Frymaster FPH55-2 User Manual

ymaster

™

FootPrint® Filtration for Single H55 Gas Fryers

Models

F PH55 F PH55- 2*

Project

Item

Quantity

CSI Sec tion 11400

Approval

Date

FootPrint Filtration for Single H55 Gas Fryers

*Not available for CE.

FPH55

Shown with optional

CM3.5 controller and legs on front

Specifications

Designed for trouble-free filtering of H55 single fryers without wasting valuable space

Frymaster’s renowned, built-in filtration puts filtration where it’s most convenient to use -- right within the fryer -- eliminating the need for additional floor and storage space.

The filtering process is fast and easy, encouraging frequent filtering -- a critical part of maximizing oil life, especially with trans-fat free oils. It is engineered with features that allow added convenience, easier serviceablilty and allows for using three different filter mediums with one pan.

This filtration is enhanced with a gravity draining system that allows

Standard Features

• 50-lb (25-liter) oil capacity

•

Space-saving filter fits inside fryer cabinet

which houses one frypot

• Filter pan is lightweight and easy to

remove for cleaning

• Filter pan designed on rails to clear floor-

mats for easy cleaning

• Sloped drain pan leaves minimal oil in the

pan after filtering

• Filter cycle is complete from start to finish

in less than 5 minutes

• 1-1/4” (3.2 cm) IPS ball-type drain valve

on full frypot

• 1” (2.5 cm) IPS ball-type drain valve on

split frypot

• Drain safety switch on all Frymaster filter

system fryers

residual oil to drain into the filter pan so that drain lines are always open. The filter, housed beneath one Frymaster H55 fryer is capable of filtering the fifty-pound fryer in less than five minutes.

This filter comes standard with a powerful 4 GPM pump to maximize filtering efficiency and minimize clogging. Large sump with secure hold-down ring ensures proper vacuum and superior oil filtration. The stainless steel filter pan slides out easily over floor mats and uneven floor tiles.

Filtration process is two steps: Step one: open drain valve, open return valve to activate filter pump. Step two: close drain valve; close return valve to turn off pump

• Rear oil flush

• 1/3 H.P. filter motor

• 4 GPM pump

• Stainless steel crumb catcher

• Filter starter kit

• Casters

Options & Accessories

SDU for oil disposal

See H55 gas spec sheet for fryer options.

See Frymaster domestic price list for other available options and accessories.

All models meet

ENERGY STAR® gu idelines

8700 Line Avenue

Shreveport, LA 71106-6800

USA

Tel: 318-865-17 11

Tel: 1-800-221- 4583

Fax: 318-86 8-5987

E-mail: in fo@frymaster.com

www.frymast er.com

Bulletin N o. 818-0184

Printed 9/10

Revised 10 /7/11

ymaster

™

GAS LINE

DRAIN HEIGHT

13.50 [343]

DIMENSIONS

MODEL NO. DR AIN HE IGH T

FPH55

FPH55 -2

(34.3 cm)

14.00 [356]

TOP VIEW

15.63 [397]

FRONT VIEW

cm

13-1/ 2”

10.25 [260]

27.09

[688]

35.69

[907]

31.58 [802]

6 ft. (1.8m) CORD SET 120V PROVIDED

45.30

[1151]

35.50

[902]

21.00

FILTER DRAIN

6.00

[152]

SIDE VIEW

GAS LINE

6.50

[165]

[533]

FootPrint Filtration for Single H55 Gas Fryers

NE T W EIG HT SH IPP ING IN FOR MATI ON

WE IGH T CL ASS CU. FT. DI MEN SIO NS

cm

235 l bs.

(107 kg)

265 l bs.

(121 kg)

85 31.95 W

(63.5 cm)

25”

47”

(119. 4 cm )

47”

(119. 4 cm )

POWER REQUIREMENTS FOR FILTER ONLY

AMPERAGE FOR FILTER ONLY -- Filter Motor -- Domestic: 120V 7.5 A; Export/CE: 220V - 250V 5 A

NOTES

Contact Customer Service at 1-800-221-4583 inside USA: +1-318-865-1711 outside

USA for other voltages.

CLEARANCE INFORMATION

A minimum of 24” (61.0 cm) should be

provided at the front of the unit for

servicing and proper operation, and 6” (15.2 cm) between the sides and rear of

the fryer to any combustible material.

FOR FRYER SPECIFICATIONS, FEATURES AND OPTIONS, SEE H55 SPEC SHEET.