Fujitsu P-TE1000E, P-TE1010E, P42VHA20E User Manual

0 (0)

USER’S MANUAL

42”/50” WIDE PLASMA DISPLAY

English

FOR FUJITSU 42” WIDE (MODEL: P42VHA10E/P42HHA10E/P42VHA20E) WITH OPTIONAL VIDEOBOARD (P-TE1000E/P-TE1010E).

FOR FUJITSU 50” WIDE (MODEL: P50XHA10E)

WITH OPTIONAL VIDEOBOARD (P-TE1000E/P-TE1010E).

Contents

Page

Before Use

Safety Precautions ··································· E-2–E-3

Features ····························································E-4

Accessories ······················································ E-5

Handy Tips ······················································· E-5

Installation ······················································· E-6

Usage

Part Names and Functions ···················· E-7–E-10

Using the Remote Control ··················· E-11–E-12

Connecting the Display to External

Equipment ············································ E-13–E-18

Basic Operations ············································E-19

Selecting Input Mode·····································E-20

Other Basic Operations································· E-21

Watching Pictures on the Wide Screen ··· E-22–E-23

Page

Adjustments

Adjustment Menu ········································· E-24

Adjusting Pictures (PICTURE Menu) ··· E-25–E-27

Adjusting Screen Position and Size (POSITION/SIZE Menu) ························ E-28–E-29

Adjusting AUDIO (AUDIO Menu) ········ E-30–E-31

Other Adjustments (FEATURES Menu) ··· E-32–E-40

Initialization of User Adjustment Value (FACTORY DEFAULT) ·····································E-41

Others

Options ·················································· E-42–E-43

Factory Settings ············································ E-44

Specification ········································· E-45–E-46

Cleaning and Maintenance ····························E-47

* is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas.

Please Note: Video functionality is only available if the plasma screen has the optional videoboard P-TE1000E or P-TE1010E fitted.

Before using the display, read this manual carefully so that you know how to use the display correctly.

Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions.

Keep this manual where the user can see it easily.

* Installation and removal require special expertise. Consult your product dealer for details.

Downloaded From TV-Manual.com Manuals

SAFETY PRECAUTIONS

IMPORTANT INFORMATION

IMPORTANT

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION:

TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: This is a Class B product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

FCC NOTICE

• P42VHA10E/P42HHA10E/P50XHA10E/P42VHA20E with optional Videoboard (P-TE1000E/P-TE1010E): A Class B digital device

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

IMPORTANT SAFETY INSTRUCTIONS

Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. But

IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to defeat the safeguards incorporated into this product, observe the following basic rules for its installation, use and service. Please read these “Important Safeguards” carefully before use.

1)Read these instructions.

2)Keep these instructions.

3)Heed all warnings.

4)Follow all instructions.

5)Do not use this apparatus near water.

6)Clean only with dry cloth.

7)Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifier’s) that produce heat.

9)Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11)Only use attachments/accessories specified by the manufacturer.

12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13)Unplug this apparatus during lightning storms or when unused for long periods of time.

DownloadedE-2From TV-Manual.com Manuals

14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, dose not operate normally, or has been dropped.

– Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

– Do not use attachments not recommended by the product manufacturer as they may cause hazards.

– Do not use immediately after moving from a low temperature to high temperature, as this causes condensation, which may result in fire, electric shock, or other hazards.

– The apparatus shall not be exposed to dripping or splashing.

– No objects filled with liquids, such as vases, shall be placed on the apparatus.

– Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. The product should be mounted according to the manufacturer’s instructions, and should use a mount recommended by the manufacturer.

– When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and uneven surfaces which may cause the product and cart to overturn, damaging equipment or causing possible injury to the operator.

– Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the product and protect it from overheating. These openings must not be blocked or covered. (The openings should never be blocked by placing the product on bed, sofa, rug, or other similar surface. It should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided and the manufacturer’s instructions have been adhered to.)

For proper ventilation, separate the product from other equipment, which may prevent ventilation, and keep distance more than 10 cm.

– This product should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply of your home, consult your product dealer or local power company.

– This product is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you are unable to insert the plug into the outlet, contact your electrician to install the proper outlet. Do not defeat the safety purpose of the grounded plug.

– Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product.

– For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the product due to lightning and power line surges.

– Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electric shock.

– Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

– Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltages and other hazards. Refer all service to qualified service personnel.

– Unplug this product from the wall outlet and refer service to qualified service personnel if the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the Operation Manual, as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.

– When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or with same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

– Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

– The product should be placed more than one foot away from heat sources such as radiators, heat registers, stoves, and other products (including amplifiers) that produce heat.

– When connecting other products such as VCR’s, and personal computers, you should turn off the power of this product for protection against electric shock.

– Do not place combustibles behind the cooling fan. For example, cloth, paper, matches, aerosol cans or gas lighters that present special hazards when overheated.

– Use only the accessory cord designed for this product to prevent shock.

The power supply voltage rating of this product is AC110–240 V (42”) and AC220–240 V (50”), and the power cord attached conforms to the following power supply voltage. Use only the power cord designated by our dealer to ensure Safety and EMC.

When it is used with other power supply voltage, the power cable must be changed.

Use the standard power plug and cord set of the specified country.

Power cord

Consult your product dealer.

Power supply voltage:

AC 100–125 V

AC 200–240 V

AC 240 V (SAA TYPE)

 

(Not included)

(Included)

(Not included)

English

Downloaded From TV-Manual.com Manuals

E-3

FEATURES

Variety of input signals

In addition to mD-sub terminal, the display also supports input of digital RGB signal input enabling DVI standard (HDCP*) high definition picture quality.

Depending on the model, the display supports video input for different colour television systems as follows: NTSC, PAL, SECAM, PAL60, N-PAL, M-PAL, 4.43NTSC.

Desired screen size

This display offers a total of five different screen sizes in video input mode: Normal, Wide1, Wide2, Zoom1, and Zoom2. A Normal mode is also available for displaying of normal-size (4:3 aspect ratio) pictures.

The display has a Compose mode to switch screen size automatically depending on the contents of software.

Three different screen sizes in RGB input mode (Normal, Wide, and Zoom) are also available.

Picture quality

Pro-setting allows adjustment for even higher picture quality.

Noise reduction function reduces noise to ensure clear pictures.

A display suitable for such film materials as movie pictures can be made by 24 frame mode function.

Convenient power saving setting

When no video signal is input to the display or the remote control is not operated for a long time, this function automatically reduces the power consumption of the unit.

Others

The white screen and screen orbiter functions are available to minimize phosphor burn-in.

3 audio input terminals and 20 W + 20 W (42”)/12 W + 12 W (50”) external speaker output terminal are available.

*The HDCP (High-bandwidth Digital Content Protection) function ensures that high-vision digital contents (movies, etc.) provided with copy-guard protection can be displayed on the plasma display.

DownloadedE-4From TV-Manual.com Manuals

ACCESSORIES

CHECKING ACCESSORIES

One remote

Two AA batteries

One user’s

One power cable

Two big ferrite

Two small ferrite

control

 

manual

 

cores

cores

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Manual

English

HANDY TIPS

Viewing the screen constantly for extended periods can strain your eyes. Be sure to stay at a proper distance (at least 1.5 m or 5 feet (42”)/1.9 m or 6.3 feet (50”)) from the screen and to look occasionally away while working.

Have the display inspected and cleaned by your dealer at regular intervals.

Pictures may become “burnt” into the screen phosphors if the screen is left on for extended periods. To ensure that the display has a prolonged service life, be sure to use a screen orbiter, white screen. This will ensure the same picture or pattern is not constantly displayed for long periods. (See P. E-39–E-40.)

The plasma display panel, which is built for maximum precision, provides more than 99.99% effective pixels. You may find, however, that some pixels constantly remain lit or dimmed.

The display has a fan to prevent its internal temperature from rising.

Be careful with the air delivered by the fan. It may be very hot.

Contact your dealer if you find that the display does not seem to function properly when used with other audio-visual equipment.

You may need to move your display if it produces degraded pictures or noise due to electromagnetic radiation, or if the infrared remote control does not function properly.

Pictures may not be displayed properly if you connect a non-standard PC to the RGB input terminal. In this case, contact your dealer for more information.

The protective circuit, built into the display, automatically turns off the power if the display has a problem. In this case, you will see that the power indicator lamp flashes red.

Warning

If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the power plug from the receptacle to prevent fire or electric shock. Then, check the display in accordance with the instructions given on P. E-47, or contact your dealer.

Information

Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products.

Downloaded From TV-Manual.com Manuals

E-5

INSTALLATION

To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location. Be sure to use the optional stand, wall-mounting unit or the other unit when installing the display. Also, be also sure that your dealer performs the installation.

See the appropriate instruction manual for more information on the installation hardware you select.

To prevent an accident and ensure safety in the event of an earthquake, fix the display securely into position as described below. To ensure proper heat radiation, provide at least as much space around the display as shown below.

*Make sure that the display is installed in a location where the temperature can be maintained between 0°C and 40°C.

*Never attempt to tilt the display sideways or backward.

*To prevent the power and other cables from being accidentally pulled, make sure that they run along the wall or through corners.

*The display can be installed with either of its sides facing down.

Front

 

Side

Upper

(cm)

(cm)

 

 

10

 

 

10

10

 

Left

Right

Wall

 

 

5

 

 

Lower

 

4

 

 

Note

The display is a highly precise piece of equipment and therefore must be packed properly before transportation. Be sure to use only those packing materials originally supplied with the display when repacking it.

Reference

See P. E-42 for more information on options.

DownloadedE-6From TV-Manual.com Manuals

PART NAMES AND FUNCTIONS

DISPLAY SECTION – FRONT

1 Power indicator lamp

(Right section)

This lamp shows the state of the power supply.

Control Panel (Right side of display)

 

Lit (red):

Stand-by

 

 

Lit (green):

Power ON

 

 

Lit (orange):

Power saving (DPMS: Power saving

 

 

function) mode ON (See P. E-38.)

 

Flashing (red): Malfunction (Flashes differently depending

 

 

on the type of malfunction. See P. E-47 for

 

 

more information.)

2

Remote control signal receiver

 

 

Receives signals from the remote

.

3

Input mode selector

[MODE]

4

Input mode selector

[MODE]

 

Switches between picture input modes.

5

VOL + button

 

 

6

VOL – button

 

 

 

Adjusts the sound volume.

 

7Wide screen selector button [WIDE]

Switches the screen over to a desired wide screen.

8ON/OFF button

Turns the power “ON” and “OFF (standby state)”.

Warning

If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock.

Downloaded From TV-Manual.com Manuals

E-7

English

PART NAMES AND FUNCTIONS (Continued)

DISPLAY SECTION – LOWER PART

Bottom (P42VHA10 type)

Bottom (P42HHA10 type)

Bottom (50”)

Bottom (P42VHA20 type)

Videoboard

P-TE1000E type

P-TE1010E type

1/I power switch

When pressed while in the “OFF” state, the power indicator lamp lights and the display is placed in the “ON ” state, and the power can be turned “ON” or “OFF” by the remote control or on the control panel of the display. When pressed while in the “ON ” state, the power indicator lamp goes out and the display is placed in the “OFF” state where power is still partly supplied.

2RS-232C terminal (RS-232C)

This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC.

When connecting a cable, attach a ferrite core to the cable. (See P. E-13.)

3RGB1 input terminal (RGB1 INPUT/DVI-D)

Connect this terminal to the PC’s display (digital RGB) output terminal. *The connection cable No.88741-8000 made by molex Inc. is recommanded.

4RGB2 input terminal (RGB2 INPUT/mD-sub)

Connect this terminal to the PC’s display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal.

5Power input terminal

Connect this terminal to the power cable supplied with the display. When connecting a cable, attach a ferrite core to the cable. (See P. E-13.)

6External speaker output terminal (EXT SP)

Connect this terminal to the optionally available speaker.

When connecting a cable, attach a ferrite core to the cable. (See P. E-13.)

*See the speaker instruction manual for more information.

7 Audio3 input terminal (AUDIO3 INPUT)

8 Audio2 input terminal (AUDIO2 INPUT)

9Audio1 input terminal (AUDIO1 INPUT)

Connect this terminal to the sound output terminal of your VCR, etc. (See P.E-38 for the selection of audio input for video input.)

DownloadedE-8From TV-Manual.com Manuals

Fujitsu P-TE1000E, P-TE1010E, P42VHA20E User Manual

0+A RGB3 input terminal (RGB3 INPUT/BNC)

Connect this terminal to the PC's display (analog RGB) output terminal or decoder (digital broadcast tuner,etc.) output terminal. *When RGB3 input terminal is connected, Comp.video mode is not available. (See P. E-36.)

AComponent video input terminal (VIDEO4 INPUT)

Connect this terminal to the component video output (colour difference output) terminal of your HDTV unit or DVD player. *When Comp.video input terminal is connected, RGB3 mode is not available. (See P. E-36.)

B RGB3 synchronization switch (SYNC SW TTL/ANALOG (75 ))

This switch is used to terminate horizontal (H) terminal and vertical (V) terminal, out of RGB3 input terminals, with 75 .

TTL

: Does not terminate.

ANALOG (75 ):

Terminates.

C Video1 input terminal (VIDEO1 INPUT/P-TE1000E)

Connect this terminal to the SCART terminal of your VCR or DVD, etc. *See “SETTING THE INPUT TERMINALS” on E-35.

D S-Video input terminal (VIDEO2 INPUT/P-TE1010E)

Connect this terminal to the S-video output terminal of your VCR.

E Video input terminal (VIDEO1 INPUT/P-TE1010E)

Connect this terminal to the video output terminal of your VCR.

F Component video input terminal (VIDEO3 INPUT/P-TE1010E)

Connect this terminal to the component video output (colour difference output) terminal of your HDTV unit or DVD player.

Description of Input Terminals

DVI-D terminal (RGB1 INPUT/DVI-D)

English

RGB2 input terminal (RGB2 INPUT/mD-sub)

Pin No.

Input signal

Pin No.

 

Input signal

 

 

 

 

 

1

 

Red

9

 

 

 

 

 

2

 

Green

10

Ground

 

 

 

3

 

Blue

11

 

 

 

 

4

 

12

 

 

 

 

5

 

Ground

13

Horizontal synchronization

 

 

6

 

Ground

14

Vertical synchronization

 

 

7

 

Ground

15

 

 

 

 

8

 

Ground

Frame

Ground

 

SCART terminal

 

Pin No.

Input Signal

Pin No.

Input Signal

Pin No.

Input Signal

201816141210 8 6 4 2

1

 

8

 

15

Red/chrominance

 

 

2

Right audio

9

Green ground

16

 

 

3

 

10

 

17

 

 

4

Audio ground

11

Green

 

18

Composite video ground

 

 

5

Blue ground

12

 

19

 

 

6

Left audio

13

Red ground

20

Composite video/Y

211917151311 9 7 5

3 1

7

Blue

14

 

21

Ground

 

 

 

 

 

 

 

 

RS-232C terminal (RS-232C)

 

Pin No.

Signal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

DCD (Data Carrier Detect)

 

 

 

 

2

 

RD (Received Data)

 

 

 

 

 

3

 

TD (Transmit Data)

 

 

 

 

 

4

 

DTR (Data Terminal ready)

 

 

 

 

5

 

GND (Ground)

 

 

 

 

 

 

6

 

DSR (Data Set Ready)

 

 

 

 

 

7

 

RTS (Request To send)

 

 

 

 

 

8

 

CTS (Clear To Send)

 

 

 

 

 

9

 

RI (Ring Indication)

 

 

 

Downloaded From TV-Manual.com Manuals

E-9

PART NAMES AND FUNCTIONS (Continued)

REMOTE CONTROL

For details, see page

.

1 button

Switches between power ON and standby state.

3 DISPLAY OFF button

For showing on-screen-information.

4 PICTURE MODE button

Switches the picture mode.

7 RGB input mode selector button

[RGB 1 – 3]

Selects RGB 1 – 3.

9 Video input mode selector button

[VIDEO 1 – 3]

Selects VIDEO 1 – 3.

A Menu button [MENU]

Use this button to display a desired menu for adjusting the picture.

B Enter button [ENTER]

Press this button to finalize the selection of a desired menu or option within a menu.

2 MUTE button

Temporarily mutes the sound.

5 PICTURE MEMORY button

Recalls the PICTURE MEMORY.

6 WIDE button

Switches the screen over to a desired wide screen.

8RGB3/VIDEO4 input mode selector button [RGB3/VIDEO4]

Selects RGB3 or VIDEO4.

0Volume adjustment buttons [VOL +/– ]

Adjust the volume.

Press the + button to increase the volume. Press the – button to reduce

C Adjustment buttons

]

Use these buttons to scroll through options in a menu.

DownloadedE-10From TV-Manual.com Manuals

USING THE REMOTE CONTROL

PUTTING BATTERIES IN THE REMOTE CONTROL

English

1To remove the cover, slide it outwards while pressing it down.

2Place two AA batteries in the remote control. Make sure that the batteries are properly oriented.

3Close the cover until it snaps into place.

PRECAUTIONS

To prevent malfunction, be sure not to apply any form of severe shock to the remote control.

To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or heating equipment.

Be sure not to clean the remote control using a cloth dampened in any volatile solvent, such as benzene or thinner.

CAUTION: Be sure to use replacement batteries of the same type as the original ones.

When disposing of used batteries, please comply with governmental regulations or environmental public institution’s rules that apply in your country/area.

Note

The remote control will not function properly if the batteries are dead. Be sure to replace them as needed.

Do not use rechargeable batteries (Ni-Cd).

Downloaded From TV-Manual.com Manuals

E-11

USING THE REMOTE CONTROL (Continued)

EFFECTIVE RANGE FOR THE REMOTE CONTROL

Point the remote control at the display’s signal receiver when using it.

Make sure that there are no obstacles between the remote control and the display’s signal receiver.

Upper

20°

20° Lower

Display – side

Left

30°

30° Right

5 m (Front)

Display – front

Information

The remote control may not function properly if you use a high-frequency fluorescent lamp. If you experience problems, move the lamp or use the remote control from a different position.

DownloadedE-12From TV-Manual.com Manuals

CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT

Be sure to turn OFF the power to the display and external equipment before making any connections.

No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC model. Contact your dealer for more information.

RECEPTACLE

Make sure that the power cable’s grounding wire is grounded.

The display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you will need to have it replaced. Contact your dealer for more information.

CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT

Carefully check the terminals for position and type before making any connections.

Loose connectors can result in picture or colour problems. Make sure that all connectors are securely inserted into their terminals.

Ferrite cores

These ferrite cores are used to attenuate undesired signals.

Two big ferrite cores

When connecting a cable to the power input terminal, RS-232C terminal, attach one of these ferrite cores to the cable near the terminal.

Power Cable

RS-232C Cable

 

Ferrite Core

Ferrite Core

 

Two small ferrite cores

When connecting a cable to the external speaker output terminal attach one of these ferrite cores to the cable near the terminal.

English

Ferrite Core

Ferrite Core

Downloaded From TV-Manual.com Manuals

E-13

CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)

EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS

Speaker

Display

Speaker (optional)

Remote control

VCR or other external components See P.

VCR E-15

Satellite tuner E-17

PC E-18

DVD player

DownloadedE-14From TV-Manual.com Manuals

VCR

Connect the video signal cable to the SCART terminal. (When the P-TE1000E is installed.)

Connect the video signal to either the S-video input terminal or the video input terminal. (When the P-TE1010E is installed.)

To SCART output

To SCART input

An example of the underside of the display (with the P-TE1000E installed in the P42VHA10)

To video output

To S-video output

To audio output

To audio input

To S-video input

To video input

An example of the underside of the display (with the P-TE1010E installed in the P42VHA10)

Note

Unplug the power cord from the AC outlet before you connect external components.

Also refer to the instructions for the component to be connected.

When inputting audio, connect to the terminals corresponding to the used video input or RGB input.

English

Downloaded From TV-Manual.com Manuals

E-15

Loading...
+ 32 hidden pages