FRTEK 23 25 21 24, 1900 24, 2100 24, 700 850 21 User Manual

INOVA DAS Operating Manual

Document Reference

Company: Fiber Radio Technologies Version: Ver 1.1 Document Status: Release 1 Issue Date: 2019. 03. Department: R&D Group 2 Author Manager: Jun Hyun, Lee

INOVA DAS

Operating Manual

INOVA DAS Operating Manual

▪ Copyright

The copyright of this manual is from FRTek Co., Ltd.

This manual may not be reproduced, distributed, modified on any form without the consent of FRTek Co., Ltd

Unauthorized disclosure, distribution, copying or use of the information contained in this document in whole or in part without authority is strictly prohibited.

▪ Trademark

The trademarks mentioned in this manual are registered trademarks of the respective company.

Please read this service manual before installation and operation. Use the system only in accordance with contents of this manual.

 The specification and information regarding the products in this manual are subject to change due to updates to system functionality or

system revision changes without notice. For the latest revision of this manual or for technical inquiries, please contact below :

Company Address : 181 Metro Drive, Suite 580, San Jose, CA 95110

Homepage : http://www.frtek.com

Contact for technical inquires or troubleshooting.

Telephone : 330-622-2911 or 510-390-1939

INOVA DAS Operating Manual

Version

Issue Date

Details of Revision

Author

Authorizing

Manager

V 1.0

19. 01. 02.

Original

Jun Hyun, Lee

V 1.1

19. 03. 29.

Original

Jun Hyun, Lee

Revision History

This manual is produced by R&D Group 2 Printed in FRTek.

INOVA DAS Operating Manual

Contents

Chapter 1. Safety & Certification Notice ..................................................................................................... 8

1.1 FCC/IC Warning Statements ................................................................................................................. 9

1.1.1 FCC Part 15.105 statement ............................................................................................................ 9

1.1.2 FCC Part 15.21 statement .............................................................................................................. 9

1.1.3 Health and Safety Warnings ......................................................................................................... 9

1.1.4 RSS-GEN, Sec. 7.1.2 – (transmitters) .......................................................................................... 10

1.1.5 RSS-GEN, Sec. 7.1.2 – (detachable antennas) .......................................................................... 10

1.1.6 RF Radiation Exposure.................................................................................................................. 11

1.2 Certification Notice .............................................................................................................................. 13

Chapter 2. System Overview ......................................................................................................................... 15

2.1 System Overview .................................................................................................................................. 16

2.1.1 Overview ......................................................................................................................................... 16

2.1.2 INOVA DAS Design Considerations ........................................................................................... 17

2.2 System Network Configuration ......................................................................................................... 19

Chapter 3. System Configuration ................................................................................................................. 21

3.1 ERU Figure and Configuration ........................................................................................................... 22

Chapter 4. System Specification .................................................................................................................. 24

4.1 System Specification ............................................................................................................................ 25

4.1.1 System Specification per Frequency Band – 700MHz ............................................................ 25

4.1.2 System Specification per Frequency Band – 850MHz ............................................................ 26

4.1.3 System Specification per Frequency Band – 1.9GHz .............................................................. 27

4.1.4 System Specification per Frequency Band – 2.1GHz .............................................................. 28

4.1.5 System Specification per Frequency Band – 2.3GHz .............................................................. 29

4.1.6 System Specification per Frequency Band – 2.5GHz .............................................................. 29

4.1.7 System Specification per Frequency Band – 2.6GHz .............................................................. 30

4.2 Organization Specification .................................................................................................................. 31

INOVA DAS Operating Manual

4.2.1 Structure and Type ........................................................................................................................ 31

4.2.2 Manufacturing and Processing ................................................................................................... 32

4.2.3 Materials and Components ......................................................................................................... 32

4.3 Electrical Specification ......................................................................................................................... 33

4.4 Environmental Specification ............................................................................................................... 33

Chapter 5. System Installation ..................................................................................................................... 35

5.1 Tools ........................................................................................................................................................ 36

5.2 ERU Installation .................................................................................................................................... 38

5.2.1 Product Ceiling Installation ......................................................................................................... 38

5.2.2 Product Wall Installation .............................................................................................................. 39

5.2.3 Antenna Connection ..................................................................................................................... 40

5.3 2.5GHz, 2.6GHz Setting Method ....................................................................................................... 40

Chapter 6. Local GUI(Graphical User Interface) ........................................................................................ 42

6.1 Local GUI Main Screen ........................................................................................................................ 43

6.2 Local GUI ERU Screen .......................................................................................................................... 47

6.2.1 ERU Main Screen ........................................................................................................................... 47

6.2.2 ERU Main Screen per Frequency ................................................................................................ 49

Chapter 7. Alarm and Corrective Action .................................................................................................... 57

7.1 Alarm Phenomenon and Solution ..................................................................................................... 58

INOVA DAS Operating Manual

Figures

Figure 1. Basic Network Configuration. ................................................................................................................. 19

Figure 2. Extended Network Configuration. ......................................................................................................... 20

Figure 3. ERU Configuration ..................................................................................................................................... 22

Figure 4. ERU Port Configuration. ........................................................................................................................... 23

Figure 5. ERU Ceiling Installation. ........................................................................................................................... 38

Figure 6. ERU Ceiling Installation Assemble. ........................................................................................................ 38

Figure 7. ERU Anchor Bolt Wall Assemble. ........................................................................................................... 39

Figure 8. ERU Wall Installation Assemble. ............................................................................................................. 39

Figure 9. ERU Antenna Connection. ........................................................................................................................ 40

Figure 10. For 2.5GHz Service, Insert 2.5GHz MRFU/ERFU/Multiplexer Module. ........................................ 41

Figure 11. For 2.6GHz Service, Insert 2.6GHz MRFU/ERFU/Multiplexer Module. ........................................ 41

Figure 12. Local GUI Initial Screen. ......................................................................................................................... 43

Figure 13. Local GUI Main Screen. .......................................................................................................................... 44

Figure 14. Spectrum Analyzer Window Screen. ................................................................................................... 45

Figure 15. Time Advance Window Screen. ............................................................................................................ 46

Figure 16. Reset Window Screen. ............................................................................................................................ 46

Figure 17. Download Window Screen. ................................................................................................................... 46

Figure 18. Local GUI ERU Screen. ............................................................................................................................ 47

Figure 19. ERU PIMD Screen. ................................................................................................................................... 48

Figure 20. 700MHz ERU Band Information Screen.............................................................................................. 49

Figure 21. 850MHz ERU Band Information Screen.............................................................................................. 50

Figure 22. 1.9GHz ERU Band Information Screen. ............................................................................................... 51

Figure 23. 2.1GHz ERU Band Information Screen. ............................................................................................... 52

Figure 24. 2.3GHz ERU Band Information Screen. ............................................................................................... 53

Figure 25. 2.5GHz ERU Band Information Screen. ............................................................................................... 54

Figure 26. 2.6GHz ERU Band Information Screen. ............................................................................................... 55

INOVA DAS Operating Manual

Used Abbreviations

DAS Distributed Antenna System

EMS Element Management System

MHU Master Hub Unit

EHUB Ethernet HUB unit

ERU Ethernet Remote Unit

PSU Power Supply Unit

ERFU ERU RF Unit

SFP The Small form-Factor Pluggable

GUI Graphical User Interface

SISO Single Input Single Output

SMR Specialized Mobile Radio

TBD To Be Determined

USB Universal Serial Bus

VSWR Voltage Standing Wave Ratio

ACLR Adjacent Channel Leakage Power Ratio

ALC Auto Level Control

EVM Error Vector Magnitude

3GPP 3rd Generation Partnership Project

INOVA DAS Operating Manual

Chapter 1

Safety & Certification Notice

1.1 FCC/IC Warning Statements

1.2 Certification Notice

INOVA DAS Operating Manual

Safety & Certification Notice

1.1 FCC/IC Warning Statements

1.1.1 FCC Part 15.105 statement

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to radio communications. Operation of

this equipment in a residential area is likely to cause harmful interference in which case the user will

be required to correct the interference at his own expense.

1.1.2 FCC Part 15.21 statement

Any changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate this equipment

1.1.3 Health and Safety Warnings

- This system can be operated by approved operator only and operator should observe the warning

sentence of operating manual.

- The operator who can install, operate or handle related system service should acquaint themselves

this manual.

- Control and configuration of this system should be set up according to purpose of use (Refer to the

manufacturer’s product information), it has to be satisfied prescribed request items.

- Operator should turn off the main power switch before installing system, maintenance and related

works.

- If this product is disassembled intentionally, it can bring electric shock, breakdown, malfunction and

static with losing life and property. Do not disassemble, repair and modify product.

- This system cover should be (door) securely fastened in open position, e.g. by tying it up, at outdoor

work in order to prevent door from slamming due to wind causing bodily harm or damage.

INOVA DAS Operating Manual

- Due to power dissipation, the remote unit may reach a very high temperature. Do not operate this

equipment on or close to flammable materials. Use caution when servicing the unit.

- Use this equipment only for the purpose specified by the manufacturer. Do not carry out any

modifications or fit any spare parts, which are not sold or recommended by the manufacturer. This

could cause fires, electric shock or other injuries.

- Read and obey all the warning labels attached to the unit. Make sure that all warning labels are

kept in a legible condition.

- It is the responsibility of the network provider to implement prevention measures to avoid health

hazards associated with radiation from the antenna(s) connected to the unit.

- Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives.

- Although the remote unit is internally protected against overvoltage, it is strongly recommended to

ground (earth) the antenna cables close to the repeater’s antenna connectors for protection against

atmospheric discharge.

- Antenna(s) must be installed such that a minimum separation distance of at least 20cm is

maintained between the radiator (antenna) and all persons at all times. This device must not be co-

located or operating in conjunction with any other antenna or transmitter.

1.1.4 RSS-GEN, Sec. 7.1.2 – (transmitters)

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a

type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential

radio interference to other users, the antenna type and its gain should be so chosen that the equivalent

isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut

fonctionneravec une antenne d’un type et d’un gain maximal (ou inférieur) approuvé pour l’émetteur

par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l’intention

desautres utilisateurs, il faut choisir le type d’antenne et son gain de sorte que la puissance

isotroperayonnée quivalente (p.i.r.e.) ne dépassepas l’intensité nécessaire à l’établissement d’une

communication satisfaisante.

1.1.5 RSS-GEN, Sec. 7.1.2 – (detachable antennas)

INOVA DAS Operating Manual

This radio transmitter (identify the device by certification number, or model number if Category II)has

been approved by Industry Canada to operate with the antenna types listed below with the maximum

permissible gain and required antenna impedance for each antenna type indicated. Antenna types not

included in this list, having a gain greater than the maximum gain indicated for that type, are strictly

prohibited for use with this device.

Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de

modèle s’il fait partie du matériel de catégorie I) a été approuvé par Industrie Canada pour fonctionner

avec les types d’antenne énumérés ci-dessous et ayant un gain admissible maximal et l’impédance

requise pour chaque type d’antenne. Les types d’antenne non inclus dans cette liste,ou dont le gain est

supérieur au gain maximal indiqué, sont strictement interdits pour l’exploitation de l’émetteur.

1.1.6 RF Radiation Exposure

This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with a minimum distance of 20 cm between the

radiator and your body. This transmitter must not be co-located or operating in conjunction with any

other antenna or transmitter. RF exposure will be addressed at time of installation and the use of higher

gain antennas require larger separation distances.

L’antenne (ou les antennes) doit être installée de façon à maintenir à tout instant une distance

minimum de au moins 20 cm entre la source de radiation (l’antenne) et toute personne physique. Cet

appareil ne doit pas être installé ou utilisé en conjonction avec une autre antenne ou émetteur.

Warning

Obey all general and regional installation and safety regulations relating to work on high

voltage installations, as well as regulations covering correct use of tools and personal protective

equipment.

Warning

Use of unauthorized antennas, cables, and /or coupling devices not conforming with ERP/EIRP

and /or indoor‐only restrictions is prohibited.

INOVA DAS Operating Manual

The head end unit must always be connected to the Base Station using a direct cabled connection. This system has not been approved for use with a wireless connection via server antenna to the base station.

When external fan installed in the bottom of the enclosure operate, please keep at regular intervals to prevent danger. If you want to detach it, you must have access after operation of fan off.

WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES

and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC

License to operate this device. Unauthorized use may result in significant forfeiture penalties,

including penalties in excess of $100,000 for each continuing violation.

WARNING: This is NOT a CONSUMER device. It is designed for installation by an installer

approved by an ISED licensee. You MUST have an ISED LICENCE or the express consent of an

ISED licensee to operate this device.

Warning

Laser radiation! Do not stare into the beam; do not view it directly or with optical instruments.

Please be informed that the temperature of the surface is too high. Please be careful. The label is attached to the front of the equipment and the PSU (Power Supply Unit).

• INFORMATION TO THE USER

• [FCC] BOOSTER WARNING LABEL

• [IC] BOOSTER WARNING LABEL

• NOTICE

INOVA DAS Operating Manual

This equipment’s simple information are :

- AMP Gain : 42dB @700M, 850M / 44dB @1.9G, 2.1G / 40dB @2.3G / 43dB @2.5G, 2.6G

- Bandwidth : 28MHz @700M / 32MHz @850M / 65MHz @1.9G / 70MHz @2.1G / 10MHz @2.3G

195M @2.5G / 70MHz @2.6G

- Output Power: 21dBm @700M, 850M, 2.3G / 24dBm @1.9G, 2.1G, 2.5G, 2.6G

- Input/Output impedances : 50ohm

1.2 Certification Notice

Specification or recommendation about Antennas is not available or not mention in this manual. As

per default antennas, cables or coupling devices, contact www.frtek.com for further information.

For PLUGGABLE EQUIPMENT, the socket‐outlet shall be installed near the equipment and shall be

easily accessible.

- FCC : This equipment complies with the applicable sections of Title 47 CFR Rule Parts

- UL : This equipment complies with UL Standard for safety for information technology equipment,

including electrical business equipment.

- FDA/CDRH : This equipment uses a LASER according to FDA/CDRH Rules. This product conforms to

all applicable standards of 21 CFR Chapter 1, Subchapter J, Part 1040.

Note

RESTRICTED ACCESS LOCATION: location for equipment where both of the following apply:

- access can only be gained by SERVICE PERSIONS or by USERS who have been instructed about

the reason for the restrictions applied to the location and about any precautions that shall be

taken; and

- access is through the use of a TOOL or lock and key, or other means of security, and is controlled

INOVA DAS Operating Manual

by authority responsible for the location

- Home/ personal use are prohibited

INOVA DAS Operating Manual

Chapter 2

System Overview

2.1 System Overview

2.2 System Network Configuration

INOVA DAS Operating Manual

System Overview

2.1 System Overview

2.1.1 Overview

INOVA DAS is a system that can provide high quality telecommunication quality and data

telecommunication service both in-building and outdoor. Also, this system is a DAS (Distributed

Antenna System) system, a digital system capable of accommodating a plurality of frequency bands,

available for public and private facilities.

INOVA DAS system can be installed in:

- Shopping Malls

- Hotels

- Campus

- Airports

- Subways

- Stadiums and convention centers, etc

INOVA DAS helps improve poor telecommunication in-building/outdoor wireless environments. This

system provides telecommunication service to every corner of the building, and allows the user to use

telecommunication service regardless of the location. Also, INOVA DAS supports worldwide

telecommunication standards and public interface protocols.

System capable frequencies :

- 700MHz(LTE)

- 850MHz(CDMA, UMTS, LTE)

- 1.9GHz(UMTS, LTE)

- 2.1GHz(UMTS, LTE)

- 2.3GHz(LTE)

- 2.5GHz(TD-LTE) or 2.6GHz(LTE)

INOVA DAS is configured with standardized modules. The coverage of specific frequency band can

be ensured by mounting the unit module of the frequency. Also, since multiple signals can be

transmitted through optic cable, additional hardware modification is not needed.

INOVA DAS Operating Manual

INOVA DAS

Model Name

Type

Remark

MHU

FR-RLWFMHUUC

19” Rack type

EHUB

FR-RLWFEHUBUC

Wall mount type

ERU

FR-RLWFDL24UC

Ceiling mount type

Available for wall

mount

The main characteristics and features of INOVA DAS can be summarized as below.

• Scalability

- Supports optic fiber port.

- Star or cascade structure of network configuration is available.

- in-building or outdoor service is available.

- EMS support of remote control/monitoring for all network configured MHU, EHUB, and ERU.

• Structure

- Modular frequency upgrade.

- Plug-in type module.

• Multi-band, multi-operator support

- One ERU supports up to 6 frequency band service.

- 2.6GHz frequency band service for Canada operators available.

- Multi-operator support for one frequency band available.

• Low OPEX / CAPEX

- Miniaturized design.

- Easy installation and maintenance.

• Technology improvements

- RF direct conversion technology by applying RF 1Chip.

- Sectorization function for Alpha or Beta sector service.

- 1Gbps Ethernet telecommunication function available for various applications.

- Node Isolation function implementation to prevent service disconnection of lower node. (EHUB)

2.1.2 INOVA DAS Design Considerations

INOVA DAS is configured as below, and the model name is as the following.

INOVA DAS Operating Manual

Service Band

Remark

MHU

EHUB

ERU

700MHz

850MHz

1.9GHz

2.1GHz

2.3GHz

2.5GHz or 2.6GHz

USA : 2.5GHz support Canada : 2.6GHz support

ITEM

MHU

EHUB

ERU

Input Power

88V~132V (60Hz)

PoE++

Interface(Input)

Optic

Ethernet

Interface(Output)

Optic

Ethernet

Service Capability

CDMA, UMTS, LTE,

TD-LTE

CDMA, UMTS, LTE,

TD-LTE

CDMA, UMTS, LTE,

TD-LTE

Type

Indoor

Cascade Function

Only 4-Star @EHUB

1EA

INOVA DAS is a digital optic repeater system capable of multi-band, multi-operator, and can extend

wireless service for in-building and outdoor areas. This system can accommodate up to 6 bands. It is

designed to support 700MHz (28MHz) LTE service, 850MHz (32MHz) CDMA & UMTS & LTE service,

1.9GHz (65MHz) UMTS & LTE service, 2.1GHz (70MHz) UMTS & LTE service, 2.3GHz(10MHz) LTE service,

2.5GHz(195MHz) TD-LTE service or 2.6GHz(70MHz) LTE service.

INOVA DAS MHU is configured with MWDM, MPSU, MDRU, MBIU, each unit is connected with

Harness, RF cable, and optic cable. Each component is modularized, and can be easily

mounted/dismounted, designed for simple module replacement and maintenance. Also, each unit is

designed to withstand vibration test standard (IEC 60068-2-6:2007). The EHUB and ERU is designed for

indoor use with enclosure structure designed to block dust, pollutant and insects.

+ 41 hidden pages

FRTEK 23 25 21 24, 1900 24, 2100 24, 700 850 21 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual