Fujifilm FinePix F1000EXR Owner Manual

BL01893-200

DIGITAL CAMERA

FINEPIX F1000EXR

Owner’s Manual

For information on related products, visit our website at

http://www.fujifilm.com/products/digital_cameras/index.html

Before You Begin

First Steps

Basic Photography and Playback

More on Playback

Wireless Networks

Movies

Connections

Menus

Technical Notes

Troubleshooting

Appendix

For Your Safety

Installation

For Your Safety

IMPORTANT SAFETY INSTRUCTIONS

• Read Instructions: All the safety and operating instructions should be read before the appliance is operated.

• Retain Instructions: The safety and operating instructions should be retained for future reference.

• Heed Warnings: All warnings on the appliance and in the operating instructions should be adhered to.

• Follow Instructions: All operating and use instructions should be followed.

Installation

Power Sources: This video product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For video products intended to operate from battery power, or other sources, refer to the operating instructions.

Grounding or Polarization: This video product is equipped with a polarized alternatingcurrent line plug (a plug having one blade wider than the other). This plug will ﬁ t into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to ﬁ t, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

Alternate Warnings: This video product is equipped with a three-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only ﬁ t into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding type plug.

Overloading: Do not overload wall outlets and extension cords as this can result in a risk of ﬁ re or electric shock.

Ventilation: Slots and openings in the cabinet are provided for ventilation, to ensure reliable operation of the video product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the video product on a bed, sofa, rug, or other similar surface.

This video product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to. This video product should never be placed near or over a radiator or heat register.

Attachments: Do not use attachments not recommended by the video product manufacturer as they may cause hazards.

Water and Moisture: Do not use this video product near water—for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

Power-Cord Protection: Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

Accessories: Do not place this video product on an unstable cart, stand, tripod, bracket, or table. The video product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the video product. Any mounting of the appliance should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.

An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

Antennas

Use

Service

Antennas

Outdoor Antenna Grounding: If an outside antenna or cable system is connected to the video product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and builtup static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

Ground Clamp

Electric Service

Equipment

Ground Clamps

Power Service Grounding Electrode System (NEC ART

250. PART H)

Power Lines: An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

Antenna Lead in Wire

Antenna Discharge Unit (NEC SECTION 810-20)

Grounding Conductors (NEC SECTION 810-21)

Use

Cleaning: Unplug this video product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Object and Liquid Entry: Never push objects of any kind into this video product through openings as they may touch dangerous voltage points or short out parts that could result in a ﬁ re or electric shock. Never spill liquid of any kind on the video product.

Lightning: For added protection for this video product receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the video product due to lightning and powerline surges.

Service

Servicing: Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualiﬁ ed service personnel.

Damage Requiring Service: Unplug this video product from the wall outlet and refer servicing to qualiﬁ ed service personnel under the following conditions:

• When the power-supply cord or plug is damaged.

• If liquid has been spilled, or objects have fallen into the video product.

• If the video product has been exposed to rain or water.

• If the video product has been dropped or the cabinet has been damaged.

If the video product does not operate nor-

For Your Safety

mally follow the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualiﬁ ed technician to restore the video product to its normal operation.

When the video product exhibits a distinct change in performance—this indicates a need for service.

Replacement Parts: When replacement parts are required, be sure the service technician has used replacement parts speciﬁ ed by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in ﬁ re, electric shock or other hazards.

Safety Check: Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine that the video product is in proper operating condition.

iii

For Your Safety

WARNING

Be sure to read these notes before use

Safety Notes

• Make sure that you use your camera correctly. Read these safety

notes and your Owner’s Manual carefully before use.

• After reading these safety notes, store them in a safe place.

The icons shown below are used in this document to indicate the severity of the injury or damage that can result if the information indicated by the icon is ignored and the product is used incorrectly as a result.

This icon indicates that death or serious injury can result if the information is ignored.

WARNING

This icon indicates that personal injury or material damage can result if the information is ignored.

CAUTION

The icons shown below are used to indicate the nature of the instructions which are to be observed.

Triangular icons tell you that this information requires attention (“Important”).

Circular icons with a diagonal bar tell you that the action indicated is prohibited (“Prohibited”).

Filled circles with an exclamation mark indicate an action that must be performed (“Required”).

If a problem arises, turn the camera o , remove the battery, and disconnect and unplug the AC power adapter. Continued use of

the camera when it is emitting smoke, is emitting any unusual

Unplug from

odor, or is in any other abnormal state can cause a ﬁ re or elec-

power socket

tric shock. Contact your FUJIFILM dealer. Do not allow water or foreign objects to enter the camera. If water

or foreign objects get inside the camera, turn the camera oﬀ , remove the battery, and disconnect and unplug the AC power

Avoid exposure

adapter. Continued use of the camera can cause a ﬁ re or elec-

to water

tric shock. Contact your FUJIFILM dealer.

About the Icons

WARNING

Do not use the camera in the bathroom or shower. This can cause

Do not use in

a ﬁ re or electric shock.

the bathroom or

shower

Never attempt to change or take apart the camera (never open the case). Failure to observe this precaution can cause ﬁ re or

Do not

electric shock.

disassemble

Should the case break open as the result of a fall or other accident, do not touch the exposed parts. Failure to observe this precau-

tion could result in electric shock or in injury from touching the damaged parts. Remove the battery immediately, taking care

Do not touch

to avoid injury or electric shock, and take the product to the

internal parts

point of purchase for consultation.

Do not change, heat or unduly twist or pull the connection cord and do not place heavy objects on the connection cord. These actions

could damage the cord and cause a ﬁ re or electric shock . If the cord is damaged, contact your FUJIFILM dealer.

Do not place the camera on an unstable surface. This can cause the camera to fall or tip over and cause injury.

Never attempt to take pictures while in motion. Do not use the camera while you are walking or driving a vehicle. This can result in you falling down or being involved in a traﬃ c accident.

Do not touch any metal parts of the camera during a thunderstorm. This can cause an electric shock due to induced current from the lightning discharge.

Do not use the battery except as speci ed. Load the battery as shown by the indicator.

Do not heat, change or take apart the battery. Do not drop or subject the battery to impacts. Do not store the battery with metallic products. Any of these actions can cause the battery to burst or leak

and cause ﬁ re or injury as a result.

Use only the battery or AC power adapters speci ed for use with this camera. Do not use voltages other than the power supply voltage shown. The use of other power sources can cause a ﬁ re.

If the battery leaks and  uid gets in contact with your eyes, skin or clothing,  ush the a ected area with clean water and seek medical attention or call an emergency number right away.

WARNING

CAUTION

Do not use the charger to charge batteries other than those speci ed here. The supplied battery charger is for use only with the type of

battery supplied with the camera. Using the charger to charge conventional batteries or other types of rechargeable batteries can cause the battery to leak ﬂ uid, overheat or burst.

Danger of explosion if battery is incorrectly replaced. Replace only with batteries of the same type.

Do not use in the presence of  ammable objects, explosive gases, or dust.

When carrying the battery, install it in a digital camera or keep it in the hard case. When storing the battery, keep it in the hard case. When discarding, cover the battery terminals with insulation tape.

Contact with other metallic objects or batteries could cause the battery to ignite or burst.

Keep memory cards out of the reach of small children. Because memory cards are small, they can be swallowed by children. Be sure to store memory cards out of the reach of small children. If a child swallows a memory card, seek medical attention or call an emergency number.

Turn the camera o in crowds. The camera emits radio-frequency radiation that may interfere with pacemakers.

Turn the camera o in the vicinity of automatic doors, public address systems, and other automatically controlled devices. The camera

emits radio-frequency radiation that may cause these devices to malfunction.

Keep the camera at least 22cm away from people wearing pacemakers. The camera emits radio-frequency radiation that may

interfere with pacemakers.

Do not use this camera in locations a ected by oil fumes, steam, humidity or dust. This can cause a ﬁ re or electric shock.

Do not leave this camera in places subject to extremely high temperatures. Do not leave the camera in locations such as a sealed

vehicle or in direct sunlight. This can cause a ﬁ re.

Keep out of the reach of small children. This product could cause injury in the hands of a child.

WARNING

CAUTION

For Your Safety

Do not place heavy objects on the camera. This can cause the heavy object to tip over or fall and cause injury.

Do not move the camera while the AC power adapter is still connected. Do not pull on the connection cord to disconnect the AC power adapter. This can damage the power cord or cables and cause

a ﬁ re or electric shock.

Do not use the AC power adapter when the plug is damaged or the plug socket connection is loose. This could cause a ﬁ re or electric

shock.

Do not cover or wrap the camera or the AC power adapter in a cloth or blanket. This can cause heat to build up and distort the cas-

ing or cause a ﬁ re.

When you are cleaning the camera or you do not plan to use the camera for an extended period, remove the battery and disconnect and unplug the AC power adapter. Failure to do so can cause a

ﬁ re or electric shock.

When charging ends, unplug the charger from the power socket. Leaving the charger plugged into the power socket can cause

Unplug from

a ﬁ re.

power socket

Using a  ash too close to a person’s eyes may temporarily a ect the eyesight. Take particular care when photographing infants and

young children.

When a memory card is removed, the card could come out of the slot too quickly. Use your  nger to hold it and gently release the card.

Injury could result to those struck by the ejected card. Request regular internal testing and cleaning for your camera.

Build-up of dust in your camera can cause a ﬁ re or electric shock. Contact your FUJIFILM dealer to request internal cleaning every two years. Please note that this service is not free of charge.

Remove your  ngers from the  ash window before the  ash  res. Failure to observe this precaution could result in burns.

Keep the  ash window clean and do not use the  ash if the window is obstructed. Failure to observe these precautions could cause

smoke or discoloration.

CAUTION

For Your Safety

Li-ion Batteries

AA Alkaline/Rechargeable Ni-MH Batteries/ AA lithium batteries

The Battery and Power Supply

Note: Check the type of battery used in

your camera and read the appropriate sections.

The following describes the proper use of batteries and how to prolong their life. Incorrect use can shorten battery life or cause leakage, overheating, ﬁ re, or explosion.

Li-ion Batteries

Read this section if your camera uses a rechargeable Li-ion battery.

The battery is not charged at shipment. Charge the battery before use. Keep the battery in its case when not in use.

■ Notes on the Battery

The battery gradually loses its charge when not in use. Charge the battery one or two days before use.

Battery life can be extended by turning the camera oﬀ when not in use.

Battery capacity decreases at low temperatures; a depleted battery may not function at when cold. Keep a fully charged spare battery in a warm place and exchange as necessary, or keep the battery in your pocket or other warm place and insert it in the camera only when shooting. Do not place the battery in direct contact with hand warmers or other heating devices.

■ Charging the Battery

Charge the battery in the supplied battery charger. Charging times will increase at ambient temperatures below +10 °C (+50 °F) or above +35 °C (+95 °F). Do not attempt to charge the battery at temperatures above 40 °C (+104 °F); at temperatures below 0 °C (+32 °F), the battery will not charge.

Do not attempt to recharge a fully charged battery. The battery does not however need to be fully discharged before charging.

The battery may be warm to the touch immediately after charging or use. This is normal.

■ Battery Life

At normal temperatures, the battery can be recharged about 300 times. A noticeable decrease in the length of time the battery will hold a charge indicates that it has reached the end of its service life and should be replaced.

■ Storage

Performance may be impaired if the battery is left unused for extended periods when fully charged. Run the battery ﬂ at before storing it.

If the camera will not be used for an extended period, remove the battery and store it in a dry place with an ambient temperature of from +15 °C to +25 °C (+59 °F to +77 °F). Do not store in locations exposed to extremes of temperature.

■ Cautions: Handling the Battery

• Do not transport or store with metal objects such as necklaces or hairpins.

• Do not expose to ﬂ ame or heat.

• Do not disassemble or modify.

• Use with designated chargers only.

• Do not drop or subject to strong physical shocks.

• Do not expose to water.

• Keep the terminals clean.

• The battery and camera body may become warm to the touch after extended use. This is normal.

AA Alkaline/Rechargeable Ni-MH Batteries/ AA lithium batteries

Read this section if your camera uses AA alkaline or rechargeable AA Ni-MH batteries. Information on compatible battery

types may be found elsewhere in the camera manual.

■ Cautions: Handling the Batteries

• Do not expose to water, ﬂ ame, or heat, or store in warm or humid conditions.

• Do not transport or store with metal objects such as necklaces or hairpins.

• Do not disassemble or modify the batteries or battery casing.

• Do not subject to strong physical shocks.

• Do not use batteries that are leaking, deformed, or discolored.

• Keep out of reach of infants and small children.

• Insert in the correct orientation.

• Do not mix old and new batteries, batteries

AC Power Adapters (Available Separately)

with diﬀ erent charge levels, or batteries of diﬀ erent types.

• If the camera will not be used for an extended period, remove the batteries. Note that the camera clock will be reset.

• The batteries may be warm to the touch immediately after use. Turn the camera oﬀ and allow the batteries to cool before handling.

• Battery capacity tends to decrease at low temperatures. Keep spare batteries in a pocket or other warm place and exchange as necessary. Cold batteries may recover some of their charge when warmed.

• Fingerprints and other stains on the battery terminals can impair battery performance. Thoroughly clean the terminals with a soft, dry cloth before inserting them in the camera.

If the batteries leak, clean the battery compartment thoroughly before inserting new batteries.

If ﬂ uid from the battery comes into contact with skin or clothing, ﬂ ush the aﬀ ected area with water. If  uid

enters your eyes, immediately  ush the a ected area with water and seek medical attention. Do not rub your eyes. Failure to observe this precaution could result in permanent visual impairment.

■ Ni-MH Batteries

The capacity of Ni-MH batteries may be temporarily reduced when new, after long periods of disuse, or if they are repeatedly recharged before being fully discharged. This is normal and does not indicate a malfunction. Capacity can be increased by repeatedly discharging the batteries using the discharge option in the camera setup menu and recharging them using a battery charger.

Q C AUTION: Do not use the discharge option

with alkaline batteries.

The camera draws a small amount of current even when oﬀ . Ni-MH batteries that have been left in the camera for an extended period may be drawn down to the point that they no longer hold a charge. Battery performance may also drop if the batteries are run down in a device such as a ﬂ ashlight. Use the discharge option in the camera setup menu to discharge Ni-MH batteries. Batteries that no longer hold a charge even after repeatedly being discharged and recharged have reached the end of their service life and must be replaced.

Ni-MH batteries can be recharged in a battery charger (sold separately). Batteries may become warm to the touch after charging. Refer to the instructions provided with the charger for more information. Use the charger with compatible batteries only.

Ni-MH batteries gradually lose their charge when not in use.

■ Disposal

Dispose of used batteries in accord with local regulations.

For Your Safety

AC Power Adapters (Available Separately)

This section applies to all camera models. Use only FUJIFILM AC power adapters designated for use with this camera. Other adapters could damage the camera.

• The AC power adapter is for indoor use only.

• Be sure the DC plug is securely connected to the camera.

• Turn the camera oﬀ before disconnecting the adapter. Disconnect the adapter by the plug, not the cable.

• Do not use with other devices.

• Do not disassemble.

• Do not expose to high heat and humidity.

• Do not subject to strong physical shocks.

• The adapter may hum or become hot to the touch during use. This is normal.

• If the adapter causes radio interference, reorient or relocate the receiving antenna.

vii

For Your Safety

Take Test Shots

Notes on Copyright

Handling

Liquid Crystal

Trademark Information

Electrical Interference

Exif Print (Exif Version 2.3)

Take Test Shots

Notes on Copyright

Handling

Using the Camera

Do not aim the camera at extremely bright light sources, such as the sun in a cloudless sky. Failure to observe this precaution could damage the camera image sensor.

Before taking photographs on important occasions (such as at weddings or before taking the camera on a trip), take a test shot and view the result in the LCD monitor to ensure that the camera is functioning normally. FUJIFILM Corporation can not accept liability for damages or lost proﬁ ts incurred as a result of product malfunction.

Unless intended solely for personal use, images recorded using your digital camera system cannot be used in ways that infringe copyright laws without the consent of the owner. Note that some restrictions apply to the photographing of stage performances, entertainments, and exhibits, even when intended purely for personal use. Users are also asked to note that the transfer of memory cards containing images or data protected under copyright laws is only permissible within the restrictions imposed by those copyright laws.

To ensure that images are recorded correctly, do not subject the camera to impact or physical shocks while images are being recorded.

viii

Liquid Crystal

In the event that the LCD monitor is damaged, care should be taken to avoid contact with liquid crystal. Take the urgent action indicated should any of the following situations arise:

• If liquid crystal comes in contact with your skin, clean the area with a cloth and then wash thoroughly with soap and running water.

• If liquid crystal enters your eyes, ﬂ ush the affected eye with clean water for at least 15 minutes and then seek medical assistance.

• If liquid crystal is swallowed, rinse your mouth thoroughly with water. Drink large quantities of water and induce vomiting, then seek medical assistance.

Although the display is manufactured using extremely high-precision technology, it may contain pixels that are always lit or that do not light. This is not a malfunction, and images recorded with the product are unaﬀ ected.

Trademark Information

xD-Picture Card and E are trademarks of FUJIFILM Corporation. The typefaces included herein are solely developed by DynaComware Taiwan Inc. Macintosh, QuickTime, and Mac OS are trademarks of Apple Inc. in the U.S.A. and other countries. Windows 8, Windows7, Windows Vista, and the Windows logo are trademarks of the Microsoft group of companies. Wi-Fi® and Wi-Fi Protected Setup® are registered trademarks of the Wi-Fi Alliance. Adobe and Adobe Reader are either trademarks or registered trademarks of Adobe Systems Incorporated in the U.S.A. and/or other countries. The SDHC and SDXC logos are trademarks of SD-3C, LLC. The HDMI logo is a trademark. YouTube is a trademark of Google Inc. All other trade names mentioned

in this manual are the trademarks or registered trademarks of their respective owners.

Electrical Interference

This camera may interfere with hospital or aviation equipment. Consult with hospital or airline staﬀ before using the camera in a hospital or on an aircraft.

Exif Print (Exif Version 2.3)

Exif Print is a newly revised digital camera ﬁ le format in which information stored with photographs is used for optimal color reproduction during printing.

IMPORTANT NOTICE:

Read Before Using the Software

Direct or indirect export, in whole or in part, of licensed software without the permission of the applicable governing bodies is prohibited.

IMPORTANT: Read the following notices before using the camera’s built-in wireless transmitter.

Q This product, which contains encr yption function developed in

the United States, is controlled by the United States Export Administration Regulations and may not be exported or re-exported to any country to which the United States embargoes goods.

• Use only as part of a wireless network. FUJIFILM does not accept liability for damages resulting from unauthorized use. Do not use in applications requiring a high degree of reliability, for example in medical devices or other systems that may directly or indirectly impact human life. When using the device in computer and other systems that demand a greater degree of reliability than wireless networks, be sure to take all necessary precautions to ensure safety and prevent malfunction.

• Use only in the country in which the device was purchased. This device conforms to regulations governing wireless network devices in the country in which it was purchased. Observe all location regulations when using the device. FUJIFILM does not accept liability for problems arising from use in other jurisdictions.

• Wireless data (images) may be intercepted by third parties. The security of data transmitted over wireless networks is not guaranteed.

• Do not use the device in locations subject to magnetic  elds, static electric- ity, or radio interference. Do not use the transmitter in the vicinity of microwave ovens or in other locations subject to magnetic ﬁ elds, static electricity, or radio interference that may prevent reception of wireless signals. Mutual interference may occur when the transmitter is used in the vicinity of other wireless devices operating in the

2.4GHz band.

• The wireless transmitter operates in the 2.4GHz band using DSSS and

OFDM modulation.

For Your Safety

• This device operates on the same frequency as commercial, educational, and medical devices and wireless transmitters. It also operates on the

same frequency as licensed transmitters and special unlicensed lowvoltage transmitters used in RFID tracking systems for assembly lines and in other similar applications.

• To prevent interference with the above devices, observe the following precautions. Conﬁ rm that the RFID transmitter is not in operation before using this device. Should you observe that the device causes interference in licensed transmitters used for RFID tracking, immediately choose a new operating frequency for this device to prevent additional interference. If you notice that this device causes interference in low-voltage RFID tracing systems, contact a FUJIFILM representative.

2.4DS/OF4

Wireless Network Devices: Cautions

This sticker indicates that this device operates in the 2.4GHz band using DSSS and OFDM modulation and may cause interference at distances of up to 40m.

About This Manual

Table of Contents

............................

xii

Troubleshooting

..........................

108

Warning Messages and Displays

...

115

Memory Cards

Temperature Warning

About This Manual

Before using the camera, read this manual and the warnings in “For Your Safety” (P ii). For information on speci c topics, consult the sources below.

Table of Contents

The “Table of Contents” gives an overview of the entire manual. The princi-

............................PP

xii

Troubleshooting

..........................PP

Having a speci c problem with the camera? Find the answer here.

108

pal camera operations are listed here.

Warning Messages and Displays

...PP

115

Find out what’s behind that  ashing icon or error message in the display.

Memory Cards

Pictures can be stored in the camera’s internal memory or on optional SD, SDHC, and SDXC memory cards (P 13), referred to in this manual as “memory cards.”

Temperature Warning

The camera will turn o automatically before its temperature or the temperature of the battery rise above safe limits. Pictures taken when a temperature warning is displayed may exhibit higher levels of “noise” (mottling). Turn the camera o and wait for it to cool before turning it on again.

■■ Deleting Pictures Deleting Pictures

y To delete a picture,

display it full frame and press the selector up (b).

Frequently-Used Buttons

■■ Taking Pictures During PlaybackTaking Pictures During Playback

y To return instantly to shooting mode,

press the shutter button halfway.



View

Shoot

■■ Turning the Camera on in Playback ModeTurning the Camera on in Playback Mode

y When the camera is

o , playback can be started by pressing the

a button for about a

second.

Frequently-Used Buttons

Table of Contents

Before You Begin

First Steps

Basic Photography and Playback

More on Playback

Playback Options .............................................................50

Continuous Shooting ......................................................51

I Favorites: Rating Pictures .........................................51

Playback Zoom ...............................................................52

Multi-Frame Playback ....................................................53

A Deleting Pictures ......................................................54

b Image Search............................................................55

m PhotoBook Assist .....................................................56

Creating a PhotoBook.....................................................56

Viewing Photobooks ......................................................57

Editing and Deleting Photobooks ...................................57

Viewing Panoramas ........................................................58

Wireless Networks

Wireless Transfer .............................................................59

Wireless Connections: Smartphones ..............................59

Wireless Connections: Computers...................................60

Movies

Recording Movies ............................................................61

Viewing Movies ...............................................................63

Connections

Viewing Pictures on High-De nition TVs.......................64

Printing Pictures via USB ................................................65

Printing the DPOF Print Order.........................................67

Viewing Pictures on a Computer ....................................69

Windows: Installing MyFinePix Studio ...........................70

Connecting the Camera ..................................................73

Table of Contents

Menus

Using the Menus: Shooting Mode ..................................76

Using the Shooting Menu...............................................76

Shooting Menu Options .................................................77

A E MODE ....................................................77

A Adv. MODE ............................................................77

A SCENE POSITION .....................................................77

N ISO........................................................................77

O IMAGE SIZE ............................................................78

T IMAGE QUALITY .....................................................79

U DYNAMIC RANGE ...................................................79

P FILM SIMULATION ..................................................80

D WHITE BALANCE ....................................................81

R CONTINUOUS .........................................................82

Z ADVANCED ANTI BLUR ............................................82

b FACE DETECTION ....................................................82

C PHOTOMETRY ........................................................82

F FOCUS MODE .........................................................83

F Fn BUTTON ............................................................83

f E-Fn BUTTON CUSTOM SETTING ...............................83

W MOVIE SET-UP .......................................................84

Using the Menus: Playback Mode ..................................86

Using the Playback Menu ...............................................86

Playback Menu Options ..................................................87

r WIRELESS COMMUNICATION ...................................87

s PC AUTO SAVE ........................................................87

m PHOTOBOOK ASSIST ................................................87

b IMAGE SEARCH ......................................................87

A ERASE ...................................................................87

j MARK FOR UPLOAD TO ............................................88

I SLIDE SHOW ..........................................................89

B RED EYE REMOVAL .................................................89

xiii

Table of Contents

Technical Notes

Troubleshooting

Appendix

D PROTECT ................................................................90

G CROP.....................................................................90

O RESIZE ...................................................................91

C IMAGE ROTATE .......................................................91

E COPY .....................................................................92

K PRINT ORDER (DPOF) ..............................................93

J DISP ASPECT ..........................................................93

The Setup Menu ..............................................................94

Using the Setup Menu ....................................................94

Setup Menu Options ......................................................95

F DATE/TIME ............................................................95

N TIME DIFFERENCE ...................................................95

Q a ......................................................95

R RESET ....................................................................95

o SILENT MODE .........................................................96

U GEOTAGGING SET-UP ..............................................96

b SOUND SET-UP ......................................................96

A SCREEN SET-UP ......................................................97

Z POWER MANAGEMENT ...........................................98

L IS MODE ................................................................99

B RED EYE REMOVAL .................................................99

R INTELLIGENT DIGITAL ZOOM ..................................100

C AF ILLUMINATOR ..................................................100

t SAVE DATA SET-UP ...............................................101

r WIRELESS SETTINGS .............................................103

s PC AUTO SAVE SET TING .........................................103

K FORMAT ..............................................................103

Technical Notes

Optional Accessories .....................................................104

Accessories from FUJIFILM............................................105

Caring for the Camera ...................................................106

Storage and Use ...........................................................106

Cleaning .......................................................................107

Traveling ......................................................................107

Troubleshooting

Problems and Solutions ................................................108

Warning Messages and Displays ..................................115

Appendix

Memory Card Capacity ..................................................119

Speci cations ................................................................120

xiv

Before You Begin

Symbols and Conventions

Supplied Accessories

Attaching the Strap

Before You Begin

Symbols and Conventions

The following symbols are used in this manual: Q : This information should be read before use to ensure correct operation. R : Additional information that may be helpful when using the camera. P : Other pages in this manual on which related information may be found.

Menus and other text in the displays are shown in bold. In the illustrations in this manual, displays may be simpli ed for explanatory purposes.

Supplied Accessories

The following items are included with the camera:

NP-50 Rechargeable

battery

• Strap

BC-50B battery

charger

Plug adapter USB cable

Attaching the Strap

Attach the strap as shown.

Parts of the Camera

Move cursor up

d (exposure compensation) button (P 37)

b (delete) button (P xi)

Move cursor left

F (macro) button (P 38)

Move cursor right

N ( ash) button (P 39)

MENU/OK button

Command dial

Move cursor down

h (self-timer) button (P 41)

Parts of the Camera

For more information, refer to the page listed to the right of each item.

Selector button

* The illustrations in this manual have been simpli ed for explanatory purposes.

2 Before You Begin

Parts of the Camera

A B C D E F G H

I J K L M N

O P Q R

S T U V W X Y Z a

The Indicator Lamp

Indicator lamp

Camera status

Glows green

Blinks green

Blinks green and orange

Glows orange

Blinks orange

Blinks red

Fn (function) button ....................................................42

Shutter button .............................................................20

ON/OFF button ............................................................ 15

Flash ............................................................................ 39

Flash pop-up button .................................................... 39

Microphone .................................................................. 61

Lens and lens cover

AF-assist illuminator ..................................................100

Self-timer lamp ............................................................ 41

Zoom control .......................................................... 19, 52

LCD monitor ...................................................................4

a (playback) button ............................................ 22, 50

Indicator lamp (see below)

Mode dial ..................................................................... 23

Strap eyelet .................................................................... 1

F (movie recording) button ......................................61

Terminal cover ...................................................64, 65, 73

DC coupler cable cover ............................................... 105

E-Fn (extended function) button ................................. 43

Monitor sunlight mode

DISP (display)/BACK button .................................... 6, 17

Battery-chamber cover ................................................ 10

Tripod mount

Speaker ........................................................................ 63

USB multi-connector .............................................. 65, 73

Connector for HDMI cable............................................. 64

Battery chamber ..........................................................10

Memory card slot .........................................................11

Battery latch .......................................................... 10, 12

................................................. 7

* Press and hold the E-Fn button for monitor sunlight mode.

The Indicator Lamp

The indicator lamp shows camera status as follows:

Indicator lamp

Glows green Focus locked.

Blinks green Blur, focus, or exposure warning. Picture can be taken.

Blinks green and orange Recording pictures. Additional pictures can be taken.

Glows orange Recording pictures. No additional pictures can be taken at this time.

Blinks orange Flash charging;  ash will not  re when picture is taken.

Blinks red Lens or memory error.

Camera status

3Before You Begin

Parts of the Camera

Camera Displays

10:00

250

3.5

12 / 31/ 2050

A B C D E F G H I J

K L M N O P Q R S T U V W X Y Z a b c

Camera Displays

The following types of indicator may be displayed during shooting and playback. Indicators vary with camera settings.

■ Shooting

Sensitivity .................................................................... 77

Image size/quality ................................................. 78, 79

10:00

3.5

12 / 31/ 2050

250

Shooting mode ............................................................ 23

Intelligent Face Detection indicator..............................49

Metering ...................................................................... 82

Continuous shooting mode ..........................................45

Silent mode indicator ................................................... 96

Temperature warning..............................................x, 116

Internal memory indicator

Monitor sunlight mode ..................................................7

Movie mode .................................................................84

Number of available frames .......................................119

800

* a: indicates that no memory card is inser ted and that pictures will be stored in the camera’s internal memory (P 11).

Dynamic range ............................................................. 79

Film simulation ............................................................80

White balance .............................................................. 81

Battery level ................................................................... 7

IS Mode ........................................................................ 99

Location data download statu ...................................... 96

Blur warning ........................................................40, 115

Focus warning ...................................................... 20, 115

Exposure compensation ...............................................37

Aperture....................................................................... 34

Shutter speed ......................................................... 33, 34

Date and time ..............................................................17

Focus frame .................................................................. 35

Date stamp................................................................. 102

Self-timer indicator ...................................................... 41

a b

Macro (close-up) mode ................................................38

Flash mode .................................................................. 39

4 Before You Begin

■ Playback

100-0001

400

12 / 31/ 2050

10:00 AM

1 / 250

3.5

4:3

A B C D E F G H I J K L M N O P Q

12 / 31/ 2050 1 / 250

YouTube

3.5

10:00 AM

100-0001

400

4:3

Parts of the Camera

Playback mode indicator ........................................ 22, 50

Intelligent Face Detection indicator........................49, 82

Red-eye removal indicator ........................................... 89

Pro focus mode, pro low-light mode ...................... 29, 30

Motion panorama z .......................................... 27, 58

Portrait enhancer .........................................................32

Advanced  lter ............................................................. 26

Gift image ....................................................................50

Frame number ...........................................................101

Dynamic range ............................................................. 79

E mode .............................................................24

Location data ...............................................................96

Mark for upload to ....................................................... 88

Photobook assist .......................................................... 56

Favorites .......................................................................51

DPOF print indicator ..................................................... 67

Protected image ........................................................... 90

5Before You Begin

Parts of the Camera

Hiding and Viewing Indicators

Photo Info

Hiding and Viewing Indicators

Press DISP/BACK to cycle through shooting and playback indicators as follows:

• Shooting:

Indicators displayed/indicators hidden/best framing/HD framing/histogram

• Playback: Indicators displayed/indicators hidden/I favorites (P 51)/photo info

Photo Info

4:3

ISO

800

1/1000

: : OFF

AUTO

: :

±0

12/ 31/2050 10: 00

100-0001

2.8

Histograms show the distribution of tones in the image. Brightness is shown by the horizontal axis, the number of pixels by the vertical axis.

Dynamic rangew Image size and quality

Sensitivity

Film simulationy Flash mode

Exposure compensationo Frame number

Picture (overexposed areas blink on and o )

Histogram

Shutter speed/aperture

No. of

pixels

White balance

Pixel brightness

Shadows Highlights

Optimal exposure: Pixels are distributed in an even curve throughout the tone range.

Overexposed: Pixels are clustered on the right side of the graph.

Underexposed: Pixels are clustered on the left side of the graph.

6 Before You Begin

Parts of the Camera

Battery Level

Indicator

Description

Bright Ambient Lighting

Battery Level

Battery level is shown as follows:

Indicator

D (white) C (white) B (red) A (blinks red)

Bright Ambient Lighting

Battery partially discharged. Battery more than half discharged. Low battery. Charge as soon as possible. Battery exhausted. Charge battery.

Description

Re ections and glare caused by bright ambient lighting may make it hard to see the display in the monitor, particularly when the camera is used outdoors. This can be addressed by holding the E-Fn button to trigger outdoor mode. Outdoor mode can also be enabled using the A SCREEN SET-UP> MONITOR SUNLIGHT MODE option (P 97).

7Before You Begin

First Steps

Charging the Battery

First Steps

Charging the Battery

The battery is not charged at shipment. Charge the battery before use.

Attach the plug adapter.

Attach the plug adapter as shown, making sure that it is fully inserted and clicks into place on the charger terminals.

Q The plug adapter is exclusively for use with the

supplied battery charger. Do not use it with other devices.

Place the battery in the supplied battery charger.

Insert the battery in the orientation indicated by the DFC

Battery

Arrow

labels.

Battery charger

Plug adapter

Charge lamp

DFC label

Charging the Battery

The Charging Indicator

Charging indicator

Battery status

Action

O

Battery not inserted.

Insert the battery.

Battery fully charged.

Remove the battery.

Battery charging.

—

Blinks

Battery fault.

Unplug the charger and remove the battery.

Plug the charger in.

Plug the charger into an indoor power outlet. The charging indicator will light.

The Charging Indicator

The charging indicator shows battery charge status as follows:

Charging indicator

O

Blinks

Charge the battery.

Battery status

Battery not inserted.

Battery fully charged.

Battery charging.

Battery fault.

Action

Insert the battery.

Remove the battery.

—

Unplug the charger and remove the battery.

Remove the battery when charging is complete. See the speci cations (P 124) for charging times (note that charging times increase both at high temperatures and at low temperatures).

Q Unplug the charger when it is not in use.

9 First Steps

Inserting the Battery and a Memory Card

Although the camera can store pictures in internal memory, optional SD, SDHC, and SDXC memory cards (sold separately) can be used to store additional pictures. After charging the battery, insert the battery and memory card as described below.

Open the battery-chamber cover.

R Be sure the camera is o before opening

the battery-chamber cover.

Q Do not open the battery-chamber cover

when the camera is on. Failure to observe this precaution could result in damage to image  les or memory cards.

Q Do not use excessive force when handling the battery-chamber cover.

Insert the battery.

Align the orange stripe on the battery with the orange

Orange stripe

battery latch and slide the battery into the camera, keeping the battery latch pressed to one side. Con rm that the battery is securely latched.

Q Insert the battery in the correct orientation. Do NOT use

force or attempt to insert the battery upside down or backwards. The battery will slide in easily in the correct orien-

tation.

Battery latch

10 First Steps

Inserting the Battery and a Memory Card

Insert the memory card.

Holding the memory card in the orientation shown at right, slide it in until it clicks into place at the back of the slot.

Q Be sure card is in the correct orientation; do not insert at

an angle or use force. If the memory card is not correctly inserted or no memory card is inserted, a will appear in the LCD monitor and internal memory will be used for recording and playback.

Q SD/SDHC/SDXC memory cards can be locked, making it

impossible to format the card or to record or delete images. Before inserting an SD/SDHC/SDXC memory card, slide the write-protect switch to the unlocked position.

Close the battery-chamber cover.

Click

Write-protect switch

11 First Steps

Inserting the Battery and a Memory Card

RRUsing an AC Power Adapter

Removing the Battery and Memory Card

Using an AC Power Adapter

• The camera can be powered by an optional AC power adapter and DC coupler (sold separately). See the manuals provided with the AC power adapter and DC coupler for details.

• Depending on the country or region of sale, a demo mode slide show may start if the camera is turned on while powered by an AC power adapter. Press the shutter button to end the show.

Removing the Battery and Memory Card

Before removing the battery or memory card, turn the camera o and open the battery-chamber cover.

To remove the battery, press the battery latch to the side, and slide the battery out of the camera as shown.

Battery latch

To remove the memory card, press it in and release it slowly. The card can then be removed by hand. When a memory card is removed, the card could come out of the slot too quickly. Use your  nger to hold it and gently release the card.

12 First Steps

Inserting the Battery and a Memory Card

QQMemory Cards

■ Compatible Memory Cards

FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been approved for use in the camera. A complete list of approved memory cards is available at http://www.fujifilm.com/support/digital_cameras/compatibility/. Operation is not guaranteed with other cards. The camera can not be used with xD-Picture Cards or MultiMediaCard (MMC) devices.

Memory Cards

• Do not turn the camera o or remove the memory card while the memory card is

being formatted or data are being recorded to or deleted from the card. Failure to

observe this precaution could damage the card.

• Format SD/SDHC/SDXC memory cards before  rst use, and be sure to reformat all

memory cards after using them in a computer or other device. For more information on formatting memory cards, see “K FORMAT” (P 103).

• Memory cards are small and can be swallowed; keep out of reach of children. If a

child swallows a memory card, seek medical assistance immediately.

• miniSD or microSD adapters that are larger or smaller than the standard dimensions

of an SD/SDHC/SDXC card may not eject normally; if the card does not eject, take the camera to an authorized service representative. Do not forcibly remove the card.

• Do not a x labels to memory cards. Peeling labels can cause camera malfunction.

• Movie recording may be interrupted with some types of SD/SDHC/SDXC memory

card. Use a H card or better for movies and burst photography.

13 First Steps

Inserting the Battery and a Memory Card

QQBatteries

• The data in internal memory may be erased or corrupted when the camera is repaired. Please note that the repairer will be able to view pictures in internal memory.

• Formatting a memory card or internal memory in the camera creates a folder in which pictures are stored. Do not rename or delete this folder or use a computer or other device to edit, delete, or rename image  les. Always use the camera to delete pictures from memory cards and internal memory; before editing or renaming  les, copy them to a computer and edit or rename the copies, not the originals.

Batteries

• Remove dirt from the battery terminals with a clean, dry cloth. Failure to observe this precaution could prevent the battery from charging.

• Do not a x stickers or other objects to the battery. Failure to observe this precaution could make it impossible to remove the battery from the camera.

• Do not short the battery terminals. The battery could overheat.

• Read the cautions in “The Battery and Power Supply” (P vi).

• Use only battery chargers designated for use with the battery. Failure to observe this precaution could result in product malfunction.

• Do not remove the labels from the battery or attempt to split or peel the outer casing.

• The battery gradually loses its charge when not in use. Charge the battery one or two days before use.

14 First Steps

Turning the Camera on and O

Shooting Mode

RRSwitching to Playback Mode

Playback Mode

RRSwitching to Shooting Mode

Turning the Camera on and O

Shooting Mode

Press the ON/OFF button to turn the camera on. The lens will extend automatically.

Playback Mode

To turn the camera on and begin playback, press the a button for about a second.

Press ON/OFF again to turn the camera o .

Switching to Playback Mode

Press the a button to start playback. Press the shutter button halfway to return to shooting mode.

Press the a button again or press the ON/OFF button to turn the camera o .

Switching to Shooting Mode

To exit to shooting mode, press the shutter button halfway. Press the a button to return to playback.

15 First Steps

Turning the Camera on and O

RRAuto Power O

Q Forcibly obstructing the lens could cause damage or product malfunction. Q Fingerprints and other marks on the lens can a ect pictures. Keep the lens clean.

Q The ON/OFF button does not completely end the supply of power to the camera.

Auto Power O

The camera will turn o automatically if no operations are performed for the length of time selected for Z POWER MANAGEMENT> AUTO POWER OFF (P 98).

16 First Steps

+ 113 hidden pages