Fujifilm FINEPIX F20 User Manual

F20

SETNONO

START MENU

/ LANG.

SETNONO

DATE

TIME NOT SET

YY.MM.DD

1. 1 12:00 AM

Camera Controls

POWER button

Shutter button

Mode switch

Lens (lens cover)

A/V OUT (Audio/ Visual output) socket

USB socket

DC IN 5V socket

BL00556-200(1) E

AF-assist illuminator

Self-timer lamp

Terminal cover

Picture Taking

A. Loading the Battery

Battery release catch

O PEN

Indicators

Hold the battery so that the indicators are aligned. Push the battery release catch aside while loading the battery. Check that the battery is firmly held in place.

B. Charging the Battery

Plug the AC power adapter

connector into the DC IN 5V socket on the camera.

Flash

Microphone

Indicator lamp

w (Playback) button

4-direction (nopq) button

LCD monitor

Speaker

Tripod mount

xD-Picture Card slot

Battery compartment

Battery release catch

W (Wide zoom) button

T (Tele zoom) button

Photo mode (p) button

Strap mount

MENU/OK button

Picture stabilization

(Anti-blur) button

DISP (Display)/BACK button

Battery cover

Refer to Owner’s Manual for more detailed instructions

DATE

YY.MM.DD

SET

/ TIME NOT SET

1. 1 12:00

Yo u can select your preferred date format.

Press p or q to select Year, Month, Day, Hour, or Minute. Press n or o to correct the setting.

✽ Refer to the Owner’s Manual for

“Turning On and Off”.

D. Taking Pictures

Double

beep

Press POWER button down fully to turn the camera on.

Set the Mode switch to q.

Press the shutter button down halfway to adjust the focus.

Plug the connecting cable

into the AC power adapter.

Plug the connecting cable into the power outlet.

When connecting is completed, battery charging begins.

Charging ends when the indicator lamp turns off (about 2.5 hours).

Halfway pressed

Click

Fully pressed

Press the shutter button down fully to take a picture. The camera makes a “Click” sound and takes the picture.

C. Setting up the Camera

START MENU

/ LANG.

SET

FPT/Y-608106-PY

Press POWER button down fully to turn the camera on.

screen appears on the LCD

monitor.

Press n, o, p, or q to select the language.

Press MENU/OK to confirm the setting.

E. Viewing the Images

FinePix F20 has internal memory that can store images without xD-Picture Card. Use an xD-Picture Card (sold separately) when recording a large number of images.

Still images that can be viewed on FinePix F20

Yo u can use this camera to view still images recorded on FinePix F20 or still images (excluding some uncompressed images) recorded on a FUJIFILM digital camera that supports xD-Picture Card.

Press w.

Press p or q to move through your images.

Viewing Images on your PC

A.Installing Software

B.Connecting the Camera to your PC

C.Saving the Images

A. Installing Software

Do not connect the camera to your PC until the software installation is completed.

1. Turn on your PC and start up Windows.

Users of Windows 2000 Professional or Windows XP

●

should log in by using a system administrator account (e.g. “Administrator”).

2. Quit all other active applications until no applications are shown in the taskbar.

3. Load the enclosed CD-ROM into the CD-ROM drive. The installer starts up automatically.

4. The Setup screen appears. Click the [Installing FinePixViewer] button.

Windows XP

The “Found New Hardware” help message appears in the

bottom-right corner of your screen. This message will close when the settings are completed. No action is required.

FinePixViewer starts up automatically.

5. After installation completed, press [Close] button.

B. Connecting the Camera to your PC

1. Insert the xD-Picture Card with images into the camera.

2. Connect the camera to your PC using the USB cable (included).

; USB socket

AC-5VC

3. Press w for about 1 second to turn the camera on in Playback mode.

Windows 98/98 SE/Me/2000 Professional

FinePixViewer starts up automatically.

C. Saving the Images

1. The Save Image Wizard starts up. Click the [Start] button.

2. Check that the files are downloaded from the camera to your PC and that a folder with the date is created.

Ex. \My Documents \ My Pictures \ 2006_0724

D. Viewing the Images

1. Click the [Show List of Images] button.

Select “Preview” in the View menu to display an enlarged image.

For more information

Refer to “How to use FinePixViewer” in the HELP menu, or “Software Installation” in the Owner’s Manual, or visit Fujifilm “Q&A Search” in the following website. ( http://www.fujifilm.com/products/digital/ ) For Macintosh users, refer to “Software Installation” in the Owner’s Manual.