Franke Foodservice HDDF1818-FM User Manual
18"
(46cm)
1"
(3cm)
18" (46cm)
4" (10cm)
13"
(33cm)
9"
(23cm)
HDDF1818-FM
HDDF1818-FM
Heavy Duty Drinking Fountain
Fixture Specification:
This Heavy Duty Drinking Fountain is designed for areas requiring the
utmost in vandal resistance. The fixture is fabricated from heavy 14 gauge
ype 304 18-10 stainless steel. It is seamlessly welded and polished to a
t
satin finish. The drinking bubbler is chrome plated lead free brass.
Compartment Size: (FB x LR x D):
18" (46cm) x 18" (46cm) x 13" (33cm)
Bowl Size: (FB x LR x D):
8 1/2" (22cm) x 14 1/2" (37cm) x 1 1/2" (4cm)
The fixture is tested and certified to:
ASME A112.19.3-2008/CSA B45.4-08 standards.
Installation:
These fixtures are designed to be installed onto finished walls which are not
accessible from a pipe chase. Installation is achieved by means of a wall
hanger bracket and lower mounting holes. Mounting hardware and plumbing
are all self contained and only accessed by a removable panel. The panel is
secured with tamper resistant screws.
Available Controls:
The bubbler is controlled with an air-operated self closing valve with a nonhold open feature. Flow time is adjustable from approximately 5 to 60
seconds. The valve is operated by a vandal resistant push button which
requires less than 5lbs to operate. The valve can be mounted up to 10 feet
5
3
(3meters) away from the push button. Valve conforms to the requirements
of ASME A112.18.1-2005/CSA B125.1-05.
1
2
Kindred Commercial Printed in Canada
CANADA
Franke Kindred Canada Limited
1000 Franke Kindred Road, Midland, Ontario, Canada L4R 4K9
email info@franke.com www.kindred-commercial.com
Telephone 1-866-687-7465 Fax 1-800-361-8408
1110 61667
4
FIXTURE OVERVIEW:
1
Deck Mounted Bubbler
2
Push Button Actuator
3
1.5” P Trap
4
Removable Panel
5
Wall Hanger Bracket
Kindred Commercial Printed in Canada
1Please visit www.kindred-commercial.com for the latest specifications.
18"
(46cm)
1"
(3cm)
18" (46cm)
4" (10cm)
13"
(33cm)
9"
(23cm)
CHECK ONE BOX PER SECTION
As Required
17"
(46cm)
3 3/4"
(10cm)
8 1/2"
(22cm)
3 3/4"
(10cm)
Finished Floor
Standard Project Specific Options
Valve □Single Temperature Air Operated Valve
Bubbler □Chrome Plated Lead Free Brass
Waste Outlet □1 1/2" (4cm) Removable P-trap
Installation
□ On Wall
Wall Hanger Bracket and lower mounting
holes (wall hardware supplied by others)
HDDF1818-FM-□-□-□
Rough-in Information
HDDF1818-FM
Heavy Duty Drinking Fountain
Kindred Commercial Printed in Canada
APPROVED FOR MANUFACTURE
Customer:
Name and Title (print):
Signature:
Date:
The latest rough in information is supplied with each fixture. Do not rough in without first verifying dimensions. Franke Kindred Canada reserves the right to make design and specification changes without prior
notice. Franke Kindred Canada will not assume any responsibility for the use of obsolete data. Please visit www.kindred-commercial.com for the latest specifications.
Quantity:
Model:
CANADA
Franke Kindred Canada Limited
1000 Franke Kindred Road, Midland, Ontario, Canada L4R 4K9
email info@franke.com www.kindred-commercial.com
Telephone 1-866-687-7465 Fax 1-800-361-8408
2
Please visit www.kindred-commercial.com for the latest specifications.
1110 61667
Kindred Commercial Printed in Canada
Loading...