FujiFilm F50 User Manual

/ t

F50

SETNONO

START MENU

/ LANG.

SETNONO

DATE / TIME NOT SET

YY.MM.DD

1. 1 12:00 AM

SET NO

POWER MANAGEMENT

POWER SAVE

Power saving for longer battery life

QUICK AF CLEAR DISPLAY

Camera Controls

Shutter button

Dual IS button

Zoom switch

Flash

AF-assist illuminator/ Self-timer lamp

Lens (lens cover)

FinePix F50fd has internal memory that can store images without Memory Card. Use a Memory Card (sold separately) when recording a large number of images.

BL00631-200(1) E

Picture Taking

A. Charging the Battery

Rechargeable Battery

NP-50 Battery Charger

BC-50

To power outlet

B. Loading the Battery

POWER button

Infrared port

Microphone

Speaker

Battery release catch

Memory Card slot

Load the battery into the battery charger BC-50. Set the battery correctly as indicated by the polarity icon.

Plug the battery charger into a power outlet. The charging indicator lights red and charging begins. When charging is completed, the indicator lights green. Charging ends after about 2.3 hours.

Mode dial

Indicator lamp w (Playback) button

4-direction (nopq) button

LCD monitor

Tripod mount

Battery compartment

Batter

cover DC coupler cable cove

Photo mode (p) button

Terminal cove

A/V OUT (Audio

Visual output) socke

USB socke

MENU/OK button

Strap moun

Intelligent Face Detection

/bRed-eye removal button

DISP (Display)

BACK button

Refer to Owner’s Manual for more detailed instructions

POWER MANAGEMENT

POWER SAVE

QUICK AF CLEAR DISPLAY

Power saving for longer battery life

SET NO

A Set the POWER MANAGEMENT

options. Select an option from the menu.

B Press MENU/OK to confirm the

setting.

D. Taking Pictures

Press POWER down fully to turn the camera on.

Set the Mode dial to B.

Press the shutter button down halfway to adjust the focus.

Battery release catch

Indicators

C. Setting up the Camera

START MENU

/ LANG.

SET

DATE / TIME NOT SET

YY.MM.DD

SET

1. 1 12:00 AM

Make sure that the indicators are aligned. Push the battery release catch aside while loading the battery. Check that the battery is firmly held in place.

Press POWER down fully to turn the camera on.

A screen appears on the

LCD monitor.

B Press n, o, p, or q to select the

language.

C Press MENU/OK to confirm the

setting.

A You can select your preferred date

format.

B Press p or q to select Year, Month,

Day, Hour, or Minute. Press n or o to correct the setting. ✽ Refer to the Owner’s Manual for

“Turning On and Off”.

Halfway pressed

Fully pressed

Press the shutter button down fully to take a picture. The camera makes a “Click” sound and takes the picture.

E. Viewing the Images

How to insert a Memory Card.

Align the gold marking with the gold contact area, then insert an xD-Picture Card or SD Memory Card completely.

Press w.

Press p or q to move through your images.

Gold marking

Gold contact area

Using Intelligent Face Detection

/3131

20 50 1010

:0000

AMAM

/3131

20 50 1010

:0000

AMAM

ISO

AUTO

(400)

ISO

AUTO

(400)

With Intelligent Face Detection, the subject’s face(s) is detected and focused on automatically, so you can take a picture of people in most suitably lit conditions.

Intelligent Face Detection will even detect and focus on two faces on opposite sides of

ISO

AUTO

(400)

ISO

AUTO

(400)

2050

the frame, where ordinarily the background in the center of the frame would be focused. In addition, Intelligent Face Detection adjusts for the brightness of the faces.

Push

to zoom in on a face when playing back the image taken with Intelligent Face

Detection.

Viewing Images on your PC

A.Installing Software

B.Connecting the Camera to your PC

C.Saving the Images

A. Installing Software

Do not connect the camera to your PC until the software installation is completed.

1. Turn on your PC and start up Windows.

Users of Windows 2000 Professional or Windows XP or Windows

●

Vista should log in by using a system administrator account (e.g. “Administrator”).

2. Quit all other active applications until no applications are shown in the taskbar.

3. Load the enclosed CD-ROM into the CD-ROM drive. The installer starts up automatically. For Windows Vista users: When loading the bundled CD-ROM on your PC, the “AutoPlay” window may appear. In this case, click “SETUP. exe”. When “User Account Control” window appears, click “Allow”.

4. The Setup screen appears. Click the [Installing FinePixViewer] button.

5. After installation completed, press [Restart] button.

B. Connecting the Camera to your PC

1. Insert the Memory Card with images into the camera.

2. Connect the camera to your PC using the USB cable (included).

Windows 98 SE/Me/2000 Professional

FinePixViewer starts up automatically.

Windows XP/Vista

The “Found New Hardware” help message appears in the bottom-right corner of your screen. This message will close when the settings are completed. No action is required.

FinePixViewer starts up automatically.

C. Saving the Images

1. The Save Image Wizard starts up. Click the [Start] button.

2. Check that the files are downloaded from the camera to your PC and that a folder with the date is created.

Ex. \My Documents \ My Pictures \ 2007_0801

D. Viewing the Images

1. Click the [Show List of Images] button.

USB socket

3. Press w for about 1 second to turn the camera on in

Playback mode.

Select “Preview” in the View menu to display an enlarged image.

For more information

Refer to “How to use FinePixViewer” in the HELP menu, or “Software Installation” in the Owner’s Manual, or visit Fujifilm “Q&A Search” in the following website. ( http://www.fujifilm.com/products/digital/ ) For Macintosh users, refer to “Software Installation” in the Owner’s Manual.