your dealer.
Information
Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products.
Downloaded From TV-Manual.com Manuals
E-5
INSTALLATION
To prevent the displays internal components from overheating, make sure that the display is installed in a well-ventilated location.
Be sure to use the optional stand, wall-mounting unit or the other unit when installing the display. Also, be also sure that your dealer performs the installation.
See the appropriate instruction manual for more information on the installation hardware you select.
To prevent an accident and ensure safety in the event of an earthquake, fix the display securely into position as described below.
To ensure proper heat radiation, provide at least as much space around the display as shown below.
* Make sure that the display is installed in a location where the temperature can be maintained between 0°C and 40°C.
* Never attempt to tilt the display sideways or backward.
* To prevent the power and other cables from being accidentally pulled, make sure that they run along the wall or through corners.
* The display can be installed with either of its sides facing down.
Left
Front
Upper
10
10
5
Lower
(cm) (cm)
10
Right
Side
Wall
4
Note
The display is a highly precise piece of equipment and therefore must be packed properly before transportation. Be sure to use only those packing materials originally supplied with the display when repacking it.
Reference
See P. E-42 for more information on options.
Downloaded From TV-Manual.com Manuals
E-6
PART NAMES AND FUNCTIONS
DISPLAY SECTION – FRONT
①
②
(Right section)
⑨
1 Power indicator lamp
This lamp shows the state of the power supply.
Lit (red): Stand-by
Lit (green): Power ON
Lit (orange): Power saving (DPMS: Power saving
function) mode ON (See P. E-38.)
Flashing (red): Malfunction (Flashes differently depending
on the type of malfunction. See P. E-47 for more information.)
2 Remote control signal receiver
Receives signals from the remote control.
3 Input mode selector button
4 Input mode selector button
Switches between picture input modes.
5 VOL + button
6 VOL – button
Adjusts the sound volume.
7 Wide screen selector button [WIDE]
Switches the screen over to a desired wide screen.
8 ON/OFF button
Turns the power “ON” and “OFF (standby state)”.
[MODE]
[MODE]
English
Control Panel (Right side of display)
Warning
If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock.
Downloaded From TV-Manual.com Manuals
E-7
PART NAMES AND FUNCTIONS (Continued)
DISPLAY SECTION – LOWER PART
Bottom (P42VHA10 type)
Bottom (P42HHA10 type)
Bottom (50”)
Bottom (P42VHA20 type)
Videoboard
P-TE1000E type P-TE1010E type
1 /I power switch
When pressed while in the OFF state, the power indicator lamp lights and the display is placed in the ON state, and the power can be turnedON or OFF by the remote control or on the control panel of the display. When pressed while in the “ON ” state, the power indicator lamp goes out and the display is placed in the OFF state where power is still partly supplied.
2 RS-232C terminal (RS-232C)
This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC. When connecting a cable, attach a ferrite core to the cable. (See P. E-13.)
3 RGB1 input terminal (RGB1 INPUT/DVI-D)
Connect this terminal to the PCs display (digital RGB) output terminal. *The connection cable No.88741-8000 made by molex Inc. is recommanded.
4 RGB2 input terminal (RGB2 INPUT/mD-sub)
Connect this terminal to the PCs display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal.
5 Power input terminal
Connect this terminal to the power cable supplied with the display. When connecting a cable, attach a ferrite core to the cable. (See P. E-13.)
6 External speaker output terminal (EXT SP)
Connect this terminal to the optionally available speaker. When connecting a cable, attach a ferrite core to the cable. (See P. E-13.) *See the speaker instruction manual for more information.
7 Audio3 input terminal (AUDIO3 INPUT) 8 Audio2 input terminal (AUDIO2 INPUT) 9 Audio1 input terminal (AUDIO1 INPUT)
Connect this terminal to the sound output terminal of your VCR, etc. (See P.E-38 for the selection of audio input for video input.)
Downloaded From TV-Manual.com Manuals
E-8
0+A RGB3 input terminal (RGB3 INPUT/BNC)
Connect this terminal to the PC's display (analog RGB) output terminal or decoder (digital broadcast tuner,etc.) output terminal. *When RGB3 input terminal is connected, Comp.video mode is not available. (See P. E-36.)
A Component video input terminal (VIDEO4 INPUT)
Connect this terminal to the component video output (colour difference output) terminal of your HDTV unit or DVD player. *When Comp.video input terminal is connected, RGB3 mode is not available. (See P. E-36.)
B RGB3 synchronization switch (SYNC SW TTL/ANALOG (75 Ω))
This switch is used to terminate horizontal (H) terminal and vertical (V) terminal, out of RGB3 input terminals, with 75 Ω.
TTL : Does not terminate. ANALOG (75 ): Terminates.
C Video1 input terminal (VIDEO1 INPUT/P-TE1000E)
Connect this terminal to the SCART terminal of your VCR or DVD, etc. *See SETTING THE INPUT TERMINALS on E-35.
D S-Video input terminal (VIDEO2 INPUT/P-TE1010E)
Connect this terminal to the S-video output terminal of your VCR.
E Video input terminal (VIDEO1 INPUT/P-TE1010E)
Connect this terminal to the video output terminal of your VCR.
F Component video input terminal (VIDEO3 INPUT/P-TE1010E)
Connect this terminal to the component video output (colour difference output) terminal of your HDTV unit or DVD player.
Description of Input Terminals
DVI-D terminal (RGB1 INPUT/DVI-D)
English
RGB2 input terminal (RGB2 INPUT/mD-sub)
SCART terminal
48121620
26101418
159131721
37111519
RS-232C terminal (RS-232C)
Pin No. Input signal Pin No. Input signal
1 Red 9 — 2 Green 10 Ground 3 Blue 11 — 4— 12— 5 Ground 13 Horizontal synchronization 6 Ground 14 Vertical synchronization 7 Ground 15 — 8 Ground Frame Ground
Pin No.
1— 2 Right audio 3— 4 5 Blue ground 6 Left audio 7 Blue
Input Signal
Audio ground
Pin No.
Input Signal
8— 9
Green ground 10 — 11 Green 12 — 13 Red ground 14
Pin No.
15
Input Signal
Red/chrominance 16 — 17 — 18
Composite video ground 19 — 20
Composite video/Y 21 Ground
Pin No. Signal
1 DCD (Data Carrier Detect) 2 RD (Received Data) 3 TD (Transmit Data) 4 DTR (Data Terminal ready) 5 GND (Ground) 6 DSR (Data Set Ready) 7 RTS (Request To send) 8 CTS (Clear To Send) 9 RI (Ring Indication)
Downloaded From TV-Manual.com Manuals
E-9
PART NAMES AND FUNCTIONS (Continued)
REMOTE CONTROL
For details, see page .
1
button
Switches between power ON and standby state.
3 DISPLAY OFF button
For showing on-screen-information.
4 PICTURE MODE button
Switches the picture mode.
7 RGB input mode selector button
[RGB 1 – 3]
Selects RGB 1 – 3.
9 Video input mode selector button
[VIDEO 1 – 3]
Selects VIDEO 1 – 3.
A Menu button [MENU]
Use this button to display a desired menu for adjusting the picture.
B Enter button [ENTER]
Press this button to finalize the selection of a desired menu or option within a menu.
2 MUTE button
Temporarily mutes the sound.
5 PICTURE MEMORY button
Recalls the PICTURE MEMORY.
6 WIDE button
Switches the screen over to a desired wide screen.
8 RGB3/VIDEO4 input mode selector
button [RGB3/VIDEO4]
Selects RGB3 or VIDEO4.
0 Volume adjustment buttons
[VOL +/– ]
Adjust the volume. Press the + button to increase the volume. Press the – button to reduce the volume.
C Adjustment buttons [
Use these buttons to scroll through options in a menu.
/ / / ]
Downloaded From TV-Manual.com Manuals
E-10
USING THE REMOTE CONTROL
PUTTING BATTERIES IN THE REMOTE CONTROL
English
1 To remove the cover, slide it
outwards while pressing it down.
2 Place two AA batteries in the
remote control. Make sure that the batteries are properly oriented.
3 Close the cover until it snaps into
place.
PRECAUTIONS
To prevent malfunction, be sure not to apply any form of severe shock to the remote control.
To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or heating equipment.
Be sure not to clean the remote control using a cloth dampened in any volatile solvent, such as benzene or thinner.
CAUTION: Be sure to use replacement batteries of the same type as the original ones.
When disposing of used batteries, please comply with governmental regulations or environmental public institutions rules that apply in your country/area.
Note
The remote control will not function properly if the batteries are dead. Be sure to replace them as needed.
Do not use rechargeable batteries (Ni-Cd).
Downloaded From TV-Manual.com Manuals
E-11
USING THE REMOTE CONTROL (Continued)
EFFECTIVE RANGE FOR THE REMOTE CONTROL
Point the remote control at the display’s signal receiver when using it.
Make sure that there are no obstacles between the remote control and the displays signal receiver.
Display – side
Upper
20°
20°
Lower
Left
Display – front
30° 30°
5 m (Front)
Right
Information
The remote control may not function properly if you use a high-frequency fluorescent lamp. If you experience problems, move the lamp or use the remote control from a different position.
Downloaded From TV-Manual.com Manuals
E-12
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT
Be sure to turn OFF the power to the display and external equipment before making any connections.
No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC model. Contact your dealer for more information.
RECEPTACLE
Make sure that the power cable’s grounding wire is grounded.
The display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you will need to have it replaced. Contact your dealer for more information.
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT
Carefully check the terminals for position and type before making any connections.
Loose connectors can result in picture or colour problems. Make sure that all connectors are securely inserted into their terminals.
English
Ferrite cores
These ferrite cores are used to attenuate undesired signals.
Two big ferrite cores
When connecting a cable to the power input terminal, RS-232C terminal, attach one of these ferrite cores to the cable near the terminal.
Power Cable
Ferrite Core
Two small ferrite cores
When connecting a cable to the external speaker output terminal attach one of these ferrite cores to the cable near the terminal.
Ferrite Core Ferrite Core
RS-232C Cable
Ferrite Core
Downloaded From TV-Manual.com Manuals
E-13
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)
EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS
Speaker
VCR or other external components See P.
Display
Speaker (optional)
Remote control
E-15
VCR
DVD player
Satellite tuner
E-17
PC
E-18
Downloaded From TV-Manual.com Manuals
E-14
VCR
• Connect the video signal cable to the SCART terminal. (When the P-TE1000E is installed.)
• Connect the video signal to either the S-video input terminal or the video input terminal. (When the P-TE1010E is installed.)
To SCART output
To SCART input
English
To video output
To S-video output
To audio output
An example of the underside of the display
(with the P-TE1000E installed in the P42VHA10)
To video inputTo S-video inputTo audio input
An example of the underside of the display
(with the P-TE1010E installed in the P42VHA10)
Note
• Unplug the power cord from the AC outlet before you connect external components.
• Also refer to the instructions for the component to be connected.
• When inputting audio, connect to the terminals corresponding to the used video input or RGB input.
Downloaded From TV-Manual.com Manuals
E-15
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)
DVD PLAYER
Connect the video signal cable to either the component video terminal or the SCART terminal. (When the P-TE1000E is installed.)
Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal. (When the P-
TE1010E is installed.)
If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video terminal.
To SCART output
To component video output
To audio output
To component video output
To video output
To S-video output
To audio output
To component video input
To SCART input
To audio input
An example of the underside of the display
(with the P-TE1000E installed in the P42VHA10)
To video input
Downloaded From TV-Manual.com Manuals
E-16
To audio input
(with the P-TE1010E installed in the P42VHA10)
To S-video input
To component video input
An example of the underside of the display
SATELLITE TUNER
Connect the video signal cable to either the component video terminal or the SCART terminal. (When the P-TE1000E is installed.)
Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal. (When the P-
TE1010E is installed.)
If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video terminal.
To SCART output
To component video output
To audio output
To audio input
To component video input
To SCART input
English
An example of the underside of the display
(with the P-TE1000E installed in the P42VHA10)
To component video output
To video output
To S-video output
To audio output
To audio input
To video input
To S-video input
An example of the underside of the display
(with the P-TE1010E installed in the P42VHA10)
Note
Unplug the power cord from the AC outlet before you connect external components.
Also refer to the instructions for the component to be connected.
When inputting audio, connect to the terminals corresponding to the used video input or RGB input.
To component video input
Downloaded From TV-Manual.com Manuals
E-17
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)
PC
As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase.
The PC can be connected to either the front side or the rear side, whichever is most convenient.
To RGB output (mD-sub)
To audio output
To RGB output (DVI-D)
To audio input
To RGB2 input (mD-sub)
To RGB1 input (DVI-D)
An example of the underside of the display
(with the P-TE1000E installed in the P42VHA10)
Note
Unplug the power cord from the AC outlet before you connect external components.
Also refer to the instructions for the component to be connected.
When inputting audio, connect to the terminals corresponding to the used video input or RGB input.
Downloaded From TV-Manual.com Manuals
E-18
BASIC OPERATIONS
TURNING THE POWER ON AND OFF
English
* You can also use the buttons
on the display’s control panel to perform these steps.
1
2
3
Press /I to the left at the bottom of the display.
The power lamp lights up.
Press on the remote control.
The colour of the power lamp changes from “Red” to “Green”.
Press or or
.
Select the video mode to be input.
Press when the power is ON.
The colour of the power lamp changes from “Green” to “Red” and the power turns “OFF”.
ADJUSTING THE VOLUME
Press the Volume button
Press to increase the volume.
Press
Any value between 0 and 40 can be selected.
* Note that the volume level remains stored even when you
turn OFF the power.
Muting the sound
Press .
The sound is removed.
Press again to restore the sound to the original level.
The mute mode can also be released by pressing the volume buttons.
to reduce the volume.
When the volume adjustment button is pressed
Downloaded From TV-Manual.com Manuals
E-19
SELECTING INPUT MODE
VIDEO INPUT MODE
1
Press the buttons to select the input mode.
You can select from VIDEO1 mode to VIDEO4 mode.
The video modes corresponding to each input terminal are as follows.
VIDEO1: SCART (when P-TE1000E is installed), Video (when P-TE1010E is installed)
VIDEO2: S-Video (when P-TE1010E is installed)
VIDEO3: Comp. video (when P-TE1010E is installed)
VIDEO4: Comp. video
Video1 mode
* You can also use the buttons
on the displays control panel to perform these steps.
RGB INPUT MODE
1
* For selection of the input terminal, see
SETTING THE INPUT TERMINALS on P. E-36.
* You can select between RGB3 and VIDEO4 in
INPUT TERMINALS.
Press to select the input mode.
You can select between the modes from RGB1 to RGB3.
The input terminal of each RGB mode is as follows.
RGB1: DVI-D
RGB2: mD-sub
RGB3: BNC
RGB1 mode
Downloaded From TV-Manual.com Manuals
E-20
OTHER BASIC OPERATIONS
CONVENIENT FUNCTIONS
On-screen information (DISPLAY)
Press .
The mode is indicated on the screen for 5 seconds.
Picture Mode (PICTURE MODE)
Press .
This button can be used to switch the picture mode.
In the picture mode, you can switch between the set status and the fine mode.
* For the picture mode settings, see Setting Picture Mode (P. E-26)”.
Picture Memory (PICTURE MEMORY)
Press .
This button can be used to recall the settings of the picture memories 1 – 8. Each time this button is pressed, the setting changes as follows.
English
Downloaded From TV-Manual.com Manuals
E-21
WATCHING PICTURES ON THE WIDE SCREEN
SWITCHING BETWEEN SCREEN SIZES
* You can also use the buttons
on the displays control panel to perform these steps.
1
2
Press .
The currently selected mode will appear.
Press to select a desired picture mode.
Each time you press , a different picture mode appears. The sequences used are as follows:
When you are in a Video or S-video input mode
When you are in a Comp.video input mode
When you are in an RGB input mode
* Depending on the type of signal, some aspects
may not be selected.
Normal mode
Wide1 mode
Note
Displaying a picture in a Normal mode for extended periods of time may cause phosphor burn-in.
A variety of picture modes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame
height) different from that of the TV program or video media, the pictures will appear differently than if you had selected a mode having the same aspect ratio.
Showing a movie or similar premium event at a different aspect ratio from its original one at any event site, restaurant, or bar for profit-making purposes or for a public audience may constitute a copyright infringement.
For films, try to select a mode having the same aspect ratio as the original picture; this enables the director’s original intentions to be preserved.
Reference
See P. E-28–E-29 for how to adjust the picture size and position.
Downloaded From TV-Manual.com Manuals
E-22
SCREEN SIZE
Normal
Displays pictures of normal size (i.e., a 4:3 aspect ratio).
Compose
The screen size changes automatically in accordance with the contents of image software you use.
Wide1
Displays natural-looking pictures of standard size on the wide screen.
Wide2/Wide
Ideal for displaying vertically extended pictures such as squeezed pictures and recorded HDTV programs.
Zoom1/Zoom
Enlarges horizontally extended pictures equally in all directions to maintain the aspect ratio constant.
Zoom2
Reduces the height of horizontally extended pictures with captions, without eliminating the caption. Only the height of pictures is reduced, not the height of the caption.
(Captions may not be easy to read, however, depending on the picture.)
Picture of
standard size
Vertically
extended picture
Horizontally
extended picture
Horizontally extended
picture with caption
English
Wide1
Wide2
Zoom1
Zoom2
ASPECT RATIO
The following aspect ratios are available.
4:3 aspect ratio (VHF/UHF broadcasting, BS broadcasting)
3
1.85:1 aspect ratio
(Vista Vision size)
1
Information
You may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the Vista Vision or Cinema Vision size i.e., the sizes used frequently for picture software.
4
1.85
16:9 aspect ratio (HDTV broadcasting)
2.35:1 aspect ratio (Cinema Vision size)
16
9
2.35
1
Downloaded From TV-Manual.com Manuals
E-23
ADJUSTMENT MENU
ADJUSTMENT MENU
MENU
PICTURE
POSITION/SIZE
AUDIO
FEATURES
FACTORY DEFAULT
Contrast
Brightness
Colour
Tint
Sharpness
Picture Mode
PrecisionSetting
Noise Reduction *
Picture Memory
Position
Size
Treble
Bass
Balance
Loudness
Adjustment
Function
On Screen Menu
Input Terminal
Others
Luminance
Black Level
Colour Temp.
User Colour Temp.
*: for other than RGB
Dot Clock
Clock Phase
Clamp Position
Auto Calibration
24 Frame Mode
Can be set when Fine is selected as the Picture Mode.
for RGB2, RGB3
for RGB2, RGB3
for RGB2, RGB3, Comp. video
for RGB2, RGB3
for Video
OSD
Language
Name Select
with P-TE1000E
Video Input
BNC Input
D-SUB Input
DVI Input
DPMS
Audio Input
Screen Orbiter
Direct Setting
Code Setting
White Screen
Exhibition Mode
Information
with P-TE1010E
Video Input
S-video Input
BNC Input
D-SUB Input
DVI Input
for other than RGB1
for RGB
for RGB
for RGB2, RGB3
Downloaded From TV-Manual.com Manuals
E-24
ADJUSTING PICTURES (PICTURE MENU)
BASIC OPERATIONS [EX.: ADJUSTING TINT (Tint)]
You can make changes to all picture adjustment options in the PICTURE Menu.
The changes you make will be stored for a selected input mode. Therefore, you need to select a desired input mode before making any changes.
1
2
3
Press .
The main menu screen will appear.
Press or to select
“PICTURE”.
Each time you press or , one of the available menus appears in the following sequence:
PICTURE POSITION/SIZE AUDIO FEATURES FACTORY DEFAULT
The PICTURE Menu screen will appear.
Press or to select “Tint”.
“PICTURE” selected in the main menu screen (Video Input Mode)
English
4
5
6
Press
The “Tint” adjustment screen will appear.
Press or to change tint
values.
: More greenish colours
: More purplish colours
Press to store.
Press when you finish.
* Repeat steps 3, 4, 5 and 6 when you wish to
make changes to other options.
* When is pressed after you have selected
“Default”, the settings are returned to those that were valid when you purchased the set.
.
“Tint” selected in the PICTURE Menu screen (Video Input Mode)
“Tint” adjustment screen
* On-screen information disappears if you do not take any action for about 60 seconds.
Downloaded From TV-Manual.com Manuals
E-25
ADJUSTING PICTURES (PICTURE MENU) (Continued)
Contrast, brightness, colour darkness, tint, and picture sharpness are adjusted as shown in the following chart.
Select the item with
Adjustment Item Adjustment Range/Remarks
Contrast Lower contrast Higher contrast –30 to +30
Brightness Darker screen Brighter screen –60 to +60
Colour Lighter colours Darker colours –60 to +60
Tint More purplish colours More greenish colours –60 to +60 (RGB, Comp. video)
Sharpness Softer pictures Sharper pictures –4 to +4 (RGB)
Setting Picture Mode (Picture Mode)
Can set up the picture mode.
Each time you press or , one of the available choices appears in the following sequence:
Dinamic: Suitable for watching a normal motion picture. (Standard) Fine: Suitable for watching a dark picture such as movie.
Real 1: Makes a strong contrast picture.
Real 2: Makes a bright colour picture.
Static: Suitable for watching a still picture.
Press to store.
*Select Dinamic, Fine, Real 1, Real 2 or Static to suit your taste.
, and then adjust with . Finally, press to implement the adjustments.
30 to +30 (Video, S-video)
16 to +16 (other than RGB)
Precision Setting (for more advanced adjustment)
Luminance, Black Level, Colour Temperature, and User Colour Temperature are adjusted as shown
in the following chart.
Select the item with , and then adjust with . Finally, press to implement the
adjustments.
Adjustment Item Contents of Adjustments Operation
Luminance
Black Level
Colour Temperature
User Colour Temperature
Adjusts the luminance level. (when the Picture Mode is Fine)
Adjusts the picture when watching a dark image. (when the Picture Mode is Fine)
Set to low to obtain a warm atmosphere, and set to high to obtain a cold atmosphere.
Enables individual adjustment of Red, Green and Blue.
Use to adjust.
Use to adjust.
Use to adjust.
Use to select, and use to adjust.
Adjustment Range/Remarks
40 to 100%
15 to +15
3500 to +3500
0 to 255
Downloaded From TV-Manual.com Manuals
E-26
Setting Noise Reduction (Noise Reduction)
Can select the noise reduction setting corresponding to the noise level of the input signal.
Each time you press or ,one of the available choices appears in the following sequence:
Off: Noise reduction does not function. Min.: Weak setting
Std.: Standard setting
Max.: Strong setting
Press to store.
* Some type of signal can not be selected.
Storing the setting of PICTURE (Picture Memory)
Stores 8 patterns of adjustments set by PICTURE.
Read out and store to suit your taste.
In case of “Load”
When setting “Load”: Read out your desired Setting.
(1) Select “Picture Memory” and press .
The Picture Memory screen will appear.
(2) Press or to select Load.
(3) Select Data number to make Load.
(4) Press to read out.
English
Picture Memory selection screen
In case of Save
When setting Save: Set to suit your taste and store.
(1) Select “Picture Memory” and press .
The Picture Memory screen will appear.
(2) Press or to select Save.
(3) Select Data number to make Save.
(4) Press to save.
Load selection screen
* On-screen information disappears if you do not take any action for about 60 seconds.
Downloaded From TV-Manual.com Manuals
E-27
ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU)
BASIC OPERATION [EX.: ADJUSTING HORIZONTAL DIRECTION OF SCREEN POSITION]
You can make changes to all screen adjustment options in the POSITION/SIZE Menu.
The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any changes.
1
2
3 4
5
Press .
The main menu screen will appear.
Press or to select
POSITION/SIZE.
Each time you press or , one of the available menus appears in the following sequence:
PICTURE POSITION/SIZE AUDIO FEATURES FACTORY DEFAULT
The POSITION/SIZE Menu screen will appear.
Press or to select Position.
Press
The “Position” adjustment screen will appear.
Press , , or to
change position values.
: Moves screen up.
: Moves screen down.
: Moves screen to the right.
: Moves screen to the left.
.
POSITION/SIZE selected from the main menu screen
Position adjustment screen
6
Downloaded From TV-Manual.com Manuals
E-28
Press to store.
Press
* Repeat steps 3 to 6 when you wish to make
changes to other options.
* When is pressed after you have selected
Default, the settings are returned to those that were valid when you purchased the set.
when you finish.
Adjusting Screen Position (Position)
Horizontal position (Horizontal)
: Moves screen to the right.
English
: Moves screen to the left.
Vertical position (Vertical)
: Moves screen up.
: Moves screen down.
Press to store.
Adjusting Screen Size (Size)
Screen width (Width)
: Increases width.
: Reduces width.
Screen height (Height)
: Increases height.
: Reduces height.
Position adjustment screen
Size adjustment screen
Press to store.
*You cannot adjust screen size in RGB1 (DVI-D) mode.
Setting Range
Video, S-video mode
Position
Size
* Depending on the input signal, the adjustment range may differ.
Horizontal: -30 to +30 Vertical
Zoom: -15 to +15 Others: -7 to +7
-3 to +12 (P42HHA10)
-7 to +16 (P42VHA10/20)
-3 to +12 (P50XHA10)
Comp.video mode
-16 to +16
-2 to +16 (P42HHA10)
-4 to +20 (P42VHA10/20)
-4 to +16 (P50XHA10)
RGB mode
-150 to +150
-12 to +25 (P42HHA10)
-25 to +50 (P42VHA10/P50XHA10/ P42VHA20)
* On-screen information disappears if you do not take any action for about 60 seconds.
Downloaded From TV-Manual.com Manuals
E-29
ADJUSTING AUDIO (AUDIO MENU)
BASIC OPERATION [EX.: ADJUSTING VOLUME BALANCE (Balance)]
You can make changes to all sound adjustment options in the AUDIO Menu.
The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any changes.
1 2
3
4
5
Press .
The main menu screen will appear.
Press or to select AUDIO”.
Each time you press or , one of the available menus appears in the following sequence:
PICTURE POSITION/SIZE AUDIO FEATURES FACTORY DEFAULT
The AUDIO Menu screen will appear.
Press or to select Balance.
Press
The “Balance” adjustment screen will appear.
Press or to adjust the
balance.
.
AUDIO selected in the main menu screen
Balance selected in the AUDIO Menu
screen
6
: Higher volume from the right-hand speaker
: Higher volume from the left-hand speaker
Press to store.
Press
* Repeat steps 3 to 6 when you wish to make
changes to other options.
* Audio Input menu will not be displayed when
No Audio is selected. (See P. E-38.)
when you finish.
Downloaded From TV-Manual.com Manuals
E-30
Adjusting Treble (Treble)
Any value between -6 and +6 can be selected.
: Stronger treble
: Weaker treble
Adjusting Bass (Bass)
Any value between -6 and +6 can be selected.
: Stronger bass
: Weaker bass
Adjusting Volume Balance (Balance)
Any value between -10 and +10 can be selected.
: Higher volume from the right-hand speaker
: Higher volume from the left-hand speaker
Setting Loudness (Loudness)
Corrects the balance between bass and treble for easy listening even with weak volume.
Each time you press sequence:
or , one of the available choices appears in the following
English
AUDIO Menu screen
On
On: Corrects bass and treble.
Off : Loudness dose not function.
Off
* On-screen information disappears if you do not take any action for about 60 seconds.
Downloaded From TV-Manual.com Manuals
E-31
OTHER ADJUSTMENTS (FEATURES MENU)
BASIC OPERATION [EX.: SELECTING LANGUAGE (Language)]
You can make the following changes in the FEATURES Menu.
1
2
3
4
5
Press .
The main menu screen will appear.
Press or to select
“FEATURES”.
Each time you press or , one of the available menus appears in the following sequence:
PICTURE POSITION/SIZE AUDIO FEATURES FACTORY DEFAULT
The FEATURES Menu screen will appear.
Press or to select “On Screen Menu”.
• Select a desired option for adjustment/setup from Adjustment, Function, On Screen Menu, Input Terminal and Others.
Press .
• On Screen Menu appears.
Press or to select “Language”.
“FEATURES” selected in the main menu screen
On Screen Menu screen
6
7
8
Press
The “Language” selection screen will appear.
Press or to select the language.
Press
The menu is displayed in the selected language.
Press when you finish.
* Repeat steps 3 to 8 when you wish to make changes
to other options.
.
.
“Language” selection screen
Downloaded From TV-Manual.com Manuals
E-32
FEATURES setup screen has the following 5 options.
Adjustment : Can make a fine adjustment of pictures such as Dot Clock, Clamp Position.
Function : Allows setting of 24-frame mode. (See P. E-34.)
On Screen Menu : Can make a display setting such as OSD, Language. (See P. E-34.)
Input Terminal : Can make an input terminal setting such as Video Input. (See P. E-35 – E-37.)
Others : Can make other settings. (See P. E-38 – E-40.)
ADJUSTMENT
Dot Clock, Clock Phase, Clamp Position, and Auto Calibration are adjusted as shown in the following chart.
Select the item with
, and then adjust with . Finally, press to implement the adjustments.
English
Adjustment Item Contents of Adjustments Operation
Dot Clock (RGB2, RGB3)
Clock Phase (RGB2, RGB3)
Clamp Position (RGB2, RGB3, Comp. video)
Auto Calibration (RGB2, RGB3)
You may find that pictures blur, depending on the clock frequency of your PC’s processor. If you experience blurring, you can obtain a clearer picture by adjusting the Dot Clock”.
Pictures may blur as the clock phase of your PC may be different. In this case, adjust the clock phase manually. Normally, the automatic setting ensures the optimal value.
Adjusts the clamp position in accordance with the input signal received from connected equipment. Normally, the automatic setting ensures the optimal value.
Adjusts the dynamic range of images to the optimum. Performed while a white screen signal is received.
Use
to select the optimal value at which blurring of pictures is eliminated.
Use to select the optimal value at which blurring of pictures is eliminated.
Use to select the optimal value.
Display the Auto Calibration screen and select Execute, and then use
to select the item.
Adjustment Range/Remarks
–60 to +60
Auto/Manual Manual: 1 to 32
–8 to +8
Execute/Cancel
* On-screen information disappears if you do not take any action for about 60 seconds.
Downloaded From TV-Manual.com Manuals
E-33
OTHER ADJUSTMENTS (FEATURES MENU) (Continued)
FUNCTION
• Displaying the optimum movie pictures (24 Frame Mode) for Video
Can make the optimum display of 24 frames/second signals such as movie pictures. Each time you press or , one of the available choices appears in the following sequence:
On Off
On : Displays the optimum movie pictures. Off : Displays normal pictures.
Press to store.
* Some type of signal can not be selected.
ON SCREEN MENU
• Setting Display Information (OSD)
You can use this option to select whether to display information other than menus. (Error messages are displayed regardless of what choice you make for this option.)
Each time you press or , one of the available choices appears in the following sequence:
On (OSD: bright): On-screen information shown in light colour.
On (OSD: dark): On-screen information shown in dark colour.
Off: Except for menus and error messages, on-screen information is not displayed.
Press to store.
• Selecting Language (Language)
You can use this option to select the language displayed on the screen.
(1) Select “Language” and press .
The “Language” selection screen will appear.
(2) Press or to select your desired language.
日本語 (Japanese) English Deutsch (German) Español (Spanish) Français (French) Italiano (Italian) Português (Portuguese) Russkij (Russian)
(3) Press .
The menu is displayed in the selected language.
• Selection of indications
You can change the settings for indications for video inputs and RGB inputs.
Video input
You can change the settings for indications for the VIDEO inputs.
Select the desired indication in accordance with the connected equipment.
Each time is pressed, the setting is switched. (In the case of VIDEO1)
OSD selection screen
“Language” selection screen
Press to store.
RGB input
You can change the settings for indications for the RGB inputs.
Select the desired indication in accordance with the connected equipment.
Each time is pressed, the setting is switched. (In the case of RGB 1)
Press to store.
Downloaded From TV-Manual.com Manuals
E-34
SETTING THE INPUT TERMINALS
Video Input (when the P-TE1000E is installed)
Function
Select the video input format.
Each time is pressed, the setting is switched.
Select the desired input.
Press to store.
Video Format
You can use this option to select the desired video mode of pictures it will receive to the Video Input terminal.
Each time you press or , one of the available modes appears in the following sequence:
Auto1: Automatically selects NTSC, PAL and SECAM.
Auto2: Automatically selects NTSC and M-PAL.
Other than Auto: You need to select a system appropriate to the input signal.
Press to store.
Mask
Each time you press or , one of the available choices appears in the following sequence:
Off: Does not mask.
Number: Masks the fringe (top, bottom, right and left) of the screen by the number of pixels specified.
Press to store.
English
* On-screen information disappears if you do not take any action for about 60 seconds.
Downloaded From TV-Manual.com Manuals
E-35
1234567890123456789012345678901
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1234567890123456789012345678901
OTHER ADJUSTMENTS (FEATURES MENU) (Continued)
Video Input (when the P-TE1010E is installed)
You can use this option to select the desired video mode of pictures it will receive to the Video Input terminal.
Each time you press or , one of the available modes appears in the following sequence:
Auto1: Automatically selects NTSC, PAL and SECAM.
Auto2: Automatically selects NTSC and M-PAL.
Other than Auto: You need to select a system appropriate to the input signal.
Press to store.
S-video Input (when the P-TE1010E is installed)
You can use this option to select the desired video mode of pictures it will receive to the Video Input terminal.
Each time you press or , one of the available modes appears in the following sequence:
Auto1: Automatically selects NTSC, PAL and SECAM.
Auto2: Automatically selects NTSC and M-PAL.
Other than Auto: You need to select a system appropriate to the input signal.
Press to store.
BNC Input
You can use this option to select the signal system it will receive to BNC Input terminal.
(1) Select BNC Input and press .
BNC Input screen appears.
(2) Select the signal system to receive.
Each time you press or , one of the available choices appears in the following sequence:
Comp.video: For using colour difference input.
RGB-Video: For using 0.3V input of sync. signal level with RGB signal input.
RGB-PC: For using PC wih RGB signal input.
Decoder: For using decoder with RGB signal input.
(3) Press or to select Mask.
(4) Select Comp.video, RGB-Video or Decoder by FUNCTION to set up Mask.
Each time you press or , one of the available choices appears in the following sequence:
Off: Does not mask.
Number:
Masks the fringe (top, bottom, right and left) of the screen by the number of pixels specified.
(5) Press to store.
BNC-Input selection screen
23456789012345678901234567890
23456789012345678901234567890
23456789012345678901234567890
23456789012345678901234567890
23456789012345678901234567890
23456789012345678901234567890
23456789012345678901234567890
23456789012345678901234567890
23456789012345678901234567890
23456789012345678901234567890
23456789012345678901234567890
23456789012345678901234567890
23456789012345678901234567890
23456789012345678901234567890
23456789012345678901234567890
23456789012345678901234567890
This fringe part is masked.
Downloaded From TV-Manual.com Manuals
E-36
D-SUB Input
1234567890123456789012345678901
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1234567890123456789012345678901
You can use this option to select the signal system it will receive to D-SUB Input terminal.
(1) Select D-SUB Input and press .
D-SUB Input screen appears.
(2) Select the signal system to receive.
Each time you press or , one of the available choices appears in the following sequence:
RGB-PC Decoder
RGB-PC: For using RGB for PC.
Decoder: For using digital broadcast tuner.
(3) Press or to select Mask.
(4) Select Decoder by FUNCTION to set up Mask.
Each time you press or , one of the available choices appears in the following sequence:
Off: Does not mask.
Number: Masks the fringe (top, bottom, right and left) of the screen by the number of pixels
specified.
(5) Press to store.
DVI Input
You can select the signal method input to the DVI input terminal.
Each time or is pressed, the setting is changed.
DVI1 DVI2
DVI1: Used when connecting to a PC.
DVI2: Used when connecting to a DVD player or digital tuner. Press to store.
* Set according to the signal method before connecting peripheral device.
D-SUB Input selection screen
23456789012345678901234567890
23456789012345678901234567890
23456789012345678901234567890
23456789012345678901234567890
23456789012345678901234567890
23456789012345678901234567890
23456789012345678901234567890
23456789012345678901234567890
23456789012345678901234567890
23456789012345678901234567890
23456789012345678901234567890
23456789012345678901234567890
23456789012345678901234567890
23456789012345678901234567890
23456789012345678901234567890
23456789012345678901234567890
This fringe part is masked.
English
Downloaded From TV-Manual.com Manuals
* On-screen information disappears if you do not take any action for about 60 seconds.
E-37
OTHER ADJUSTMENTS (FEATURES MENU) (Continued)
OTHER SETTINGS
DPMS for other than RGB1
You can use this option to select the amount of time before the DPMS function starts.
DPMS (which stands for “display power management signaling”) allows the display to maintain an automatic power saving function.
This function causes on-screen information to disappear until the next input operation, if the power
is ON and the display has not received any signals for the predetermined period of time. When
DPMS is active, the power indicator lamp turns orange.
(1) Select DPMS and press .
DPMS screen appears.
(2) Press or to select Time.
(3) Each time you press or , one of the available choices appears in the following sequence:
Off: Disables DPMS
Number: Approximate time before DPMS starts. (Unit: minutes)
* The power indicator lamp turns orange while the DPMS is ON.
* The power turns ON automatically when the display receives a signal.
(4) Can specify background colour.
Press or to select background colour.
Each time you press or , one of the available choices appears in the following sequence:
Black White
Black: Mutes images in Black background.
White: Mutes images in White background.
* Switches approx. 20 seconds after the display stops receiving signals.
(5) Press to store.
• Audio Input
You can use this option to select one of the three available terminals to receive sound from input equipment.
(1) Select “Audio Input” and press .
The “Audio Input” selection screen will appear.
(2) Press or to select input equipment.
(3) Select a desired input terminal.
Each time you press or , one of the available choices appears in the following sequence:
DPMS selection screen
“Audio Input” selection screen
No audio: No sound in the corresponding mode.
Audio 1-4: Selects Audio 1 through 4 for receiving sound in the corresponding mode.
* You can select Audio4 when P-TE1000E is installed.
* Repeat steps (2) and (3) for each piece of input equipment.
(4) Press to store.
*Audio Input menu will not be displayed when “No Audio” is selected.
Downloaded From TV-Manual.com Manuals
E-38
Minimizing phosphor burn-in (Screen Orbiter) for RGB
You can use this option to move the screen position to minimize phosphor-induced “burn-in”.
Follow the steps below.
(1) Select “Screen Orbiter” and press .
The Screen Orbiter setting screen will appear.
(2) Press or to select “Mode/Time”.
(3) Select a desired pattern.
Each time you press or , one of the available choices appears in the following sequence:
Off: Disables Screen Orbiter.
Time: Moves the pattern approximately every one hour.
Mode: Moves the pattern when the power is turned ON or when you switch between modes.
(4) Press or to select Moving Area”.
(5) Press or to select the range for moving the pattern.
Each time you press or , one of the available choices appears in the following sequence:
Min.: Pattern moves in small range. (About 5 pixels)
Std.: Pattern moves in moderate range. (About 10 pixels)
Max.: Pattern moves in wide range. (About 15 pixels)
(6) Press to store.
* When the Screen Orbiter function is operated in RGB1 mode, some letters at the top, bottom,
right or left of the screen may be missed.
English
Screen Orbiter setting screen
Setting RGB Input Signal Compulsorily (Direct Setting) for RGB
You can use this option to switch the setting for RGB input signal.
Each time you press or , one of the available choices appears in the
following sequence:
For RGB1 mode:
For RGB2 or 3 mode:
Auto: The optimum display is obtained automatically for input signals.
Others: The optimum resolution setting is fixed for each signal.
Press to store.
* In Auto mode, the resolution of VGA, WVGA, 480P, XGA, WXGA, SXGA and SXGA+ may not
be automatically distinguished. Switch to the fixed display when the image is not displayed
properly.
* On-screen information disappears if you do not take any action for about 60 seconds.
Downloaded From TV-Manual.com Manuals
E-39
OTHER ADJUSTMENTS (FEATURES MENU) (Continued)
Specifying RGB Input Signal (Code Setting) for RGB2, RGB3
You can use this option to specify and display the type of RGB input signal by code number. Each time you press or , one of the available choices appears in the following
sequence:
Auto Manual
Auto: Automatically displays the input signal to the optimum.
Manual: Selects RGB code number.
Press to store.
* In Auto mode, the optimum resolution may not be set up automatically depending on the type of
signal.
Select the type of signal when the image is not displayed properly. However, note that when the type of signal is selected directly, the signal of other resolution may
not be displayed properly.
Displaying white over entire screen (White Screen)
You can use this option to display white over the entire screen to minimize phosphor burn-in.
Each time you press or , one of the available choices appears in the following sequence:
On Off
Off: Does not display white.
On: Displays a white screen immediately.
Press to store.
Setting Exhibition Mode (Exhibition Mode)
You can use this option to display the enhanced contrast, which is most suitable for the use by unspecified persons.
Each time you press or , one of the available choices appears in the following sequence:
On Off
On: Sets up Exhibition mode.
Off: Sets up normal mode.
Press to store.
* In Exhibition mode, the display returns to the original setting in about 5 minutes even if the
adjustment is changed.
* The setup will be cancelled when removing the power plug from the receptacle.
Code Setting setting screen
Displaying System Status (Information)
Displays system operation status. Select Information and press .
The Information screen will appear.
Mode: Input mode appears at the upper right corner of the screen.
Freq. Scan Mode: Frequency scanning
Input Signal: Video mode
Input Sync.: Signal type
Freq.: Frequency and polarity (fH, fV)
Preset No.: RGB code number
* On-screen information disappears if you do not take any action for about 60 seconds.
Information screen (Video Mode)
Information screen (RGB Mode)
Downloaded From TV-Manual.com Manuals
E-40
INITIALIZATION OF USER ADJUSTMENT VALUE (FACTORY DEFAULT)
You can restore the values of the adjustment/setting made in the MENU to factory settings.
1
2
3
4
Press .
The main menu screen will appear.
Press or to select FACTORY
DEFAULT”.
Each time you press or , one of the available menus appears in the following sequence:
PICTURE POSITION/SIZE AUDIO FEATURES FACTORY DEFAULT
The FACTORY DEFAULT Menu screen will appear.
Press .
Displays the message of whether to proceed with the initialization.
Press or to select the Yes.
FACTORY DEFAULT selected in the main menu screen
Displays the message of whether to proceed the initialization
English
5
Press
The message of having completed the initialization will be displayed after initializing.
Press when you finish.
.
Displays the message of having completed the initialization
Downloaded From TV-Manual.com Manuals
E-41
OPTIONS
Wall-mounting unit 0° to 15° mounting angle P-WB4200
Hanging unit 0° to 15° mounting angle P-CT4200
Stand P-TT4200
Speaker P-SP4200 (for 42”)
P-SP5000 (for 50”) (1 set of 2 speakers)
Speaker Stand P-ST4200 (for 42”)
P-ST5000 (for 50”) (1 set of 2 speakers stands)
* When installing an option, make sure that all installation requirements for that option (as given in the relevant instruction manual) are met.
* The colours of options do not match the display colours perfectly.
Warning
To prevent injury, fire, and electric shock, arrange for options to be initially installed (or installed at a different location) by your dealer.
CAUTION: This display (P42VHA10E/P42HHA10E/P50XHA10E/P42VHA20E) is for use only with Fujitsu
General Limited’s option (P-WB4200, P-CT4200, P-TT4200). Using this display with other option can cause instability resulting in possible injury.
Downloaded From TV-Manual.com Manuals
E-42
INSTALLATION
1. Turn the power supply switch to OFF.
2. Remove the power plug from outlet.
3. Remove the plate attached to the bottom rear of the main unit from the Video board unit mounting bracket (3 mm screw w/spring X 3).
4. Insert the Video board unit into the main unit slot using the guides on the sides.
5. Completely insert the Video board until the plate touches the main unit box.
6. Mount the plate using the 3 screws with spring removed earlier.
7. Affix the enclosed connector label to the marking position on the rear cover.
Connecting the signal input cable
For details, see “Connecting to External Equipment” in the main unit instructions manual.
English
CAUTION: Follow the items given below, to prevent accidental injuries and possible electrical shock.
Turn off the power supply and disconnect the power plug from outlet before installing the Video board unit. Do not remove the cabinet when installing the Video board unit. Do not remove screws expect for the specified user service screw marked Do not use screws other than that specified in this manual for the installation of this Video board unit.
Downloaded From TV-Manual.com Manuals
”.
E-43
FACTORY SETTINGS
This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment value of the first input signal.
To do this, select a desired signal and follow the instructions in Adjusting Screen Position and Size” on P. E-28–E-29 to adjust the parameters. When you finish, the settings will be automatically stored. Thus, when the display receives that signal, pictures will be displayed in accordance with the settings you most recently selected.
Main corresponding signals (RGB mode)
SignalDisplay (dots x lines) Horizontal frequency (kHz) Vertical frequency (Hz)
640 x 480 31.47 59.94 VGA
640 x 480 37.50 75.00 VGA 75 Hz
640 x 480 43.27 85.01 VGA 85 Hz
720 x 400 31.47 70.09 400 lines
800 x 600 37.88 60.32 SVGA 60 Hz
800 x 600 46.88 75.00 SVGA 75 Hz
800 x 600 53.67 85.06 SVGA 85 Hz
1024 x 768 48.36 60.00 XGA 60 Hz
1024 x 768 60.02 75.03 XGA 75 Hz
1024 x 768 68.68 84.99 XGA 85 Hz
1280 x 1024 63.98 60.02 SXGA 60 Hz
1280 x 1024 79.98 75.03 SXGA 75 Hz
1600 x 1200 75.00 60.00 UXGA 60 Hz
1600 x 1200 106.25 85.00 UXGA 85 Hz
848 x 480 31.02 60.00
852 x 480 31.72 59.97
1360 x 768 47.71 60.01
720 x 485 15.73 59.94 60 fields
720 x 575 15.63 50.00 50 fields
* With some input signals, Out of range” may appear even when the horizontal and vertical frequencies are within their permissible ranges. Make
sure that the vertical frequency of the input signal is 85 Hz or less for SVGA/XGA/UXGA, 75 Hz or less for SXGA.
* In the DVI-D mode, the input signal can be restricted partly.
DVI-D
In the Comp.video and Video/S-video modes, the display has been factory-set as follows for different input signals:
Main corresponding signals (Comp.video mode)
Horizontal
frequency (kHz)
15.73 59.94 SDTV 480I
15.63 50.00 SDTV 576I
31.47 59.94 SDTV 480P
31.25 50.00 SDTV 576P
45.00 60.00 HDTV 720P
37.50 50.00 HDTV 720P
33.75 60.00 HDTV 1080I
28.13 50.00 HDTV 1080I
Depending on the input signal, the display may show pictures of reduced size due to size reduction and interpolation.
•“Out of range” appears if the display receives a signal whose characteristic does not fall within the display’s permissible range.
You can check input signals through “Information” on the FEATURES Menu screen. (See P. E-40.)
In order to facilitate the explanations, pictures and diagrams in this manual may differ slightly from the actual items.
All terms (i.e., company and product names) used in this document are trademarks or registered trademarks.
Downloaded From TV-Manual.com Manuals
E-44
Vertical
frequency (Hz)
Signal
Main corresponding signals (Video, S-video mode)
Horizontal
frequency (kHz)
15.73 59.94 NTSC
15.63 50.00 PAL
15.63 50.00 SECAM
15.63 59.52 PAL60
15.63 50.00 N-PAL
15.73 59.95 M-PAL
15.73 59.94 4.43NTSC
Vertical
frequency (Hz)
Signal
SPECIFICATION
Model P42VHA10E
Screen size 42" wide screen:
92.1 cm (W) x 51.8 cm (H) (105.7 cm diagonal)
36.3 inch (W) x 20.4 inch (H) (41.6 inch diagonal)
Aspect ratio 16:9 (wide)
Weight 28.5 kg / 62.8 lbs
Outer dimensions 103.7 (W) x 64.2 (H) x 8.5 (D) cm
40.8 (W) x 25.3 (H) x 3.3 (D) inch
Power supply 110–240 VAC 50/60 Hz
Current rating 4.3–1.8 A
Number of pixels 852 (H) x 480 (V)
Display modes Video, S-video input: Normal/Compose/Wide1/Wide2/Zoom1/Zoom2
Component video input: Normal/Wide1/Wide2/Zoom1/Zoom2
RGB: Normal/Wide/Zoom
Colours 16.77 million
External equipment terminals
Video input terminals Video1 Input (with P-TE1000) 1 SCART terminal
(Video, Audio Input) Video1 Input (with P-TE1010) 1 RCA terminal 1 Vp-p/75
Video2 Input (with P-TE1010) 1 S terminal Y: 1 Vp-p/75
Video3 Input (with P-TE1010) 3 RCA terminals Y: 1 Vp-p/75
Video4 Input 3 BNC terminals Y: 1 Vp-p/75
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
Applicable systems NTSC/PAL/SECAM/PAL60/N-PAL/M-PAL/4.43NTSC
PC input terminal RGB1 input 1 DVI-D terminal
RGB2 input mD-sub, 3 rows, 15-pin
Picture signal: 0.7 Vp-p/75 Synchronization signal:TTL level
RGB3 input 5 BNC terminals R:0.7 Vp-p/75
Sound terminals 2 sound input pin jacks (L/R) (3 lines)
500 mVrms/at least 22 k
Control terminal 1 RS-232C connector (D-sub 9-pin)
External speaker output terminal
Operating conditions Temperature: 0 to 40 °C / 32 to 104 °F
Accessories 1 remote control, 2AA batteries, 1 instruction manual, 1 power cable, 2 big ferrite cores,
Effective max. output: 20 W + 20 W (EIAJ), 4
Humidity: 20 to 80 %
2 small ferrite cores
42" wide screen:
92.2 cm (W) x 52.2 cm (H) (106.0 cm diagonal)
36.3 inch (W) x 20.6 inch (H) (41.7 inch diagonal)
1024 (H) x 1024 (V)
G:0.7 Vp-p/75 B:0.7 Vp-p/75 H:TTL /ANALOG (75 Ω) V:TTL /ANALOG (75 Ω)
P42HHA10E
C: 0.286 Vp-p/75
P
B/CB: 0.7 Vp-p/75
PR/CR: 0.7 Vp-p/75
PB/CB: 0.7 Vp-p/75 P
R/CR: 0.7 Vp-p/75
English
Specifications and external appearance may be change for the sake of improvement.
is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas.
Downloaded From TV-Manual.com Manuals
E-45
SPECIFICATION
Model P50XHA10E P42VHA20E
Screen size 50" wide screen: 42" wide screen:
110.6 cm (W) x 62.2 cm (H) (126.9 cm diagonal) 92.0 cm (W) x 51.8 cm (H) (106.0 cm diagonal)
43.5 inch (W) x 24.5 inch (H) (50.0 inch diagonal) 36.2 inch (W) x 20.4 inch (H) (41.7 inch diagonal)
Aspect ratio 16:9 (wide)
Weight 45.0 kg / 99.2 lbs 29.5 kg / 65.0 lbs
Outer dimensions 121.4 (W) x 72.8 (H) x 9.8 (D) cm 103.7 (W) x 64.2 (H) x 8.5 (D) cm
47.8 (W) x 28.7 (H) x 3.9 (D) inch 40.8 (W) x 25.3 (H) x 3.3 (D) inch
Power supply 220 – 240 VAC 50/60 Hz
Current rating 2.7 – 2.0 A 1.8 – 1.5 A
Number of pixels 1366 (H) x 768 (V) 852 (H) x 480 (V)
Display modes Video, S-video input: Normal/Compose/Wide1/Wide2/Zoom1/Zoom2
Component video input: Normal/Wide1/Wide2/Zoom1/Zoom2
RGB: Normal/Wide/Zoom
Colours 16.77 million
External equipment terminals
Video input terminals Video1 Input (with P-TE1000) 1 SCART terminal
(Video, Audio Input) Video1 Input (with P-TE1010) 1 RCA terminal 1 Vp-p/75
Video2 Input (with P-TE1010) 1 S terminal Y: 1 Vp-p/75
Video3 Input (with P-TE1010) 3 RCA terminals Y: 1 Vp-p/75
Video4 Input 3 BNC terminals Y: 1 Vp-p/75
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
Applicable systems NTSC/PAL/SECAM/PAL60/N-PAL/M-PAL/4.43NTSC
PC input terminal RGB1 input 1 DVI-D terminal
RGB2 input mD-sub, 3 rows, 15-pin
RGB3 input 5 BNC terminals R:0.7 Vp-p/75
Sound terminals 2 sound input pin jacks (L/R) (3 lines)
500 mVrms/at least 22 k
Control terminal 1 RS-232C connector (D-sub 9-pin)
External speaker output terminal Effective max. output: 12 W + 12 W (EIAJ), 6
Operating conditions Temperature: 0 to 40 °C / 32 to 104 °F
Humidity: 20 to 80 %
Accessories 1 remote control, 2AA batteries, 1 instruction manual, 1 power cable, 2 big ferrite cores,
2 small ferrite cores
(Continued)
Picture signal: 0.7 Vp-p/75 Synchronization signal:TTL level
C: 0.286 Vp-p/75
P
B/CB: 0.7 Vp-p/75
PR/CR: 0.7 Vp-p/75
PB/CB: 0.7 Vp-p/75 P
R/CR: 0.7 Vp-p/75
G:0.7 Vp-p/75 B:0.7 Vp-p/75 H:TTL /ANALOG (75 Ω) V:TTL /ANALOG (75 Ω)
Specifications and external appearance may be change for the sake of improvement.
is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas.
Downloaded From TV-Manual.com Manuals
E-46
CLEANING AND MAINTENANCE
Precautions
Be sure to remove the power plug from the receptacle before cleaning the display. Be sure not to clean the display using a cloth dampened with volatile solvents, such as benzene or thinner. Such solvents can harm the display’s cabinet, the filter at the screen front, and the remote control. They can also cause paint to come off these sections.
Cleaning the Screen
Clean the screen gently with a soft cloth. The screen surface is fragile. Never attempt to clean it with a hard material, press on it forcefully, or tap it.
Cleaning the Cabinet and Remote Control
Use a soft cloth for cleaning. If the cabinet or remote control is heavily stained, soak a soft cloth in a mixture of water and detergent and squeeze it dry before wiping off the stains. Use a soft, dry cloth for final cleaning.
Cleaning the ventilation grille
Remove dust from the ventilation grille in the rear of the main unit periodically with a vacuum cleaner as the accumulated dust can increase the internal temperature of the main unit causing machine failure or fire hazard.
HANDY TIPS
In the event of problems with the display, check the following explanations before contacting your dealer for servicing.
Problem
Power does not turn ON.
No pictures are displayed.
Remote control does not function properly.
The display makes a snapping sound.
The display makes a buzzing sound.
There are spots on the screen.
Degraded colours/tints
Improper screen position/size
No sound
If Out of range appears or the screen
turns black and white, the display is receiving a signal whose picture or signal cannot be reproduced by the display.
If Error message Condition 1 appears, the fan is defective.
If Error message Condition 2 appears, the displays internal components are extremely hot.
If Change refresh rate to 60Hz appears,
If the power indicator lamp flashes red.
Check whether the power plug is securely inserted into the receptacle.
Check cables for disconnection.
Check whether the power for all input equipment is ON.
Check for connection to wrong terminals or for wrong input mode.
Check whether the input mode display is coloured pink.Special setup may have been
made. Return to original setup or initialize the User adjustment value.
Check for incorrect battery orientation.
Check for dead batteries.
Check for distance from the display.
Check whether you are pointing the remote control transmitter properly at the displays
receiver.
Check for any obstacle between the remote control and the display.
This sound is produced when the cabinet expands or contracts due to variations in
temperature. This sound does not indicate that the display has a problem.
The display has fans to maintain the temperature of internal components at a constant level. This sound is produced by the fan as it rotates.
Check whether your AV equipment is affected by interference from automobiles, trains, high-voltage transmission lines, neon signs or other potential sources of interference.
Check whether all picture adjustments have been properly made. (See Adjusting Pictures on P. E-25–E-27.)
Check whether screen position and size have been properly adjusted. (See Adjusting Screen Position and Size” on P. E-28–E-29.)
Check cables for disconnection.
Input proper signals.
Make sure that the vertical frequency of the input signal is 85 Hz or less for SVGA/ XGA/UXGA, 75 Hz or less for SXGA.
Remove the power plug from the receptacle, and contact your dealer for repairs.
Remove the power plug from the receptacle. (You can turn the power back ON again
when the components have cooled sufficiently.) If the message appears again when you turn the power back on, remove the power plug from the receptacle, and contact your dealer for a repairs.
The picture may get blurred with vertical frequency of other than 48.3–51.8 or
58.4–61.4 (Hz). Change the setting of your PC,etc.
Remove the power plug from the receptacle, and inform your dealer about how the lamp flashed. As explained below, the power indicator lamp flashes differently depending on the type of problem:
Flashes repeatedly: Improper supply voltage level Flashes once: Malfunction by the fan Flashes twice: Excessive temperature Flashes three times or more: Other problems
Action
English
Downloaded From TV-Manual.com Manuals
E-47
Loading...