Fujica Auto Winder X User Manual

INSTRUCTIONS

FU"ICA AUTO WINDER X

[.SPECIAL FEATURES

Your Fujica Auto Winder X is an automatic film winder
specially designed for use on the Fujica AX-5, FuJica
AX-3 and Fujica AX-1. It is compact and light and
attaches directly to the camera bottom. With the Auto
Winder attached, the film is always in position for
exposure so that you will not tose any shooting op-
portunities to capture your subject. It is also provided
for single trame and continuous.shooting, and change-
ayer of the operation mode is achieved by means of

the main switch.

¡ [8SPECIFICATIONS

Winding Speed
Starting

Usable Shutter
Speeds

Exposure Count-
ing
Film Advance

Check
Automatic Stop

Power Source

Mounting

Oimensions

Weight

Approx. 2 trames per seco
Bydepressing the camera's shutter
release button.
Continuous shooting: B, 2 to
1/1000 seco .
Single-trame shooting: B, 2 to
1/1000 seco
By means of the camera's expo-

sure counter.
An LEO light turns on while the
Auto Winder is advancing the film.

The Auto Winder stops automati-
cally when all of the film has been
transported or the battery voltage

is toa low.
Four penlight batteries. (AAsize)

Battery capacity: In normal tem-

perature, 20 or more 36-exposure

rolls with alkaline batteries.
Attaches on the camera bottom
via tripod socket.

137x36x37.5mm
250 9 (without batteries)

[.NAMES OF PARTS

CDBattery Compartment

Cover

Printed in Japan

@ Main Switch

CIDFilm Advance Coupler

@ Positioning fin

FUJI PHOTO FILM eo., LTD.

26-30, Nishiazabu 2-chome, Minato-ku Tokyo 106,Japan

(1) Mounting Screw

I7'-681610-SH'I-II@