Franke Foodservice HDDF1818-RM User Manual

18"

(46cm)

1"

(3cm)

18" (46cm)

4" (10cm)

11"

(28cm)

3"

(7cm)

HDDF1818-RM

HDDF1818-RM

Heavy Duty Drinking Fountain

Fixture Specification:

This Heavy Duty Drinking Fountain is designed for areas requiring the
utmost in vandal resistance. The fixture is fabricated from heavy 14 gauge

ype 304 18-10 stainless steel. It is seamlessly welded and polished to a

t
satin finish. The drinking bubbler is chrome plated lead free brass.

Compartment Size: (FB x LR x D):
18" (46cm) x 18" (46cm) x 11" (28cm)

Bowl Size: (FB x LR x D):
8 1/2" (22cm) x 14 1/4" (37cm) x 1 1/2" (4cm)

The fixture is tested and certified to:
ASME A112.19.3-2008/CSA B45.4-08 standards.

Installation:

These fixtures are designed to be installed onto finished walls which are
serviceable from a pipe chase. Installation is achieved by threading (4) 1/2”
(13mm) diameter threaded anchor rods to the back of the fixture. The
anchor rods are then secured on the chase side of the wall by supplied
hardware. (Standard included hardware is for walls up to 8" (20cm) thick).

For existing walls, an optional metal cutout template is available. For new
block (CMU) or poured concrete walls, an optional wall sleeve is available.

3

Available Controls:

The bubbler is controlled with an air-operated self closing valve with a non­hold open feature. Flow time is adjustable from approximately 5 to 60
seconds. The valve is operated by a vandal resistant push button which
requires less than 5lbs to operate. The valve can be mounted up to 10 feet
(3meters) away from the push button. Valve conforms to the requirements
of ASME A112.18.1-2005/CSA B125.1-05.

1

Kindred Commercial Printed in Canada

CANADA

Franke Kindred Canada Limited
1000 Franke Kindred Road, Midland, Ontario, Canada L4R 4K9
email [e-mail] www.kindred-commercial.com
Telephone [phone] Fax [phone]

1110 61667

FIXTURE OVERVIEW:

1

Deck Mounted Bubbler

2

Push Button Actuator

3

1.5” Waste Outlet

Kindred Commercial Printed in Canada

2

1Please visit www.kindred-commercial.com for the latest specifications.

Finished Floor

33"

(84cm)

27 1/2"

(70cm)

35 1/2"

(7cm)

16"

(

41cm)

12"

(7cm)

4"

(10cm)

26 1/2"

(67cm)

8

"

(7cm)

18"

(

46cm)

1"

(

3cm)

18" (46cm)

4" (10cm)

11"

(28cm)

3"

(7cm)

CHECK ONE BOX PER SECTION

Standard Project Specific Options

Valve □Single Temperature Air Operated Valve

Bubbler □Chrome Plated Lead Free Brass

Waste Outlet □1 1/2" (4cm) OD Plain Outlet

Available Installation Elements (ordered separately)

HDDF1818-RM

Heavy Duty Drinking Fountain

Wall Sleeve (specify thickness)

□ None □ WS-HDDF1818-A (for walls 3 5/8" thick)

□ WS-HDDF1818-B (for walls 5 5/8" thick)

□ WS-HDDF1818-C (for walls 6" thick)

□ WS-HDDF1818-D (for walls 7 5/8" thick)

□ WS-HDDF1818-E (for walls 8" thick)

□ WS-HDDF1818-X (for custom thickness

Metal Templates (one per project) □ None □ MT-HDDF1818

HDDF1818-RM
Rough-in Information

____________ please specify)

APPROVED FOR MANUFACTURE

Customer:

Name and Title (print):

Signature:

Kindred Commercial Printed in Canada

Date:

Quantity:

Model:

Sleeve or Template # (if required):

The latest rough in information is supplied with each fixture. Do not rough in without first verifying dimensions. Franke Kindred Canada reserves the right to make design and specification changes without prior
notice. Franke Kindred Canada will not assume any responsibility for the use of obsolete data. Please visit www.kindred-commercial.com for the latest specifications.

CANADA

Franke Kindred Canada Limited
1000 Franke Kindred Road, Midland, Ontario, Canada L4R 4K9
email [e-mail] www.kindred-commercial.com
Telephone [phone] Fax [phone]

2

Please visit www.kindred-commercial.com for the latest specifications.

Kindred Commercial Printed in Canada

1110 61667