Foxconn 600A01 series User Manual
This manual is the intellectual property of Foxconn, Inc. Although the
information in this manual may be changed or modified at any time,
Foxconn does not obligate itself to inform the user of these changes.
Statement:
All trademarks are the property of their respective owners.
Intel® and Pentium® are registered trademarks of Intel Corporation.
PS/2 and OS/2 is the registered trademarks of IBM, Inc.
Windows
®
95/98/2000/NT/XP is the registered trademark of Microsoft.
Award
®
is the registered trademark of Award, Inc.
User’s Manual V1.0 in English for 600A01 series motherboard.
P/N:91-181-600-10-00
Symbol description:
Note: refers to important information that can help you to use motherboard
better.
Attention: indicates that it may damage hardware or cause data loss,
and tells you how to avoid such problems.
Warning: means that a potential risk of property damage or physical
injury exists.
More information:
If you want more information about our products, please visit Foxconn’s
website: www.foxconnchannel.com
Version:
Trademark:
600M01-English preface.p65 2004-4-12, 13:331
Item Checklist:
Thank for your purchasing Foxconn’s 600A01 series motherboard. Please check
the package; if there are missing or damaged items, contact your distributor as
soon as possible.
600A01 Series Motherboard (x1)
Foxconn Utility CD (x1)
User’s Manual (x1)
600A01 Flyer (x1)
IDE Ribbon Cable (x1)
FDD Ribbon Cable (x1)
I/O Shield (x1)
SPDIF Cable (x1) (optional)
USB 2.0 Cable (x1) (optional)
S-ATA Signal Cable (x1) (optional)
S-ATA Power Cable (x1) (optional)
Serial ATA RAID Floppy Disk (x1) (optional)
600M01-English preface.p65 2004-4-12, 13:332
Declaration of conformity
HON HAI PRECISION INDUSTRY COMPANY LTD
66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT,
TAIPEI HSIEN, TAIWAN, R.O.C.
declares that the product
Motherboard
600A01 series
is in conformity with
(reference to the specification under which conformity is declared in
accordance with 89/336 EEC-EMC Directive)
EN 55022/A1: 2000 Limits and methods of measurements of radio disturbance
characteristics of information technology equipment
EN 61000-3-2/A14:2000 Electromagnetic compatibility (EMC)
Part 3: Limits
Section 2: Limits for harmonic current emissions
(equipment input current <= 16A per phase)
EN 61000-3-3/A1:2001 Electromagnetic compatibility (EMC)
Part 3: Limits
Section 2: Limits of voltage fluctuations and flicker in low-voltage
supply systems for equipment with rated current <= 16A
EN 55024/A1:2001 Information technology equipment-Immunity characteristics limits
and methods of measurement
Signature : Place / Date : TAIPEI/2004
Printed Name : James Liang Position/ Title : Assistant President
600M01-English preface.p65 2004-4-12, 13:333
Declaration of conformity
Trade Name: Foxconn
Model Name:
600A01
Responsible Party: PCE Industry Inc.
Address: 458 E. Lambert Rd.
Fullerton, CA 92835
Telephone: 714-738-8868
Facsimile: 714-738-8838
Equipment Classification: FCC Class B Subassembly
Type of Product: Motherboard
Manufacturer: HON HAI PRECISION INDUSTRY
COMPANY LTD
Address: 66 , CHUNG SHAN RD., TU-CHENG
INDUSTRIAL DISTRICT, TAIPEI HSIEN,
TAIWAN, R.O.C.
Supplementary Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions : (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Tested to comply with FCC standards.
Signature : Date : 2004
600M01-English preface.p65 2004-4-12, 13:334
Product Introduction
Main Features .............................................................................................. 2
Motherboard Layout .................................................................................... 5
Installation Instructions
CPU .............................................................................................................11
Memory ...................................................................................................... 13
Power Supply ............................................................................................ 16
Rear Panel Connectors .............................................................................. 17
Other Connectors ...................................................................................... 19
Expansion Slots ......................................................................................... 27
Jumpers ..................................................................................................... 30
BIOS Description
Enter BIOS Setup ....................................................................................... 34
Main Menu ................................................................................................. 34
Standard CMOS Features .......................................................................... 36
BIOS Features ........................................................................................... 39
Advanced BIOS Features .......................................................................... 40
Advanced Chipset Features ...................................................................... 43
Integrated Peripherals ................................................................................ 48
Power Management Setup ......................................................................... 52
PnP/PCI Configurations ............................................................................... 58
PC Health Status ........................................................................................ 60
Frequency/Voltage Control ......................................................................... 61
Load Fail-Safe Defaults ............................................................................. 62
Load Optimized Defaults ............................................................................ 62
Set Supervisor/User Password ................................................................. 62
Save & Exit Setup ...................................................................................... 63
Exit Without Saving .................................................................................... 63
Table of Contents
Chapter 1
Chapter 2
Chapter
3
600M01-English preface.p65 2004-4-12, 13:335
6
Driver CD Introduction
Utility CD content ........................................................................................ 65
Start to install drivers ................................................................................. 66
Install VIA 4in1 Driver ................................................................................. 66
Install DirectX 9.0b ..................................................................................... 68
Install VIA RAID (optional) .......................................................................... 69
Install USB 2.0 Driver ................................................................................. 70
Using 6-Channel Audio ............................................................................... 70
Install LAN Driver ....................................................................................... 74
Install IR Driver ........................................................................................... 75
Install Norton Internet Security 2004 .......................................................... 76
Directions for Bundled Software
SuperStep ................................................................................................. 78
SuperLogo ................................................................................................. 81
SuperUpdate .............................................................................................. 83
Special BIOS Functions
SuperSpeed ............................................................................................... 89
SuperBoot ................................................................................................. 90
SuperBIOS-Protect .................................................................................... 91
SuperRecovery ......................................................................................... 92
Appendix
Using Serial ATA RAID (optional) .............................................................. 101
Table of Contents
4
5
Chapter
Chapter
Chapter
600M01-English preface.p65 2004-4-12, 13:336
1. Attach the CPU and heatsink using silica gel to ensure full contact.
2. It is suggested to select high-quality, certified fans in order to avoid
damage to the motherboard and CPU due to high temperatures.
3. Never turn on the machine if the CPU fan is not properly installed.
4. Ensure that the DC power supply is turned off before inserting or
removing expansion cards or other peripherals, especially when
you insert or remove a memory module. Failure to switch off the DC
power supply may result in serious damage to your system or
memory module.
Warning:
We cannot guarantee that your system will operate normally while
over-clocked. Normal operation depends on the over-clock capacity of
your device.
Warning:
Attention:
Since BIOS programs are upgraded from time to time, the BIOS de-
scription in this manual is just for reference. We do not guarantee that
the content of this manual will remain consistent with the actual BIOS
version at any given time in the future.
Attention:
The pictures of objects used in this manual are just for your reference.
Please refer to the physical motherboard.
600M01-English preface.p65 2004-4-12, 13:337
This page is intentionally left blank.
600M01-English preface.p65 2004-4-12, 13:338
Chapter
Thank you for your buying Foxconn’s 600A01 series
motherboard. This series of motherboard is one of our new
products and offers superior performance, reliability and
quality, at a reasonable price. This motherboard adopts the
advanced VIA KT600 +
VT8237 chipset, providing users a
computer platform with a high integration-compatibility-per-
formance price ratio.
This chapter includes the following information:
Main Features
Motherboard Layout
1
1
600A01-FOXCONN-V1.0-HW-en.p65 2004-4-12, 13:291
Chapter 1 Product Introduction
2
600A01 Series User Manual
Main Features
Size
ATX form factor of 12”x 8.1”
Microprocessor
Supports AMD socket 462 K7, DuronTM, AthlonTM, AthlonTM XP processors
Supports FSB at 200MHz/266MHz/333MHz/400MHz
Chipset
VIA chipset: KT600 (North Bridge)+VT8237 (South Bridge)
System Memory
Three 184-pin DIMM slots
Supports PC2100/PC2700/PC3200 memory
Supports 128/256/512 Mb technology up to 3GB
Onboard IDE
Supports up to 4 independent drives
Supports Ultra DMA 133/100/66/33
Two fast IDE interfaces supporting four IDE devices, including IDE hard disk
and CD-ROM/DVD-ROM drives
Onboard Serial ATA (optional)
150MB/s transfer rate
Supports two S-ATA devices
Supports Raid0, Raid1 and JBOD
USB 2.0 Ports
Supports hot plug
Eight USB 2.0 ports (four rear panel ports, two onboard USB headers provid-
ing four extra ports)
Supports wake-up from S1 and S3 mode
Supports USB 2.0 protocol up to 480 Mbps transmission rate
600A01-FOXCONN-V1.0-HW-en.p65 2004-4-12, 13:292
3
600A01 Series User Manual
Chapter 1 Product Introduction
Onboard 1394 (optional)
Supports hot plug
With rate of transmission up to 400Mbps
Self-configured addressing
Can connect with 2 independent 1394 units synchronously at most, such
as HDD, CD-ROM
Onboard LAN
VIA VT6103L 10/100Mbps Ethernet PHY
LAN interface built-in on board
Onboard Audio
AC’ 97 2.2 Specification Compliant
Supports 48KHz of S/PDIF output
Onboard Line-in jack, Microphone jack, Line-out jack
Supports 5.1 channels audio (setting via software)
AGP 8X support
AGP 8X (AGP 3.0) is the VGA interface specification that enabled enhanced
graphics performance with high handwidth speeds up to 2.12 GB/s
Expansion Slots
Five PCI slots
One AGP slot
One CNR slot (optional)
BIOS
Licensed advanced AWARD (Phoenix) BIOS, supports flash ROM, plug-
and-play ready
Supports HDD, CD-ROM, SCSI HDD, LAN or USB device boot up
600A01-FOXCONN-V1.0-HW-en.p65 2004-4-12, 13:293
Chapter 1 Product Introduction
4
600A01 Series User Manual
Green Function
Supports ACPI (Advanced Configuration and Power Interface)
Supports S0 (normal), S1 (power on suspend), S3 (suspend to RAM), S4
(suspend to disk – depends on OS) and S5 (soft-off)
Advanced Features
PCI 2.2 Specification Compliant
Supports Windows 98/ME/2000/XP soft-off
Supports Wake-on-LAN, Wake-on-Modem
Supports PC Health function (capable of monitoring system voltage, CPU
temperature, system temperature and fan speed)
600A01-FOXCONN-V1.0-HW-en.p65 2004-4-12, 13:294
5
600A01 Series User Manual
Chapter 1 Product Introduction
Motherboard Layout
Note:
The above motherboard layout is provided for reference only;
please refer to the physical motherboard.
3
4
5
6
8
15
12
11
10
13
14
2
7
9
1
16
600A01-FOXCONN-V1.0-HW-en.p65 2004-4-12, 13:295
Chapter 1 Product Introduction
6
600A01 Series User Manual
Super I/O controller
The VIA VT1211 I/O controller offers support for a variety of I/O function.
Provides a high-performance floppy disk controller for a 360K/720K/1.44M/
2.88M floppy disk drive, a multi-mode parallel port, two serial ports, and
a Flash ROM interface.
ATX power connector
This 20-pin connector connects to an ATX power supply. The power supply
must have at least 1A on the +5V standby lead (+5VSB).
AGP slot
This Accelerated Graphics Port (AGP) slot supports 1.5V AGP 8X/4X mode
graphics cards for 3D graphical applications.
CPU socket
Socket 462 (socket A)
Zero Insertion Force (ZIF) for the AMD processor,
with 200/266/333/400MHz system bus.
North Bridge controller
The VIA KT600 controller integrates a high performance host interface for
the AMD processor, a DDR memory controller, and support AGP 8X
technology.
DDR DIMM sockets
These three 184-pin DIMM sockets support up to 3GB system memory
using unbuffered non-ECC PC2100/PC2700/PC3200 DDR DIMMs.
South Bridge controller
The VIA VT8237 integrated peripheral South Bridge controller communicates
with the North Bridge at the rates of up to 533MB/s using the VIA 8X VLink
technology. This controller supports standard UltraATA 133/100/66/33 and
provides separate data paths for each IDE channel for up to two IDE devices.
This controller also integrates SATA RAID controller, Ethernet MAC, Universal
Serial Bus Host controller.
Serial ATA connectors (optional)
These connectors support Serial ATA HDDs and allow for up to 150MB/s
data transfer rate, faster than the standard Parallel ATA with 133MB/s.
3
4
1
2
5
6
7
8
600A01-FOXCONN-V1.0-HW-en.p65 2004-4-12, 13:296
7
600A01 Series User Manual
Chapter 1 Product Introduction
IDE connectors
These dual-channel bus master IDE connectors support Ultra DMA 133/
100/66/33 devices. Both the primary (blue) and secondary (white)
connectors are slotted to prevent incorrect insertion of the IDE ribbon cable.
Floppy disk connector
This connector accommodates the provided ribbon cable for the floppy disk
drive. One side of the connector is slotted to prevent incorrect insertion of
the floppy disk cable.
PCI slots
These five 32-bit PCI 2.2 expansion slots support bus master PCI cards
like SCSI or LAN cards with 133MB/s maximum throughput.
CNR slot (optional)
This slot is specifically designed for the Communication and Networking
Riser (CNR) card. The CNR supports V.90 analog modem only.
Flash Rom
This 4Mb firmware contains the programmable BIOS program.
Audio CODEC
The VIA VT1616 provides 6-channel outputs fully supporting surround sound
applications, along with 4 stereo and 2 mono inputs. Supporting the AC’97
2.2 specification, the VIA VT1616 enables 20-bit resolution, and a variable
sampling rate with 1Hz resolution.
1394 controller (optional)
VT6307 is the controller for IEEE1394a on motherboard. The VT6307 is a
complete small package single chip PCI solution at 400Mbps, low power
seamless plug and play connections to the latest IEEE 1394 enabled
devices.
10/100M LAN PHY
The VT6103L is a single-port PHY transceiver with an MII (Media
Independent Interface) and supports 10/100 Mbps data transfer rate.
9
10
11
12
13
14
16
15
600A01-FOXCONN-V1.0-HW-en.p65 2004-4-12, 13:297
Chapter 2 Installation Instructions
8
600A01 Series User Manual
This chapter introduces the hardware installation process,
including the installation of the CPU and memory. It also
addresses the connection of your power supply, use of the
rear panel connectors, connection of hard drive and floppy
drive data cables, and setting up various other feature of the
motherboard. Caution should be exercised during the in-
stallation process. Please refer to the motherboard lay-
out prior to any installation and read the contents in this
chapter carefully.
This chapter includes the following information:
CPU
Memory
Power Supply
Rear Panel Connectors
Other Connectors
Expansion Slots
Jumpers
Chapter
2
2
600A01-FOXCONN-V1.0-HW-en.p65 2004-4-12, 13:298
9
600A01 Series User Manual
Chapter 2 Installation Instructions
Notes:
Take note of the following precautions before you install compo-
nents or change settings.
1. Use a grounded wrist strap or touch a safely grounded object,
such as an attached power supply, before handling compo-
nents to avoid damaging them due to static electricity.
2. Unplug the power cord before opening your chassis or touching
any component.
3. Hold components by their edges to avoid touching any exposed
integrated circuits (ICs).
4. Whenever you uninstall a component, place it on a grounded
anti-static pad or into anti-static bag that it came in.
600A01-FOXCONN-V1.0-HW-en.p65 2004-4-12, 13:299
Chapter 2 Installation Instructions
10
600A01 Series User Manual
CPU
This motherboard accepts socket 462 processors (CPUs) with a front side bus
(FSB) of 200/266/333/400MHz.
Installation of CPU
Follow these steps to install a CPU.
1. Unlock the socket by pressing the
lever sideways, then lift it up to a 90
0
angle.
2. Align the cut edge to the gap in the
base of the socket. Carefully insert
the CPU into the socket until it fits in
place.
3. When the CPU is in place, press it
firmly on the socket while you push
down the socket lever to secure the
CPU. The lever clicks on the side
tab to indicate that it is locked.
Cut edge
90°
Gap in the base
Push down the socket
lever to secure the CPU
Warning :
The CPU pins must be properly aligned with the holes in the
socket, otherwise the CPU may be damaged.
600A01-FOXCONN-V1.0-HW-en.p65 2004-4-12, 13:2910
11
600A01 Series User Manual
Chapter 2 Installation Instructions
Warning :
Excessive temperatures will severely damage the CPU and
system. Therefore, make sure that the cooling fan works normally
at all times in order to prevent overheating and damaging to the
CPU.
1. Locate the CPU retention mechanism
base (surrounds the CPU socket).
3. Attach the fan to the base.
Installation of CPU Fan
New technology allows processors to run at higher and higher frequencies. To
avoid problems arising from high-speed operation, for example, overheating, you
need to install the proper fan. The following procedures are provided for refer-
ence only, please refer to your CPU fan user guide to install it.
2. If required, apply a light coating
of silica gel to the top of the CPU.
Note: The CPU heatsink may have a
pre-applied thermal compound. In that
case, the silica gel is not required.
4. Connect the power fan’s power
cable to the appropriate 3-pin
connector on the motherboard.
600A01-FOXCONN-V1.0-HW-en.p65 2004-4-12, 13:3011
Chapter 2 Installation Instructions
12
600A01 Series User Manual
CPU Qualified Vendor List
The following table lists the CPU modules that have been tested and qualified
for use with this motherboard.
Vendor Type FSB
AMD Athlon3200+ 400MHz
AMD Athlon3000+ 333MHz
AMD Athlon2800+ 333MHz
AMD Athlon2600+ 333MHz
AMD Athlon2500+ 333MHz
AMD Athlon2400+ 266MHz
AMD Athlon2200+ 266MHz
AMD Athlon1700+ 266MHz
600A01-FOXCONN-V1.0-HW-en.p65 2004-4-12, 13:3012
13
600A01 Series User Manual
Chapter 2 Installation Instructions
Memory
This motherboard includes three, 184-pin, dual in-line memory module (DIMM)
sockets. You can install corresponding PC3200 (DDR400), PC2700
(DDR333), PC2100 (DDR266) memory modules. You must install at least
one memory module to ensure normal operation. If you install two modules,
they must be the same speed. Mixing memory modules from different
manufacturers is not recommended.
DIMM1
DIMM2
DIMM3
600A01-FOXCONN-V1.0-HW-en.p65 2004-4-12, 13:3013
Chapter 2 Installation Instructions
14
600A01 Series User Manual
Vender Type Size
Transcend PC3200 (DDR 400) 512MB
MT PC2700 (DDR 333) 256MB
KingMax PC2100 (DDR 266) 256MB
TwinMos PC3200 (DDR 400) 512MB
KingMax PC2700 (DDR 333) 256MB
ADATA PC2700 (DDR 333) 256MB
Samsung PC3200 (DDR 400) 256MB
Rambo PC3200 (DDR 400) 256MB
Hynix PC3200 (DDR 400) 256MB
Hynix PC2700 (DDR 333) 256MB
Rambo PC2700 (DDR 333) 512MB
Hynix PC2100 (DDR 266) 256MB
MT PC3200 (DDR 400) 256MB
MT PC3200 (DDR 400) 512MB
Nanya PC2100 (DDR266) 512MB
Kingston PC3200 (DDR 400) 512MB
Note:
Make sure to use only the tested and qualified DDR DIMMs
listed above. Other DDR DIMMs manufactured by other ven-
dors may not be suitable for this motherboard.
Memory Qualified Vendor List
600A01-FOXCONN-V1.0-HW-en.p65 2004-4-12, 13:3014
15
600A01 Series User Manual
Chapter 2 Installation Instructions
Installation of DDR Memory
1. There is only one gap in the center of the DIMM socket, and the memory
module can be fixed in one direction only. Unlock a DIMM socket by
pressing the module clips outward.
2. Align the memory module to the DIMM socket and insert the module verti-
cally into the DIMM socket.
3. The plastic clips at both sides of the DIMM socket will lock automatically.
104
Pins
80
Pins
Warning :
Be sure to unplug the AC power supply before adding or remov-
ing expansion cards or other system peripherals, especially the
memory devices, otherwise your motherboard or the system
memory might be seriously damaged.
600A01-FOXCONN-V1.0-HW-en.p65 2004-4-12, 13:3015
Chapter 2 Installation Instructions
16
600A01 Series User Manual
Power Supply
This motherboard uses an ATX power supply. In order to avoid damaging any
devices, make sure that they have been installed properly prior to connecting
the power supply.
20-pin ATX power connector: PWR1
PWR1 is the ATX power supply connector. Make sure that the power supply
cable and pins are properly aligned with the connector on the motherboard.
Firmly plug the power supply cable into the connector and make sure it is secure.
Attention:
You have to press the power button for more than four seconds if
you change the default “Instant-Off” setting to “Delay 4 Sec.” from
the “Soft-Off by PWRBTN” option in the BIOS “Power Manage-
ment Setup”.
20-pin ATX power connector
1
11
-12V_SYS
Ground
NC 5V_SYS Ground
Ground
PS-ON
Ground 5V_SYS
10
20
12V_SYS
Ground
Power OK
3D3V_SYS
5V_SB
3D3V_SYS
3D3V_SYS
Ground
Ground
5V_SYS 5V_SYS
600A01-FOXCONN-V1.0-HW-en.p65 2004-4-12, 13:3016
17
600A01 Series User Manual
Chapter 2 Installation Instructions
Rear Panel Connectors
This motherboard provides the ports as below:
PS/2 Mouse Connector
This green 6-pin connector is for a PS/2 mouse.
PS/2 Keyboard Connector
This purple 6-pin connector is for a PS/2 keyboard.
Serial Port (COM1)
This 9-pin COM1 port is for pointing devices or other serial devices.
Parallel Port (Printer Port)
This 25-pin port connects a parallel printer, a scanner, or other devices.
Serial Port (COM2)
This 9-pin COM2 port is for pointing devices or other serial devices.
USB 2.0 Ports
These four Universal Serial Bus (USB) ports are available for connecting USB
2.0/1.1 devices.
1394 Port (optional)
This digital interface supports electronic devices such as digital cameras,
scanners and printers.
1
2
3
5
4
6
7
Serial Port
(COM1)
Serial Port
(COM2)
USB 2.0 Port x 4
PS/2 Mouse
Connector
Parallel Port
(Printer Port)
LAN Connector
Line-in jack
Line-out jack
Microphone
jack
1
2
3
4
6
5
8
9
1394 Port
(optional)
7
PS/2 Keyboard
Connector
600A01-FOXCONN-V1.0-HW-en.p65 2004-4-12, 13:3017
Chapter 2 Installation Instructions
18
600A01 Series User Manual
LAN Connector
This port allows connection to a Local Area Network (LAN) through a network
hub.
Line-in jack, Line-out jack, Microphone jack
The Line-in jack connects a tape player or other audio sources. In 6-Channel
mode, the function of this jack becomes Rear Speaker Out.
The Line-out jack connects a headphone or a speaker. In 6-Channel mode, the
function of this jack becomes Front Speaker Out.
The Microphone jack connects a microphone. In 6-Channel mode, the function
of this jack becomes Center/Subwoofer Speaker.
8
9
600A01-FOXCONN-V1.0-HW-en.p65 2004-4-12, 13:3018
19
600A01 Series User Manual
Chapter 2 Installation Instructions
Other Connectors
This motherboard includes connectors for FDD, IDE HDD, USB, CPU fan, system
fan, and others.
FDD Connector: FLOPPY
This motherboard includes a standard FDD connector, supporting 360K, 720K,
1.2M, 1.44M and 2.88M FDDs.
HDD Connectors: PIDE & SIDE
The connectors support the provided UltraDMA 133/100/66/33 IDE hard disk
ribbon cable. Connect the cable’s blue connector to the primary
(recommended) or secondary IDE connector, then connect the gray connec-
tor to the Ultra DMA 133/100/66/33 slave device (hard disk drive) and the black
connector to the Ultra DMA 133/100/66/33 master device. If you install two hard
disks, you must configure the second drive as a slave device by setting its
jumper accordingly. Refer to the hard disk documentation for the jumper
settings.
Attention:
Ribbon cables are directional, therefore, make sure to always
connect with the cable on the same side as pin 1 of the PIDE/
SIDE or FDD connector on the motherboard.
FDD connector
1
600A01-FOXCONN-V1.0-HW-en.p65 2004-4-12, 13:3019
Chapter 2 Installation Instructions
20
600A01 Series User Manual
PIDE SIDE
Front Panel Connector: FP1
This motherboard includes one connector for connecting the front panel switch
and LED indicators.
Hard Disk LED Connector (IDE_LED)
The connector connects to the case’s IDE indicator LED indicating the activity
status of hard disk.
Reset Switch (RESET)
Attach the connector to the Reset switch on the front panel of the case; the
system will restart when the switch is pressed.
Power LED Connector (PLED)
Attach the connector to the power LED on the front panel of the case. The Power
LED indicates the system’s status. When the system is in S0 status, the LED is
on. When the system is in S1 status, the LED is blink. When the system is in S3,
S4, S5 status, the LED is off.
1
FP1
1 +
-
NC
IDE_LED
RESET
PLED
PWRBTN#
+
-
600A01-FOXCONN-V1.0-HW-en.p65 2004-4-12, 13:3020
21
600A01 Series User Manual
Chapter 2 Installation Instructions
IrDA Header: IR
This connector supports wireless transmitting and receiving device. Before using
this function, set the item “Onboard Fast IR” to enabled from the “Integrated
Peripherals” section of the CMOS Setup. Then install IR driver to make sure this
function takes effect.
Fan Connectors : CPU_FAN, FAN1
The speed of CPU_FAN and FAN1 can be detected and viewed in “PC Health
Status” section of the CMOS Setup.
FAN1
CPU_FAN
1
IR
+5V
Ground
RX
TX
Empty
1
GND
SENSE
+12V
GND
SENSE
+12V
1
600A01-FOXCONN-V1.0-HW-en.p65 2004-4-12, 13:3021
Chapter 2 Installation Instructions
22
600A01 Series User Manual
USB Headers: F_USB1, F_USB2
Besides four USB ports on the rear panel, the series of motherboards also have
two 10-pin headers on board which may connect to front panel USB cable
(optional) to provide additional four USB ports. The USB headers complies with
USB 2.0 specification that supports up to 480 Mbps connection speed.
Note:
1. You must install the driver before you can use the USB 2.0
function.
2. NEVER connect a 1394 cable to the F_USB1 or F_USB2
connector. Doing so will damage the motherboard!
3. The USB cable is an optional item.
F_USB1
VCC
D4+
D4-
Empty
GND
GND
D0+
D0-
GND
VCC
1
F_USB2
VCC
D6+
D6-
Empty
GND
GND
D7+
D7-
GND
VCC
1
600A01-FOXCONN-V1.0-HW-en.p65 2004-4-12, 13:3022
Loading...