FUJITSU NA19026-C081A Specification

Global LCD Panel Exchange Center

To :

㩷
㩷

Specification of FUJITSU TFT-LCD module

㩷
㩷
㩷

NA19026-C081A

㩷

㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷
㩷

㩷

㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷㩷Specification No. : Tech Bes LCD-00225

Date：

By ：

This Product is designed, developed and manufactured as contemplated for general use, including without
limitation, general office use, personal use, household use, and ordinary industrial use, but is not designed,
developed and manufactured as contemplated for use accompanying fatal risks or dangers that, unless
extremely high safety is secured, could lead directly to death, personal injury, severe physical damage or other
loss (hereinafter “High Safety Required Use”), including without limitation, nuclear reaction control in
nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system,
missile launch control in weapon system. If customer’s product possibly falls under the category of High
Safety Required Use, please consult with our sales representatives in charge before such use. In addition,
FDTC shall not be liable against the customer and/or any third party for any claims or damages arising in
connection with the High Safety Required Use of the Product without permission

www.panelook.com

Approval

.

Issue Date : Oct. 15, 2003

Issued by :
F. Yamada

Director
Design Dept.
LCD Products Div.

FUJITSU DISPLAY TECHNOLOGIES CORPORA TION

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com



ޣNA19026-C081Aޤ

㪘㩷

TABLE OF CONTENTS

1.APPLICATIONS.......................................................................................................... 2

2.PRODUCT NAME AND MODEL NAME

2-1.Product Name ......................................................................................................... 2

2-2.Model Name ............................................................................................................ 2

3.OVERVIEW ................................................................................................................. 2

4.CONFIGURATION...................................................................................................... 2

㪙㩷

㪚㩷 㪚

5.MECHANICAL SPECIFICATIONS ........................................................................... 3

6.ABSOLUTE MAXIMUM RATINGS ........................................................................... 4

7.RECOMMENDED OPERATING CONDITIONS....................................................... 4

8.ELECTRICAL SPECIFICATIONS............................................................................. 5

9.OPTICAL SPECIFICATIONS..................................................................................... 7

10.INTERFACE SPECIFICATIONS

10-1.Signal descriptions ............................................................................................... 11

10-2.Color Data Assignment ........................................................................................ 14

10-3.Input Signal Timing ............................................................................................. 15

10-4.Correspondence between Data and Display Position ......................................... 17

㪛㩷

10-5.Power Supply Sequence ....................................................................................... 17

11.BACKLIGHT SPECIFICATIONS

11-1.Pin Configuration for Backlight........................................................................... 18

11-2.CCFL ..................................................................................................................... 18

11-3.Life......................................................................................................................... 18

11-4.Lamp Assembly Set (for Replacement) ................................................................ 18

12.APPEARANCE SPECIFICATIONS ......................................................................... 19

13.ENVIRONMENTAL SPECIFICATIONS ................................................................. 20

㪛

14.INDICATIONS .......................................................................................................... 21

15.PACKAGING ............................................................................................................. 21

16.PRECAUTIONS ........................................................................................................ 26

17.PRECAUTIONS FOR USE....................................................................................... 29

18.MISCELLANEOUS................................................................................................... 29

㪜

㪛㪘㪫㪜㩷 㪛㪦㪚㪬㪤㪜㪥㪫㩷㪚㪦㪥㪫㪩㪦㪣㩷㪪㪜㪚㪫㪠㪦㪥㩷

02 20031015 SEKIDO TAKAHASHI YAMADA add P19

㪜㪛㪠㪫㩷

㪛㪘㪫㪜㩷

㪛㪜㪪㪠㪞㪅㩷

20031002

㪛㪜㪪㪠㪞㪅㩷 㪛㪜㪪㪚㪩㪠㪧㪫㪠㪦㪥

㪚㪟㪜㪚㪢㩷

Sekido Takahashi Yamada

㪘㪧㪧㪩㪅㩷

㪚㪟㪜㪚㪢㩷

FUJITSU DISPLAY TECHNOLOGIES

㪘㪧㪧㪩㪅

NA19026-C081A

Tech Bes LCD-00225

CORPORATION

㪈㩷

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

㪚㪬㪪㪫㪅

䌓
䌈
䌅

1

/

䌅
䌔

www.panelook.com

1. APPLICATIONS

2. PRODUCT NAME AND MODEL NAME

3. OVERVIEW

4. CONFIGURATION

Global LCD Panel Exchange Center

www.panelook.com

ޣNA19026-C081Aޤ

This specification is applied to the 17.0 in. XGA-WIDE supported TFT-LCD module.

㪘㩷

2-1. Product Name

: LCD Module

2-2. Model Name

: NA19026-C081A

㪙㩷

This LCD module has a TFT active matrix type liquid crystal panel 1280×768 pixels, and
diagonal size of 43cm (17.0-inch). This module supports 1280×768 XGA-WIDE mode
(Non-interlace).
This LCD has a XGA-WIDE-capable 1ch-LVDS interface and can display 16 million colors.
By timing control signal, images are displayed on the screen at given value under specified
timing.

㪚㩷 㪚

Control signals to this LCD module are ENAB (Data enable signal), DCLK signal and RGB
data signal. Data signal is transmitted with single port. (8 bit for each R, G, B)
The power supply of this LCD module is +5V DC.



㪛㩷

This LCD module consists of a color TFT-LCD panel that mounted with TFT driver ICs, a
cold-cathode fluorescent tube back-light, a LVDS interface PCB, a structure and a bezel. And
these components are integrated in a LCD module.
Cold-cathode fluorescent tube and lamp holder are replaceable.
Fig.4-1 shows a block diagram of this LCD module.

㪛

㪜

㪛㪘㪫㪜㩷 㪛㪦㪚㪬㪤㪜㪥㪫㩷㪚㪦㪥㪫㪩㪦㪣㩷㪪㪜㪚㪫㪠㪦㪥㩷

NA19026-C081A

㪜㪛㪠㪫㩷

㪛㪜㪪㪠㪞㪅㩷

㪛㪘㪫㪜㩷

㪛㪜㪪㪠㪞㪅㩷 㪛㪜㪪㪚㪩㪠㪧㪫㪠㪦㪥

㪚㪟㪜㪚㪢㩷

㪘㪧㪧㪩㪅㩷

㪚㪟㪜㪚㪢㩷

㪘㪧㪧㪩㪅

Tech Bes LCD-00225

FUJITSU DISPLAY TECHNOLOGIES

CORPORATION

㪈㩷

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

㪚㪬㪪㪫㪅

䌓
䌈
䌅

2

/

䌅
䌔

www.panelook.com

5. MECHANICAL SPECIFICATIONS

Global LCD Panel Exchange Center

㪘㩷

㪙㩷

Input signal

RxCLK‐
RxCLK+
Rx0‐
Rx0+
Rx1‐
Rx1+
Rx2‐
Rx2+
Rx3‐
Rx3+

Power supply

＋５Ｖ ＤＣ

Interface circuit

DC/DC converter

Bias power supply

DC

(Separate)

Inverter

www.panelook.com



ޣNA19026-C081Aޤ

Data Driver

ＬＣＤ panel

1280×3(RGB)×768

Gate Driver

Back light
(CCFL)

㪚㩷 㪚

Figure 4-1. Block Diagram

Table 5-1 shows the mechanical specifications of this LCD module.

㪛㩷

Table 5-1. Mechanical Specifications

Item Specifications Unit Remark

Dimensions 413.8×263.5×18.4(TYP.)

Display Resolution (1280×3) ×768 —

Display Dot Area 369.6×221.76 mm

Dot Pitch (0.09625×3) ×0.28875 mm

Aspect Ratio 1 : 1 —

Weight 2,000 max g

mm

Edge type backlight is used.
(I2.6 CCFL×4)

Outward Appearance is shown
at page 32 and 33.

㪛

FG-SG Short circuit —

㪛㪘㪫㪜㩷 㪛㪦㪚㪬㪤㪜㪥㪫㩷㪚㪦㪥㪫㪩㪦㪣㩷㪪㪜㪚㪫㪠㪦㪥㩷

NA19026-C081A

Tech Bes LCD-00225

㪜㪛㪠㪫㩷

㪛㪜㪪㪠㪞㪅㩷

㪛㪘㪫㪜㩷

㪛㪜㪪㪠㪞㪅㩷 㪛㪜㪪㪚㪩㪠㪧㪫㪠㪦㪥

㪚㪟㪜㪚㪢㩷

㪘㪧㪧㪩㪅㩷

㪚㪟㪜㪚㪢㩷

㪘㪧㪧㪩㪅

FUJITSU DISPLAY TECHNOLOGIES

CORPORATION

㪈㩷

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

㪜

㪚㪬㪪㪫㪅

䌓
䌈
䌅

3

/

䌅
䌔

www.panelook.com

6. ABSOLUTE MAXIMUM RATINGS

−

−

7. RECOMMENDED OPERATING CONDITIONS

Global LCD Panel Exchange Center

㪘㩷

㪙㩷

Table 6-1 shows the absolute maximum rating of this LCD module.

Table 6-1. Absolute Maximum Ratings

Item Symbol MIN. TYP. MAX. Unit

Supply Voltage V

Input Voltage V

Table 7-1 shows the recommended operating conditions of this LCD module.

Table 7-1. Recommended Operating Conditions

www.panelook.com

0.3

CC

IN

0.3



ޣNA19026-C081Aޤ

— 6.0 V

— Vcc+0.3 V

Item Symbol MIN. TYP. MAX. Unit

㪚㩷 㪚

Supply Voltage V

Ripple Voltage (Vcc)

CC

V

RP

4.75 5.0 5.25 V

— — 100 mVp-p

㪛㩷

㪛

㪛㪘㪫㪜㩷 㪛㪦㪚㪬㪤㪜㪥㪫㩷㪚㪦㪥㪫㪩㪦㪣㩷㪪㪜㪚㪫㪠㪦㪥㩷

NA19026-C081A

㪜㪛㪠㪫㩷

㪛㪜㪪㪠㪞㪅㩷

㪛㪘㪫㪜㩷

㪛㪜㪪㪠㪞㪅㩷 㪛㪜㪪㪚㪩㪠㪧㪫㪠㪦㪥

㪚㪟㪜㪚㪢㩷

㪘㪧㪧㪩㪅㩷

㪚㪟㪜㪚㪢㩷

㪘㪧㪧㪩㪅

Tech Bes LCD-00225

FUJITSU DISPLAY TECHNOLOGIES

CORPORATION

㪈㩷

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

㪜

㪚㪬㪪㪫㪅

䌓
䌈
䌅

4

/

䌅
䌔

www.panelook.com

8. ELECTRICAL SPECIFICATIONS

Global LCD Panel Exchange Center

㪘㩷

Table 8-1 shows the electrical specifications of this LCD module.

Table 8-1. Electrical Specifications

www.panelook.com



ޣNA19026-C081Aޤ

Item Symbol Condition MIN. TYP. MAX. Unit

Supply Current I

CC

V

+5.0±0.25V

CC=

— 680 900 mA *1

Remark

Vss=0V

“H” Level Logic Input
Voltage

㪙㩷

“L” Level Logic Input
Voltage

CCFL Turn on
Voltage

Lighting Voltage V

V

V

DCLK=32.498MHz

IH

GND

IL

ｆＬ=50kHz,

V

Ta=25ºC

S

ｆＬ=50kHz,

Ta=0ºC

ｆＬ=50kHz

L

=10.5mA

Ｉ

Ｌ

0.7×

Vcc

—

—

V

CC+

0.3

0.3×

Vcc

V *2

V *2

— 1230 1600

Vrms

— — 1600

590 630 670 Vrms *4

BACK LIGHT

Lighting Frequency

㪚㩷 㪚

*3

Tube Current

ｆ

Ｉ

L

L

ＶＬ=630Vrms

ｆＬ=50kHz

=630Vrms

V

Ｌ

40 50 60 kHz

9.5 10.5 11.0

ｍArms

*4

(*1) Typical current value is measured when gray scale (vertical 256 levels) is displayed at

Vcc=5.0V.
Maximum current value is measured when stripes with respect to each RGB dot are
displayed at Vcc=5.0V.
Without rush current.

(*2) Timing control circuit input voltage

㪛㩷

(*3) Backlight specifications are valid when using a suitable inverter such as the “FLCV-15” of

FDTC.

(*4) Tube current (I

) shows the value of the current and voltage that is consumed at one lamp.

L

(4 tubes/unit)

This LCD module has 4 lamps. Each 2 lamps are placed at upper and lower side of the
display.
2 lamps are connected in parallel. Each low voltage terminals (GND side) are bound into 1
line cable.

(See 11-1. Pin configuration for backlight)

㪛

㪜

㪛㪘㪫㪜㩷 㪛㪦㪚㪬㪤㪜㪥㪫㩷㪚㪦㪥㪫㪩㪦㪣㩷㪪㪜㪚㪫㪠㪦㪥㩷

㪜㪛㪠㪫㩷

㪛㪜㪪㪠㪞㪅㩷

㪛㪘㪫㪜㩷

㪛㪜㪪㪠㪞㪅㩷 㪛㪜㪪㪚㪩㪠㪧㪫㪠㪦㪥

㪚㪟㪜㪚㪢㩷

㪘㪧㪧㪩㪅㩷

㪚㪟㪜㪚㪢㩷

㪘㪧㪧㪩㪅

FUJITSU DISPLAY TECHNOLOGIES

NA19026-C081A

Tech Bes LCD-00225

CORPORATION

㪈㩷

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

㪚㪬㪪㪫㪅

䌓
䌈
䌅

5

/

䌅
䌔

www.panelook.com

㵪

Global LCD Panel Exchange Center

Note 1) Measurement Circuit

www.panelook.com



ޣNA19026-C081Aޤ

㪘㩷

+5V

Icc

Based on Fig.8-1.

㪙㩷

Vcc

GND

AC

VS



C

L

V



L

DC/DC

Converter

Back- light



Driver Logic㩷

GND

Ｉ

L



ＬＣＤmodule

Fig.8-1. Measurement Circuit

Note 2) Equivalent Circuit

Based on Fig.8-2 (a), (b).

㪚㩷 㪚

LVDS Receiver

Internal
circuit

㪛㩷

Input signals(LVDS-1ch)

4Z%.-
4Z%.-
4Z
4Z
4Z
4Z
4Z
4Z
4Z

+

4Z

Differential Input

100㱅

Fig.8-2 (a) Equivalent Circuit of Logic Signal Input

Vcc

GND

Fuse
(2.5A)

EMI Filter

22uF

10PF

100pF

Internal
Circuit

FG
（Frame ground）

Fuse:
EMI Filter:

KAB2402 252 NA29010(Matsuo Electric Co., Ltd.)or equivalent.

SGM20C1E332-2A(SUMITOMO Metal)or equivalent.

Fig.8-2 (b) Equivalent Circuit of Power Supply

㪛

㪜

㪛㪘㪫㪜㩷 㪛㪦㪚㪬㪤㪜㪥㪫㩷㪚㪦㪥㪫㪩㪦㪣㩷㪪㪜㪚㪫㪠㪦㪥㩷

㪜㪛㪠㪫㩷

㪛㪜㪪㪠㪞㪅㩷

㪛㪘㪫㪜㩷

㪛㪜㪪㪠㪞㪅㩷 㪛㪜㪪㪚㪩㪠㪧㪫㪠㪦㪥

㪚㪟㪜㪚㪢㩷

㪘㪧㪧㪩㪅㩷

㪚㪟㪜㪚㪢㩷

㪘㪧㪧㪩㪅

FUJITSU DISPLAY TECHNOLOGIES

NA19026-C081A

Tech Bes LCD-00225

CORPORATION

㪈㩷

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

㪚㪬㪪㪫㪅

䌓
䌈
䌅

6

/

䌅
䌔

www.panelook.com

9. OPTICAL SPECIFICATIONS

Global LCD Panel Exchange Center

㪘㩷

Table 9-1 shows the optical specifications of this LCD module.

Table 9-1. Optical Specifications

www.panelook.com



ޣNA19026-C081Aޤ

Ta=25ºC

Item Symbol Condition

MIN. TYP. MAX

Visual
Angle

Horizontal

Vertical

Contrast Ratio CR

Response

㪙㩷

Time(ON)
(B→W)

Response
Time(OFF)
(W→B)

T

T

L,R

U,D

t

t

on

off

CRt10

T

L,R,U,D

T

L,R,

=0º

U,D

T

L,R,

=0º

U,D

T

=0º

U,D

T

=0º

L,R

=0º

Ta=25ºC — 15 30 ms

Ta=0ºC — 50 100 ms

Ta=25ºC — 10 25 ms

Ta=0ºC — 50 100 ms

85 — — deg

85 — — deg

350 600 — —

Brightness I 350 450 — cd/m

T

Brightness
Uniformity

Chromaticity W

㪚㩷 㪚

'I

V
I
(at maximum

X 0.283 0.313 0.343 —

brightness)

Y

=0º

L,R,U,D

=5V,

CC

=10.5mA

L

75 — — %

0.299 0.329 0.359 —

R Red 0.65, 0.34 Typ.

G Green 0.30, 0.59 Typ.

B

(x, y)

Blue 0.15, 0.14 Typ.

Unit

Note

White/
Black

2

White

*1

(1)(2)
(3)(5)
(6)

(1)(2)
(3)(5)

(1)
(4)
(5)

(1)(5)

(1)(5)
(7)

(1)
(5)

Specifications Remark

γ-curve γ

2.4 Typ.

LCD Panel Type TFT Color

Display Mode Normally Black VA

㪛㩷

Wide Viewing Angle Technology MVA-Premium

Optimum Viewing Angle

Display Color

− (symmetry)

16 million (each 6-bit+2-bit FRC)

Color of non-display area Black

Surface Treatment

Anti-glare (Haze value:25%, 3H(at weight of 300g))

(*1) Specified value is measured in 20~30 minutes after lighting on (LCD module single).
A required value may not be achieved on condition that LCD module is built in the cabinet because of
its radiation.
All items without “Brightness Uniformity” are measured at the center of display board.

(Note1) •CS-1000 (MINOLTA Co., Ltd.) , BM-5A(Topcon) or equivalent luminance colorimeter should be

used for the measurement.

Field=2º, L=500mm

•The specified value of viewing angle, contrast, brightness, brightness uniformity and
chromaticity are under the dark room condition (1lux or less).

㪛㪘㪫㪜㩷 㪛㪦㪚㪬㪤㪜㪥㪫㩷㪚㪦㪥㪫㪩㪦㪣㩷㪪㪜㪚㪫㪠㪦㪥㩷

㪜㪛㪠㪫㩷

㪛㪜㪪㪠㪞㪅㩷

㪛㪘㪫㪜㩷

㪛㪜㪪㪠㪞㪅㩷 㪛㪜㪪㪚㪩㪠㪧㪫㪠㪦㪥

㪚㪟㪜㪚㪢㩷

㪘㪧㪧㪩㪅㩷

㪚㪟㪜㪚㪢㩷

㪘㪧㪧㪩㪅

FUJITSU DISPLAY TECHNOLOGIES

NA19026-C081A

Tech Bes LCD-00225

CORPORATION

㪈㩷

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

(6)

㪛

㪜

㪚㪬㪪㪫㪅

䌓
䌈
䌅

7

/

䌅
䌔

www.panelook.com