Fortinet 26155055 User Manual

FortiAP S322CR

Information

Box Includes

Box Includes

FortiAP S322CR

Mounting Screws (8) & Bolts (4)

1 2

Information Supplement

Pole Mount Bracket

Wall Mount Bracket

Pole Mount Strap

Grounding Screw

Surge Protector

PoE Injector

Waterproof Connector

Power Adapter

3 Grounding Cables

5GHz Antenna (3)

Box Includes

2.4GHz Antenna (3)

Installation

IMPORTANT NOTE: The device must be professionally installed and must use the supplied

antennas.

The unit is designed for outdoor use and may be attached to either a pole or wall. A waterproof
connector is supplied to ensure a watertight seal for connecting the Ethernet cable to the device.

Note: The device can be mounted either outdoors or indoors. The included PoE injector and surge

protector must be mounted indoors, as they are not weatherproof.

To mount the device on a wall

1. Using the wall-mount base as a template, mark the location of the mounting bolt holes on a flat
wall surface.

2. Drill the mounting holes in the marked locations.

3. Fasten the wall-mount base securely to the back of the unit using the provided mounting

3 4

screws.

To mount the FortiAP unit on a pole

1. Fasten the wall-mount base securely to the back of the unit using the provided mounting screws.

4. Attach the unit and base assembly to the
wall using the provided mounting bolts.

5. Securely tighten the mounting bolts.

5 6

2. Attach the pole-mount bracket to the wall-mount base using with the provided screws.

The pole-mount bracket can be attached either vertically or horizontally, as required.

3. Loop the provided pole strap through the slots
on the pole-mount bracket and then around
the pole.

4. Tighten the strap with an appropriate screw
driver and ensure that the device is firmly in
place.

5GHz2.4GHz 2.4GHz

Antennas

The FortiAP S322CR unit provides dual concurrent radio
signals. Use the 2.4GHz antennas to access Radio 1
(802.11 b/g/n at 300Mbps) signals, and the 5GHz
antennas to access Radio 2 (802.11 a/n/c at 867Mbps)
signals. To use both radio frequencies concurrently, use
all six WiFi antennas.

To Install the WiFi antennas

1. Insert the antenna base firmly into the appropriate

antenna mount.

2. Securely hand tighten the fastening collar.

3. Repeat for the remaining antennas.

7 8

2.4GHz 5GHz5GHz