Franke Foodservice FTU 3807 WXS 70H Installation Manual
Instructions for use and installation
Cooker Hood
FTU 3807 WXS 70H
FTU 3807-P WXS 70H
EN
Instructions Manual
INDEX
RECOMMENDATIONS AND SUGGESTIONS....................................................................................................................18
CHARACTERISTICS............................................................................................................................................................19
INSTALLATION ....................................................................................................................................................................20
USE.......................................................................................................................................................................................24
MAINTENANCE....................................................................................................................................................................25
3
3
EN 118
RECOMMENDATIONS AND SUGGESTIONS
550 mm min.
The Instructions for Use apply to several versions of this appliance. Accordingly, you
may find descriptions of indi vidual feat ures t hat do not apply t o your specif ic appli ance.
INSTALLATION
• The manufacture r will not be held liab le for any damages resultin g from incorrect or
improper installation.
• The minimum safety distance between the cooker top and the extractor hood is 550
mm.
• Check that the mains voltage corresponds to that indicated on the rating plate fixed to
the inside of the hood.
• For Class I appliances, check that the domestic power supply guarantees adequate
earthing.
Connect the extractor to the exhaust flue through a pipe of minimum diameter 120 mm.
The route of the flue must be as short as possi ble.
• Do not connect the extractor hood to exhaust ducts carrying combustion fumes (boilers, fireplaces, etc.).
• If the extractor is used in conjunction with non-electrical appliances (e.g. gas burning
appliances), a sufficient degree of aeration must be guaranteed in the room in order to
prevent the backflow of exhaust gas. The kitchen must have an opening communicating directly with the open air i n order to guaran t ee the ent ry of cl ean ai r.
USE
• The extractor hood has been designed exclusively for domestic use to eliminate
kitchen smells.
• Never use the hood for purposes other t han fo r w hich it has ben designed.
• Never leave high naked flames under t he hood w hen it is in oper ati on.
• Adjust the flame intensity to direct it onto the bott om of the pan only, making sure that it
does not engulf the sides.
• Deep fat fryers must be continuously monitored during use: overheated oil can burst
into flames.
• Do not flambè under the range hood; risk of fire
• This appliance is not intended for use by persons (including children) with reduced
physical, se nsory o r menta l capabilit ies, or lack of e xperie nce and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safet y.
• Children should be supervised to ensure that they do not play with the appliance.
MAINTENANCE
• Switch off or unplug the appli ance from the mains supply before carrying out any maintenance work.
• Clean and/or replace the Fil ters af ter the speci fi ed time peri od.
• Clean the hood using a damp cloth and a neutral liquid detergent.
The symbol on the product or on its packaging indicates that this product may not be treated as
household waste. Instead it shall be handed over to the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. For more detailed information about recycling of
this product, please contact your local city office, your household waste disposal service or the shop
where you purchased the product.
EN 119
CHARACTERISTICS
Dimensions
Components
Ref. Q.ty Product components
1 1 Hood equipped with: Controls, Lights, Filters
3 1 Hood support equipped with the Exhaust Group
7 1 tube in PVC
8 1 Directioned grid
8c 1 Air outlet red uction ø 120mm
9 1 Reduction flange ø 150-120 mm
Ref. Q.ty Installation components
11 4 Small blocks ø 10
12a 4 Screws 5 x 70
12b 4 Screws M4 x 15
12e 2 Screws 2,9 x 9, 5
13 4 Screws plug M4
Q.ty Documentations
1 Instruction booklet
12e
8
13
7
9
12b
1
8c
11
12a
3
Loading...