Thank you for your purchase of this
product. This manual describes
how to use your FUJIFILM A160,
A170, A180, A220, A230 or A235
digital camera and the supplied
software. Be sure that you have
read and understood its contents
before using the camera.
For information on related products, visit our website at
http://www.fujifilm.com/products/index.html
More on Playback
Movies
Connections
Menus
Technical Notes
Troubleshooting
Appendix
Camera Q & A
Camera Setup
Question
Key phrase
See page
Taking Pictures
Question
Key phrase
See page
Find items by task.
Camera Setup
Question
How do I set the camera clock?Date and time10
Can I set the clock to local time when I travel?Time difference74
How do I keep the monitor from turning off automatically?Auto power off73
How do I stop the camera beeping and clicking?
What are the parts of the camera called?Parts of the camera2
What do the icons in the monitor mean?Monitor3
How do I use the menus?Menus54
What’s behind that flashing icon or error message in the monitor?Messages and displays84
How much charge is left in the battery?Battery level12
Can I increase the capacity of rechargeable Ni-MH batteries?Discharge75
Tak ing Pictur es
Question
How many pictures can I take?Memory capacity89
Is there a quick and easy way to take snapshots?
How can I make good portraits?Intelligent Face Detection17
Can the camera automatically select the most suitable mode?
Is there a simple way to adjust settings for different scenes?Shooting mode26
How do I shoot a panorama?
How do I shoot close-ups?Macro mode (Close-ups)21
Operation and shutter volume70
Key phrase
Silent mode23
Key phrase
k mode
G mode
W mode
See page
See page
12
27
28
ii
Camera Q & A
Question
Key phrase
See page
Viewing Pictures
Question
Key phrase
See page
Sharing Pictures
Question
Key phrase
See page
Question
How do I keep the flash from firing?
How do I “fill-in” shadows on back-lit subjects?
How do I take a group portrait that includes the photographer?Self-timer mode24
How do I frame pictures with the subject off to one side?Focus lock19
How do I shoot movies?Recording movies37
Viewing Pictures
Question
How do I view my pictures?Single-frame playback31
Is there a simple way to delete one image?Deleting pictures16
How do I delete one or all images at once?Erase35
Can I zoom in on pictures during playback?Playback zoom32
How do I view a lot of pictures at once?Multi-frame playback33
How do I view all pictures taken on the same day?Sort by date34
Can I protect my pictures from accidental deletion?Protect64
Can I hide the icons in the monitor when viewing my pictures?Choosing a display format31
How do I view my pictures on TV?Viewing pictures on TV40
Sharing Pictures
Question
Can I print pictures on my home printer?Printing pictures41
Can I copy my pictures to my computer?Viewing pictures on a computer47
Key phrase
Flash mode22How do I stop my subjects’ eyes glowing red when I use the flash?
Key phrase
Key phrase
See page
See page
See page
iii
Before You Begin
First Steps
Basic Photography and Playback
More on Photography
More on Playback
Movies
Connections
Table of Contents
Camera Q & A ..................................................................................... ii
Camera Setup ............................................................................... ii
Taking Pictures ............................................................................. ii
Viewing Pictures ......................................................................... iii
Sharing Pictures .......................................................................... iii
About This Manual ......................................................................... vi
This manual is for use with the following cameras: the DIGITAL CAMERA A160, A170, A180, A220, A230
and A235. All operations are identical; save where otherwise noted, the illustrations in this manual
show the A230.
Model
DIGITAL CA MERA A160 / A170 / A18010.2 million
DIGITAL CA MERA A 220 / A230 / A235 *12.2 million
* DIGITAL CAMERA A235 has a 3.0-inch monitor and the others each have a 2.7-inch monitor.
Before using the camera, read this Owner’s Manual and the other supplied documents. For
information on specific topics, consult the sources below.
Know what you want to do but don’t know the
name for it? Find the answer in “Camera Q & A.”
Effective pixels
✔
pg. ii
Image size (pixels)
3 : 2
rF/rN/gyF/yN/!
Table of Contents
.............................................
/o/n/m/p
3 : 2
/0/n/m/p
pg. iv
The “Table of Contents” gives an overview of the
entire manual. The principal camera operations
are listed here.
Troubleshooting
Having a specific problem with the camera?
Find the answer here.
Glossary
The meanings of some technical terms may be
found here.
Memory Cards
Pictures can be stored in the camera’s internal memory or on optional SD and SDHC memory cards. In this
manual, SD memory cards are referred to as “memory cards.” For more information, see page 5.
Find out what’s behind that flashing icon or
error message in the monitor.
Restrictions on Camera Settings
See another supplied document for restrictions
on the options available in each shooting mode.
vi
pg. 84
Introduction
Symbols and Conventions
Supplied Accessories
Symbols and Conventions
The following symbols are used in this manual:
C Caution: This information should be read before use to ensure correct operation.A Note: Points to note when using the camera.B Tip: Additional information that may be helpful when using the camera.
Menus and other text in the camera monitor are shown in bold. In the illustrations in this manual, the
monitor display may be simplified for explanatory purposes.
Supplied Accessories
The following items are included with the camera:
FinePix software CD
AA alkaline (LR6) batteries (×2)USB cable
Before You Begin
Strap
Att aching the Strap
Attach the strap as shown.
Owner’s Manual
(may be distributed
on CD in some
countries or regions)
1
Parts of the Camera
Parts of the Camera
18
19
For more information, refer to the page listed to the right of each item.
Pressing the o button briefly increases monitor brightness, making the display easier to see in bright light.
Normal brightness is restored when a photograph is taken.
2
The Monitor
The Monitor
■■ Shooting
10 : 00
AM
2
3
-
1
ISO
100
NN9
12/ 31/ 2050
■■ Playback
ISO
100
100-0001
12/ 31/ 2050
10 : 00
AM
250
F
3.3
N
2
3
-
1
The following indicators may appear in the monitor during shooting and playback:
7 Gift image ...........................................31
8 Frame number .................................71
* This icon appears when playing back an image with red-eye removed
10:00
AM
2
-
1
3.3
3
F
using another Fujifilm camera, although the camera does not have the
function.
Introduction
Before You Begin
3
Inserting the Batteries
Battery casing
Battery casing
The camera takes two AA alkaline (LR6) batteries (supplied) or two AA rechargeable Ni-MH batteries
(sold separately). Insert the batteries in the camera as described below.
Open the battery-chamber cover.
1
First Steps
A Note
Be sure the camera is
off before opening the
battery-chamber cover.
C Cautions
• Do not open the batterychamber cover when
the camera is on. Failure to observe this
precaution could result in damage to image
files or memory cards.
• Do not use excessive force when handling the
battery-chamber cover.
Insert the batteries.
2
Insert the batteries in the
orientation shown by the
“E” and “F” marks inside
the battery chamber.
4
Close the battery-chamber cover.
3
C Cautions
• Insert the batteries in the correct orientation.
• Never u se batteries with
peeling o r damaged casing
or mix old a nd new batteries,
batteries with different charge
levels, or batteries of different
types. Failure to observe these precautions
could result in the batteries leaking or
overheating.
• Never u se manganese or Ni-Cd. Replace AA alkaline
batteries with batteries of the same make and
grade as those supplied with the camera.
• If the b attery-chamb er cover can not be latched ea sily,
confirm the ba ttery orientatio n first. Do not use
excessive force to la tch it.
Battery casing
Battery casing
Inserting a Memory Card
■■ Compatible Memory Cards
Write-protect switch
Although the camera can store pictures in internal memory, SD memory cards (sold separately) can
be used to store additional pictures.
When no memory card is inserted, d appears in the monitor and internal memory is used for recording
and playback. Note that because camera malfunction could cause internal memory to become
corrupted, the pictures in internal memory should periodically be transferred to a computer and
saved on the computer hard disk or on removable media such as CDs or DVDs. The pictures in
internal memory can also be copied to a memory card (see page 65). To prevent internal memory
from becoming full, be sure to delete pictures when they are no longer needed.
When a memory card is inserted as described below, the card will be used for recording and playback.
Compatible Memory Cards
SanDisk SD and SDHC memory cards have been tested and approved for use in the camera. A
complete list of approved memory cards is available at http://www.fujifilm.com/products/digital_cameras/index.html. Operation is not guaranteed with other cards. The camera can not be used with
MultiMediaCard (MMC) or xD-Picture cards.
C Caution
Memory cards can be locked, making it impossible to format the card or to record
or delete images. Before inserting a memory card, slide the write-protect switch to
the unlocked position.
Write-protect switch
First Steps
5
■■ Inserting a Memory Card
Inserting a Memory Card
Open the battery-chamber cover.
1
Insert the memory card.
2
Holding the memory card in the orientation
shown below, slide it all the way in.
CLICK
Inserting a Memory Card
Be sure card is in correct
orientation; do not insert
at an angle or use force.
Close the battery-chamber cover.
3
6
Removing Memory Cards
Be sure the camera is off before opening the
battery-chamber cover. Press the card in and then
release it slowly. The card can now be removed by
hand.
C Cautions
• The memory card may spring out if you remove
your finger immediately after pushing the card in.
• Memory cards may be warm to the touch after
being removed from the camera. This is normal
and does not indicate a malfunction.
Inserting a Memory Card
First Steps
7
Inserting a Memory Card
C Cautions
rmat memory cards before first use, and be sure to reformat all memory cards after using them in a
• Fo
computer or other device. For more information on formatting memory cards, see page 73.
• Memory cards are small and can be swallowed; keep out of reach of children. If a child swallows a memory
card, seek medical assistance immediately.
• Do not use miniSD or microSD adapters that expose the back of the card. Failure to observe
this precaution may cause damage or malfunction. Adapters that are larger or smaller than
the standard dimensions of an SD card may not eject normally; if the card does not eject,
take the camera to an authorized service representative. Do not forcibly remove the card.
• Do not turn the camera off or remove the memory card while the memory card is being formatted or data are
being recorded to or deleted from the card. Failure to observe this precaution could damage the card.
• Do not affix labels to memory cards. Peeling labels can cause camera malfunction.
• Movie recording may be interrupted with some types of memory card.
• The data in internal memory may be erased or corrupted when the camera is repaired. Please note that the
repairer will be able to view pictures in internal memory.
• Formatting a memory card or internal memory in the camera creates a folder in which pictures are stored.
Do not rename or delete this folder or use a computer or other device to edit, delete, or rename image
files. Always use the camera to delete pictures from memory cards and internal memory; before editing or
renaming files, copy them to a computer and edit or rename the copies, not the originals.
8
Turning the Camera on and Off
Shooting Mode
Playback Mode
Shooting Mode
Press the n button to turn the camera on.
The lens will extend and the lens cover will open.
Press n again to turn the camera off.
B Tip: Switching to Playback Mode
Press the D button to start playback. Press the
shutter button halfway to return to shooting mode.
C Cautions
• Pictures can be affected by fingerprints and other
marks on the lens. Keep the lens clean.
• The n button does not completely disconnect
the camera from its power supply.
Tip: Auto Power Off
B
The camera will turn off automatically if no operations are performed for the length of time selected in the
AUTO POWER OFF menu (see page 73).
Playback Mode
To turn the camera on and begin playback, press
the D button for about a second.
Press the D button again to turn the camera off.
B Tip: Switching to Shooting Mode
To exit to shooting mode, press the shutter button
halfway. Press the D button to return to playback.
First Steps
9
Basic Setup
SETNONO
START
MENU
/ LANG.
A language-selection dialog is displayed the first time the camera is turned on. Set up the camera as
described below (for information on resetting the clock or changing languages, see page 69).
Choose a language.
1
1.1 Press the selector up, down,
left, or right to highlight a
language.
1.2 Press MENU/OK.
10
START
MENU
SET
/ LANG.
Set the date and time.
2
DATE / TIME NOT SET
2011
2010
YY.MM.DD1. 1 12
SETNO
2009
2008
2007
:
00
AM
2.1 Press the selector left or right
to highlight the year, month,
day, hour, or minute and press
up or down to change. To
change the order in which the year,
month, and day are displayed, highlight
the date format and press the selector
up or down.
2.2 Press MENU/OK.
Check the battery type.
3
A confirmation message for the battery
type to be used appears.
Alkaline batteries are selected by default.
Basic Setup
A Note
o the setup menu if you try to set the language, date or battery type again (pg. 69).
Go t
Tip: The Camera Clock
B
If the batteries are removed for an extended period, the camera clock and battery type will be reset when the
camera is turned on. If the batteries have been left in the camera for about 2 hours or more, the batteries can
be removed for about 24 hours without resetting the clock.
First Steps
11
Taking Pictures in k (Auto) Mode
Indicator
Descri ption
This section describes how to take pictures in k mode.
Turn the camera on.
1
Press the n button to turn the
camera on.
Basic Photography and Playback
B Tip: Intelligent Face Detec tion
The first time the camera is turned on, Intelligent Face
Detection is automatically activated and the camera is
optimized for taking portrait photographs. For more
information on using Intelligent Face Detection, see
page 17.
12
Check the battery level.
2
Check the battery level in the monitor.
qw e
Indicator
(whit e)
q
(whit e)Batteries more than half
w
(red )Batteries are low. Replace as soon
e
(blinks red) Batteries are exhausted. Turn
r
Batteries partially discharged.
discharged.
as possible.
camera off and replace batteries.
Description
r
Taking Pictures in k (Auto) Mode
Frame the picture.
3
Position the main subject in the focus area
and use the zoom buttons to frame the
picture in the monitor.
Press W to zoom outPress T to zoom in
Zoom indicator
Holding the Camera
Hold the camera steady
with both hands and brace
your elbows against your
sides. Shaking or unsteady
hands can blur your shots.
To prevent pictures that
are out of focus or too dark
(underexposed), keep your
fingers and other objects
away from the lens and
flash.
Zoom in using optical
zoom, or use digital
zoom (pg. 72) to zoom in
closer.
B Tip: Focus Lock
Use focus lock (pg. 19) to focus on subjects that are not in the focus frame.
Basic Photography and Playback
13
Taking Pictures in k (Auto) Mode
1/ 250
F
3.3
Framing Guideline
The images change as shown below if you press the
DISP/BACK button.
Indicators
displayed
Indicators
hidden
Best framing
To use the best framing, position the main subject
at the intersection of two lines or align one of the
horizontal lines with the horizon. Use focus lock (pg.
19) to focus on subjects that will not be in the center
of the frame in the final photograph.
Focus.
4
Press the shutter button halfway to focus on
the main subject in the focus frame.
1/ 250
F
3.3
Focus frame
Camera selects small
Press
halfway
focus frame and
focuses on subject
If the camera is able to focus, it will beep twice
and the indicator lamp will glow green.
If the camera is unable to focus, the focus frame
will turn red, a R indicator will appear
in the monitor, and the indicator lamp will
blink green. Change the composition or
use focus lock (pg. 19).
A Note
The lens may make a noise when the camera focuses.
This is normal.
14
Taking Pictures in k (Auto) Mode
Indicator lamp
Camera status
Shoot.
5
Smoothly press the shutter
button the rest of the way down
to take the picture.
B Tip: The Shutter Button
The shutter button has
two positions. Pressing the
shutter button halfway (q)
sets focus and exposure;
to shoot, press the shutter
button the rest of the way
down (w).
A Note
If the subject is poorly lit, the flash may fire when the
picture is taken. To take pictures without the flash,
choose another flash mode (pg. 22).
Double
Double
beep
beep
qw
qw
CLICK
CLICK
The Indicator Lamp
Indicator lamp
The indicator lamp shows camera status as follows:
Indicator lamp
Glows green Focus locked.
Blinks green
Blinks green
and orange
Glows
orange
Blinks orange
Blinks red Recording or lens error.
B Tip: Warnings
Detailed warnings appear in the monitor. See pages
85–88 for more information.
Camera shake warning, AF warning,
or AE warning (ready to shoot)
Recording pictures. Additional
pictures can be taken.
Recording pictures. No additional
pictures can be taken at this time.
Flash charging; flash will not fire
when picture is taken.
Camera status
Basic Photography and Playback
15
Viewing Pictures
ISO
100
100-0001
12/ 31 /2050
10: 00
AM
N
250
F
3.3
Pictures can be viewed in the monitor. When taking important photographs, take a test shot and
check the results.
16
Press the D button.
1
The most recent picture will be displayed in
the monitor.
100-0001
N
ISO
100
12/ 31 /2050
10:00
AM
250
View additional pictures.
2
Press the selector right to view
F
3.3
pictures in the order recorded,
left to view pictures in reverse
order.
Press the shutter button to exit to shooting
mode.
Deleting Pictures
To delete the picture
currently displayed in the
monitor, press the selector
A). The following
up (
dialog will be displayed.
ERASE OK?
OKCANCEL
SET
To delete the picture, press the selector
left to highlight OK and press MENU/OK.
To exit without deleting the picture,
highlight CANCEL and press MENU/OK.
B Tip: The Playback Menu
Pictures can also be deleted from the playback
menu (pg. 35).
Intelligent Face Detection
Intelligent Face Detection allows the camera to automatically detect human faces and set focus and
exposure for a face anywhere in the frame for shots that emphasize portrait subjects. Choose for
group portraits to prevent the camera from focusing on the background.
Turn Intelligent Face Detection on.
1
1.1 Press MENU/OK to display the
shooting menu.
SHOOTING MENU
SHOOTING MODE
FACE DETECTION
ISO
QUALITY
CONTINUOUS
1.2 Press the selector up or
down to highlight c FACE DETECTION.
1.3 Press the selector right
to display Intelligent Face
Detection options.
1.4 Press the selector up or down
to highlight the desired option.
AUTO
OFF
1.5 Press MENU/OK to select the
highlighted option and return
to shooting mode.
B icon appears in monitor
when Intelligent Face
N
Frame the picture.
2
If a face is detected, it will
Detection is on.
More on Photography
be indicated by a green
border. If there is more
than one face in the
frame, the camera will
select the face closest
Green borderGreen border
to the center; other faces are indicated by
white borders.
17
Intelligent Face Detection
77
Focus.
3
Press the shutter button halfway
to set focus and exposure for the
subject in the green border.
C Cautions
• If no face is detected when the shutter button
is pressed halfway (pg. 80), the camera will
focus on the subject at the center of the
monitor.
• In each shooting mode, the camera will detect
and focus on faces but exposure will be
optimized for the entire scene rather than the
selected portrait subject.
Shoot.
4
Press the shutter button all the
way down to shoot.
C Caution
If the subject moves as the shutter
button is pressed, their face may not be in the
area indicated by the green border when the
picture is taken.
Intelligent Face Detection
Intelligent Face Detection is
recommended when using the
self-timer for group- or selfportraits (pp. 24–25).
The camera can zoom in on pictures taken with
Intelligent Face Detection during slide shows (pg.
63).
7
18
Focus Lock
250
F
3.3
250
F
3.3
To compose photographs with off-center subjects:
Position the subject in the focus frame.
1
Focus.
2
Press the shutter button halfway to set
focus and exposure. Focus and exposure
will remain locked while the shutter button
is pressed halfway (AF/AE lock).
250
F
3.3
Press
halfway
Repeat steps 1 and 2 as desired to refocus
before taking the picture.
Recompose the picture.
3
Keeping the shutter button pressed
halfway, recompose the picture.
250
F
3.3
Shoot.
4
Press the shutter-release button the rest of
the way down to take the picture.
Press the rest of
the way down
More on Photography
19
Focus Lock
Autofocus
Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects
listed below. If the camera is unable to focus using autofocus, use focus lock (pg. 19) to focus on another
subject at the same distance and then recompose the photograph.
• Very shiny subjects such as mirrors or car bodies.
• Fast-moving subjects.
• Subjects photographed through a window or other reflective object.
• Dark subjects and subjects that absorb rather than reflect light, such as hair or fur.
• Insubstantial subjects, such as smoke or flame.
• Subjects that show little contrast with the background (for example, subjects in clothing that is the same
color as the background).
• Subjects positioned in front of or behind a high-contrast object that is also in the focus frame (for example, a
subject photographed against a backdrop of highly contrasting elements).
20
L Macro mode (Close-ups)
To select macro mode, press the selector left (L).
L icon appears in monitor when
camera is in macro mode
When macro mode is in effect, the camera focuses on subjects near the center of the monitor. Use
the zoom buttons to frame pictures.
To exit macro mode, press the selector left (L). Macro mode can also be cancelled by turning the
camera off or selecting another shooting mode.
A Note
Use of a tripod is recommended to prevent blur caused by camera shake.
More on Photography
21
K Using the Flash
Mode
Descri ption
Use the flash when lighting is poor, for example when shooting at night or indoors under low light.
To choose a flash mode, press the selector right (K). The flash mode
changes each time the selector is pressed; in modes other than AUTO, the
current mode is indicated by an icon in the monitor. Choose from the
following options (some options are not available in all shooting modes;
see the restrictions in another supplied document):
Mode
AUTO (no icon) The flash fires when required. Recommended in most situations.
S (red eye
reduction)
K (fill flash)
W (suppressed
flash)
T (slow sync)
Z (red eye
reduction +
slow sync)
Recommended to take a portrait shot in the dark. Red-eye can be reduced.
The flash fires whenever a picture is taken. Use for backlit subjects or for natural coloration
when shooting in bright light.
The flash does not fire even when the subject is poorly lit. 0 will appear in the monitor at
slow shutter speeds to warn that pictures may be blurred. Use of a tripod is recommended.
Capture both the main subject and the background when shooting at night (note that
brightly lit scenes may be overexposed). If U is selected for a SHOOTING MODE, shutter
speed may be slow. Use a tripod. In Z mode, red-eye can be reduced.
Description
If the flash will fire, X will be displayed in the monitor when the shutter button is pressed halfway.
C Caution
The flash may fire several times with each shot. Do not move the camera until shooting is complete.
22
( Silent Mode
In situations in which camera sounds or light from
the flash may be unwelcome, press the DISP/BACK
button until ( is displayed in the monitor.
K Using the Flash
The camera speaker, shooting indicator, flash, and
indicator and self-timer lamps turn off. Flash and
volume settings (pg. 72) can not be adjusted while
silent mode is in effect. To restore normal operation,
press the DISP/BACK button until the ( icon is no
longer displayed.
More on Photography
23
J Using the Self-Timer
9
The camera offers a ten-second timer that allows photographers to appear in their own photographs,
and a two-second timer that can be used to avoid blur caused by the camera moving when the
shutter button is pressed.
Set the timer.
1
The current self-timer mode is displayed in the monitor. To choose a different setting, press the
selector down (J). The selection changes each time the selector is pressed.
The current self-timer mode is
displayed in the monitor.
c : The picture is taken after 10
seconds.
b : The picture is taken after 2
seconds.
Focus.
2
Press the shutter button halfway to focus.
C Caution
Stand behind the camera when using the shutter button. Standing in front
of the lens can interfere with focus and exposure.
Start the timer.
3
Press the shutter button the rest of the way down to start the timer.
The display in the monitor shows the number of seconds remaining
until the shutter is released. To stop the timer before the picture is
taken, press DISP/BACK.
24
Loading...
+ 72 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.