Franklin U210 User Manual
1. BEFORE USING U210
A
bout This User’s Manual
This user manual contains all the necessary information regarding the device
installation and how to use the modem for your internet navigation. Please make sure
that you are familiar with the device operation by carefully reading this user manual
before using the U210 EVDO USB modem..
Instructions
• Install the Franklin Access Manager™ software by inserting the U210 USB Device into
your PC. The installation software is included in the U210 modem memory. When you
insert the U210 into your computer, the installation process will automatically begin.
• It is highly recommended that you read the safety precautions described in this
manual before using the U210.
Documents Included on your Modem Memory
• Broadband Usage Conditions, Terms & Conditions
User Manual
Product Overview
Welcome and thank you for choosing U210 USB Modem for your wireless internet
connection.
The U210 is a high-speed wireless device that enables your computer to connect to 3G
high-speed wireless network. The U210 provides simple yet powerful user interface
that is easy to install and use.
Product Package Contents
The following items are included in the product package. If any of the items listed
below are missing, please contact the local retail store where you purchased the
product.
• U210 Modem Device
• Quick Start Guide
• USB Extension Cable
• Carrying Pouch
Introduction to U210 USB Modem
The U210 is designed for the USB port on your computer, which is available in most PC
models. The U210 allows you to
A
• Access the Internet,
• Send and receive e-mail
• Access your corporate network through VPN
With U210, you are always connected whether you are away from home, on the road,
or wherever wired Internet access is not readily available.
Product Specifications
• Power management: The U210 utilizes power management and system overhead
reduction functions provided by the USB interface for maximum power savings.
• Antenna design: Its efficient and innovative design optimizes data transfer rate and
sensitivity to network signals.
• Extension USB cable connector: This extension cable may be used to increase RF
performance, and to resolve clearance issues if there is any.
• USB Modem that supports Type A USB Port interface.
• Supports PCS(1900 MHz) and Cellular (800 MHz) dual bands.
• Utilizes Qualcomm QSC6085 chipset
• Supports high-speed network technologies
• Support Windows XP, Vista, 7 and Apple Macintosh systems with installed Franklin
ccess Manager™ connection manager software and driver.
Product handling
• Do not place any adhesive labels on the USB connector. It may leave a sticky residue
that can cause problems inside the PC USB port.
• The U210 USB device should easily slide into the USB port. Do not force the U210
into the USB port as it may cause damage to the modem and/or the port.
• Keep the U210 in a dry and clean place. (Storage temperature: -22°F to 149°F [-
30°C to 65°C]). Keep your device away from liquids, dust and excessive heat.
Configuration
To use the U210 on your computer, you need to install the Franklin Access Manager™
software included in the modem memory and configure the U210 USB device. See the
next section for more information on software installation and USB device configuration.
The following section will guide you through the installation and setup process for
Franklin Access Manager™ software. Before getting started, you should become
familiar with the documentation that came with your USB Modem.
2. INSTALLATION AND SETUP FOR FRANKLIN
A
CCESS MANAGER™
A
“
This section will guide you through the installation and setup process for Franklin
ccess Manager™ software.
Before getting started, you should become familiar with the documentation that came
with your USB Modem.
Installing Software
Warnings
• Make sure to complete the unplugging/ejection process before removing the U210.
• If you remove the device improperly, the modem may be damaged.
Notes
• If you have inserted the device properly, Windows will inform you of the new
hardware. Wait until Windows completes the “Found New Hardware” task.
• In Windows 2000, several windows similar to “Found New Hardware” window can
appear and disappear automatically. In Windows XP, several tool tips similar to the
Found New Hardware” function will appear and disappear in the system tray
automatically. In Windows Vista, several tool tips similar to the “Installing device driver
software” function will appear and disappear in the system tray automatically. Once
hardware detection is complete, you will be prompted to start activation.
• It is normal to hear a short beep sound each time you insert or remove the U210.
• It is an audible notification that your PC recognizes the new hardware.
Getting Started (Windows)
To install the Franklin Access Manager™ software:
Turn on your computer then close all applications.
Insert the U210 modem into your USB port.
Your computer will recognize U210 modem and start the installation sequence
automatically. If the program does not launch automatically, go to my computer and
select the ‘FAMCD’ drive and double click ‘start.exe’ program.
Follow the steps in the next section.
Setup Program – for Windows
STEP 1
appears. Click the [Next] button to continue with the installation process.
: The “Welcome to the Franklin Access Manager Setup Wizard” screen
STEP 2
A
: You are now ready to select the location on your computer where Franklin
ccess Manager™ will be installed. It is recommended that you do not modify the
default destination folder. Click the [Next] button to continue.
STEP 3
being installed onto your computer. Installation will occur to the destination folder
specified in Step 2.
: During this step the components of Franklin Access Manager product are
STEP 4
: Installation of Franklin Access Manager is now complete. Click the [Close]
button to leave the Franklin Access Manager setup program and begin using your new
software.
• The setup program will automatically create a Franklin Access Manager shortcut on
your desktop.
STEP 5
: Please wait while U210 is installed and ready to use.
3. STARTING FRANKLIN ACCESS MANAGER™
Franklin Access Manager™ is a connection manager application for U210 USB modem.
It allows you to manage and monitor the Internet connection between your computer
and the wireless network. It has user friendly interface and is equipped with many
useful features that will enhance your internet navigation experience.
Features
WWAN(Wireless Wide Area Network, 1xEV-DO/1xRTT/CDMA)
A
A
Specific Features:
• Configures your computer to use your USB Modem
• Creates a Data Connection for your USB Modem
• Copies utility to create wireless copies of your dial-up connections, if supported by
your device
• Test function for WWAN device
A WWAN capable device is required to use the WWAN features. Individual WWAN
features are also device dependent as described in the WWAN section above.
Other Features:
• Logs connections used, duration of the usage, and bytes sent and received.
• See the section “Additional Features” for more information about the features of
Franklin Access Manager™ software.
Getting Started
Double click on the Franklin Access Manager icon on your desktop or click on the
Windows Start menu and select Franklin Access Manager from the list of programs.
bout the Wireless Networks View
Franklin Access Manager will open the Broadband Networks window as shown below.
This view is where you manage your Broadband connections. The Broadband Networks
window displays all the available network connections.
t a glance you can see the signal strength. Your current connection state and the
elapsed time of the connection are displayed along the bottom of the status bar.
Connecting to the Internet
Loading...