Franke Foodservice HDFSS1821-RM-SV User Manual
12"
(30cm)
28"
(71cm)
10"
(25cm)
19" (48cm)
16"
(40cm)
2
1" (53cm)
18"
(46cm)
3"
(8cm)
HDFSS1821-RM-SV shown
1
HDFSS1821-RM-□-□
Heavy Duty Floor Service Sink
Fixture Specification:
This Heavy Duty Floor Service Sink is designed for areas requiring the
utmost in vandal resistance. The fixture is fabricated from heavy 14 gauge
ype 304 18-10 stainless steel. It is seamlessly welded and polished to a
t
satin finish. Standard waste is a 2 3/8” OD Plain End Elbow.
Compartment Size: (FB x LR x D):
18" (46cm) x 21" (53cm) x 40" (102cm)
Bowl Size: (FB x LR x D):
16" (41cm) x 19" (48cm) x 10" (25cm)
The fixture is tested and certified to:
ASME A112.19.3-2008/CSA B45.4-08 standards.
Installation:
These fixtures are designed to be installed onto finished walls which are
serviceable from a pipe chase. Installation is achieved by threading (6) 1/2”
(13mm) diameter anchor rods to the back of the fixture. The anchor rods are
then secured on the chase side of the wall with supplied hardware. (Standard
included hardware is for walls up to 8" (20cm) thick).
For existing walls, an optional metal cutout template is available. For new
3
block (CMU) or poured concrete walls, an optional wall sleeve is available.
Available Controls:
The basin is controlled with an air-operated self closing valve with a non-hold
open feature. Flow time is adjustable from approximately 5 to 60 seconds
which has a flow rate of 2.2 gpm (8.3 lpm). The valve is operated by a vandal
resistant push button which requires less than 5lbs to operate. The valve
can be mounted up to 10 feet (3meters) away from the push button. Valve
conforms to the requirements of ASME A112.18.1-2005/CSA B125.1-05.
See basin valve options for available configurations.
2
4
Kindred Commercial Printed in Canada
CANADA
Franke Kindred Canada Limited
1000 Franke Kindred Road, Midland, Ontario, Canada L4R 4K9
email info@franke.com www.kindred-commercial.com
Telephone 1-866-687-7465 Fax 1-800-361-8408
1110 61667
FIXTUR E OVERVIEW:
Sink Spout
1
Push Button Actuator
2
2 3/8" OD Plain End Waste
3
Threaded Mounting Locations (x6)
4
Kindred Commercial Printed in Canada
1Please visit www.kindred-commercial.com for the latest specifications.
12"
(30cm)
28"
(71cm)
10"
(25cm)
19" (48cm)
16"
(40cm)
21" (53cm)
18"
(46cm)
3"
(8cm)
CHECK ONE BOX PER SECTION
Finished Floor
4"
(10cm)
17"
(43cm)
17"
(
43cm)
1
9" (48cm)
9"
(23cm)
8"
(20cm)
35"
(89cm)
4
"
(10cm)
12"
(30cm)
10"
(25cm)
ø1"
(3cm)
28"
(71cm)
HDFSS1821-RM-□-□
Heavy Duty Floor Service Sink
Standard Project Specific Options
Basin Valve
□ - SV Single Temperature Air Operated
□ - DV Hot and Cold Air Operated
Manifold Valve □ None □ - MV2 Manifold Valve to control 2 fixtures
Spout □ 2.2 gpm Spout
Waste Outlet
vailable Installation Elements (ordered separately)
A
□ 2 3/8" (6cm) OD Plain Outlet
Wall Sleeve (specify thickness) □ None □ WS-HDFSS1821-A (for walls 3 5/8" thick)
□ WS-HDFSS1821-B (for walls 5 5/8" thick)
□ WS-HDFSS1821-C (for walls 6" thick)
□ WS-HDFSS1821-D (for walls 7 5/8" thick)
□ WS-HDFSS1821-E (for walls 8" thick)
□ WS-HDFSS1821-X (for custom thickness
____________ please specify)
Metal Templates (one per project) □ None □ MT-HDFSS1821
HDFSS1821-RM-□-□
Rough-in Information
APPROVED FOR MANUFACTURE
Customer:
Name and Title (print):
Signature:
Kindred Commercial Printed in Canada
The latest rough in information is supplied with each fixture. Do not rough in without first verifying dimensions. Franke Kindred Canada reserves the right to make design and specification changes without prior
notice. Franke Kindred Canada will not assume any responsibility for the use of obsolete data. Please visit www.kindred-commercial.com for the latest specifications.
CANADA
Franke Kindred Canada Limited
1000 Franke Kindred Road, Midland, Ontario, Canada L4R 4K9
email info@franke.com www.kindred-commercial.com
Telephone 1-866-687-7465 Fax 1-800-361-8408
2
Please visit www.kindred-commercial.com for the latest specifications.
Date:
Quantity:
Model:
Sleeve or Template # (if required):
Kindred Commercial Printed in Canada
1110 61667
Loading...