FUJITSU P17-1 User Manual

Download

answers

Monitor P17-1

Deutsch - English

Betriebsanleitu ng / O p e r ating Manual

Sie haben ...

... technische Fragen oder Probleme? Wenden Sie sich bitte an

unseren Help Desk (siehe Garantiehef t ). Aktuelle Informationen zu unseren Produkten, Tipps, Updat es usw. finden Sie im Internet:

http://www.fujitsu-siemens.com

Are there ...

... any technical problems or other questions you need clarifi ed?

Please contact our Help Desk (see Warranty Booklet).

The latest information on our produc t s, tips, updates, et c., can be found on the Internet under:

http://www.fujitsu-siemens.com

Dieses Handbuch wurde auf Recycling-Papier gedruckt. This manual has been printed on recycled paper. Ce manuel est imprimé sur du papier recyclé. Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt.

Herausgegeben von/Published by Fujitsu Siemens Computers GmbH

Bestell-Nr./Order No.: Printed in Taiwan AG 0303 03/03

A26361-K903-Z100-1-5E19

P17-1 LCD-Bildschirm LCD monitor

Deutsch

English

Betriebsanleitung Operating Manual

Ausgabe März 2003 March 2003 edition

TCO'03

VESA, DDC und DPMS sind eingetragene Warenzeic hen der Video Electronics St andards Association.

Zuwiderhandlungen verpflichten zu S chadenersatz. Alle Rechte vorbehalten, insbesondere für den Fall der Patenterteilung oder GM-Eintragung. Liefermöglichkeiten und technische Änderungen vorbehalten. Dieses Handbuch wurde erstellt von

cognitas. Gesellschaft für Technik-Dokumentation mbH www.cognitas.de

VESA, DDC and DPMS are registered trademarks of Video Electronics Standards Association.

All rights, includi ng ri ghts of translation, reproduction by printing, copying or s i milar methods, even of parts are reserved.

Offenders will be liable for damages. All rights, including rights creat ed by patent grant or registration of a utilit y model or design,

are reserved. Delivery subject to availability. Right of technical modification reserved. This manual was produced by

cognitas. Gesellschaft für Technik-Dokumentation mbH www.cognitas.de

Introduction........................................................................................................................................1

Notational conventions ..............................................................................................................2

Important notes..................................................................................................................................2

Safety notes ..............................................................................................................................2

Cleaning ....................................................................................................................................3

Transport...................................................................................................................................3

Power cable...............................................................................................................................4

Energy Star Guidelines..............................................................................................................4

CE marking................................................................................................................................4

FCC Class B Compliance Statement.........................................................................................5

Declaration of Conformity ..........................................................................................................5

Disposal and recycling...............................................................................................................6

Checking the contents of the consignment ........................................................................................7

Installing an ergonomic video workstation..........................................................................................7

Assembling and removing the monitor base ......................................................................................8

Mounting/removing lower section of monitor base .....................................................................8

Removing entire monitor base...................................................................................................9

Connecting the monitor......................................................................................................................9

Connecting cables to the monitor.............................................................................................10

Connecting cables to the computer..........................................................................................11

Operation of the monitor..................................................................................................................11

Adjusting height, rake and rotation...........................................................................................11

Adjusting portrait format...........................................................................................................12

Switching the monitor on/off.....................................................................................................12

Notes on power management..................................................................................................13

Changing the monitor settings .................................................................................................13

Notes on ergonomic colour adjustment............................................................................................19

Technical data................................................................................................................................. 20

VESA-DDC-compatible VGA interf ace.....................................................................................21

Preset operating modes...........................................................................................................21

Pin assignment D-SUB............................................................................................................22

Monitor port DVI-D...................................................................................................................22

Trouble shooting..............................................................................................................................23

A26361-K903-Z100-2-5E19 English

Introduction

Your new LCD (Liquid Crystal Displ ay) monitor P17-1 offers numerous features and functions, f or example:

• TFT display (Thin Film Transistor; active matrix)

• minimal space requirements thanks to slim cas i ng

• optimum ergonomic charact eri stics (totally di stortion-free, excellent pi cture definition and colour

purity right into the corners)

• high degree of brightness and good contras t

• high resolution (1280x1024) for displaying the information content of a conventional 19-inch

screen with CRT (Cathode Ray Tube)

• presentation of up to 16.7 million colours (i n conjunction with an appropriate graphics card)

• automatic scanning of hori zontal frequencies from 30 to 82 kHz and refresh rates (vertic al

frequencies) from 55 to 75 Hz (abs ol utely flicker-free)

• digital screen controlle r wi t h microprocessor for stori ng 33 di fferent display modes

• freely adjustable colour ali gnm ent for matching the screen c ol ours to the colours of various

input and output devices

• convenient operation via int egrated OSD (On-Screen-display) menu

• VESA-DDC compatibility

• VESA-FPMPMI compatibility (Flat Panel Monitor Physical Mounting Int erf ace) - mechanical

interface to swivel arm and wall bracket)

• plug&play capability

• power management for reducing power consumption when the computer is not in us e

• compliance with the recom m endations in accordance with TCO ’03

In normal screen mode (dark charac ters against a light background) the monitor satisfies the ergonomic requirements for the GS symbol.

This operating manual contains i m port ant information you require to st art up and run your LCD monitor.

A graphics card (screen c ontroller) with VGA interfac e or a di gi tal graphics card with DVI i nterface is required to control the P17-1 LCD monitor. The monitor processes the dat a supplied to it by the screen controller. The sc reen controller/the associated driver software is respons i bl e for setting the modes (resolution and refresh rate).

When putting the monitor into operati on for the first time, t he screen display should be optim al l y adapted to the screen controll er used and adjusted in accordance with your needs (see the "Changing the monitor settings" section in the"Operation of the monitor" chapter).

Target group

You don't need to be an "expert" to perform the operations described here. Do, however, read the "Important notes" chapter in the operating manual of the computer and in this operating manual.

In the event of any problems occurring, please contact your sales outlet or our help desk.

Additional information

Details of how you set t he resolution and refresh rate are provided in the documentation on your

screen controller/the as sociated driver software.

A26361-K903-Z100-2-5E19 English - 1

Colour monitor P17-1

Notational conventions

The meanings of the symbols and fonts used in this manual are as follows:

Pay particular attention to text marked with this symbol. Failure to observe this warning endangers your life, destroy s the device, or may lead to l oss of data.

Supplementary information, remarks, and tips foll ow this symbol.

Ê Text which follows this symbol describes activiti es that must be performed in the order shown.

"Quotation marks" indicate names of chapters or term s.

Texts in italics indicate filenames and menu items.

Important notes

In this chapter you will find information regarding s af et y which is essential to take note of with your monitor.

Safety notes

This device complies wi th the relevant safety regul at i ons for data processing equipment , i ncluding electronic office m achines for use in an office environment. If you have any questions, contact your sales outlet or our help desk.

• The display surface of t he LCD m oni tor is sensitive to pressure and scratches. Y ou should

therefore be careful with the display surface so as to avoid lasting damage (Newton rings, scratches).

• If the device is brought into the installation si te from a cold environment, c ondensation can

form. Before operating the devi ce, wait until it is absolutely dry and has reached approximately the same temperature as the installation site.

• During installation and before operati ng t he device, please observe the i nstructions on

environmental conditions i n the "Technical data" chapt er as well as the instructi ons in the "Installing an ergonomic video workstation" chapter.

• To ensure sufficient v entilation, the intake and exhaust air openings of the monitor must never

be blocked.

• The monitor automatically sets itself to a mai ns voltage in the range of 100 V to 240 V. Ensure

that the local mains voltage lies within these l i m i ts.

• Ensure that the power socke t on the device or the grounded mains outlet i s freely accessibl e.

• The ON/OFF switch does not disc onnect the device from the mains voltage. To completely

disconnect the mains voltage, remove the power plug from the socket.

• Lay all cables so that nobody can stand on them or trip over t hem . When attaching the device,

observe the relevant notes i n the "Connecting the monitor" chapter.

2 - English A26361-K903-Z100-2-5E19

Colour monitor P17-1

• If you use a different dat a cable from the one supplied, ensure that it is adequately shielded.

CE conformance and optimum picture quality are guaranteed only if you use the data cable

supplied.

• No data transfer cables shoul d be connected or disconnected during a t hunderstorm.

• Make sure that no objects (e.g. jewellery chains, paper clips, etc.) or liquids get inside the

device (danger of electric shock, short circ ui t ).

• In emergencies (e.g. damaged casing, elements or cables, penetration of liquids or foreign

matter), switch off the unit, disconnect t he power pl ug and contact your sales outl et or our help

desk.

• The screen background lighting contains mercury. You must observe the applicable handling

and disposal safety regulations for fluorescent t ubes.

• Only qualified technici ans should repair the device. Unauthori sed opening and incorrect repair

may greatly endanger the user (elec t ri c shock, fire risk).

• You may set only thos e resolutions and refresh rates s pecified in the "Technical dat a" chapter.

Otherwise you may damage your moni tor. If you are in any doubt, c ontact your sales outlet or

our help desk.

• Keep this operating manual together wi th your device. If you pass on the device to third part i es,

you should include this m anual .

Cleaning

• Always pull out the power plug bef ore you clean the monitor.

• Do not clean any interior parts yourself, leave this j ob t o a service technician.

• Do not use any cleaning agents t hat contain abrasives or may corrode plastic.

• Ensure that no liquid will run into the system.

• Ensure that the ventilation areas of the monitor are free.

• The display surface of t he LCD m onitor is sensitive to pressure and scratches. Cl ean i t only

using a soft, slightly moistened cloth. Wipe the monitor casing with a dry cloth. If the monitor is particularly dirt y, use a cloth which has

been moistened in mild domest i c detergent and then carefully wrung out.

Transport

• Transport the monitor with care and onl y in its original packaging or anot her corresponding

packaging fit to protect it against knocks and jolts .

• Never drop the LCD monitor (danger of glass breakage).

A26361-K903-Z100-2-5E19 English - 3

Colour monitor P17-1

Power cable

To guarantee safe operation, use the c abl e supplied. Use the following guidel i nes if it is necessary to replace the original cable set.

• The female/male receptacles of the cord set must m eet CEE-22 requirements.

• The cable has to be HAR-certified or VDE-c ertified. The mark HAR or VDE will appear on the

outer sheath or on the insulation of one of the inner conductors.

• For devices which are mounted on a des k or table, type SVT or SJT cable sets may be used.

For devices which sit on the floor, only SJT type cable sets may be used.

• The cable set must be selected according to the rated current for your device.

Energy Star Guidelines

The Fujitsu Siemens LCD colour m oni tor P17-1 is designed to conserv e electricity by droppi ng to less than 3 W when it goes into standby, suspend and OFF mode. With this new power management the P17-1 qualifies for the U.S. Environmental Protection Agency's (EPA) Energy Star Computers award.

The EPA estimates that computer equipment us es 5 % percent of all business elect ric ity and that this is growing rapidly. I f all desktop computers and peri pheral s enter a low-power mode when not in use, the overall savings in elect ric it y could amount to $ 2 thousand million annually. These s av i ngs could also prevent the emission of 20 million t ons of carbon dioxide into the atmosphere - the equivalent of 5 million automobiles.

As an Energy Star Partner, Fuj i t su Siemens Computers GmbH has determined that this product meets the Energy Star guidel i nes for energy efficiency .

CE marking

The shipped version of this device complies with t he requi rem ents of the EEC directives 89/336/EEC "Elect romagnet ic compatibility" and 73/23/EEC "Low voltage directive".

4 - English A26361-K903-Z100-2-5E19

Colour monitor P17-1

FCC Class B Compliance Statement

The following statement appli es to the products covered in this manual, unless otherwise specified herein. The statement for other product s will appear in the accompanying documentation.

NOTE:

This equipment has been tested and found to comply with the lim i ts for a "Class B" digit al device, pursuant to Part 15 of the FCC rules and m eets all requirements of the Canadian InterferenceCausing Equipment Regulations. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and c an radi at e radio frequency energy and, if not i nstalled and used in strict accordance with the instruc t i ons, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular ins t allation. If this equipment does cause harmful interference to radio or televi sion reception, which can be determ i ned by turning the equipment off and on, the user is encouraged to try to correct the interferenc e by one or more of the following measures:

• Reorient or relocate the receivi ng antenna.

• Increase the separation between equi pm ent and the receiver.

• Connect the equipment into an outl et on a circuit different from t hat to which the receiver is

connected.

• Consult the dealer or an experienced radio/ TV technician for help.

Fujitsu Siemens Computers GmbH is not responsible for any radi o or television interference c aused by unauthorised modificat i ons of this equipment or the substitution or attachment of connecting cables and equipment other than thos e specified by Fujitsu S i em ens Computers GmbH. The correction of interferenc e caused by such unauthorised modi f i cation, substitut i on or at tachment will be the responsibility of the user.

The use of shielded I/O cables is required when connecting this equi pment to any and all optional peripheral or host devices. Fai l ure to do so may violate FCC rules.

Declaration of Conformity

This device complies wi th Part 15 of the FCC Rules. Operation i s subject to the followi ng t wo conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference recei ved, including interference t hat may cause

undesired operation. Product name: Colour LCD Monitor

Trade name: Fujitsu Siemens Computers Inc. Model number(s): P17-1 Name of responsible party: Fujitsu Siemens Comput ers, Inc.

Contact person: Bernd Schroettle-Henning Phone No.: (408) 571-6051 Fax No.: (408) 571-6196

A26361-K903-Z100-2-5E19 English - 5

598 Gibraltar Drive Milpitas, CA 95035 - 6315 U.S.A.

Colour monitor P17-1

We, Fujitsu Siemens Computers, Inc., hereby decl are that the equipment bearing the trade name and model number specified above was tested conforming to the appli cable FCC rules under the most accurate measurem ent standards possible, and t hat al l the necessary steps have been taken and are in force to assure that production units of the same equipment will continue to comply with the Commissions requirements.

Disposal and recycling

This device has been manufac t ured to the highest possible degree from m aterials which can be recycled or disposed of in a manner that is not environmentally damaging. The device may be taken back after use to be recycled, provided that it is returned in a condition that is the result of normal use. Any components not recl aimed will be dis posed of in an environmentally acceptable manner.

If you have any questions on disposal, please contact your local office, our help desk, or:

Germany Belgium Switzerland

Fujitsu Siemens Computers

GmbH Remarketing und Recycling D-33106 Paderborn Tel.: +49 5251 / 81 80 10

Fax: +49 5251 / 81 80 15

http://www.fujitsu-siemens.de/wvm

RECUPEL

Boulevard Reyers, 80 B-1030 Brussels Tel.: +32 2 / 706 86 16 Fax: +32 2 / 706 86 13

E-Mail: info@recupel.be

http://www.recupel.be

SWICO Schweizerischer Wirtschaftsverband der Informations-, Kommunikations- und Organisationstechnik

A list of the SWICO Acceptance places can be found at:

http://www.swico.ch

6 - English A26361-K903-Z100-2-5E19

Colour monitor P17-1

Checking the contents of the consignment

Ê Unpack all the individual parts. Ê Check the delivery for damage incurred during transportation. Ê Check whether the delivery agrees with the details in the delivery note.

The complete LCD monitor package i ncludes:

− one monitor

− one monitor base

− one cover

− one data cable (D-SUB)

− one data cable (DVI-D)

− one audio cable

− one power cable

− one CD with Pivot software

− one floppy disk for the moni tor picture calibration

− one Warranty Booklet

− this operating manual

Should you discover that the delivery does not correspond t o the delivery note, notify your local sales outlet immediat el y.

It is recommended not to throw away the original packaging mat eri al . Keep it for future transportation.

Installing an ergonomic video workstation

Before you set up your equipment , you should select a suit abl e position for working at the monit or. Please observe the following advice when installing a video workstation.

1 = Window Avoid direct and reflect ed glare.

A26361-K903-Z100-2-5E19 English - 7

Avoid glare from electric lighting.

600 mm 600 mm

1 = Edge of desk 2 =

Permissible reaching

sector

Position the keyboard where it is easiest to reach.

Colour monitor P17-1

0°

60°

1 = Preferable viewing sector

Permissible viewing sec tor

2 = Position the monitor for

optimum viewing. The viewing distance to the monitor should be approximately 50 cm.

Depending on the situation, the use of a s wivel arm or wall bracket (VESA FPMPMI), are available from specialised dealers , m ay be advisable. For this purpos e t he m oni tor base must be removed beforehand as described in "Assembling and removing the monitor bas e" chapter.

65°

30°

Keep ventilated areas clear.

1 =

approx. 90° and more approx. 90°

2 = Remember to maintain correct

posture.

Assembling and removing the monitor base

The monitor surface is susceptible to scratc hi ng! Therefore, lay the monitor on a soft surface when mounting or removing the monitor base.

Mounting/removing lower section of monitor base

When delivered the lower section of the monitor base is removed. I f you do not want to use a swivelling arm or a wall mounti ng, you must mount the lower section of the monitor base.

Mounting lower section of monitor base

Ê Lay the monitor on its face on a soft

surface.

Ê Push the lower section of the monitor base

in the upper section until it engages.

Removing lower section of monitor base

If you want to pack the monitor, you must remove the lower section of the monitor base.

Ê Lay the monitor on its face on a soft

8 - English A26361-K903-Z100-2-5E19

surface.

Ê Press on the release button (1) and pull off

the lower section.

Colour monitor P17-1

Removing entire monitor base

Before you can use a swivel arm or a wal l bracket, you must remove the entire monitor base:

The monitor surface is susceptible to scratc hi ng!

Ê Switch off the monitor and pull the power plug out of the power socket.

Ê Lay the monitor on its face on a soft

surface.

Ê Remove the cover and disconnect all

cables.

Ê Remove the four screws on the rear of the

monitor.

You can now mount a swivel arm or a wall bracket as per VESA FPMPMI with 100 mm hole spacing.

For instructions on how to mount the swivel arm or wall bracket, please see the documentation for the swivel arm or wall brac ket.

Connecting the monitor

Observe the "Safety not es" in the "Important notes " chapter in this operating manual.

CE conformance and optimum picture quality are guaranteed only if you use the data cable supplied.

Do not cover the ventilat i on openi ngs of the monitor. The computer power plug must be pulled out!

Ê Be sure that the monitor and the computer are swit ched off.

A26361-K903-Z100-2-5E19 English - 9

Colour monitor P17-1

Connecting cables to the monitor

The monitor ports are protected by a cover. The cover is not att ached on delivery.

1 = Cover 2 =

Security slot for "Kensington Lock"

3 =

Power connector

4 =

D-SUB connector (ANALOG)

The data cables supplied have two 15-pi n D-SUB connectors / two 24-pin DVI connectors for connection to the monitor and to the computer.

DVI-D connector (DIGITAL)

5 = 6 =

Headphones port

7 =

AUDIO-IN connector

Ê Select the suitable data cable for your computer.

Digital graphics card wit h DV I interface: DVI connector Graphics card with VGA in t erface: D-SUB connector

Information on the computer connections and interfaces i s contained in the operating manual for your computer.

After switching on the m oni tor you must select the desired input with the OSD menu (see "Operation of the monitor" c hapter).

Ê Connect one of the connectors of the data cabl e t o the D-SUB connector (4) or the DVI-D

connector (5) on the monitor and sec ure the plug-in connection by tight eni ng the safety screws.

Ê Insert one plug of the audio line in the AUDIO IN (7) socket on the monitor and make sure i t is

properly engaged.

Ê Plug the power cable supplied into the power connector (3) of the monitor. Ê Mount the cover (1) over the connections.

A lock (Kensington Loc k) can be mounted in the security slot (2) to protect the moni tor from theft. A Kensington Lock is not included in the consignment of the monitor.

10 - English A26361-K903-Z100-2-5E19

Colour monitor P17-1

Connecting cables to the computer

Information on the computer connections and interfaces i s contained in the operating manual for your computer.

If your computer has two m oni tor ports ("onboard" screen control l er and separate graphics card), the monitor port for the separate graphics card i s usually active.

Ê Connect the data cable to the (active) monitor port on the computer and secure the pl ug-i n

connection by tightening the safety screws.

Ê Insert the other plug of the audio line in the audio output of the computer. Ê Plug the connector of the mains cable provi ded i nto the monitor outlet of the c om puter or into a

properly earthed outlet and ensure a saf e connection.

Ê Plug the power connector of the computer into a properly grounded mains outlet.

When you start working with y our monitor for the first ti m e you should install the appropriate graphics drivers f or your application software. Det ails of how to do this are

provided in the documentation on y our screen controller/the ass ociated driver software.

Operation of the monitor

The monitor offers the following possibilities t hat enable it to be optimally adjusted for the respective user and the respective si tuation.

Adjusting height, rake and rotation

The monitor height can be adjusted within a range of approx. 2.5 inch/50 mm .

Ê Grasp the monitor with both hands on the right and left edge of the casing and move it upward

or downward.

The rake of the monitor can be adjusted by -5°

15°

5°

A26361-K903-Z100-2-5E19 English - 11

90°

(forward) and +15° (back) from its vertical position.

Ê Grasp the monitor with both hands on the

right and left edge of the casi ng and adj ust it to the desired rake.

The monitor can be turned 90 horizontally in a clockwise directi on from its central posit i on.

Ê Grasp the monitor with both hands on the

right and left edge of the casi ng and rotate it into the desired position.

Colour monitor P17-1

Adjusting portrait format

The monitor can be turned from the "wide format" (landscape mode) into the " high format" position (portrait mode).

Ê Grasp the monitor with both hands on the right and left edge of the casing, move it i nto the

highest position and turn it clockwise until it is in the portrait position.

You must use corresponding s oftware (pivot software) so t hat the screen display is al so shown in the portrait mode. This software is included in the deli very (CD-ROM) and must

be installed on your computer. In the OSD menu you have the option of switching the OSD manually from landscape

mode into portrait mode (see also the section "Monitor set tings using the OSD menu").

To reset the monitor to the lands cape mode, the monitor must be t urned counter-clockwise. The OSD display can be reset again i n the OSD menu.

Switching the monitor on/off

1 = ON/OFF switch 2 =

Power indicator

3 =

Buttons for the OSD menu

(On-Screen-display)

4 =

Headphones port

1 4

The ON/OFF switch (1) is used for switching the monitor on and off. The power indicator (2) glows green when the monitor and computer are switched on. The power

indicator glows orange when the monitor does not receive a video signal or i s in the energy-saving mode. The power indicator goes off when the monitor is switched off.

When you switch the comput er system on, you must proceed in the following order:

Ê First switch on the LCD monitor with the ON/OFF s wi tch (1). Ê Then switch on the computer.

If your computer has a power management function (energy-saving m ode), you should read the "Notes on power management" section in this chapter.

12 - English A26361-K903-Z100-2-5E19

Colour monitor P17-1

Notes on power management

If your computer is equipped wi th power management, the monitor can support this function ful l y. Here the monitor does not disti ngui sh between the individual energy-sav i ng modes of the computer (standby mode, suspend mode and OFF mode), as it is capable of imm edi at el y switching into the mode with the highest energy-saving effect.

Stage ON Energy-saving mode

Power indicator lights green glows orange

Function the monitor is working

normally

Power consumption normal < 45 W reduced to < 3 W

If your computer detect s inactivity (no input) it sends an appropriate signal t o t he monitor to reduce the power consumption (energy-sav ing mode). The power indicator of the monit or changes colour to indicate the status change.

Once an input is made at the com puter the screen contents are redrawn and f ul l power i s restored. For detailed information on how energy-saving mode operates refer to the operating m anual or

technical manual of the c om puter.

When the monitor is switc hed to the energy-saving mode by the power managem ent system a power consumption of up to 3 W is maintained to feed the circuit for redrawing

the screen contents. To completely switc h off the power consumption, swi tch off the computer or pull t he pl ug

of the monitor power cable out of t he monitor socket of the computer.

the screen is dark

Changing the monitor settings

When putting the monitor into operati on for the first time, t he screen display should be optim al l y adapted to the screen controll er used and adjusted in accordance with your needs.

Basic monitor settings with the floppy disk supplied

If one of the operating systems Windows 95/98, Windows NT, Windows Me, Windows 2000, Windows XP or OS/2 (with Windows em ul ation installed) is used, the basic monitor setti ngs can be set with the floppy disk supplied.

Ê Insert the supplied floppy disk int o the floppy disk drive. Ê Open the Readme file on the floppy disk and follow the instructions in the file.

Your monitor should now already be properly adj usted. If none of the above operati ng systems is used or minor corrections are t o be m ade t o the screen display, then c hange the monitor settings with the OSD menu.

A26361-K903-Z100-2-5E19 English - 13

Colour monitor P17-1

Changing the monitor settings with the buttons of the control panel

1 = Buttons for the OSD menu

(On-Screen-display)

Use the buttons of the control panel to make the following m oni tor settings directly while the OSD menu is switched off.

Performing auto-adjustment of the monitor

2 = Power indicator 3 =

ON/OFF switch

Ê Press the AUTO button for approx. 1 second while the OSD menu is switched off .

The Auto Processing message is di splayed. Picture quality and posi tion are set to optimum values for your system.

Adjusting background lighting

Ê Press the button for calli ng t he Brightness sett i ng wi ndow. Ê Press the

This setting window can als o be called, when the OSD menu is locked.

Activating/deactivating muting

or 5 button to adjust the brightness.

Ê Press the button to switch the s ound off and on again.

A message is displayed that the action has been performed.

Locking the OSD menu

The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.

Ê Press and hold the SELECT/MENU button for a f ew seconds while you switc h on t he m oni tor

with the ON/OFF switch. A message is displayed that the action has been performed. Please proceed in the same manner t o rel ease the locked OSD menu again.

Locking the ON/OFF button

The ON/OFF switch can be locked to prevent accidental or unauthoris ed changes to the monitor settings.

Ê Press and hold both buttons

A message is displayed that the action has been performed. Please proceed in the same manner to rel ease the locked ON/OFF switch agai n.

14 - English A26361-K903-Z100-2-5E19

and 5 simultaneously for a few seconds.

Colour monitor P17-1

Monitor settings using the OSD menu

With the buttons on the cont rol panel , call up and use the integrated OSD (On-Screen display) menu.

The OSD menu is available in different languages. The English menu names are used in the following description (default setting). With t he OS D function Language in the OSD

Setup you can select another language.

To set the OSD menu, perform the following steps:

Ê Press the SELECT/MENU button to act i vate the OSD menu.

The main menu appears on the screen (on the lef t-hand side) with icons for the setting functions.

The first symbol (Brightness/Contrast) is highlighted. In the righthand part of the display the associated functions are shown.

Ê If necessary, press the

mark another icon (e.g. Image adjust).

Ê Press the SELECT/MENU button to select

the highlighted icon.

or 5 button to

The corresponding setting window (here: Image Adjust) is displ ayed (on the right-hand side).

The first function (H-Position) is highlight ed.

Ê If necessary, press the

mark another icon.

or 5 button to

Ê Press the SELECT/MENU button to select

the highlighted function.

Ê Press the

value for the selected f unction.

or 5 button to adjust the

Ê Press the EXIT/AUTO button to exit the

function.

Ê If necessary, press the button

mark another function or press the EXIT/AUTO button to return to the main menu.

All changes are stored automatically.

A26361-K903-Z100-2-5E19 English - 15

or 5 to

Colour monitor P17-1

If you want to change other settings, select t he corresponding function from the OS D m ai n m enu. All possible adjustments of the main menu are described in the following.

The OSD menu for analogue monitor operation is described in the following. During digi tal operation some functions are not available, as they are not requi red due to the digital

transmission technol ogy used.

Adjusting the brightness and contrast

Calling the Brightness / Contrast setting window.

Brightness

Contrast

Black Level

Auto Level

Adjusting size and position

H-Position

V-Position

Clock

Phase

Setting the brightness of the display With this function you change the brightness of the bac kground lighting.

Setting the contrast of the display With this function you modify the contrast of bri ght colour tones.

Setting the brightness of the display With this function you modify the contrast of dark colour tones.

Setting the brightness of the display With this function you can automatically s et the contrast. Press the SELECT/ME NU but ton to activate the func t i on.

If the contrast is set too high, bright surfac es can no longer be distinguished from very bright surfaces. If the contrast is set too low, the maximum brightness will not be achieved.

Calling the Image adjust setting window

Adjusting the horizontal position With this function you move the picture to the lef t or to the right.

Adjusting the vertical position With this function you move the picture up or down.

Setting synchronis ation With this function you adjust the picture width t o el i m i nate vertical picture

disturbances. Eliminating picture interference

With this function you fine-tune your monitor to elim i nate picture interference.

16 - English A26361-K903-Z100-2-5E19

Adjusting the volume

Calling the Audio setting window

Colour monitor P17-1

Volume

Mute

Setting the volume for pl ayback with the integrated loudspeakers Switching the loudspeakers off or on

Setting colour temperature and colours

Calling the Colour setting window

Selecting the colour tem perature The "warmth" of the screen col ours is set using the colour t emperature. The colour

temperature is measured in K (= K el vin). You can select from sRGB, 6500 K, 7500

K, 9300 K, Native and Custom Colour. sRGB

Native Custom Colour

= setting colour display according to the sRGB standard = Original colour of the LCD display = User-defined colours

In the user-defined setting you can change the colour ratios of the basic colours (red, green, blue) as required.

Setting display of the OSD menu

Calling the OSD Setup setting window

Language

Setting language for the OSD menu With this function y ou choose between English (default setting), French, German,

Italian and Spanish as the language for the OSD menu.

OSD

H-Position

OSD

V-Position

OSD

Timeout

Setting the horizontal pos i tion of the OSD menu With this function you move the OSD menu to the left or to the right.

Setting the vertical position of the OSD menu With this function you move the OSD menu up or down.

Setting the display durat i on of the OSD menu With this function you select a value from 10 to 120 s econds. If the set time ex pi res without a setting being made, the OSD menu is

automatically faded out .

OSD

Rotation

Setting the display f orm at of the OSD menu With this function you switch the OSD menu from portrai t mode to landscape

mode and vice versa.

OffOn= The OSD menu is displayed in lands cape mode.

= The OSD menu is displayed in portrait mode.

A26361-K903-Z100-2-5E19 English - 17

Colour monitor P17-1

Setting functions in the "Advanced " menu

Calling the Advanced setting window

Input select

Resolution

Notifier

Factory Recall

Displaying information

Selecting input signal With this function you switch the screen from the analogue to the digital mode and

vice versa. The condition is that the graphic card used supports this function.

Displaying monitor data The optimum resolution for thi s monitor is 1280 x 1024 pixels . Wi th the function

activated (On), a mes sage appears on the screen after approx. 30 seconds if a different resolution is set.

Change the resolution to 1280 x 1024 to ac hi eve optimum picture quality . With the function deactivated ( Off), no message appears.

Activating the factory settings With this function al l settings are reset to the f actory settings wit hout prompting for

confirmation. Press the SELECT/ME NU but ton to activate the function. The Auto Processing

message is displayed.

Calling the Information setting window With this function t he model designation, serial number, resolution, H/V frequency,

input signal and polarity of the synchronisation signal are displayed.

18 - English A26361-K903-Z100-2-5E19

Colour monitor P17-1

Notes on ergonomic colour adjustment

If you select col ours for the display in your appli cation programmes, take note of the information below.

The primary colours blue and red on a dark background do not produce the minimum required contrast of 3:1 and are therefore not suitable for continuous t ext and data entry.

When using several colours f or characters and background and giving the primary colours full modulation, you can obtain v ery suitable colour combinat i ons (see the following table):

Background

black white purple blue cyan green yellow red black + + - + + + white + + + - - - +

purple + + - - - - -

blue - + - + - + -

cyan + - - + - - -

green + - - + - - -

yellow + - + + - - +

red - + - - - - +

+ Colour combination very suitable

- Colour com bi nation not suitable because col our l ocations are too close toget her, thin characters are not identif i abl e or ri gorous focusing is demanded of the hum an eye.

Characters

A26361-K903-Z100-2-5E19 English - 19

Colour monitor P17-1

Technical data

Dimensions and weight (LCD monitor)

Visible diagonals: 43 cm Dot pitch: 0.264 mm Screen size: 337.9 mm x 270.3 mm Maximal resolution: 1280 x 1024 pixels Dimensions (W x H x D) inc l.

monitor base: Dimensions cardboard box

(W x H x D): Weight: approx. 6.5 kg

Accessories: Power cable (1.8 m)

Storable display modes: 33 Electrical data

Video: analogue, positive, 0.7 V

Synchronisation: Separate Sync. TTL, positive or negative

Horizontal frequency: 30 kHz .... 82 kHz (multi-scanning)

Refresh rate: 55 Hz .... 75 Hz

Maximum pixel rate: 135 MHz Power supply: switches automatically

Total power consumption: < 45 W (ON, Normal mode)

Sound output: 1.5 W left; 1.5 W right

397.3 mm x 439.5 - 509.5 mm x 240 m m 490 mm x 214 mm x 560 mm

D-SUB data cable (1.8 m) DVI-D data cable (1.8 m) Audio cable (1.8 m)

, 75 Ω

digital: DVI-D

100 V - 240 V, 50 Hz - 60 Hz

< 3 W in the energy-saving mode (standby mode, suspend mode and OFF mode)

± 2 Hz, 1.5 A - 0.7 A

Environmental conditions

Environment class 3K 2, IEC 721 Rated range of operation:

Humidity: Limit range of operation:

Humidity: Condensation must be avoided.

20 - English A26361-K903-Z100-2-5E19

15 °C .... 35 °C

20 % .... 85 %

5 °C .... 35 °C

20 % .... 85 %

Colour monitor P17-1

VESA-DDC-compatible VGA interface

Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video Electronics Standard Association, Display Data Channel) is used as the c om munications interface between the monitor and the computer. If your computer is equipped with a VESA-DDC-compatible VGA interface, it can automatically read the dat a for ensuring optimum operation from y our m oni tor and select the appropriate set t i ngs.

If the monitor P17-1 is not yet displayed in the list of monitors, you can s el ect the following monitor instead:

Fujitsu Siemens 4311FA, 4312 FA, 43B1-M

Preset operating modes

The picture position and siz e have been set to optimum values at the factory for the operating modes listed above. Dependi ng on the screen controller used, it may be

necessary to adjust the display position and size. In this case, you can change and save the settings (see "Operat ion of the monitor").

The following are the most frequentl y used of the preset operating modes :

Horizontal frequency Refresh rate Screen resolution

31.5 kHz

37.5 kHz

37.9 kHz

46.9 kHz

48.4 kHz

60.0 kHz

79.9 kHz

For ergonomic reasons, a screen resolution of 1280 x 1024 pixels is recommended. Because of the technology used (active matrix) an LCD monitor provides a totally flicker-f ree pi cture even with a refresh rate of 60 Hz.

70 Hz 60 Hz 75 Hz 60 Hz 75 Hz 60 Hz 75 Hz 60 Hz 75 Hz

720 x 400 640 x 480 640 x 480 800 x 600

800 x 600 1024 x 768 1024 x 768

1280 x 1024 1280 x 1024

A26361-K903-Z100-2-5E19 English - 21

Colour monitor P17-1

Pin assignment D-SUB

Pin Meaning Pin Meaning

1 Video input red 9 +5 V (DDC) 2 Video input green 10 Sync. ground 3 Video input blue 11 Ground 4 Ground 12 DDC-Data 5 Ground 13 H. sync 6 Red video ground 14 V. sync 7 Green video ground 15 DDC Clock 8 Blue video ground

Monitor port DVI-D

Pin Meaning Pin Meaning Pin Meaning

1 T M DS Data2- 9 TMDS Dat a1- 17 TMDS Data02 T M DS Data2+ 10 TMDS Data1+ 18 TMDS Data0+ 3 TMDS Data 2/4

Shield 4 not connected 12 not connected 20 not connected 5 not connected 13 not connected 21 not connected 6 DDC Clock 14 +5V Power 22 TMDS Clock Shield 7 DDC Data 15 Ground 23 TMDS Clock+ 8 Analogue Vertical

Sync

22 - English A26361-K903-Z100-2-5E19

11 TMDS Data 1/3

Shield

16 Hot Plug Detect 24 TMDS Clock-

19 TMDS Data 0/5 Shield

Colour monitor P17-1

Trouble shooting

Should an error occur, first check the following points. If t he distortion is still not eliminated, the monitor should, if poss i bl e, be checked on another computer and/or wi th another data cable.

If you are unable to solve t he probl em , please inform our help desk.

Having this problem? Check the following points:

No screen display (power indicator does not light)

No screen display (power indicator lights)

Message:

No Signal

Message:

Frequency out of range: ## kHz / ## Hz

Please change the display mode to 1280x1024 with 60 Hz.

Picture position is not correct The monitor recognises an undefined mode (see

Ê Check whet her the monitor is switched on. Ê Check whet her the power cable on the

monitor is connected c orrectly.

Ê Check whet her the computer is switched

on.

Ê Check whet her the computer is switched

on.

Ê Check whet her the data cable for the

monitor is correctly attached to the monitor port on the computer.

Ê Press any key on the computer keyboard -

the computer may be in energy s aving mode.

Ê Alter t he bri ghtness and/or contrast unt i l

you get a picture.

Ê Check whet her the data cable for the

monitor is correctly attached to the monitor port on the computer.

Ê Check whet her the computer is switched

on.

The input signal (horizontal frequency and refresh rate) at the display ed i nput does not correspond to the technical m oni tor data.

Ê Adjust the video frequency range using the

computer software (see docum entation for your computer or your graphics card).

"Technical data").

Ê Press the EXIT/AUTO button to perform the

auto-adjustment of the screen.

Ê Set the pi cture position with the OSD m enu

(see "Operation of the monitor" ).

A26361-K903-Z100-2-5E19 English - 23

Colour monitor P17-1

Having this problem? Check the following points:

Picture is shaking Ê Check whether the data cable for the

monitor is correctly attached to the monitor port on the computer.

Ê Press the EXIT/AUTO button to perform the

auto-adjustment of the screen.

Picture disturbances (vertical lines) Ê Press the EXIT/AUTO button to perform the

auto-adjustment of the screen.

Picture disturbances (hori zontal lines, picture noise)

The screen becomes darker

Ê Press the EXIT/AUTO button to perform the

auto-adjustment of the screen.

The background lighting has a limited lifetime. If your monitor display shoul d become too dark, the background lighting will have to be exchanged.

Ê Please contact our help desk.

Permanently unlit or lit pi xels The standard of production techniques today

cannot guarantee an absolutely fault-free screen display. A few isol ated constant lit or unlit pi xels may be present. The maximum permitted number of pixels faults i s stipulated in the stringent international s t andard ISO 13406-2 (Class II).

Example: a 17" flat-s creen monitor with a resolution of 1280 x 1024 has 1280 x 1024 = 1310720 pixels. Each pixel consists of three subpixels (red, green and blue), s o t here are almost 4 million dots in total. According to ISO 13406-2 (Class II), a maximum of 6 pixels and 7 subpixels may be defective, i. e. a total of 25 faulted dots . This corresponds to approx. 0.00062 % of the entire s creen surface!

24 - English A26361-K903-Z100-2-5E19

TCO'03

Congratulations

The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment.

Some of the features of the TCO’03 Display requirements:

Ergonomics

• Good visual ergonomics and image quality in order to improve the working environment for the

user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability.

Energy

• Energy-saving mode after a certain time – beneficial both for the user and the environment

• Electrical safety

Emissions

• Electromagnetic fields

• Noise emissions

Ecology

• The product must be prepared for recycling and the manufacturer must have a certified

environmental management system such as EMAS or ISO 14 000

• Restrictions on

− chlorinated and brominated flame retardants and polymers

− heavy metals such as cadmium, mercury and lead.

The requirements included in this label have been developed by TCO Development in cooperation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more userfriendly direction. Our labelling system started with displays in 1992 and is now requested by users and IT-manufacturers all over the world.

For more information, please visit: www.tcodevelopment.com

TCO'03 - 1

FUJITSU P17-1 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Contents

Introduction

Notational conventions

Important notes

Safety notes

Cleaning

Transport

Power cable

Energy Star Guidelines

CE marking

FCC Class B Compliance Statement

Declaration of Conformity

Disposal and recycling

Checking the contents of the consignment

Installing an ergonomic video workstation

Assembling and removing the monitor base

Mounting/removing lower section of monitor base

Removing entire monitor base

Connecting the monitor

Connecting cables to the monitor

Connecting cables to the computer

Operation of the monitor

Adjusting height, rake and rotation

Adjusting portrait format

Switching the monitor on/off

Notes on power management

Changing the monitor settings

Basic monitor settings with the floppy disk supplied

Changing the monitor settings with the buttons of the control panel

Monitor settings using the OSD menu

Notes on ergonomic colour adjustment

Technical data

VESA-DDC-compatible VGA interface

Preset operating modes

Pin assignment D-SUB

Monitor port DVI-D

Trouble shooting

TCO'03